diff options
Diffstat (limited to 'drivers/cpufreq/Kconfig.x86')
| -rw-r--r-- | drivers/cpufreq/Kconfig.x86 | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 new file mode 100644 index 00000000000..78ff7ee4895 --- /dev/null +++ b/drivers/cpufreq/Kconfig.x86 @@ -0,0 +1,255 @@ +# +# x86 CPU Frequency scaling drivers +# + +config X86_PCC_CPUFREQ + tristate "Processor Clocking Control interface driver" + depends on ACPI && ACPI_PROCESSOR + help + This driver adds support for the PCC interface. + + For details, take a look at: + <file:Documentation/cpu-freq/pcc-cpufreq.txt>. + + To compile this driver as a module, choose M here: the + module will be called pcc-cpufreq. + + If in doubt, say N. + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep. + + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config ELAN_CPUFREQ + tristate "AMD Elan SC400 and SC410" + select CPU_FREQ_TABLE + depends on MELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC400 and SC410 + processors. + + You need to specify the processor maximum speed as boot + parameter: elanfreq=maxspeed (in kHz) or as module + parameter "max_freq". + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on MELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + +config X86_POWERNOW_K6 + tristate "AMD Mobile K6-2/K6-3 PowerNow!" + select CPU_FREQ_TABLE + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K6-2+ and mobile + AMD K6-3+ processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7 + tristate "AMD Mobile Athlon/Duron PowerNow!" + select CPU_FREQ_TABLE + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K7 mobile processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7_ACPI + bool + depends on X86_POWERNOW_K7 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 + default y + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + select CPU_FREQ_TABLE + depends on ACPI && ACPI_PROCESSOR + help + This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. + + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + + For details, take a look at <file:Documentation/cpu-freq/>. + +config X86_GX_SUSPMOD + tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on X86_32 && PCI + help + This add the CPUFreq driver for NatSemi Geode processors which + support suspend modulation. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep (deprecated)" + select CPU_FREQ_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) + help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO_TABLE + bool "Built-in tables for Banias CPUs" + depends on X86_32 && X86_SPEEDSTEP_CENTRINO + default y + help + Use built-in tables for Banias CPUs if ACPI encoding + is not available. + + If in doubt, say N. + +config X86_SPEEDSTEP_ICH + tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" + select CPU_FREQ_TABLE + depends on X86_32 + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + ICH3 or ICH4 southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_SMI + tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" + select CPU_FREQ_TABLE + depends on X86_32 && EXPERIMENTAL + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) + on systems which have an Intel 440BX/ZX/MX southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for Intel Pentium 4 / XEON + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + + For details, take a look at <file:Documentation/cpu-freq/>. + + Unless you are absolutely sure say N. + +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on X86_32 && EXPERIMENTAL + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + platforms. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGRUN + tristate "Transmeta LongRun" + depends on X86_32 + help + This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors + which support LongRun. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGHAUL + tristate "VIA Cyrix III Longhaul" + select CPU_FREQ_TABLE + depends on X86_32 && ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" + select CPU_FREQ_TABLE + depends on X86_32 && EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. However, this driver + does not have any safeguards to prevent operating the CPU out of spec + and is thus considered dangerous. Please use the regular ACPI cpufreq + driver, enabled by CONFIG_X86_ACPI_CPUFREQ. + + If in doubt, say N. + +comment "shared options" + +config X86_SPEEDSTEP_LIB + tristate + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) + +config X86_SPEEDSTEP_RELAXED_CAP_CHECK + bool "Relaxed speedstep capability checks" + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + help + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This + option lets the probing code bypass some of those checks if the + parameter "relaxed_check=1" is passed to the module. + |