diff options
Diffstat (limited to 'drivers/dma/ipu/ipu_idmac.c')
| -rw-r--r-- | drivers/dma/ipu/ipu_idmac.c | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index cb26ee9773d..c1a125e7d1d 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1145,29 +1145,6 @@ static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan, reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN); - /* - * Problem (observed with channel DMAIC_7): after enabling the channel - * and initialising buffers, there comes an interrupt with current still - * pointing at buffer 0, whereas it should use buffer 0 first and only - * generate an interrupt when it is done, then current should already - * point to buffer 1. This spurious interrupt also comes on channel - * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the - * first interrupt, there comes the second with current correctly - * pointing to buffer 1 this time. But sometimes this second interrupt - * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling - * the channel seems to prevent the channel from hanging, but it doesn't - * prevent the spurious interrupt. This might also be unsafe. Think - * about the IDMAC controller trying to switch to a buffer, when we - * clear the ready bit, and re-enable it a moment later. - */ - reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY); - idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY); - idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY); - - reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY); - idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY); - idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY); - spin_unlock_irqrestore(&ipu->lock, flags); return 0; @@ -1246,33 +1223,6 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Other interrupts do not interfere with this channel */ spin_lock(&ichan->lock); - if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && - ((curbuf >> chan_id) & 1) == ichan->active_buffer && - !list_is_last(ichan->queue.next, &ichan->queue))) { - int i = 100; - - /* This doesn't help. See comment in ipu_disable_channel() */ - while (--i) { - curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); - if (((curbuf >> chan_id) & 1) != ichan->active_buffer) - break; - cpu_relax(); - } - - if (!i) { - spin_unlock(&ichan->lock); - dev_dbg(dev, - "IRQ on active buffer on channel %x, active " - "%d, ready %x, %x, current %x!\n", chan_id, - ichan->active_buffer, ready0, ready1, curbuf); - return IRQ_NONE; - } else - dev_dbg(dev, - "Buffer deactivated on channel %x, active " - "%d, ready %x, %x, current %x, rest %d!\n", chan_id, - ichan->active_buffer, ready0, ready1, curbuf, i); - } - if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) || (!ichan->active_buffer && (ready0 >> chan_id) & 1) )) { |