diff options
Diffstat (limited to 'drivers/cpufreq/imx6q-cpufreq.c')
-rw-r--r-- | drivers/cpufreq/imx6q-cpufreq.c | 117 |
1 files changed, 34 insertions, 83 deletions
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index c3fd2a101ca..4b3f18e5f36 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -13,7 +13,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> @@ -35,73 +35,52 @@ static struct device *cpu_dev; static struct cpufreq_frequency_table *freq_table; static unsigned int transition_latency; -static int imx6q_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - static unsigned int imx6q_get_speed(unsigned int cpu) { return clk_get_rate(arm_clk) / 1000; } -static int imx6q_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) { - struct cpufreq_freqs freqs; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq_hz, volt, volt_old; - unsigned int index; + unsigned int old_freq, new_freq; int ret; - ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &index); - if (ret) { - dev_err(cpu_dev, "failed to match target frequency %d: %d\n", - target_freq, ret); - return ret; - } - - freqs.new = freq_table[index].frequency; - freq_hz = freqs.new * 1000; - freqs.old = clk_get_rate(arm_clk) / 1000; - - if (freqs.old == freqs.new) - return 0; + new_freq = freq_table[index].frequency; + freq_hz = new_freq * 1000; + old_freq = clk_get_rate(arm_clk) / 1000; rcu_read_lock(); - opp = opp_find_freq_ceil(cpu_dev, &freq_hz); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); return PTR_ERR(opp); } - volt = opp_get_voltage(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); volt_old = regulator_get_voltage(arm_reg); dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", - freqs.old / 1000, volt_old / 1000, - freqs.new / 1000, volt / 1000); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + old_freq / 1000, volt_old / 1000, + new_freq / 1000, volt / 1000); /* scaling up? scale voltage before frequency */ - if (freqs.new > freqs.old) { + if (new_freq > old_freq) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_err(cpu_dev, "failed to scale vddarm up: %d\n", ret); - freqs.new = freqs.old; - goto post_notify; + return ret; } /* * Need to increase vddpu and vddsoc for safety * if we are about to run at 1.2 GHz. */ - if (freqs.new == FREQ_1P2_GHZ / 1000) { + if (new_freq == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, PU_SOC_VOLTAGE_HIGH, 0); regulator_set_voltage_tol(soc_reg, @@ -121,21 +100,20 @@ static int imx6q_set_target(struct cpufreq_policy *policy, clk_set_parent(step_clk, pll2_pfd2_396m_clk); clk_set_parent(pll1_sw_clk, step_clk); if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { - clk_set_rate(pll1_sys_clk, freqs.new * 1000); + clk_set_rate(pll1_sys_clk, new_freq * 1000); clk_set_parent(pll1_sw_clk, pll1_sys_clk); } /* Ensure the arm clock divider is what we expect */ - ret = clk_set_rate(arm_clk, freqs.new * 1000); + ret = clk_set_rate(arm_clk, new_freq * 1000); if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); - freqs.new = freqs.old; - goto post_notify; + return ret; } /* scaling down? scale voltage after frequency */ - if (freqs.new < freqs.old) { + if (new_freq < old_freq) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_warn(cpu_dev, @@ -143,7 +121,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, ret = 0; } - if (freqs.old == FREQ_1P2_GHZ / 1000) { + if (old_freq == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, PU_SOC_VOLTAGE_NORMAL, 0); regulator_set_voltage_tol(soc_reg, @@ -151,55 +129,28 @@ static int imx6q_set_target(struct cpufreq_policy *policy, } } -post_notify: - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int imx6q_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret; - - ret = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (ret) { - dev_err(cpu_dev, "invalid frequency table: %d\n", ret); - return ret; - } - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = clk_get_rate(arm_clk) / 1000; - cpumask_setall(policy->cpus); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - return 0; } -static int imx6q_cpufreq_exit(struct cpufreq_policy *policy) +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, freq_table, transition_latency); } -static struct freq_attr *imx6q_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver imx6q_cpufreq_driver = { - .verify = imx6q_verify_speed, - .target = imx6q_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = imx6q_set_target, .get = imx6q_get_speed, .init = imx6q_cpufreq_init, - .exit = imx6q_cpufreq_exit, + .exit = cpufreq_generic_exit, .name = "imx6q-cpufreq", - .attr = imx6q_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int imx6q_cpufreq_probe(struct platform_device *pdev) { struct device_node *np; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long min_volt, max_volt; int num, ret; @@ -237,14 +188,14 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) } /* We expect an OPP table supplied by platform */ - num = opp_get_opp_count(cpu_dev); + num = dev_pm_opp_get_opp_count(cpu_dev); if (num < 0) { ret = num; dev_err(cpu_dev, "no OPP table is found: %d\n", ret); goto put_node; } - ret = opp_init_cpufreq_table(cpu_dev, &freq_table); + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); goto put_node; @@ -259,12 +210,12 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) * same order. */ rcu_read_lock(); - opp = opp_find_freq_exact(cpu_dev, + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); - min_volt = opp_get_voltage(opp); - opp = opp_find_freq_exact(cpu_dev, + min_volt = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[--num].frequency * 1000, true); - max_volt = opp_get_voltage(opp); + max_volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt); if (ret > 0) @@ -292,7 +243,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) return 0; free_freq_table: - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); put_node: of_node_put(np); return ret; @@ -301,7 +252,7 @@ put_node: static int imx6q_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&imx6q_cpufreq_driver); - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); return 0; } |