summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/acpi_pm.c24
-rw-r--r--drivers/clocksource/clksrc-dbx500-prcmu.c5
-rw-r--r--drivers/clocksource/cs5535-clockevt.c3
-rw-r--r--drivers/clocksource/cyclone.c2
-rw-r--r--drivers/clocksource/scx200_hrt.c24
-rw-r--r--drivers/clocksource/sh_cmt.c4
-rw-r--r--drivers/clocksource/sh_mtu2.c4
-rw-r--r--drivers/clocksource/sh_tmu.c4
8 files changed, 39 insertions, 31 deletions
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 6b5cf02c35c..82e882028fc 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/async.h>
#include <asm/io.h>
/*
@@ -179,17 +180,15 @@ static int verify_pmtmr_rate(void)
/* Number of reads we try to get two different values */
#define ACPI_PM_READ_CHECKS 10000
-static int __init init_acpi_pm_clocksource(void)
+static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie)
{
cycle_t value1, value2;
unsigned int i, j = 0;
- if (!pmtmr_ioport)
- return -ENODEV;
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
- udelay(100 * j);
+ usleep_range(100 * j, 100 * j + 100);
value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
@@ -203,25 +202,34 @@ static int __init init_acpi_pm_clocksource(void)
" 0x%#llx, 0x%#llx - aborting.\n",
value1, value2);
pmtmr_ioport = 0;
- return -EINVAL;
+ return;
}
if (i == ACPI_PM_READ_CHECKS) {
printk(KERN_INFO "PM-Timer failed consistency check "
" (0x%#llx) - aborting.\n", value1);
pmtmr_ioport = 0;
- return -ENODEV;
+ return;
}
}
if (verify_pmtmr_rate() != 0){
pmtmr_ioport = 0;
- return -ENODEV;
+ return;
}
- return clocksource_register_hz(&clocksource_acpi_pm,
+ clocksource_register_hz(&clocksource_acpi_pm,
PMTMR_TICKS_PER_SEC);
}
+static int __init init_acpi_pm_clocksource(void)
+{
+ if (!pmtmr_ioport)
+ return -ENODEV;
+
+ async_schedule(acpi_pm_clocksource_async, NULL);
+ return 0;
+}
+
/* We use fs_initcall because we want the PCI fixups to have run
* but we still need to load before device_initcall
*/
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index fb6b6d28b60..c26c369eb9e 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -52,7 +52,6 @@ static struct clocksource clocksource_dbx500_prcmu = {
.name = "dbx500-prcmu-timer",
.rating = 300,
.read = clksrc_dbx500_prcmu_read,
- .shift = 10,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -90,7 +89,5 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base)
setup_sched_clock(dbx500_prcmu_sched_clock_read,
32, RATE_32K);
#endif
- clocksource_calc_mult_shift(&clocksource_dbx500_prcmu,
- RATE_32K, SCHED_CLOCK_MIN_WRAP);
- clocksource_register(&clocksource_dbx500_prcmu);
+ clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index b7dab32ce63..540795cd076 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@ static struct clock_event_device cs5535_clockevent = {
.set_mode = mfgpt_set_mode,
.set_next_event = mfgpt_next_event,
.rating = 250,
- .cpumask = cpu_all_mask,
.shift = 32
};
@@ -133,7 +132,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
.name = DRV_NAME,
};
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 72f811f73e9..9e0998f2288 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -55,11 +55,11 @@ static int __init init_cyclone_clocksource(void)
}
/* even on 64bit systems, this is only 32bits: */
base = readl(reg);
+ iounmap(reg);
if (!base) {
printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
return -ENODEV;
}
- iounmap(reg);
/* setup PMCC: */
offset = base + CYCLONE_PMCC_OFFSET;
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index 27f4d9637b6..64f9e829443 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -49,9 +49,6 @@ static cycle_t read_hrt(struct clocksource *cs)
return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
}
-#define HRT_SHIFT_1 22
-#define HRT_SHIFT_27 26
-
static struct clocksource cs_hrt = {
.name = "scx200_hrt",
.rating = 250,
@@ -63,6 +60,7 @@ static struct clocksource cs_hrt = {
static int __init init_hrt_clocksource(void)
{
+ u32 freq;
/* Make sure scx200 has initialized the configuration block */
if (!scx200_cb_present())
return -ENODEV;
@@ -71,7 +69,7 @@ static int __init init_hrt_clocksource(void)
if (!request_region(scx200_cb_base + SCx200_TIMER_OFFSET,
SCx200_TIMER_SIZE,
"NatSemi SCx200 High-Resolution Timer")) {
- printk(KERN_WARNING NAME ": unable to lock timer region\n");
+ pr_warn("unable to lock timer region\n");
return -ENODEV;
}
@@ -79,19 +77,13 @@ static int __init init_hrt_clocksource(void)
outb(HR_TMEN | (mhz27 ? HR_TMCLKSEL : 0),
scx200_cb_base + SCx200_TMCNFG_OFFSET);
- if (mhz27) {
- cs_hrt.shift = HRT_SHIFT_27;
- cs_hrt.mult = clocksource_hz2mult((HRT_FREQ + ppm) * 27,
- cs_hrt.shift);
- } else {
- cs_hrt.shift = HRT_SHIFT_1;
- cs_hrt.mult = clocksource_hz2mult(HRT_FREQ + ppm,
- cs_hrt.shift);
- }
- printk(KERN_INFO "enabling scx200 high-res timer (%s MHz +%d ppm)\n",
- mhz27 ? "27":"1", ppm);
+ freq = (HRT_FREQ + ppm);
+ if (mhz27)
+ freq *= 27;
+
+ pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
- return clocksource_register(&cs_hrt);
+ return clocksource_register_hz(&cs_hrt, freq);
}
module_init(init_hrt_clocksource);
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index ca09bc421dd..32fe9ef5cc5 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -32,6 +32,7 @@
#include <linux/sh_timer.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/pm_domain.h>
struct sh_cmt_priv {
void __iomem *mapbase;
@@ -689,6 +690,9 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev)
struct sh_cmt_priv *p = platform_get_drvdata(pdev);
int ret;
+ if (!is_early_platform_device(pdev))
+ pm_genpd_dev_always_on(&pdev->dev, true);
+
if (p) {
dev_info(&pdev->dev, "kept as earlytimer\n");
return 0;
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index db8d5955bad..a2172f69041 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -31,6 +31,7 @@
#include <linux/sh_timer.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/pm_domain.h>
struct sh_mtu2_priv {
void __iomem *mapbase;
@@ -306,6 +307,9 @@ static int __devinit sh_mtu2_probe(struct platform_device *pdev)
struct sh_mtu2_priv *p = platform_get_drvdata(pdev);
int ret;
+ if (!is_early_platform_device(pdev))
+ pm_genpd_dev_always_on(&pdev->dev, true);
+
if (p) {
dev_info(&pdev->dev, "kept as earlytimer\n");
return 0;
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 079e96ad44e..97f54b634be 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -32,6 +32,7 @@
#include <linux/sh_timer.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/pm_domain.h>
struct sh_tmu_priv {
void __iomem *mapbase;
@@ -410,6 +411,9 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev)
struct sh_tmu_priv *p = platform_get_drvdata(pdev);
int ret;
+ if (!is_early_platform_device(pdev))
+ pm_genpd_dev_always_on(&pdev->dev, true);
+
if (p) {
dev_info(&pdev->dev, "kept as earlytimer\n");
return 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-13 22:59:26 +0000