summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/acpi_pm.c2
-rw-r--r--drivers/clocksource/i8253.c6
-rw-r--r--drivers/clocksource/tcb_clksrc.c4
3 files changed, 5 insertions, 7 deletions
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index effe7974aa9..6b5cf02c35c 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -143,7 +143,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
#ifndef CONFIG_X86_64
#include <asm/mach_timer.h>
#define PMTMR_EXPECTED_RATE \
- ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (PIT_TICK_RATE>>10))
/*
* Some boards have the PMTMR running way too fast. We check
* the PMTMR rate against PIT channel 2 to catch these cases.
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 27c49e60b7d..e7cab2da910 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -53,7 +53,7 @@ static cycle_t i8253_read(struct clocksource *cs)
count |= inb_p(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
+ if (count > PIT_LATCH) {
outb_p(0x34, PIT_MODE);
outb_p(PIT_LATCH & 0xff, PIT_CH0);
outb_p(PIT_LATCH >> 8, PIT_CH0);
@@ -114,8 +114,8 @@ static void init_pit_timer(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
/* binary, mode 2, LSB/MSB, ch 0 */
outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
- outb_p(LATCH >> 8 , PIT_CH0); /* MSB */
+ outb_p(PIT_LATCH & 0xff , PIT_CH0); /* LSB */
+ outb_p(PIT_LATCH >> 8 , PIT_CH0); /* MSB */
break;
case CLOCK_EVT_MODE_SHUTDOWN:
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 79c47e88d5d..55d0f95f82f 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -59,7 +59,6 @@ static struct clocksource clksrc = {
.rating = 200,
.read = tc_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 18,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -256,7 +255,6 @@ static int __init tcb_clksrc_init(void)
best_divisor_idx = i;
}
- clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
divided_rate / 1000000,
@@ -292,7 +290,7 @@ static int __init tcb_clksrc_init(void)
__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
/* and away we go! */
- clocksource_register(&clksrc);
+ clocksource_register_hz(&clksrc, divided_rate);
/* channel 2: periodic and oneshot timer support */
setup_clkevents(tc, clk32k_divisor_idx);