diff options
Diffstat (limited to 'drivers/edac/r82600_edac.c')
| -rw-r--r-- | drivers/edac/r82600_edac.c | 32 |
1 files changed, 15 insertions, 17 deletions
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c index 445c9ff27b8..872c3b92803 100644 --- a/drivers/edac/r82600_edac.c +++ b/drivers/edac/r82600_edac.c @@ -205,7 +205,7 @@ static void r82600_check(struct mem_ctl_info *mci) { struct r82600_error_info info; - debugf1("MC%d: %s()\n", mci->mc_idx, __func__); + debugf1("MC%d\n", mci->mc_idx); r82600_get_error_info(mci, &info); r82600_process_error_info(mci, &info, 1); } @@ -236,13 +236,13 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, /* find the DRAM Chip Select Base address and mask */ pci_read_config_byte(pdev, R82600_DRBA + index, &drbar); - debugf1("%s() Row=%d DRBA = %#0x\n", __func__, index, drbar); + debugf1("Row=%d DRBA = %#0x\n", index, drbar); row_high_limit = ((u32) drbar << 24); /* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */ - debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n", - __func__, index, row_high_limit, row_high_limit_last); + debugf1("Row=%d, Boundary Address=%#0x, Last = %#0x\n", + index, row_high_limit, row_high_limit_last); /* Empty row [p.57] */ if (row_high_limit == row_high_limit_last) @@ -277,14 +277,13 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx) u32 sdram_refresh_rate; struct r82600_error_info discard; - debugf0("%s()\n", __func__); + debugf0("\n"); pci_read_config_byte(pdev, R82600_DRAMC, &dramcr); pci_read_config_dword(pdev, R82600_EAP, &eapr); scrub_disabled = eapr & BIT(31); sdram_refresh_rate = dramcr & (BIT(0) | BIT(1)); - debugf2("%s(): sdram refresh rate = %#0x\n", __func__, - sdram_refresh_rate); - debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr); + debugf2("sdram refresh rate = %#0x\n", sdram_refresh_rate); + debugf2("DRAMC register = %#0x\n", dramcr); layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; layers[0].size = R82600_NR_CSROWS; layers[0].is_virt_csrow = true; @@ -295,7 +294,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; - debugf0("%s(): mci = %p\n", __func__, mci); + debugf0("mci = %p\n", mci); mci->pdev = &pdev->dev; mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; @@ -311,8 +310,8 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx) if (ecc_enabled(dramcr)) { if (scrub_disabled) - debugf3("%s(): mci = %p - Scrubbing disabled! EAP: " - "%#0x\n", __func__, mci, eapr); + debugf3("mci = %p - Scrubbing disabled! EAP: " + "%#0x\n", mci, eapr); } else mci->edac_cap = EDAC_FLAG_NONE; @@ -329,15 +328,14 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx) * type of memory controller. The ID is therefore hardcoded to 0. */ if (edac_mc_add_mc(mci)) { - debugf3("%s(): failed edac_mc_add_mc()\n", __func__); + debugf3("failed edac_mc_add_mc()\n"); goto fail; } /* get this far and it's successful */ if (disable_hardware_scrub) { - debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n", - __func__); + debugf3("Disabling Hardware Scrub (scrub on error)\n"); pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31)); } @@ -352,7 +350,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx) __func__); } - debugf3("%s(): success\n", __func__); + debugf3("success\n"); return 0; fail: @@ -364,7 +362,7 @@ fail: static int __devinit r82600_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - debugf0("%s()\n", __func__); + debugf0("\n"); /* don't need to call pci_enable_device() */ return r82600_probe1(pdev, ent->driver_data); @@ -374,7 +372,7 @@ static void __devexit r82600_remove_one(struct pci_dev *pdev) { struct mem_ctl_info *mci; - debugf0("%s()\n", __func__); + debugf0("\n"); if (r82600_pci) edac_pci_release_generic_ctl(r82600_pci); |