summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig.arm42
-rw-r--r--drivers/cpufreq/Makefile5
-rw-r--r--drivers/cpufreq/cpufreq.c24
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c58
-rw-r--r--drivers/cpufreq/db8500-cpufreq.c13
-rw-r--r--drivers/cpufreq/exynos-cpufreq.c6
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c70
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c536
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c347
-rw-r--r--drivers/cpufreq/omap-cpufreq.c72
-rw-r--r--drivers/cpufreq/s3c2416-cpufreq.c542
-rw-r--r--drivers/cpufreq/s3c64xx-cpufreq.c7
12 files changed, 1665 insertions, 57 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index e0664fed018..32d790dd818 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,33 @@
# ARM CPU Frequency scaling drivers
#
+config ARM_OMAP2PLUS_CPUFREQ
+ bool "TI OMAP2+"
+ default ARCH_OMAP2PLUS
+ select CPU_FREQ_TABLE
+
+config ARM_S3C2416_CPUFREQ
+ bool "S3C2416 CPU Frequency scaling support"
+ depends on CPU_S3C2416
+ help
+ This adds the CPUFreq driver for the Samsung S3C2416 and
+ S3C2450 SoC. The S3C2416 supports changing the rate of the
+ armdiv clock source and also entering a so called dynamic
+ voltage scaling mode in which it is possible to reduce the
+ core voltage of the cpu.
+
+ If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+ bool "Allow voltage scaling for S3C2416 arm core (EXPERIMENTAL)"
+ depends on ARM_S3C2416_CPUFREQ && REGULATOR && EXPERIMENTAL
+ help
+ Enable CPU voltage scaling when entering the dvs mode.
+ It uses information gathered through existing hardware and
+ tests but not documented in any datasheet.
+
+ If in doubt, say N.
+
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
@@ -25,6 +52,8 @@ config ARM_EXYNOS_CPUFREQ
bool "SAMSUNG EXYNOS SoCs"
depends on ARCH_EXYNOS
select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
+ select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+ select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250
default y
help
This adds the CPUFreq driver common part for Samsung
@@ -34,6 +63,19 @@ config ARM_EXYNOS_CPUFREQ
config ARM_EXYNOS4210_CPUFREQ
bool "Samsung EXYNOS4210"
+ depends on ARCH_EXYNOS
help
This adds the CPUFreq driver for Samsung EXYNOS4210
SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+ bool "Samsung EXYNOS4X12"
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4X12
+ SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+ bool "Samsung EXYNOS5250"
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS5250
+ SoC.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ac000fa76bb..9531fc2eda2 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -40,11 +40,14 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
##################################################################################
# ARM SoC drivers
obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 622013fb789..7f2f149ae40 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -126,6 +126,15 @@ static int __init init_cpufreq_transition_notifier_list(void)
}
pure_initcall(init_cpufreq_transition_notifier_list);
+static int off __read_mostly;
+int cpufreq_disabled(void)
+{
+ return off;
+}
+void disable_cpufreq(void)
+{
+ off = 1;
+}
static LIST_HEAD(cpufreq_governor_list);
static DEFINE_MUTEX(cpufreq_governor_mutex);
@@ -1441,6 +1450,9 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
{
int retval = -EINVAL;
+ if (cpufreq_disabled())
+ return -ENODEV;
+
pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
target_freq, relation);
if (cpu_online(policy->cpu) && cpufreq_driver->target)
@@ -1549,6 +1561,9 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
if (!governor)
return -EINVAL;
+ if (cpufreq_disabled())
+ return -ENODEV;
+
mutex_lock(&cpufreq_governor_mutex);
err = -EBUSY;
@@ -1572,6 +1587,9 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
if (!governor)
return;
+ if (cpufreq_disabled())
+ return;
+
#ifdef CONFIG_HOTPLUG_CPU
for_each_present_cpu(cpu) {
if (cpu_online(cpu))
@@ -1814,6 +1832,9 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
unsigned long flags;
int ret;
+ if (cpufreq_disabled())
+ return -ENODEV;
+
if (!driver_data || !driver_data->verify || !driver_data->init ||
((!driver_data->setpolicy) && (!driver_data->target)))
return -EINVAL;
@@ -1901,6 +1922,9 @@ static int __init cpufreq_core_init(void)
{
int cpu;
+ if (cpufreq_disabled())
+ return -ENODEV;
+
for_each_possible_cpu(cpu) {
per_cpu(cpufreq_policy_cpu, cpu) = -1;
init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index c3e0652520a..836e9b062e5 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -257,6 +257,62 @@ show_one(sampling_down_factor, sampling_down_factor);
show_one(ignore_nice_load, ignore_nice);
show_one(powersave_bias, powersave_bias);
+/**
+ * update_sampling_rate - update sampling rate effective immediately if needed.
+ * @new_rate: new sampling rate
+ *
+ * If new rate is smaller than the old, simply updaing
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example,
+ * if the original sampling_rate was 1 second and the requested new sampling
+ * rate is 10 ms because the user needs immediate reaction from ondemand
+ * governor, but not sure if higher frequency will be required or not,
+ * then, the governor may change the sampling rate too late; up to 1 second
+ * later. Thus, if we are reducing the sampling rate, we need to make the
+ * new value effective immediately.
+ */
+static void update_sampling_rate(unsigned int new_rate)
+{
+ int cpu;
+
+ dbs_tuners_ins.sampling_rate = new_rate
+ = max(new_rate, min_sampling_rate);
+
+ for_each_online_cpu(cpu) {
+ struct cpufreq_policy *policy;
+ struct cpu_dbs_info_s *dbs_info;
+ unsigned long next_sampling, appointed_at;
+
+ policy = cpufreq_cpu_get(cpu);
+ if (!policy)
+ continue;
+ dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
+ cpufreq_cpu_put(policy);
+
+ mutex_lock(&dbs_info->timer_mutex);
+
+ if (!delayed_work_pending(&dbs_info->work)) {
+ mutex_unlock(&dbs_info->timer_mutex);
+ continue;
+ }
+
+ next_sampling = jiffies + usecs_to_jiffies(new_rate);
+ appointed_at = dbs_info->work.timer.expires;
+
+
+ if (time_before(next_sampling, appointed_at)) {
+
+ mutex_unlock(&dbs_info->timer_mutex);
+ cancel_delayed_work_sync(&dbs_info->work);
+ mutex_lock(&dbs_info->timer_mutex);
+
+ schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
+ usecs_to_jiffies(new_rate));
+
+ }
+ mutex_unlock(&dbs_info->timer_mutex);
+ }
+}
+
static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
const char *buf, size_t count)
{
@@ -265,7 +321,7 @@ static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
- dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+ update_sampling_rate(input);
return count;
}
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index f5002015d82..a22ffa5bff9 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = {
},
[1] = {
.index = 1,
- .frequency = 300000,
+ .frequency = 400000,
},
[2] = {
.index = 2,
- .frequency = 600000,
+ .frequency = 800000,
},
[3] = {
/* Used for MAX_OPP, if available */
@@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
- if (!prcmu_is_u8400()) {
- freq_table[1].frequency = 400000;
- freq_table[2].frequency = 800000;
- if (prcmu_has_arm_maxopp())
- freq_table[3].frequency = 1000000;
- }
+ if (prcmu_has_arm_maxopp())
+ freq_table[3].frequency = 1000000;
+
pr_info("db8500-cpufreq : Available frequencies:\n");
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 5467879ea07..b243a7ee01f 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -210,6 +210,8 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
+ locking_frequency = exynos_getspeed(0);
+
/* set the transition latency value */
policy->cpuinfo.transition_latency = 100000;
@@ -252,6 +254,10 @@ static int __init exynos_cpufreq_init(void)
if (soc_is_exynos4210())
ret = exynos4210_cpufreq_init(exynos_info);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ ret = exynos4x12_cpufreq_init(exynos_info);
+ else if (soc_is_exynos5250())
+ ret = exynos5250_cpufreq_init(exynos_info);
else
pr_err("%s: CPU type not found\n", __func__);
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 065da5b702f..fb148fa2767 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -121,25 +121,25 @@ static void exynos4210_set_clkdiv(unsigned int div_index)
tmp = exynos4210_clkdiv_table[div_index].clkdiv;
- __raw_writel(tmp, S5P_CLKDIV_CPU);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
do {
- tmp = __raw_readl(S5P_CLKDIV_STATCPU);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
} while (tmp & 0x1111111);
/* Change Divider - CPU1 */
- tmp = __raw_readl(S5P_CLKDIV_CPU1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
tmp &= ~((0x7 << 4) | 0x7);
tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
(clkdiv_cpu1[div_index][1] << 0));
- __raw_writel(tmp, S5P_CLKDIV_CPU1);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
do {
- tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
} while (tmp & 0x11);
}
@@ -151,32 +151,32 @@ static void exynos4210_set_apll(unsigned int index)
clk_set_parent(moutcore, mout_mpll);
do {
- tmp = (__raw_readl(S5P_CLKMUX_STATCPU)
- >> S5P_CLKSRC_CPU_MUXCORE_SHIFT);
+ tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+ >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
tmp &= 0x7;
} while (tmp != 0x2);
/* 2. Set APLL Lock time */
- __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK);
+ __raw_writel(EXYNOS4_APLL_LOCKTIME, EXYNOS4_APLL_LOCK);
/* 3. Change PLL PMS values */
- tmp = __raw_readl(S5P_APLL_CON0);
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
tmp |= exynos4210_apll_pms_table[index];
- __raw_writel(tmp, S5P_APLL_CON0);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 4. wait_lock_time */
do {
- tmp = __raw_readl(S5P_APLL_CON0);
- } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT)));
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ } while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));
/* 5. MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
- tmp = __raw_readl(S5P_CLKMUX_STATCPU);
- tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
+ tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+ tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
+ } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}
bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
@@ -198,10 +198,10 @@ static void exynos4210_set_frequency(unsigned int old_index,
exynos4210_set_clkdiv(new_index);
/* 2. Change just s value in apll m,p,s value */
- tmp = __raw_readl(S5P_APLL_CON0);
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
- __raw_writel(tmp, S5P_APLL_CON0);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
} else {
/* Clock Configuration Procedure */
/* 1. Change the system clock divider values */
@@ -212,10 +212,10 @@ static void exynos4210_set_frequency(unsigned int old_index,
} else if (old_index < new_index) {
if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change just s value in apll m,p,s value */
- tmp = __raw_readl(S5P_APLL_CON0);
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
- __raw_writel(tmp, S5P_APLL_CON0);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
/* 2. Change the system clock divider values */
exynos4210_set_clkdiv(new_index);
@@ -253,24 +253,24 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
if (IS_ERR(mout_apll))
goto err_mout_apll;
- tmp = __raw_readl(S5P_CLKDIV_CPU);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
- tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK |
- S5P_CLKDIV_CPU0_COREM0_MASK |
- S5P_CLKDIV_CPU0_COREM1_MASK |
- S5P_CLKDIV_CPU0_PERIPH_MASK |
- S5P_CLKDIV_CPU0_ATB_MASK |
- S5P_CLKDIV_CPU0_PCLKDBG_MASK |
- S5P_CLKDIV_CPU0_APLL_MASK);
-
- tmp |= ((clkdiv_cpu0[i][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
- (clkdiv_cpu0[i][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
- (clkdiv_cpu0[i][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
- (clkdiv_cpu0[i][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
- (clkdiv_cpu0[i][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
- (clkdiv_cpu0[i][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
- (clkdiv_cpu0[i][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
+ tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
+ EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
+ EXYNOS4_CLKDIV_CPU0_ATB_MASK |
+ EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
+ EXYNOS4_CLKDIV_CPU0_APLL_MASK);
+
+ tmp |= ((clkdiv_cpu0[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
exynos4210_clkdiv_table[i].clkdiv = tmp;
}
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
new file mode 100644
index 00000000000..8c5a7afa5b0
--- /dev/null
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4X12 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END (L13 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+ unsigned int index;
+ unsigned int clkdiv;
+ unsigned int clkdiv1;
+};
+
+static unsigned int exynos4x12_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
+ {L0, 1500 * 1000},
+ {L1, 1400 * 1000},
+ {L2, 1300 * 1000},
+ {L3, 1200 * 1000},
+ {L4, 1100 * 1000},
+ {L5, 1000 * 1000},
+ {L6, 900 * 1000},
+ {L7, 800 * 1000},
+ {L8, 700 * 1000},
+ {L9, 600 * 1000},
+ {L10, 500 * 1000},
+ {L11, 400 * 1000},
+ {L12, 300 * 1000},
+ {L13, 200 * 1000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos4x12_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_4212[CPUFREQ_LEVEL_END][8] = {
+ /*
+ * Clock divider value for following
+ * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+ * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ */
+ /* ARM L0: 1500 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 0, 3, 6, 0, 4, 1, 2, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 0, 2, 5, 0, 4, 1, 1, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 0, 2, 4, 0, 2, 1, 1, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu0_4412[CPUFREQ_LEVEL_END][8] = {
+ /*
+ * Clock divider value for following
+ * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+ * DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+ */
+ /* ARM L0: 1500 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 0, 3, 7, 0, 6, 1, 2, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 0, 3, 7, 0, 5, 1, 2, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 0, 3, 6, 0, 4, 1, 2, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 0, 2, 5, 0, 4, 1, 1, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 0, 2, 5, 0, 3, 1, 1, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 0, 2, 4, 0, 3, 1, 1, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 0, 2, 4, 0, 2, 1, 1, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4212[CPUFREQ_LEVEL_END][2] = {
+ /* Clock divider value for following
+ * { DIVCOPY, DIVHPM }
+ */
+ /* ARM L0: 1500 MHz */
+ { 6, 0 },
+
+ /* ARM L1: 1400 MHz */
+ { 6, 0 },
+
+ /* ARM L2: 1300 MHz */
+ { 5, 0 },
+
+ /* ARM L3: 1200 MHz */
+ { 5, 0 },
+
+ /* ARM L4: 1100 MHz */
+ { 4, 0 },
+
+ /* ARM L5: 1000 MHz */
+ { 4, 0 },
+
+ /* ARM L6: 900 MHz */
+ { 3, 0 },
+
+ /* ARM L7: 800 MHz */
+ { 3, 0 },
+
+ /* ARM L8: 700 MHz */
+ { 3, 0 },
+
+ /* ARM L9: 600 MHz */
+ { 3, 0 },
+
+ /* ARM L10: 500 MHz */
+ { 3, 0 },
+
+ /* ARM L11: 400 MHz */
+ { 3, 0 },
+
+ /* ARM L12: 300 MHz */
+ { 3, 0 },
+
+ /* ARM L13: 200 MHz */
+ { 3, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4412[CPUFREQ_LEVEL_END][3] = {
+ /* Clock divider value for following
+ * { DIVCOPY, DIVHPM, DIVCORES }
+ */
+ /* ARM L0: 1500 MHz */
+ { 6, 0, 7 },
+
+ /* ARM L1: 1400 MHz */
+ { 6, 0, 6 },
+
+ /* ARM L2: 1300 MHz */
+ { 5, 0, 6 },
+
+ /* ARM L3: 1200 MHz */
+ { 5, 0, 5 },
+
+ /* ARM L4: 1100 MHz */
+ { 4, 0, 5 },
+
+ /* ARM L5: 1000 MHz */
+ { 4, 0, 4 },
+
+ /* ARM L6: 900 MHz */
+ { 3, 0, 4 },
+
+ /* ARM L7: 800 MHz */
+ { 3, 0, 3 },
+
+ /* ARM L8: 700 MHz */
+ { 3, 0, 3 },
+
+ /* ARM L9: 600 MHz */
+ { 3, 0, 2 },
+
+ /* ARM L10: 500 MHz */
+ { 3, 0, 2 },
+
+ /* ARM L11: 400 MHz */
+ { 3, 0, 1 },
+
+ /* ARM L12: 300 MHz */
+ { 3, 0, 1 },
+
+ /* ARM L13: 200 MHz */
+ { 3, 0, 0 },
+};
+
+static unsigned int exynos4x12_apll_pms_table[CPUFREQ_LEVEL_END] = {
+ /* APLL FOUT L0: 1500 MHz */
+ ((250 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L1: 1400 MHz */
+ ((175 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L2: 1300 MHz */
+ ((325 << 16) | (6 << 8) | (0x0)),
+
+ /* APLL FOUT L3: 1200 MHz */
+ ((200 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L4: 1100 MHz */
+ ((275 << 16) | (6 << 8) | (0x0)),
+
+ /* APLL FOUT L5: 1000 MHz */
+ ((125 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L6: 900 MHz */
+ ((150 << 16) | (4 << 8) | (0x0)),
+
+ /* APLL FOUT L7: 800 MHz */
+ ((100 << 16) | (3 << 8) | (0x0)),
+
+ /* APLL FOUT L8: 700 MHz */
+ ((175 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L9: 600 MHz */
+ ((200 << 16) | (4 << 8) | (0x1)),
+
+ /* APLL FOUT L10: 500 MHz */
+ ((125 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L11 400 MHz */
+ ((100 << 16) | (3 << 8) | (0x1)),
+
+ /* APLL FOUT L12: 300 MHz */
+ ((200 << 16) | (4 << 8) | (0x2)),
+
+ /* APLL FOUT L13: 200 MHz */
+ ((100 << 16) | (3 << 8) | (0x2)),
+};
+
+static const unsigned int asv_voltage_4x12[CPUFREQ_LEVEL_END] = {
+ 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
+ 1000000, 987500, 975000, 950000, 925000, 900000, 900000
+};
+
+static void exynos4x12_set_clkdiv(unsigned int div_index)
+{
+ unsigned int tmp;
+ unsigned int stat_cpu1;
+
+ /* Change Divider - CPU0 */
+
+ tmp = exynos4x12_clkdiv_table[div_index].clkdiv;
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+
+ while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+ cpu_relax();
+
+ /* Change Divider - CPU1 */
+ tmp = exynos4x12_clkdiv_table[div_index].clkdiv1;
+
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+ if (soc_is_exynos4212())
+ stat_cpu1 = 0x11;
+ else
+ stat_cpu1 = 0x111;
+
+ while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+ cpu_relax();
+}
+
+static void exynos4x12_set_apll(unsigned int index)
+{
+ unsigned int tmp, pdiv;
+
+ /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+ clk_set_parent(moutcore, mout_mpll);
+
+ do {
+ cpu_relax();
+ tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+ >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
+ tmp &= 0x7;
+ } while (tmp != 0x2);
+
+ /* 2. Set APLL Lock time */
+ pdiv = ((exynos4x12_apll_pms_table[index] >> 8) & 0x3f);
+
+ __raw_writel((pdiv * 250), EXYNOS4_APLL_LOCK);
+
+ /* 3. Change PLL PMS values */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+ tmp |= exynos4x12_apll_pms_table[index];
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+ /* 4. wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ } while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));
+
+ /* 5. MUX_CORE_SEL = APLL */
+ clk_set_parent(moutcore, mout_apll);
+
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+ tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
+ } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
+}
+
+bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index)
+{
+ unsigned int old_pm = exynos4x12_apll_pms_table[old_index] >> 8;
+ unsigned int new_pm = exynos4x12_apll_pms_table[new_index] >> 8;
+
+ return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos4x12_set_frequency(unsigned int old_index,
+ unsigned int new_index)
+{
+ unsigned int tmp;
+
+ if (old_index > new_index) {
+ if (!exynos4x12_pms_change(old_index, new_index)) {
+ /* 1. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ /* 2. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ /* 2. Change the apll m,p,s value */
+ exynos4x12_set_apll(new_index);
+ }
+ } else if (old_index < new_index) {
+ if (!exynos4x12_pms_change(old_index, new_index)) {
+ /* 1. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS4_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS4_APLL_CON0);
+ /* 2. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the apll m,p,s value */
+ exynos4x12_set_apll(new_index);
+ /* 2. Change the system clock divider values */
+ exynos4x12_set_clkdiv(new_index);
+ }
+ }
+}
+
+static void __init set_volt_table(void)
+{
+ unsigned int i;
+
+ max_support_idx = L1;
+
+ /* Not supported */
+ exynos4x12_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+
+ for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+ exynos4x12_volt_table[i] = asv_voltage_4x12[i];
+}
+
+int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
+{
+ int i;
+ unsigned int tmp;
+ unsigned long rate;
+
+ set_volt_table();
+
+ cpu_clk = clk_get(NULL, "armclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ moutcore = clk_get(NULL, "moutcore");
+ if (IS_ERR(moutcore))
+ goto err_moutcore;
+
+ mout_mpll = clk_get(NULL, "mout_mpll");
+ if (IS_ERR(mout_mpll))
+ goto err_mout_mpll;
+
+ rate = clk_get_rate(mout_mpll) / 1000;
+
+ mout_apll = clk_get(NULL, "mout_apll");
+ if (IS_ERR(mout_apll))
+ goto err_mout_apll;
+
+ for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+
+ exynos4x12_clkdiv_table[i].index = i;
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
+
+ tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
+ EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
+ EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
+ EXYNOS4_CLKDIV_CPU0_ATB_MASK |
+ EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
+ EXYNOS4_CLKDIV_CPU0_APLL_MASK);
+
+ if (soc_is_exynos4212()) {
+ tmp |= ((clkdiv_cpu0_4212[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0_4212[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0_4212[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0_4212[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0_4212[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0_4212[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0_4212[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
+ } else {
+ tmp &= ~EXYNOS4_CLKDIV_CPU0_CORE2_MASK;
+
+ tmp |= ((clkdiv_cpu0_4412[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0_4412[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0_4412[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0_4412[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0_4412[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0_4412[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0_4412[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) |
+ (clkdiv_cpu0_4412[i][7] << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT));
+ }
+
+ exynos4x12_clkdiv_table[i].clkdiv = tmp;
+
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
+
+ if (soc_is_exynos4212()) {
+ tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+ EXYNOS4_CLKDIV_CPU1_HPM_MASK);
+ tmp |= ((clkdiv_cpu1_4212[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+ (clkdiv_cpu1_4212[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT));
+ } else {
+ tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+ EXYNOS4_CLKDIV_CPU1_HPM_MASK |
+ EXYNOS4_CLKDIV_CPU1_CORES_MASK);
+ tmp |= ((clkdiv_cpu1_4412[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+ (clkdiv_cpu1_4412[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) |
+ (clkdiv_cpu1_4412[i][2] << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT));
+ }
+ exynos4x12_clkdiv_table[i].clkdiv1 = tmp;
+ }
+
+ info->mpll_freq_khz = rate;
+ info->pm_lock_idx = L5;
+ info->pll_safe_idx = L7;
+ info->max_support_idx = max_support_idx;
+ info->min_support_idx = min_support_idx;
+ info->cpu_clk = cpu_clk;
+ info->volt_table = exynos4x12_volt_table;
+ info->freq_table = exynos4x12_freq_table;
+ info->set_freq = exynos4x12_set_frequency;
+ info->need_apll_change = exynos4x12_pms_change;
+
+ return 0;
+
+err_mout_apll:
+ clk_put(mout_mpll);
+err_mout_mpll:
+ clk_put(moutcore);
+err_moutcore:
+ clk_put(cpu_clk);
+
+ pr_debug("%s: failed initialization\n", __func__);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(exynos4x12_cpufreq_init);
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
new file mode 100644
index 00000000000..a88331644eb
--- /dev/null
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS5250 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END (L15 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+ unsigned int index;
+ unsigned int clkdiv;
+ unsigned int clkdiv1;
+};
+
+static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos5250_freq_table[] = {
+ {L0, 1700 * 1000},
+ {L1, 1600 * 1000},
+ {L2, 1500 * 1000},
+ {L3, 1400 * 1000},
+ {L4, 1300 * 1000},
+ {L5, 1200 * 1000},
+ {L6, 1100 * 1000},
+ {L7, 1000 * 1000},
+ {L8, 900 * 1000},
+ {L9, 800 * 1000},
+ {L10, 700 * 1000},
+ {L11, 600 * 1000},
+ {L12, 500 * 1000},
+ {L13, 400 * 1000},
+ {L14, 300 * 1000},
+ {L15, 200 * 1000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
+ /*
+ * Clock divider value for following
+ * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
+ */
+ { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1700 MHz - N/A */
+ { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1600 MHz - N/A */
+ { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1500 MHz - N/A */
+ { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1400 MHz */
+ { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1300 MHz */
+ { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1200 MHz */
+ { 0, 2, 7, 7, 5, 1, 2, 0 }, /* 1100 MHz */
+ { 0, 2, 7, 7, 4, 1, 2, 0 }, /* 1000 MHz */
+ { 0, 2, 7, 7, 4, 1, 2, 0 }, /* 900 MHz */
+ { 0, 2, 7, 7, 3, 1, 1, 0 }, /* 800 MHz */
+ { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 700 MHz */
+ { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 600 MHz */
+ { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 500 MHz */
+ { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 400 MHz */
+ { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 300 MHz */
+ { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 200 MHz */
+};
+
+static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
+ /* Clock divider value for following
+ * { COPY, HPM }
+ */
+ { 0, 2 }, /* 1700 MHz - N/A */
+ { 0, 2 }, /* 1600 MHz - N/A */
+ { 0, 2 }, /* 1500 MHz - N/A */
+ { 0, 2 }, /* 1400 MHz */
+ { 0, 2 }, /* 1300 MHz */
+ { 0, 2 }, /* 1200 MHz */
+ { 0, 2 }, /* 1100 MHz */
+ { 0, 2 }, /* 1000 MHz */
+ { 0, 2 }, /* 900 MHz */
+ { 0, 2 }, /* 800 MHz */
+ { 0, 2 }, /* 700 MHz */
+ { 0, 2 }, /* 600 MHz */
+ { 0, 2 }, /* 500 MHz */
+ { 0, 2 }, /* 400 MHz */
+ { 0, 2 }, /* 300 MHz */
+ { 0, 2 }, /* 200 MHz */
+};
+
+static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
+ (0), /* 1700 MHz - N/A */
+ (0), /* 1600 MHz - N/A */
+ (0), /* 1500 MHz - N/A */
+ (0), /* 1400 MHz */
+ ((325 << 16) | (6 << 8) | 0), /* 1300 MHz */
+ ((200 << 16) | (4 << 8) | 0), /* 1200 MHz */
+ ((275 << 16) | (6 << 8) | 0), /* 1100 MHz */
+ ((125 << 16) | (3 << 8) | 0), /* 1000 MHz */
+ ((150 << 16) | (4 << 8) | 0), /* 900 MHz */
+ ((100 << 16) | (3 << 8) | 0), /* 800 MHz */
+ ((175 << 16) | (3 << 8) | 1), /* 700 MHz */
+ ((200 << 16) | (4 << 8) | 1), /* 600 MHz */
+ ((125 << 16) | (3 << 8) | 1), /* 500 MHz */
+ ((100 << 16) | (3 << 8) | 1), /* 400 MHz */
+ ((200 << 16) | (4 << 8) | 2), /* 300 MHz */
+ ((100 << 16) | (3 << 8) | 2), /* 200 MHz */
+};
+
+/* ASV group voltage table */
+static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
+ 0, 0, 0, 0, 0, 0, 0, /* 1700 MHz ~ 1100 MHz Not supported */
+ 1175000, 1125000, 1075000, 1050000, 1000000,
+ 950000, 925000, 925000, 900000
+};
+
+static void set_clkdiv(unsigned int div_index)
+{
+ unsigned int tmp;
+
+ /* Change Divider - CPU0 */
+
+ tmp = exynos5250_clkdiv_table[div_index].clkdiv;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+
+ while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+ cpu_relax();
+
+ /* Change Divider - CPU1 */
+ tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+
+ while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+ cpu_relax();
+}
+
+static void set_apll(unsigned int new_index,
+ unsigned int old_index)
+{
+ unsigned int tmp, pdiv;
+
+ /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+ clk_set_parent(moutcore, mout_mpll);
+
+ do {
+ cpu_relax();
+ tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+ tmp &= 0x7;
+ } while (tmp != 0x2);
+
+ /* 2. Set APLL Lock time */
+ pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
+
+ __raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
+
+ /* 3. Change PLL PMS values */
+ tmp = __raw_readl(EXYNOS5_APLL_CON0);
+ tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+ tmp |= exynos5_apll_pms_table[new_index];
+ __raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+ /* 4. wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS5_APLL_CON0);
+ } while (!(tmp & (0x1 << 29)));
+
+ /* 5. MUX_CORE_SEL = APLL */
+ clk_set_parent(moutcore, mout_apll);
+
+ do {
+ cpu_relax();
+ tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+ tmp &= (0x7 << 16);
+ } while (tmp != (0x1 << 16));
+
+}
+
+bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
+{
+ unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
+ unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
+
+ return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos5250_set_frequency(unsigned int old_index,
+ unsigned int new_index)
+{
+ unsigned int tmp;
+
+ if (old_index > new_index) {
+ if (!exynos5250_pms_change(old_index, new_index)) {
+ /* 1. Change the system clock divider values */
+ set_clkdiv(new_index);
+ /* 2. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS5_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the system clock divider values */
+ set_clkdiv(new_index);
+ /* 2. Change the apll m,p,s value */
+ set_apll(new_index, old_index);
+ }
+ } else if (old_index < new_index) {
+ if (!exynos5250_pms_change(old_index, new_index)) {
+ /* 1. Change just s value in apll m,p,s value */
+ tmp = __raw_readl(EXYNOS5_APLL_CON0);
+ tmp &= ~(0x7 << 0);
+ tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ __raw_writel(tmp, EXYNOS5_APLL_CON0);
+ /* 2. Change the system clock divider values */
+ set_clkdiv(new_index);
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the apll m,p,s value */
+ set_apll(new_index, old_index);
+ /* 2. Change the system clock divider values */
+ set_clkdiv(new_index);
+ }
+ }
+}
+
+static void __init set_volt_table(void)
+{
+ unsigned int i;
+
+ exynos5250_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L1].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L2].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L3].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L4].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L5].frequency = CPUFREQ_ENTRY_INVALID;
+ exynos5250_freq_table[L6].frequency = CPUFREQ_ENTRY_INVALID;
+
+ max_support_idx = L7;
+
+ for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+ exynos5250_volt_table[i] = asv_voltage_5250[i];
+}
+
+int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
+{
+ int i;
+ unsigned int tmp;
+ unsigned long rate;
+
+ set_volt_table();
+
+ cpu_clk = clk_get(NULL, "armclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ moutcore = clk_get(NULL, "mout_cpu");
+ if (IS_ERR(moutcore))
+ goto err_moutcore;
+
+ mout_mpll = clk_get(NULL, "mout_mpll");
+ if (IS_ERR(mout_mpll))
+ goto err_mout_mpll;
+
+ rate = clk_get_rate(mout_mpll) / 1000;
+
+ mout_apll = clk_get(NULL, "mout_apll");
+ if (IS_ERR(mout_apll))
+ goto err_mout_apll;
+
+ for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+
+ exynos5250_clkdiv_table[i].index = i;
+
+ tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
+
+ tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
+ (0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
+ (0x7 << 24) | (0x7 << 28));
+
+ tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
+ (clkdiv_cpu0_5250[i][1] << 4) |
+ (clkdiv_cpu0_5250[i][2] << 8) |
+ (clkdiv_cpu0_5250[i][3] << 12) |
+ (clkdiv_cpu0_5250[i][4] << 16) |
+ (clkdiv_cpu0_5250[i][5] << 20) |
+ (clkdiv_cpu0_5250[i][6] << 24) |
+ (clkdiv_cpu0_5250[i][7] << 28));
+
+ exynos5250_clkdiv_table[i].clkdiv = tmp;
+
+ tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
+
+ tmp &= ~((0x7 << 0) | (0x7 << 4));
+
+ tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
+ (clkdiv_cpu1_5250[i][1] << 4));
+
+ exynos5250_clkdiv_table[i].clkdiv1 = tmp;
+ }
+
+ info->mpll_freq_khz = rate;
+ /* 1000Mhz */
+ info->pm_lock_idx = L7;
+ /* 800Mhz */
+ info->pll_safe_idx = L9;
+ info->max_support_idx = max_support_idx;
+ info->min_support_idx = min_support_idx;
+ info->cpu_clk = cpu_clk;
+ info->volt_table = exynos5250_volt_table;
+ info->freq_table = exynos5250_freq_table;
+ info->set_freq = exynos5250_set_frequency;
+ info->need_apll_change = exynos5250_pms_change;
+
+ return 0;
+
+err_mout_apll:
+ clk_put(mout_mpll);
+err_mout_mpll:
+ clk_put(moutcore);
+err_moutcore:
+ clk_put(cpu_clk);
+
+ pr_err("%s: failed initialization\n", __func__);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(exynos5250_cpufreq_init);
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 3093ca6152c..17fa04d08be 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -25,6 +25,7 @@
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <linux/regulator/consumer.h>
#include <asm/smp_plat.h>
#include <asm/cpu.h>
@@ -36,6 +37,9 @@
#include <mach/hardware.h>
+/* OPP tolerance in percentage */
+#define OPP_TOLERANCE 4
+
#ifdef CONFIG_SMP
struct lpj_info {
unsigned long ref;
@@ -51,6 +55,7 @@ static atomic_t freq_table_users = ATOMIC_INIT(0);
static struct clk *mpu_clk;
static char *mpu_clk_name;
static struct device *mpu_dev;
+static struct regulator *mpu_reg;
static int omap_verify_speed(struct cpufreq_policy *policy)
{
@@ -75,8 +80,10 @@ static int omap_target(struct cpufreq_policy *policy,
unsigned int relation)
{
unsigned int i;
- int ret = 0;
+ int r, ret = 0;
struct cpufreq_freqs freqs;
+ struct opp *opp;
+ unsigned long freq, volt = 0, volt_old = 0, tol = 0;
if (!freq_table) {
dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__,
@@ -110,13 +117,50 @@ static int omap_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
-#ifdef CONFIG_CPU_FREQ_DEBUG
- pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new);
-#endif
+ freq = freqs.new * 1000;
+
+ if (mpu_reg) {
+ opp = opp_find_freq_ceil(mpu_dev, &freq);
+ if (IS_ERR(opp)) {
+ dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
+ __func__, freqs.new);
+ return -EINVAL;
+ }
+ volt = opp_get_voltage(opp);
+ tol = volt * OPP_TOLERANCE / 100;
+ volt_old = regulator_get_voltage(mpu_reg);
+ }
+
+ dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n",
+ freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
+ freqs.new / 1000, volt ? volt / 1000 : -1);
+
+ /* scaling up? scale voltage before frequency */
+ if (mpu_reg && (freqs.new > freqs.old)) {
+ r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
+ if (r < 0) {
+ dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
+ __func__);
+ freqs.new = freqs.old;
+ goto done;
+ }
+ }
ret = clk_set_rate(mpu_clk, freqs.new * 1000);
- freqs.new = omap_getspeed(policy->cpu);
+ /* scaling down? scale voltage after frequency */
+ if (mpu_reg && (freqs.new < freqs.old)) {
+ r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
+ if (r < 0) {
+ dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
+ __func__);
+ ret = clk_set_rate(mpu_clk, freqs.old * 1000);
+ freqs.new = freqs.old;
+ goto done;
+ }
+ }
+
+ freqs.new = omap_getspeed(policy->cpu);
#ifdef CONFIG_SMP
/*
* Note that loops_per_jiffy is not updated on SMP systems in
@@ -143,6 +187,7 @@ static int omap_target(struct cpufreq_policy *policy,
freqs.new);
#endif
+done:
/* notifiers */
for_each_cpu(i, policy->cpus) {
freqs.cpu = i;
@@ -259,6 +304,23 @@ static int __init omap_cpufreq_init(void)
return -EINVAL;
}
+ mpu_reg = regulator_get(mpu_dev, "vcc");
+ if (IS_ERR(mpu_reg)) {
+ pr_warning("%s: unable to get MPU regulator\n", __func__);
+ mpu_reg = NULL;
+ } else {
+ /*
+ * Ensure physical regulator is present.
+ * (e.g. could be dummy regulator.)
+ */
+ if (regulator_get_voltage(mpu_reg) < 0) {
+ pr_warn("%s: physical regulator not present for MPU\n",
+ __func__);
+ regulator_put(mpu_reg);
+ mpu_reg = NULL;
+ }
+ }
+
return cpufreq_register_driver(&omap_driver);
}
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
new file mode 100644
index 00000000000..50d2f15a3c8
--- /dev/null
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -0,0 +1,542 @@
+/*
+ * S3C2416/2450 CPUfreq Support
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on s3c64xx_cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+
+static DEFINE_MUTEX(cpufreq_lock);
+
+struct s3c2416_data {
+ struct clk *armdiv;
+ struct clk *armclk;
+ struct clk *hclk;
+
+ unsigned long regulator_latency;
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct regulator *vddarm;
+#endif
+
+ struct cpufreq_frequency_table *freq_table;
+
+ bool is_dvs;
+ bool disable_dvs;
+};
+
+static struct s3c2416_data s3c2416_cpufreq;
+
+struct s3c2416_dvfs {
+ unsigned int vddarm_min;
+ unsigned int vddarm_max;
+};
+
+/* pseudo-frequency for dvs mode */
+#define FREQ_DVS 132333
+
+/* frequency to sleep and reboot in
+ * it's essential to leave dvs, as some boards do not reconfigure the
+ * regulator on reboot
+ */
+#define FREQ_SLEEP 133333
+
+/* Sources for the ARMCLK */
+#define SOURCE_HCLK 0
+#define SOURCE_ARMDIV 1
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+/* S3C2416 only supports changing the voltage in the dvs-mode.
+ * Voltages down to 1.0V seem to work, so we take what the regulator
+ * can get us.
+ */
+static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
+ [SOURCE_HCLK] = { 950000, 1250000 },
+ [SOURCE_ARMDIV] = { 1250000, 1350000 },
+};
+#endif
+
+static struct cpufreq_frequency_table s3c2416_freq_table[] = {
+ { SOURCE_HCLK, FREQ_DVS },
+ { SOURCE_ARMDIV, 133333 },
+ { SOURCE_ARMDIV, 266666 },
+ { SOURCE_ARMDIV, 400000 },
+ { 0, CPUFREQ_TABLE_END },
+};
+
+static struct cpufreq_frequency_table s3c2450_freq_table[] = {
+ { SOURCE_HCLK, FREQ_DVS },
+ { SOURCE_ARMDIV, 133500 },
+ { SOURCE_ARMDIV, 267000 },
+ { SOURCE_ARMDIV, 534000 },
+ { 0, CPUFREQ_TABLE_END },
+};
+
+static int s3c2416_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, s3c_freq->freq_table);
+}
+
+static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+ if (cpu != 0)
+ return 0;
+
+ /* return our pseudo-frequency when in dvs mode */
+ if (s3c_freq->is_dvs)
+ return FREQ_DVS;
+
+ return clk_get_rate(s3c_freq->armclk) / 1000;
+}
+
+static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
+ unsigned int freq)
+{
+ int ret;
+
+ if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
+ ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
+ freq, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct s3c2416_dvfs *dvfs;
+#endif
+ int ret;
+
+ if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: already in dvs mode, nothing to do\n");
+ return 0;
+ }
+
+ pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
+ return ret;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ /* changing the core voltage is only allowed when in dvs mode */
+ if (s3c_freq->vddarm) {
+ dvfs = &s3c2416_dvfs_table[idx];
+
+ pr_debug("cpufreq: setting regultor to %d-%d\n",
+ dvfs->vddarm_min, dvfs->vddarm_max);
+ ret = regulator_set_voltage(s3c_freq->vddarm,
+ dvfs->vddarm_min,
+ dvfs->vddarm_max);
+
+ /* when lowering the voltage failed, there is nothing to do */
+ if (ret != 0)
+ pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+ }
+#endif
+
+ s3c_freq->is_dvs = 1;
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct s3c2416_dvfs *dvfs;
+#endif
+ int ret;
+
+ if (!s3c_freq->is_dvs) {
+ pr_debug("cpufreq: not in dvs mode, so can't leave\n");
+ return 0;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ if (s3c_freq->vddarm) {
+ dvfs = &s3c2416_dvfs_table[idx];
+
+ pr_debug("cpufreq: setting regultor to %d-%d\n",
+ dvfs->vddarm_min, dvfs->vddarm_max);
+ ret = regulator_set_voltage(s3c_freq->vddarm,
+ dvfs->vddarm_min,
+ dvfs->vddarm_max);
+ if (ret != 0) {
+ pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+ return ret;
+ }
+ }
+#endif
+
+ /* force armdiv to hclk frequency for transition from dvs*/
+ if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
+ pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to to set the armdiv to %lukHz: %d\n",
+ clk_get_rate(s3c_freq->hclk) / 1000, ret);
+ return ret;
+ }
+ }
+
+ pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
+ clk_get_rate(s3c_freq->armdiv) / 1000);
+
+ ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
+ ret);
+ return ret;
+ }
+
+ s3c_freq->is_dvs = 0;
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ struct cpufreq_freqs freqs;
+ int idx, ret, to_dvs = 0;
+ unsigned int i;
+
+ mutex_lock(&cpufreq_lock);
+
+ pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation);
+
+ ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table,
+ target_freq, relation, &i);
+ if (ret != 0)
+ goto out;
+
+ idx = s3c_freq->freq_table[i].index;
+
+ if (idx == SOURCE_HCLK)
+ to_dvs = 1;
+
+ /* switching to dvs when it's not allowed */
+ if (to_dvs && s3c_freq->disable_dvs) {
+ pr_debug("cpufreq: entering dvs mode not allowed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ freqs.cpu = 0;
+ freqs.flags = 0;
+ freqs.old = s3c_freq->is_dvs ? FREQ_DVS
+ : clk_get_rate(s3c_freq->armclk) / 1000;
+
+ /* When leavin dvs mode, always switch the armdiv to the hclk rate
+ * The S3C2416 has stability issues when switching directly to
+ * higher frequencies.
+ */
+ freqs.new = (s3c_freq->is_dvs && !to_dvs)
+ ? clk_get_rate(s3c_freq->hclk) / 1000
+ : s3c_freq->freq_table[i].frequency;
+
+ pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+ if (!to_dvs && freqs.old == freqs.new)
+ goto out;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (to_dvs) {
+ pr_debug("cpufreq: enter dvs\n");
+ ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
+ } else if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: leave dvs\n");
+ ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
+ } else {
+ pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
+ ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
+{
+ int count, v, i, found;
+ struct cpufreq_frequency_table *freq;
+ struct s3c2416_dvfs *dvfs;
+
+ count = regulator_count_voltages(s3c_freq->vddarm);
+ if (count < 0) {
+ pr_err("cpufreq: Unable to check supported voltages\n");
+ return;
+ }
+
+ freq = s3c_freq->freq_table;
+ while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
+ if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ dvfs = &s3c2416_dvfs_table[freq->index];
+ found = 0;
+
+ /* Check only the min-voltage, more is always ok on S3C2416 */
+ for (i = 0; i < count; i++) {
+ v = regulator_list_voltage(s3c_freq->vddarm, i);
+ if (v >= dvfs->vddarm_min)
+ found = 1;
+ }
+
+ if (!found) {
+ pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+ freq->frequency);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ freq++;
+ }
+
+ /* Guessed */
+ s3c_freq->regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ int ret;
+
+ mutex_lock(&cpufreq_lock);
+
+ /* disable further changes */
+ s3c_freq->disable_dvs = 1;
+
+ mutex_unlock(&cpufreq_lock);
+
+ /* some boards don't reconfigure the regulator on reboot, which
+ * could lead to undervolting the cpu when the clock is reset.
+ * Therefore we always leave the DVS mode on reboot.
+ */
+ if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: leave dvs on reboot\n");
+ ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
+ if (ret < 0)
+ return NOTIFY_BAD;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
+ .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
+};
+
+static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ struct cpufreq_frequency_table *freq;
+ struct clk *msysclk;
+ unsigned long rate;
+ int ret;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ msysclk = clk_get(NULL, "msysclk");
+ if (IS_ERR(msysclk)) {
+ ret = PTR_ERR(msysclk);
+ pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * S3C2416 and S3C2450 share the same processor-ID and also provide no
+ * other means to distinguish them other than through the rate of
+ * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
+ */
+ rate = clk_get_rate(msysclk);
+ if (rate == 800 * 1000 * 1000) {
+ pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
+ rate / 1000);
+ s3c_freq->freq_table = s3c2416_freq_table;
+ policy->cpuinfo.max_freq = 400000;
+ } else if (rate / 1000 == 534000) {
+ pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
+ rate / 1000);
+ s3c_freq->freq_table = s3c2450_freq_table;
+ policy->cpuinfo.max_freq = 534000;
+ }
+
+ /* not needed anymore */
+ clk_put(msysclk);
+
+ if (s3c_freq->freq_table == NULL) {
+ pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
+ rate / 1000);
+ return -ENODEV;
+ }
+
+ s3c_freq->is_dvs = 0;
+
+ s3c_freq->armdiv = clk_get(NULL, "armdiv");
+ if (IS_ERR(s3c_freq->armdiv)) {
+ ret = PTR_ERR(s3c_freq->armdiv);
+ pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
+ return ret;
+ }
+
+ s3c_freq->hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(s3c_freq->hclk)) {
+ ret = PTR_ERR(s3c_freq->hclk);
+ pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
+ goto err_hclk;
+ }
+
+ /* chech hclk rate, we only support the common 133MHz for now
+ * hclk could also run at 66MHz, but this not often used
+ */
+ rate = clk_get_rate(s3c_freq->hclk);
+ if (rate < 133 * 1000 * 1000) {
+ pr_err("cpufreq: HCLK not at 133MHz\n");
+ clk_put(s3c_freq->hclk);
+ ret = -EINVAL;
+ goto err_armclk;
+ }
+
+ s3c_freq->armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(s3c_freq->armclk)) {
+ ret = PTR_ERR(s3c_freq->armclk);
+ pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
+ goto err_armclk;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ s3c_freq->vddarm = regulator_get(NULL, "vddarm");
+ if (IS_ERR(s3c_freq->vddarm)) {
+ ret = PTR_ERR(s3c_freq->vddarm);
+ pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+ goto err_vddarm;
+ }
+
+ s3c2416_cpufreq_cfg_regulator(s3c_freq);
+#else
+ s3c_freq->regulator_latency = 0;
+#endif
+
+ freq = s3c_freq->freq_table;
+ while (freq->frequency != CPUFREQ_TABLE_END) {
+ /* special handling for dvs mode */
+ if (freq->index == 0) {
+ if (!s3c_freq->hclk) {
+ pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
+ freq->frequency);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ } else {
+ freq++;
+ continue;
+ }
+ }
+
+ /* Check for frequencies we can generate */
+ rate = clk_round_rate(s3c_freq->armdiv,
+ freq->frequency * 1000);
+ rate /= 1000;
+ if (rate != freq->frequency) {
+ pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
+ freq->frequency, rate);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ freq++;
+ }
+
+ policy->cur = clk_get_rate(s3c_freq->armclk) / 1000;
+
+ /* Datasheet says PLL stabalisation time must be at least 300us,
+ * so but add some fudge. (reference in LOCKCON0 register description)
+ */
+ policy->cpuinfo.transition_latency = (500 * 1000) +
+ s3c_freq->regulator_latency;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, s3c_freq->freq_table);
+ if (ret)
+ goto err_freq_table;
+
+ cpufreq_frequency_table_get_attr(s3c_freq->freq_table, 0);
+
+ register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
+
+ return 0;
+
+err_freq_table:
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ regulator_put(s3c_freq->vddarm);
+err_vddarm:
+#endif
+ clk_put(s3c_freq->armclk);
+err_armclk:
+ clk_put(s3c_freq->hclk);
+err_hclk:
+ clk_put(s3c_freq->armdiv);
+
+ return ret;
+}
+
+static struct freq_attr *s3c2416_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver s3c2416_cpufreq_driver = {
+ .owner = THIS_MODULE,
+ .flags = 0,
+ .verify = s3c2416_cpufreq_verify_speed,
+ .target = s3c2416_cpufreq_set_target,
+ .get = s3c2416_cpufreq_get_speed,
+ .init = s3c2416_cpufreq_driver_init,
+ .name = "s3c2416",
+ .attr = s3c2416_cpufreq_attr,
+};
+
+static int __init s3c2416_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&s3c2416_cpufreq_driver);
+}
+module_init(s3c2416_cpufreq_init);
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index a5e72cb5f53..6f9490b3c35 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -217,13 +217,6 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
} else {
s3c64xx_cpufreq_config_regulator();
}
-
- vddint = regulator_get(NULL, "vddint");
- if (IS_ERR(vddint)) {
- ret = PTR_ERR(vddint);
- pr_err("Failed to obtain VDDINT: %d\n", ret);
- vddint = NULL;
- }
#endif
freq = s3c64xx_freq_table;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 07:44:36 +0000