1 files changed, 44 insertions, 28 deletions

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 92c162af504..f657c571b18 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -166,8 +166,8 @@ try_again:
 		if (ret == -EPROBE_DEFER)
 			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret,
-				cpu);
+			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
+				ret);
 	} else {
 		*cdev = cpu_dev;
 		*creg = cpu_reg;
@@ -187,6 +187,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
+	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	int ret;
 
@@ -206,16 +207,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* OPPs might be populated at runtime, don't check for error here */
 	of_init_opp_table(cpu_dev);
 
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-	if (ret) {
-		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto out_put_node;
-	}
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		ret = -ENOMEM;
-		goto out_free_table;
+		goto out_put_node;
 	}
 
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
@@ -224,30 +219,51 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		transition_latency = CPUFREQ_ETERNAL;
 
 	if (!IS_ERR(cpu_reg)) {
-		struct dev_pm_opp *opp;
-		unsigned long min_uV, max_uV;
-		int i;
+		unsigned long opp_freq = 0;
 
 		/*
-		 * OPP is maintained in order of increasing frequency, and
-		 * freq_table initialised from OPP is therefore sorted in the
-		 * same order.
+		 * Disable any OPPs where the connected regulator isn't able to
+		 * provide the specified voltage and record minimum and maximum
+		 * voltage levels.
 		 */
-		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
-			;
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[0].frequency * 1000, true);
-		min_uV = dev_pm_opp_get_voltage(opp);
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[i-1].frequency * 1000, true);
-		max_uV = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
+		while (1) {
+			struct dev_pm_opp *opp;
+			unsigned long opp_uV, tol_uV;
+
+			rcu_read_lock();
+			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
+			if (IS_ERR(opp)) {
+				rcu_read_unlock();
+				break;
+			}
+			opp_uV = dev_pm_opp_get_voltage(opp);
+			rcu_read_unlock();
+
+			tol_uV = opp_uV * priv->voltage_tolerance / 100;
+			if (regulator_is_supported_voltage(cpu_reg, opp_uV,
+							   opp_uV + tol_uV)) {
+				if (opp_uV < min_uV)
+					min_uV = opp_uV;
+				if (opp_uV > max_uV)
+					max_uV = opp_uV;
+			} else {
+				dev_pm_opp_disable(cpu_dev, opp_freq);
+			}
+
+			opp_freq++;
+		}
+
 		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
 		if (ret > 0)
 			transition_latency += ret * 1000;
 	}
 
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		pr_err("failed to init cpufreq table: %d\n", ret);
+		goto out_free_priv;
+	}
+
 	/*
 	 * For now, just loading the cooling device;
 	 * thermal DT code takes care of matching them.
@@ -277,7 +293,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.transition_latency = transition_latency;
 
 	pd = cpufreq_get_driver_data();
-	if (pd && !pd->independent_clocks)
+	if (!pd || !pd->independent_clocks)
 		cpumask_setall(policy->cpus);
 
 	of_node_put(np);
@@ -286,9 +302,9 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 out_cooling_unregister:
 	cpufreq_cooling_unregister(priv->cdev);
-	kfree(priv);
-out_free_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_priv:
+	kfree(priv);
 out_put_node:
 	of_node_put(np);
 out_put_reg_clk: