diff options
Diffstat (limited to 'drivers/dma')
| -rw-r--r-- | drivers/dma/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/dma/Makefile | 1 | ||||
| -rw-r--r-- | drivers/dma/coh901318.c | 1 | ||||
| -rw-r--r-- | drivers/dma/dmaengine.c | 1 | ||||
| -rw-r--r-- | drivers/dma/dmatest.c | 1 | ||||
| -rw-r--r-- | drivers/dma/ep93xx_dma.c | 1355 | ||||
| -rw-r--r-- | drivers/dma/imx-dma.c | 3 | ||||
| -rw-r--r-- | drivers/dma/ipu/ipu_idmac.c | 1 | ||||
| -rw-r--r-- | drivers/dma/mv_xor.c | 5 | ||||
| -rw-r--r-- | drivers/dma/ste_dma40.c | 1 |
10 files changed, 1372 insertions, 4 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 25cf327cd1c..2e3b3d38c46 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -237,6 +237,13 @@ config MXS_DMA Support the MXS DMA engine. This engine including APBH-DMA and APBX-DMA is integrated into Freescale i.MX23/28 chips. +config EP93XX_DMA + bool "Cirrus Logic EP93xx DMA support" + depends on ARCH_EP93XX + select DMA_ENGINE + help + Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 836095ab3c5..30cf3b1f0c5 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o +obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index af8c0b5ed70..a92d95eac86 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/kernel.h> /* printk() */ #include <linux/fs.h> /* everything... */ +#include <linux/scatterlist.h> #include <linux/slab.h> /* kmalloc() */ #include <linux/dmaengine.h> #include <linux/platform_device.h> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 8bcb15fb959..48694c34d96 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -45,6 +45,7 @@ * See Documentation/dmaengine.txt for more details */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index b4f5c32b6a4..765f5ff2230 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/init.h> #include <linux/kthread.h> diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c new file mode 100644 index 00000000000..0766c1e53b1 --- /dev/null +++ b/drivers/dma/ep93xx_dma.c @@ -0,0 +1,1355 @@ +/* + * Driver for the Cirrus Logic EP93xx DMA Controller + * + * Copyright (C) 2011 Mika Westerberg + * + * DMA M2P implementation is based on the original + * arch/arm/mach-ep93xx/dma-m2p.c which has following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> + * + * This driver is based on dw_dmac and amba-pl08x drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <mach/dma.h> + +/* M2P registers */ +#define M2P_CONTROL 0x0000 +#define M2P_CONTROL_STALLINT BIT(0) +#define M2P_CONTROL_NFBINT BIT(1) +#define M2P_CONTROL_CH_ERROR_INT BIT(3) +#define M2P_CONTROL_ENABLE BIT(4) +#define M2P_CONTROL_ICE BIT(6) + +#define M2P_INTERRUPT 0x0004 +#define M2P_INTERRUPT_STALL BIT(0) +#define M2P_INTERRUPT_NFB BIT(1) +#define M2P_INTERRUPT_ERROR BIT(3) + +#define M2P_PPALLOC 0x0008 +#define M2P_STATUS 0x000c + +#define M2P_MAXCNT0 0x0020 +#define M2P_BASE0 0x0024 +#define M2P_MAXCNT1 0x0030 +#define M2P_BASE1 0x0034 + +#define M2P_STATE_IDLE 0 +#define M2P_STATE_STALL 1 +#define M2P_STATE_ON 2 +#define M2P_STATE_NEXT 3 + +/* M2M registers */ +#define M2M_CONTROL 0x0000 +#define M2M_CONTROL_DONEINT BIT(2) +#define M2M_CONTROL_ENABLE BIT(3) +#define M2M_CONTROL_START BIT(4) +#define M2M_CONTROL_DAH BIT(11) +#define M2M_CONTROL_SAH BIT(12) +#define M2M_CONTROL_PW_SHIFT 9 +#define M2M_CONTROL_PW_8 (0 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_16 (1 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_32 (2 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_MASK (3 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_TM_SHIFT 13 +#define M2M_CONTROL_TM_TX (1 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_TM_RX (2 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_RSS_SHIFT 22 +#define M2M_CONTROL_RSS_SSPRX (1 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_SSPTX (2 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_IDE (3 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_NO_HDSK BIT(24) +#define M2M_CONTROL_PWSC_SHIFT 25 + +#define M2M_INTERRUPT 0x0004 +#define M2M_INTERRUPT_DONEINT BIT(1) + +#define M2M_BCR0 0x0010 +#define M2M_BCR1 0x0014 +#define M2M_SAR_BASE0 0x0018 +#define M2M_SAR_BASE1 0x001c +#define M2M_DAR_BASE0 0x002c +#define M2M_DAR_BASE1 0x0030 + +#define DMA_MAX_CHAN_BYTES 0xffff +#define DMA_MAX_CHAN_DESCRIPTORS 32 + +struct ep93xx_dma_engine; + +/** + * struct ep93xx_dma_desc - EP93xx specific transaction descriptor + * @src_addr: source address of the transaction + * @dst_addr: destination address of the transaction + * @size: size of the transaction (in bytes) + * @complete: this descriptor is completed + * @txd: dmaengine API descriptor + * @tx_list: list of linked descriptors + * @node: link used for putting this into a channel queue + */ +struct ep93xx_dma_desc { + u32 src_addr; + u32 dst_addr; + size_t size; + bool complete; + struct dma_async_tx_descriptor txd; + struct list_head tx_list; + struct list_head node; +}; + +/** + * struct ep93xx_dma_chan - an EP93xx DMA M2P/M2M channel + * @chan: dmaengine API channel + * @edma: pointer to to the engine device + * @regs: memory mapped registers + * @irq: interrupt number of the channel + * @clk: clock used by this channel + * @tasklet: channel specific tasklet used for callbacks + * @lock: lock protecting the fields following + * @flags: flags for the channel + * @buffer: which buffer to use next (0/1) + * @last_completed: last completed cookie value + * @active: flattened chain of descriptors currently being processed + * @queue: pending descriptors which are handled next + * @free_list: list of free descriptors which can be used + * @runtime_addr: physical address currently used as dest/src (M2M only). This + * is set via %DMA_SLAVE_CONFIG before slave operation is + * prepared + * @runtime_ctrl: M2M runtime values for the control register. + * + * As EP93xx DMA controller doesn't support real chained DMA descriptors we + * will have slightly different scheme here: @active points to a head of + * flattened DMA descriptor chain. + * + * @queue holds pending transactions. These are linked through the first + * descriptor in the chain. When a descriptor is moved to the @active queue, + * the first and chained descriptors are flattened into a single list. + * + * @chan.private holds pointer to &struct ep93xx_dma_data which contains + * necessary channel configuration information. For memcpy channels this must + * be %NULL. + */ +struct ep93xx_dma_chan { + struct dma_chan chan; + const struct ep93xx_dma_engine *edma; + void __iomem *regs; + int irq; + struct clk *clk; + struct tasklet_struct tasklet; + /* protects the fields following */ + spinlock_t lock; + unsigned long flags; +/* Channel is configured for cyclic transfers */ +#define EP93XX_DMA_IS_CYCLIC 0 + + int buffer; + dma_cookie_t last_completed; + struct list_head active; + struct list_head queue; + struct list_head free_list; + u32 runtime_addr; + u32 runtime_ctrl; +}; + +/** + * struct ep93xx_dma_engine - the EP93xx DMA engine instance + * @dma_dev: holds the dmaengine device + * @m2m: is this an M2M or M2P device + * @hw_setup: method which sets the channel up for operation + * @hw_shutdown: shuts the channel down and flushes whatever is left + * @hw_submit: pushes active descriptor(s) to the hardware + * @hw_interrupt: handle the interrupt + * @num_channels: number of channels for this instance + * @channels: array of channels + * + * There is one instance of this struct for the M2P channels and one for the + * M2M channels. hw_xxx() methods are used to perform operations which are + * different on M2M and M2P channels. These methods are called with channel + * lock held and interrupts disabled so they cannot sleep. + */ +struct ep93xx_dma_engine { + struct dma_device dma_dev; + bool m2m; + int (*hw_setup)(struct ep93xx_dma_chan *); + void (*hw_shutdown)(struct ep93xx_dma_chan *); + void (*hw_submit)(struct ep93xx_dma_chan *); + int (*hw_interrupt)(struct ep93xx_dma_chan *); +#define INTERRUPT_UNKNOWN 0 +#define INTERRUPT_DONE 1 +#define INTERRUPT_NEXT_BUFFER 2 + + size_t num_channels; + struct ep93xx_dma_chan channels[]; +}; + +static inline struct device *chan2dev(struct ep93xx_dma_chan *edmac) +{ + return &edmac->chan.dev->device; +} + +static struct ep93xx_dma_chan *to_ep93xx_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct ep93xx_dma_chan, chan); +} + +/** + * ep93xx_dma_set_active - set new active descriptor chain + * @edmac: channel + * @desc: head of the new active descriptor chain + * + * Sets @desc to be the head of the new active descriptor chain. This is the + * chain which is processed next. The active list must be empty before calling + * this function. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static void ep93xx_dma_set_active(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + BUG_ON(!list_empty(&edmac->active)); + + list_add_tail(&desc->node, &edmac->active); + + /* Flatten the @desc->tx_list chain into @edmac->active list */ + while (!list_empty(&desc->tx_list)) { + struct ep93xx_dma_desc *d = list_first_entry(&desc->tx_list, + struct ep93xx_dma_desc, node); + + /* + * We copy the callback parameters from the first descriptor + * to all the chained descriptors. This way we can call the + * callback without having to find out the first descriptor in + * the chain. Useful for cyclic transfers. + */ + d->txd.callback = desc->txd.callback; + d->txd.callback_param = desc->txd.callback_param; + + list_move_tail(&d->node, &edmac->active); + } +} + +/* Called with @edmac->lock held and interrupts disabled */ +static struct ep93xx_dma_desc * +ep93xx_dma_get_active(struct ep93xx_dma_chan *edmac) +{ + return list_first_entry(&edmac->active, struct ep93xx_dma_desc, node); +} + +/** + * ep93xx_dma_advance_active - advances to the next active descriptor + * @edmac: channel + * + * Function advances active descriptor to the next in the @edmac->active and + * returns %true if we still have descriptors in the chain to process. + * Otherwise returns %false. + * + * When the channel is in cyclic mode always returns %true. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static bool ep93xx_dma_advance_active(struct ep93xx_dma_chan *edmac) +{ + list_rotate_left(&edmac->active); + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + return true; + + /* + * If txd.cookie is set it means that we are back in the first + * descriptor in the chain and hence done with it. + */ + return !ep93xx_dma_get_active(edmac)->txd.cookie; +} + +/* + * M2P DMA implementation + */ + +static void m2p_set_control(struct ep93xx_dma_chan *edmac, u32 control) +{ + writel(control, edmac->regs + M2P_CONTROL); + /* + * EP93xx User's Guide states that we must perform a dummy read after + * write to the control register. + */ + readl(edmac->regs + M2P_CONTROL); +} + +static int m2p_hw_setup(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control; + + writel(data->port & 0xf, edmac->regs + M2P_PPALLOC); + + control = M2P_CONTROL_CH_ERROR_INT | M2P_CONTROL_ICE + | M2P_CONTROL_ENABLE; + m2p_set_control(edmac, control); + + return 0; +} + +static inline u32 m2p_channel_state(struct ep93xx_dma_chan *edmac) +{ + return (readl(edmac->regs + M2P_STATUS) >> 4) & 0x3; +} + +static void m2p_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + while (m2p_channel_state(edmac) >= M2P_STATE_ON) + cpu_relax(); + + m2p_set_control(edmac, 0); + + while (m2p_channel_state(edmac) == M2P_STATE_STALL) + cpu_relax(); +} + +static void m2p_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + u32 bus_addr; + + if (ep93xx_dma_chan_direction(&edmac->chan) == DMA_TO_DEVICE) + bus_addr = desc->src_addr; + else + bus_addr = desc->dst_addr; + + if (edmac->buffer == 0) { + writel(desc->size, edmac->regs + M2P_MAXCNT0); + writel(bus_addr, edmac->regs + M2P_BASE0); + } else { + writel(desc->size, edmac->regs + M2P_MAXCNT1); + writel(bus_addr, edmac->regs + M2P_BASE1); + } + + edmac->buffer ^= 1; +} + +static void m2p_hw_submit(struct ep93xx_dma_chan *edmac) +{ + u32 control = readl(edmac->regs + M2P_CONTROL); + + m2p_fill_desc(edmac); + control |= M2P_CONTROL_STALLINT; + + if (ep93xx_dma_advance_active(edmac)) { + m2p_fill_desc(edmac); + control |= M2P_CONTROL_NFBINT; + } + + m2p_set_control(edmac, control); +} + +static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 irq_status = readl(edmac->regs + M2P_INTERRUPT); + u32 control; + + if (irq_status & M2P_INTERRUPT_ERROR) { + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + /* Clear the error interrupt */ + writel(1, edmac->regs + M2P_INTERRUPT); + + /* + * It seems that there is no easy way of reporting errors back + * to client so we just report the error here and continue as + * usual. + * + * Revisit this when there is a mechanism to report back the + * errors. + */ + dev_err(chan2dev(edmac), + "DMA transfer failed! Details:\n" + "\tcookie : %d\n" + "\tsrc_addr : 0x%08x\n" + "\tdst_addr : 0x%08x\n" + "\tsize : %zu\n", + desc->txd.cookie, desc->src_addr, desc->dst_addr, + desc->size); + } + + switch (irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) { + case M2P_INTERRUPT_STALL: + /* Disable interrupts */ + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + return INTERRUPT_DONE; + + case M2P_INTERRUPT_NFB: + if (ep93xx_dma_advance_active(edmac)) + m2p_fill_desc(edmac); + + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_UNKNOWN; +} + +/* + * M2M DMA implementation + * + * For the M2M transfers we don't use NFB at all. This is because it simply + * doesn't work well with memcpy transfers. When you submit both buffers it is + * extremely unlikely that you get an NFB interrupt, but it instead reports + * DONE interrupt and both buffers are already transferred which means that we + * weren't able to update the next buffer. + * + * So for now we "simulate" NFB by just submitting buffer after buffer + * without double buffering. + */ + +static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) +{ + const struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = 0; + + if (!data) { + /* This is memcpy channel, nothing to configure */ + writel(control, edmac->regs + M2M_CONTROL); + return 0; + } + + switch (data->port) { + case EP93XX_DMA_SSP: + /* + * This was found via experimenting - anything less than 5 + * causes the channel to perform only a partial transfer which + * leads to problems since we don't get DONE interrupt then. + */ + control = (5 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_NO_HDSK; + + if (data->direction == DMA_TO_DEVICE) { + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + control |= M2M_CONTROL_RSS_SSPTX; + } else { + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + control |= M2M_CONTROL_RSS_SSPRX; + } + break; + + case EP93XX_DMA_IDE: + /* + * This IDE part is totally untested. Values below are taken + * from the EP93xx Users's Guide and might not be correct. + */ + control |= M2M_CONTROL_NO_HDSK; + control |= M2M_CONTROL_RSS_IDE; + control |= M2M_CONTROL_PW_16; + + if (data->direction == DMA_TO_DEVICE) { + /* Worst case from the UG */ + control = (3 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + } else { + control = (2 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + } + break; + + default: + return -EINVAL; + } + + writel(control, edmac->regs + M2M_CONTROL); + return 0; +} + +static void m2m_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + /* Just disable the channel */ + writel(0, edmac->regs + M2M_CONTROL); +} + +static void m2m_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + if (edmac->buffer == 0) { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE0); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE0); + writel(desc->size, edmac->regs + M2M_BCR0); + } else { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE1); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE1); + writel(desc->size, edmac->regs + M2M_BCR1); + } + + edmac->buffer ^= 1; +} + +static void m2m_hw_submit(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = readl(edmac->regs + M2M_CONTROL); + + /* + * Since we allow clients to configure PW (peripheral width) we always + * clear PW bits here and then set them according what is given in + * the runtime configuration. + */ + control &= ~M2M_CONTROL_PW_MASK; + control |= edmac->runtime_ctrl; + + m2m_fill_desc(edmac); + control |= M2M_CONTROL_DONEINT; + + /* + * Now we can finally enable the channel. For M2M channel this must be + * done _after_ the BCRx registers are programmed. + */ + control |= M2M_CONTROL_ENABLE; + writel(control, edmac->regs + M2M_CONTROL); + + if (!data) { + /* + * For memcpy channels the software trigger must be asserted + * in order to start the memcpy operation. + */ + control |= M2M_CONTROL_START; + writel(control, edmac->regs + M2M_CONTROL); + } +} + +static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_DONEINT)) + return INTERRUPT_UNKNOWN; + + /* Clear the DONE bit */ + writel(0, edmac->regs + M2M_INTERRUPT); + + /* Disable interrupts and the channel */ + control = readl(edmac->regs + M2M_CONTROL); + control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_ENABLE); + writel(control, edmac->regs + M2M_CONTROL); + + /* + * Since we only get DONE interrupt we have to find out ourselves + * whether there still is something to process. So we try to advance + * the chain an see whether it succeeds. + */ + if (ep93xx_dma_advance_active(edmac)) { + edmac->edma->hw_submit(edmac); + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_DONE; +} + +/* + * DMA engine API implementation + */ + +static struct ep93xx_dma_desc * +ep93xx_dma_desc_get(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_desc; + struct ep93xx_dma_desc *ret = NULL; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_for_each_entry_safe(desc, _desc, &edmac->free_list, node) { + if (async_tx_test_ack(&desc->txd)) { + list_del_init(&desc->node); + + /* Re-initialize the descriptor */ + desc->src_addr = 0; + desc->dst_addr = 0; + desc->size = 0; + desc->complete = false; + desc->txd.cookie = 0; + desc->txd.callback = NULL; + desc->txd.callback_param = NULL; + + ret = desc; + break; + } + } + spin_unlock_irqrestore(&edmac->lock, flags); + return ret; +} + +static void ep93xx_dma_desc_put(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + if (desc) { + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_splice_init(&desc->tx_list, &edmac->free_list); + list_add(&desc->node, &edmac->free_list); + spin_unlock_irqrestore(&edmac->lock, flags); + } +} + +/** + * ep93xx_dma_advance_work - start processing the next pending transaction + * @edmac: channel + * + * If we have pending transactions queued and we are currently idling, this + * function takes the next queued transaction from the @edmac->queue and + * pushes it to the hardware for execution. + */ +static void ep93xx_dma_advance_work(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *new; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + if (!list_empty(&edmac->active) || list_empty(&edmac->queue)) { + spin_unlock_irqrestore(&edmac->lock, flags); + return; + } + + /* Take the next descriptor from the pending queue */ + new = list_first_entry(&edmac->queue, struct ep93xx_dma_desc, node); + list_del_init(&new->node); + + ep93xx_dma_set_active(edmac, new); + + /* Push it to the hardware */ + edmac->edma->hw_submit(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); +} + +static void ep93xx_dma_unmap_buffers(struct ep93xx_dma_desc *desc) +{ + struct device *dev = desc->txd.chan->device->dev; + + if (!(desc->txd.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + else + dma_unmap_page(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + } + if (!(desc->txd.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + else + dma_unmap_page(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + } +} + +static void ep93xx_dma_tasklet(unsigned long data) +{ + struct ep93xx_dma_chan *edmac = (struct ep93xx_dma_chan *)data; + struct ep93xx_dma_desc *desc, *d; + dma_async_tx_callback callback; + void *callback_param; + LIST_HEAD(list); + + spin_lock_irq(&edmac->lock); + desc = ep93xx_dma_get_active(edmac); + if (desc->complete) { + edmac->last_completed = desc->txd.cookie; + list_splice_init(&edmac->active, &list); + } + spin_unlock_irq(&edmac->lock); + + /* Pick up the next descriptor from the queue */ + ep93xx_dma_advance_work(edmac); + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + /* Now we can release all the chained descriptors */ + list_for_each_entry_safe(desc, d, &list, node) { + /* + * For the memcpy channels the API requires us to unmap the + * buffers unless requested otherwise. + */ + if (!edmac->chan.private) + ep93xx_dma_unmap_buffers(desc); + + ep93xx_dma_desc_put(edmac, desc); + } + + if (callback) + callback(callback_param); +} + +static irqreturn_t ep93xx_dma_interrupt(int irq, void *dev_id) +{ + struct ep93xx_dma_chan *edmac = dev_id; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&edmac->lock); + + switch (edmac->edma->hw_interrupt(edmac)) { + case INTERRUPT_DONE: + ep93xx_dma_get_active(edmac)->complete = true; + tasklet_schedule(&edmac->tasklet); + break; + + case INTERRUPT_NEXT_BUFFER: + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + tasklet_schedule(&edmac->tasklet); + break; + + default: + dev_warn(chan2dev(edmac), "unknown interrupt!\n"); + ret = IRQ_NONE; + break; + } + + spin_unlock(&edmac->lock); + return ret; +} + +/** + * ep93xx_dma_tx_submit - set the prepared descriptor(s) to be executed + * @tx: descriptor to be executed + * + * Function will execute given descriptor on the hardware or if the hardware + * is busy, queue the descriptor to be executed later on. Returns cookie which + * can be used to poll the status of the descriptor. + */ +static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(tx->chan); + struct ep93xx_dma_desc *desc; + dma_cookie_t cookie; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + + cookie = edmac->chan.cookie; + + if (++cookie < 0) + cookie = 1; + + desc = container_of(tx, struct ep93xx_dma_desc, txd); + + edmac->chan.cookie = cookie; + desc->txd.cookie = cookie; + + /* + * If nothing is currently prosessed, we push this descriptor + * directly to the hardware. Otherwise we put the descriptor + * to the pending queue. + */ + if (list_empty(&edmac->active)) { + ep93xx_dma_set_active(edmac, desc); + edmac->edma->hw_submit(edmac); + } else { + list_add_tail(&desc->node, &edmac->queue); + } + + spin_unlock_irqrestore(&edmac->lock, flags); + return cookie; +} + +/** + * ep93xx_dma_alloc_chan_resources - allocate resources for the channel + * @chan: channel to allocate resources + * + * Function allocates necessary resources for the given DMA channel and + * returns number of allocated descriptors for the channel. Negative errno + * is returned in case of failure. + */ +static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_data *data = chan->private; + const char *name = dma_chan_name(chan); + int ret, i; + + /* Sanity check the channel parameters */ + if (!edmac->edma->m2m) { + if (!data) + return -EINVAL; + if (data->port < EP93XX_DMA_I2S1 || + data->port > EP93XX_DMA_IRDA) + return -EINVAL; + if (data->direction != ep93xx_dma_chan_direction(chan)) + return -EINVAL; + } else { + if (data) { + switch (data->port) { + case EP93XX_DMA_SSP: + case EP93XX_DMA_IDE: + if (data->direction != DMA_TO_DEVICE && + data->direction != DMA_FROM_DEVICE) + return -EINVAL; + break; + default: + return -EINVAL; + } + } + } + + if (data && data->name) + name = data->name; + + ret = clk_enable(edmac->clk); + if (ret) + return ret; + + ret = request_irq(edmac->irq, ep93xx_dma_interrupt, 0, name, edmac); + if (ret) + goto fail_clk_disable; + + spin_lock_irq(&edmac->lock); + edmac->last_completed = 1; + edmac->chan.cookie = 1; + ret = edmac->edma->hw_setup(edmac); + spin_unlock_irq(&edmac->lock); + + if (ret) + goto fail_free_irq; + + for (i = 0; i < DMA_MAX_CHAN_DESCRIPTORS; i++) { + struct ep93xx_dma_desc *desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) { + dev_warn(chan2dev(edmac), "not enough descriptors\n"); + break; + } + + INIT_LIST_HEAD(&desc->tx_list); + + dma_async_tx_descriptor_init(&desc->txd, chan); + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.tx_submit = ep93xx_dma_tx_submit; + + ep93xx_dma_desc_put(edmac, desc); + } + + return i; + +fail_free_irq: + free_irq(edmac->irq, edmac); +fail_clk_disable: + clk_disable(edmac->clk); + + return ret; +} + +/** + * ep93xx_dma_free_chan_resources - release resources for the channel + * @chan: channel + * + * Function releases all the resources allocated for the given channel. + * The channel must be idle when this is called. + */ +static void ep93xx_dma_free_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *d; + unsigned long flags; + LIST_HEAD(list); + + BUG_ON(!list_empty(&edmac->active)); + BUG_ON(!list_empty(&edmac->queue)); + + spin_lock_irqsave(&edmac->lock, flags); + edmac->edma->hw_shutdown(edmac); + edmac->runtime_addr = 0; + edmac->runtime_ctrl = 0; + edmac->buffer = 0; + list_splice_init(&edmac->free_list, &list); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, d, &list, node) + kfree(desc); + + clk_disable(edmac->clk); + free_irq(edmac->irq, edmac); +} + +/** + * ep93xx_dma_prep_dma_memcpy - prepare a memcpy DMA operation + * @chan: channel + * @dest: destination bus address + * @src: source bus address + * @len: size of the transaction + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t bytes, offset; + + first = NULL; + for (offset = 0; offset < len; offset += bytes) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + bytes = min_t(size_t, len - offset, DMA_MAX_CHAN_BYTES); + + desc->src_addr = src + offset; + desc->dst_addr = dest + offset; + desc->size = bytes; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_slave_sg - prepare a slave DMA operation + * @chan: channel + * @sgl: list of buffers to transfer + * @sg_len: number of entries in @sgl + * @dir: direction of tha DMA transfer + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction dir, + unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + struct scatterlist *sg; + int i; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + first = NULL; + for_each_sg(sgl, sg, sg_len, i) { + size_t sg_len = sg_dma_len(sg); + + if (sg_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big transfer size %d\n", + sg_len); + goto fail; + } + + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = sg_dma_address(sg); + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = sg_dma_address(sg); + } + desc->size = sg_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_dma_cyclic - prepare a cyclic DMA operation + * @chan: channel + * @dma_addr: DMA mapped address of the buffer + * @buf_len: length of the buffer (in bytes) + * @period_len: lenght of a single period + * @dir: direction of the operation + * + * Prepares a descriptor for cyclic DMA operation. This means that once the + * descriptor is submitted, we will be submitting in a @period_len sized + * buffers and calling callback once the period has been elapsed. Transfer + * terminates only when client calls dmaengine_terminate_all() for this + * channel. + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, + size_t buf_len, size_t period_len, + enum dma_data_direction dir) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t offset = 0; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_and_set_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + if (period_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big period length %d\n", + period_len); + return NULL; + } + + /* Split the buffer into period size chunks */ + first = NULL; + for (offset = 0; offset < buf_len; offset += period_len) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = dma_addr + offset; + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = dma_addr + offset; + } + + desc->size = period_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_terminate_all - terminate all transactions + * @edmac: channel + * + * Stops all DMA transactions. All descriptors are put back to the + * @edmac->free_list and callbacks are _not_ called. + */ +static int ep93xx_dma_terminate_all(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_d; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&edmac->lock, flags); + /* First we disable and flush the DMA channel */ + edmac->edma->hw_shutdown(edmac); + clear_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags); + list_splice_init(&edmac->active, &list); + list_splice_init(&edmac->queue, &list); + /* + * We then re-enable the channel. This way we can continue submitting + * the descriptors by just calling ->hw_submit() again. + */ + edmac->edma->hw_setup(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, _d, &list, node) + ep93xx_dma_desc_put(edmac, desc); + + return 0; +} + +static int ep93xx_dma_slave_config(struct ep93xx_dma_chan *edmac, + struct dma_slave_config *config) +{ + enum dma_slave_buswidth width; + unsigned long flags; + u32 addr, ctrl; + + if (!edmac->edma->m2m) + return -EINVAL; + + switch (config->direction) { + case DMA_FROM_DEVICE: + width = config->src_addr_width; + addr = config->src_addr; + break; + + case DMA_TO_DEVICE: + width = config->dst_addr_width; + addr = config->dst_addr; + break; + + default: + return -EINVAL; + } + + switch (width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + ctrl = 0; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + ctrl = M2M_CONTROL_PW_16; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + ctrl = M2M_CONTROL_PW_32; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&edmac->lock, flags); + edmac->runtime_addr = addr; + edmac->runtime_ctrl = ctrl; + spin_unlock_irqrestore(&edmac->lock, flags); + + return 0; +} + +/** + * ep93xx_dma_control - manipulate all pending operations on a channel + * @chan: channel + * @cmd: control command to perform + * @arg: optional argument + * + * Controls the channel. Function returns %0 in case of success or negative + * error in case of failure. + */ +static int ep93xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct dma_slave_config *config; + + switch (cmd) { + case DMA_TERMINATE_ALL: + return ep93xx_dma_terminate_all(edmac); + + case DMA_SLAVE_CONFIG: + config = (struct dma_slave_config *)arg; + return ep93xx_dma_slave_config(edmac, config); + + default: + break; + } + + return -ENOSYS; +} + +/** + * ep93xx_dma_tx_status - check if a transaction is completed + * @chan: channel + * @cookie: transaction specific cookie + * @state: state of the transaction is stored here if given + * + * This function can be used to query state of a given transaction. + */ +static enum dma_status ep93xx_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *state) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + dma_cookie_t last_used, last_completed; + enum dma_status ret; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + last_used = chan->cookie; + last_completed = edmac->last_completed; + spin_unlock_irqrestore(&edmac->lock, flags); + + ret = dma_async_is_complete(cookie, last_completed, last_used); + dma_set_tx_state(state, last_completed, last_used, 0); + + return ret; +} + +/** + * ep93xx_dma_issue_pending - push pending transactions to the hardware + * @chan: channel + * + * When this function is called, all pending transactions are pushed to the + * hardware and executed. + */ +static void ep93xx_dma_issue_pending(struct dma_chan *chan) +{ + ep93xx_dma_advance_work(to_ep93xx_dma_chan(chan)); +} + +static int __init ep93xx_dma_probe(struct platform_device *pdev) +{ + struct ep93xx_dma_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct ep93xx_dma_engine *edma; + struct dma_device *dma_dev; + size_t edma_size; + int ret, i; + + edma_size = pdata->num_channels * sizeof(struct ep93xx_dma_chan); + edma = kzalloc(sizeof(*edma) + edma_size, GFP_KERNEL); + if (!edma) + return -ENOMEM; + + dma_dev = &edma->dma_dev; + edma->m2m = platform_get_device_id(pdev)->driver_data; + edma->num_channels = pdata->num_channels; + + INIT_LIST_HEAD(&dma_dev->channels); + for (i = 0; i < pdata->num_channels; i++) { + const struct ep93xx_dma_chan_data *cdata = &pdata->channels[i]; + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + + edmac->chan.device = dma_dev; + edmac->regs = cdata->base; + edmac->irq = cdata->irq; + edmac->edma = edma; + + edmac->clk = clk_get(NULL, cdata->name); + if (IS_ERR(edmac->clk)) { + dev_warn(&pdev->dev, "failed to get clock for %s\n", + cdata->name); + continue; + } + + spin_lock_init(&edmac->lock); + INIT_LIST_HEAD(&edmac->active); + INIT_LIST_HEAD(&edmac->queue); + INIT_LIST_HEAD(&edmac->free_list); + tasklet_init(&edmac->tasklet, ep93xx_dma_tasklet, + (unsigned long)edmac); + + list_add_tail(&edmac->chan.device_node, + &dma_dev->channels); + } + + dma_cap_zero(dma_dev->cap_mask); + dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); + dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask); + + dma_dev->dev = &pdev->dev; + dma_dev->device_alloc_chan_resources = ep93xx_dma_alloc_chan_resources; + dma_dev->device_free_chan_resources = ep93xx_dma_free_chan_resources; + dma_dev->device_prep_slave_sg = ep93xx_dma_prep_slave_sg; + dma_dev->device_prep_dma_cyclic = ep93xx_dma_prep_dma_cyclic; + dma_dev->device_control = ep93xx_dma_control; + dma_dev->device_issue_pending = ep93xx_dma_issue_pending; + dma_dev->device_tx_status = ep93xx_dma_tx_status; + + dma_set_max_seg_size(dma_dev->dev, DMA_MAX_CHAN_BYTES); + + if (edma->m2m) { + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); + dma_dev->device_prep_dma_memcpy = ep93xx_dma_prep_dma_memcpy; + + edma->hw_setup = m2m_hw_setup; + edma->hw_shutdown = m2m_hw_shutdown; + edma->hw_submit = m2m_hw_submit; + edma->hw_interrupt = m2m_hw_interrupt; + } else { + dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); + + edma->hw_setup = m2p_hw_setup; + edma->hw_shutdown = m2p_hw_shutdown; + edma->hw_submit = m2p_hw_submit; + edma->hw_interrupt = m2p_hw_interrupt; + } + + ret = dma_async_device_register(dma_dev); + if (unlikely(ret)) { + for (i = 0; i < edma->num_channels; i++) { + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + if (!IS_ERR_OR_NULL(edmac->clk)) + clk_put(edmac->clk); + } + kfree(edma); + } else { + dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", + edma->m2m ? "M" : "P"); + } + + return ret; +} + +static struct platform_device_id ep93xx_dma_driver_ids[] = { + { "ep93xx-dma-m2p", 0 }, + { "ep93xx-dma-m2m", 1 }, + { }, +}; + +static struct platform_driver ep93xx_dma_driver = { + .driver = { + .name = "ep93xx-dma", + }, + .id_table = ep93xx_dma_driver_ids, +}; + +static int __init ep93xx_dma_module_init(void) +{ + return platform_driver_probe(&ep93xx_dma_driver, ep93xx_dma_probe); +} +subsys_initcall(ep93xx_dma_module_init); + +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>"); +MODULE_DESCRIPTION("EP93xx DMA driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index e18eaabe92b..d99f71c356b 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, if (ret) return ret; - imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level); + imx_dma_config_burstlen(imxdmac->imxdma_channel, + imxdmac->watermark_level * imxdmac->word_size); return 0; default: diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index c1a125e7d1d..fd7d2b308cf 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -9,6 +9,7 @@ * published by the Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/err.h> diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 954e334e01b..06f9f27dbe7 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1304,8 +1304,7 @@ static int mv_xor_shared_probe(struct platform_device *pdev) if (!res) return -ENODEV; - msp->xor_base = devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); + msp->xor_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!msp->xor_base) return -EBUSY; @@ -1314,7 +1313,7 @@ static int mv_xor_shared_probe(struct platform_device *pdev) return -ENODEV; msp->xor_high_base = devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); + resource_size(res)); if (!msp->xor_high_base) return -EBUSY; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 8f222d4db7d..29d1addbe0c 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -6,6 +6,7 @@ * License terms: GNU General Public License (GPL) version 2 */ +#include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/dmaengine.h> |