diff options
Diffstat (limited to 'drivers/dma/ioat/dma_v3.c')
| -rw-r--r-- | drivers/dma/ioat/dma_v3.c | 60 |
1 files changed, 44 insertions, 16 deletions
diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 42f6f10fb0c..9908c9e94b2 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -650,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, num_descs = ioat2_xferlen_to_descs(ioat, len); /* we need 2x the number of descriptors to cover greater than 3 - * sources + * sources (we need 1 extra source in the q-only continuation + * case and 3 extra sources in the p+q continuation case. */ - if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) { + if (src_cnt + dmaf_p_disabled_continue(flags) > 3 || + (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) { with_ext = 1; num_descs *= 2; } else @@ -1128,6 +1130,45 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it + * initialized, with ioat3 specific workarounds + */ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + u32 chanerr; + u16 dev_id; + int err; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + /* -= IOAT ver.3 workarounds =- */ + /* Write CHANERRMSK_INT with 3E07h to mask out the errors + * that can cause stability issues for IOAT ver.3, and clear any + * pending errors + */ + pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) + pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1137,10 +1178,10 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u16 dev_id; u32 cap; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; @@ -1216,19 +1257,6 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_xor_val = NULL; #endif - /* -= IOAT ver.3 workarounds =- */ - /* Write CHANERRMSK_INT with 3E07h to mask out the errors - * that can cause stability issues for IOAT ver.3 - */ - pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); - - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); - err = ioat_probe(device); if (err) return err; |