diff options
Diffstat (limited to 'drivers/dma/intel_mid_dma_regs.h')
| -rw-r--r-- | drivers/dma/intel_mid_dma_regs.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h new file mode 100644 index 00000000000..d81aa658ab0 --- /dev/null +++ b/drivers/dma/intel_mid_dma_regs.h @@ -0,0 +1,260 @@ +/* + * intel_mid_dma_regs.h - Intel MID DMA Drivers + * + * Copyright (C) 2008-10 Intel Corp + * Author: Vinod Koul <vinod.koul@intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * + */ +#ifndef __INTEL_MID_DMAC_REGS_H__ +#define __INTEL_MID_DMAC_REGS_H__ + +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/pci_ids.h> + +#define INTEL_MID_DMA_DRIVER_VERSION "1.0.5" + +#define REG_BIT0 0x00000001 +#define REG_BIT8 0x00000100 + +#define UNMASK_INTR_REG(chan_num) \ + ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) +#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num) + +#define ENABLE_CHANNEL(chan_num) \ + ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) + +#define DESCS_PER_CHANNEL 16 +/*DMA Registers*/ +/*registers associated with channel programming*/ +#define DMA_REG_SIZE 0x400 +#define DMA_CH_SIZE 0x58 + +/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/ +#define SAR 0x00 /* Source Address Register*/ +#define DAR 0x08 /* Destination Address Register*/ +#define CTL_LOW 0x18 /* Control Register*/ +#define CTL_HIGH 0x1C /* Control Register*/ +#define CFG_LOW 0x40 /* Configuration Register Low*/ +#define CFG_HIGH 0x44 /* Configuration Register high*/ + +#define STATUS_TFR 0x2E8 +#define STATUS_BLOCK 0x2F0 +#define STATUS_ERR 0x308 + +#define RAW_TFR 0x2C0 +#define RAW_BLOCK 0x2C8 +#define RAW_ERR 0x2E0 + +#define MASK_TFR 0x310 +#define MASK_BLOCK 0x318 +#define MASK_SRC_TRAN 0x320 +#define MASK_DST_TRAN 0x328 +#define MASK_ERR 0x330 + +#define CLEAR_TFR 0x338 +#define CLEAR_BLOCK 0x340 +#define CLEAR_SRC_TRAN 0x348 +#define CLEAR_DST_TRAN 0x350 +#define CLEAR_ERR 0x358 + +#define INTR_STATUS 0x360 +#define DMA_CFG 0x398 +#define DMA_CHAN_EN 0x3A0 + +/*DMA channel control registers*/ +union intel_mid_dma_ctl_lo { + struct { + u32 int_en:1; /*enable or disable interrupts*/ + /*should be 0*/ + u32 dst_tr_width:3; /*destination transfer width*/ + /*usually 32 bits = 010*/ + u32 src_tr_width:3; /*source transfer width*/ + /*usually 32 bits = 010*/ + u32 dinc:2; /*destination address inc/dec*/ + /*For mem:INC=00, Periphral NoINC=11*/ + u32 sinc:2; /*source address inc or dec, as above*/ + u32 dst_msize:3; /*destination burst transaction length*/ + /*always = 16 ie 011*/ + u32 src_msize:3; /*source burst transaction length*/ + /*always = 16 ie 011*/ + u32 reser1:3; + u32 tt_fc:3; /*transfer type and flow controller*/ + /*M-M = 000 + P-M = 010 + M-P = 001*/ + u32 dms:2; /*destination master select = 0*/ + u32 sms:2; /*source master select = 0*/ + u32 llp_dst_en:1; /*enable/disable destination LLP = 0*/ + u32 llp_src_en:1; /*enable/disable source LLP = 0*/ + u32 reser2:3; + } ctlx; + u32 ctl_lo; +}; + +union intel_mid_dma_ctl_hi { + struct { + u32 block_ts:12; /*block transfer size*/ + /*configured by DMAC*/ + u32 reser:20; + } ctlx; + u32 ctl_hi; + +}; + +/*DMA channel configuration registers*/ +union intel_mid_dma_cfg_lo { + struct { + u32 reser1:5; + u32 ch_prior:3; /*channel priority = 0*/ + u32 ch_susp:1; /*channel suspend = 0*/ + u32 fifo_empty:1; /*FIFO empty or not R bit = 0*/ + u32 hs_sel_dst:1; /*select HW/SW destn handshaking*/ + /*HW = 0, SW = 1*/ + u32 hs_sel_src:1; /*select HW/SW src handshaking*/ + u32 reser2:6; + u32 dst_hs_pol:1; /*dest HS interface polarity*/ + u32 src_hs_pol:1; /*src HS interface polarity*/ + u32 max_abrst:10; /*max AMBA burst len = 0 (no sw limit*/ + u32 reload_src:1; /*auto reload src addr =1 if src is P*/ + u32 reload_dst:1; /*AR destn addr =1 if dstn is P*/ + } cfgx; + u32 cfg_lo; +}; + +union intel_mid_dma_cfg_hi { + struct { + u32 fcmode:1; /*flow control mode = 1*/ + u32 fifo_mode:1; /*FIFO mode select = 1*/ + u32 protctl:3; /*protection control = 0*/ + u32 rsvd:2; + u32 src_per:4; /*src hw HS interface*/ + u32 dst_per:4; /*dstn hw HS interface*/ + u32 reser2:17; + } cfgx; + u32 cfg_hi; +}; + +/** + * struct intel_mid_dma_chan - internal mid representation of a DMA channel + * @chan: dma_chan strcture represetation for mid chan + * @ch_regs: MMIO register space pointer to channel register + * @dma_base: MMIO register space DMA engine base pointer + * @ch_id: DMA channel id + * @lock: channel spinlock + * @completed: DMA cookie + * @active_list: current active descriptors + * @queue: current queued up descriptors + * @free_list: current free descriptors + * @slave: dma slave struture + * @descs_allocated: total number of decsiptors allocated + * @dma: dma device struture pointer + * @in_use: bool representing if ch is in use or not + */ +struct intel_mid_dma_chan { + struct dma_chan chan; + void __iomem *ch_regs; + void __iomem *dma_base; + int ch_id; + spinlock_t lock; + dma_cookie_t completed; + struct list_head active_list; + struct list_head queue; + struct list_head free_list; + struct intel_mid_dma_slave *slave; + unsigned int descs_allocated; + struct middma_device *dma; + bool in_use; +}; + +static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan( + struct dma_chan *chan) +{ + return container_of(chan, struct intel_mid_dma_chan, chan); +} + +/** + * struct middma_device - internal representation of a DMA device + * @pdev: PCI device + * @dma_base: MMIO register space pointer of DMA + * @dma_pool: for allocating DMA descriptors + * @common: embedded struct dma_device + * @tasklet: dma tasklet for processing interrupts + * @ch: per channel data + * @pci_id: DMA device PCI ID + * @intr_mask: Interrupt mask to be used + * @mask_reg: MMIO register for periphral mask + * @chan_base: Base ch index (read from driver data) + * @max_chan: max number of chs supported (from drv_data) + * @block_size: Block size of DMA transfer supported (from drv_data) + * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data) + */ +struct middma_device { + struct pci_dev *pdev; + void __iomem *dma_base; + struct pci_pool *dma_pool; + struct dma_device common; + struct tasklet_struct tasklet; + struct intel_mid_dma_chan ch[MAX_CHAN]; + unsigned int pci_id; + unsigned int intr_mask; + void __iomem *mask_reg; + int chan_base; + int max_chan; + int block_size; + unsigned int pimr_mask; +}; + +static inline struct middma_device *to_middma_device(struct dma_device *common) +{ + return container_of(common, struct middma_device, common); +} + +struct intel_mid_dma_desc { + void __iomem *block; /*ch ptr*/ + struct list_head desc_node; + struct dma_async_tx_descriptor txd; + size_t len; + dma_addr_t sar; + dma_addr_t dar; + u32 cfg_hi; + u32 cfg_lo; + u32 ctl_lo; + u32 ctl_hi; + dma_addr_t next; + enum dma_data_direction dirn; + enum dma_status status; + enum intel_mid_dma_width width; /*width of DMA txn*/ + enum intel_mid_dma_mode cfg_mode; /*mode configuration*/ + +}; + +static inline int test_ch_en(void __iomem *dma, u32 ch_no) +{ + u32 en_reg = ioread32(dma + DMA_CHAN_EN); + return (en_reg >> ch_no) & 0x1; +} + +static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc + (struct dma_async_tx_descriptor *txd) +{ + return container_of(txd, struct intel_mid_dma_desc, txd); +} +#endif /*__INTEL_MID_DMAC_REGS_H__*/ |