2 files changed, 115 insertions, 0 deletions
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 50cf6a2ee69..c0a0f647879 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,3 +1,4 @@
 # Makefile for Versatile-specific clocks
 obj-$(CONFIG_ICST)		+= clk-icst.o
 obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
new file mode 100644
index 00000000000..e21a99cef37
--- /dev/null
+++ b/drivers/clk/versatile/clk-realview.c
@@ -0,0 +1,114 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+	u32 val;
+	struct icst_vco vco;
+
+	val = readl(sys_vcoreg);
+	vco.v = val & 0x1ff;
+	vco.r = (val >> 9) & 0x7f;
+	vco.s = (val >> 16) & 03;
+	return vco;
+}
+
+static void realview_oscvco_set(struct icst_vco vco)
+{
+	u32 val;
+
+	val = readl(sys_vcoreg) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	/* This magic unlocks the CM VCO so it can be controlled */
+	writel(0xa05f, sys_lock);
+	writel(val, sys_vcoreg);
+	/* This locks the CM again */
+	writel(0, sys_lock);
+}
+
+static const struct icst_params realview_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
+};
+
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+	.params = &realview_oscvco_params,
+	.getvco = realview_oscvco_get,
+	.setvco = realview_oscvco_set,
+};
+
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+	struct clk *clk;
+
+	sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+	if (is_pb1176)
+		sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+	else
+		sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+
+
+	/* APB clock dummy */
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	/* 24 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+				24000000);
+	clk_register_clkdev(clk, NULL, "dev:uart0");
+	clk_register_clkdev(clk, NULL, "dev:uart1");
+	clk_register_clkdev(clk, NULL, "dev:uart2");
+	clk_register_clkdev(clk, NULL, "fpga:kmi0");
+	clk_register_clkdev(clk, NULL, "fpga:kmi1");
+	clk_register_clkdev(clk, NULL, "fpga:mmc0");
+	clk_register_clkdev(clk, NULL, "dev:ssp0");
+	if (is_pb1176) {
+		/*
+		 * UART3 is on the dev chip in PB1176
+		 * UART4 only exists in PB1176
+		 */
+		clk_register_clkdev(clk, NULL, "dev:uart3");
+		clk_register_clkdev(clk, NULL, "dev:uart4");
+	} else
+		clk_register_clkdev(clk, NULL, "fpga:uart3");
+
+
+	/* 1 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+				      1000000);
+	clk_register_clkdev(clk, NULL, "sp804");
+
+	/* ICST VCO clock */
+	clk = icst_clk_register(NULL, &realview_icst_desc);
+	clk_register_clkdev(clk, NULL, "dev:clcd");
+	clk_register_clkdev(clk, NULL, "issp:clcd");
+}