diff options
Diffstat (limited to 'drivers/edac')
-rw-r--r-- | drivers/edac/Kconfig | 8 | ||||
-rw-r--r-- | drivers/edac/amd64_edac.c | 213 | ||||
-rw-r--r-- | drivers/edac/amd64_edac.h | 48 | ||||
-rw-r--r-- | drivers/edac/e752x_edac.c | 4 | ||||
-rw-r--r-- | drivers/edac/edac_core.h | 17 | ||||
-rw-r--r-- | drivers/edac/edac_mc_sysfs.c | 86 | ||||
-rw-r--r-- | drivers/edac/edac_mce_amd.c | 16 | ||||
-rw-r--r-- | drivers/edac/i5100_edac.c | 7 |
8 files changed, 120 insertions, 279 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 0d2f9dbb47e..70bb350de99 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -39,14 +39,6 @@ config EDAC_DEBUG there're four debug levels (x=0,1,2,3 from low to high). Usually you should select 'N'. -config EDAC_DEBUG_VERBOSE - bool "More verbose debugging" - depends on EDAC_DEBUG - help - This option makes debugging information more verbose. - Source file name and line number where debugging message - printed will be added to debugging message. - config EDAC_DECODE_MCE tristate "Decode MCEs in human-readable form (only on AMD for now)" depends on CPU_SUP_AMD && X86_MCE diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ac9f7985096..670239ab751 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -160,7 +160,7 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, return 0; } -static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth) +static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth) { struct amd64_pvt *pvt = mci->pvt_info; u32 min_scrubrate = 0x0; @@ -178,10 +178,10 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth) default: amd64_printk(KERN_ERR, "Unsupported family!\n"); - break; + return -EINVAL; } - return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth, - min_scrubrate); + return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, bandwidth, + min_scrubrate); } static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) @@ -796,6 +796,11 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16); +static u16 extract_syndrome(struct err_regs *err) +{ + return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00); +} + static void amd64_cpu_display_info(struct amd64_pvt *pvt) { if (boot_cpu_data.x86 == 0x11) @@ -888,6 +893,9 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt) return; } + amd64_printk(KERN_INFO, "using %s syndromes.\n", + ((pvt->syn_type == 8) ? "x8" : "x4")); + /* Only if NOT ganged does dclr1 have valid info */ if (!dct_ganging_enabled(pvt)) amd64_dump_dramcfg_low(pvt->dclr1, 1); @@ -1101,20 +1109,17 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram) } static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, - struct err_regs *info, - u64 sys_addr) + struct err_regs *err_info, u64 sys_addr) { struct mem_ctl_info *src_mci; - unsigned short syndrome; int channel, csrow; u32 page, offset; + u16 syndrome; - /* Extract the syndrome parts and form a 16-bit syndrome */ - syndrome = HIGH_SYNDROME(info->nbsl) << 8; - syndrome |= LOW_SYNDROME(info->nbsh); + syndrome = extract_syndrome(err_info); /* CHIPKILL enabled */ - if (info->nbcfg & K8_NBCFG_CHIPKILL) { + if (err_info->nbcfg & K8_NBCFG_CHIPKILL) { channel = get_channel_from_ecc_syndrome(mci, syndrome); if (channel < 0) { /* @@ -1123,8 +1128,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, * as suspect. */ amd64_mc_printk(mci, KERN_WARNING, - "unknown syndrome 0x%x - possible error " - "reporting race\n", syndrome); + "unknown syndrome 0x%04x - possible " + "error reporting race\n", syndrome); edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); return; } @@ -1430,7 +1435,7 @@ static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel, u64 chan_off; if (hi_range_sel) { - if (!(dct_sel_base_addr & 0xFFFFF800) && + if (!(dct_sel_base_addr & 0xFFFF0000) && hole_valid && (sys_addr >= 0x100000000ULL)) chan_off = hole_off << 16; else @@ -1654,13 +1659,13 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, * (MCX_ADDR). */ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, - struct err_regs *info, + struct err_regs *err_info, u64 sys_addr) { struct amd64_pvt *pvt = mci->pvt_info; u32 page, offset; - unsigned short syndrome; int nid, csrow, chan = 0; + u16 syndrome; csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); @@ -1671,15 +1676,14 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, error_address_to_page_and_offset(sys_addr, &page, &offset); - syndrome = HIGH_SYNDROME(info->nbsl) << 8; - syndrome |= LOW_SYNDROME(info->nbsh); + syndrome = extract_syndrome(err_info); /* * We need the syndromes for channel detection only when we're * ganged. Otherwise @chan should already contain the channel at * this point. */ - if (dct_ganging_enabled(pvt) && pvt->nbcfg & K8_NBCFG_CHIPKILL) + if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL)) chan = get_channel_from_ecc_syndrome(mci, syndrome); if (chan >= 0) @@ -1878,7 +1882,7 @@ static u16 x8_vectors[] = { }; static int decode_syndrome(u16 syndrome, u16 *vectors, int num_vecs, - int v_dim) + int v_dim) { unsigned int i, err_sym; @@ -1955,124 +1959,23 @@ static int map_err_sym_to_channel(int err_sym, int sym_size) static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome) { struct amd64_pvt *pvt = mci->pvt_info; - u32 value = 0; - int err_sym = 0; - - if (boot_cpu_data.x86 == 0x10) { - - amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value); - - /* F3x180[EccSymbolSize]=1 => x8 symbols */ - if (boot_cpu_data.x86_model > 7 && - value & BIT(25)) { - err_sym = decode_syndrome(syndrome, x8_vectors, - ARRAY_SIZE(x8_vectors), 8); - return map_err_sym_to_channel(err_sym, 8); - } + int err_sym = -1; + + if (pvt->syn_type == 8) + err_sym = decode_syndrome(syndrome, x8_vectors, + ARRAY_SIZE(x8_vectors), + pvt->syn_type); + else if (pvt->syn_type == 4) + err_sym = decode_syndrome(syndrome, x4_vectors, + ARRAY_SIZE(x4_vectors), + pvt->syn_type); + else { + amd64_printk(KERN_WARNING, "%s: Illegal syndrome type: %u\n", + __func__, pvt->syn_type); + return err_sym; } - err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), 4); - return map_err_sym_to_channel(err_sym, 4); -} - -/* - * Check for valid error in the NB Status High register. If so, proceed to read - * NB Status Low, NB Address Low and NB Address High registers and store data - * into error structure. - * - * Returns: - * - 1: if hardware regs contains valid error info - * - 0: if no valid error is indicated - */ -static int amd64_get_error_info_regs(struct mem_ctl_info *mci, - struct err_regs *regs) -{ - struct amd64_pvt *pvt; - struct pci_dev *misc_f3_ctl; - - pvt = mci->pvt_info; - misc_f3_ctl = pvt->misc_f3_ctl; - - if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSH, ®s->nbsh)) - return 0; - - if (!(regs->nbsh & K8_NBSH_VALID_BIT)) - return 0; - - /* valid error, read remaining error information registers */ - if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSL, ®s->nbsl) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAL, ®s->nbeal) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAH, ®s->nbeah) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBCFG, ®s->nbcfg)) - return 0; - - return 1; -} - -/* - * This function is called to retrieve the error data from hardware and store it - * in the info structure. - * - * Returns: - * - 1: if a valid error is found - * - 0: if no error is found - */ -static int amd64_get_error_info(struct mem_ctl_info *mci, - struct err_regs *info) -{ - struct amd64_pvt *pvt; - struct err_regs regs; - - pvt = mci->pvt_info; - - if (!amd64_get_error_info_regs(mci, info)) - return 0; - - /* - * Here's the problem with the K8's EDAC reporting: There are four - * registers which report pieces of error information. They are shared - * between CEs and UEs. Furthermore, contrary to what is stated in the - * BKDG, the overflow bit is never used! Every error always updates the - * reporting registers. - * - * Can you see the race condition? All four error reporting registers - * must be read before a new error updates them! There is no way to read - * all four registers atomically. The best than can be done is to detect - * that a race has occured and then report the error without any kind of - * precision. - * - * What is still positive is that errors are still reported and thus - * problems can still be detected - just not localized because the - * syndrome and address are spread out across registers. - * - * Grrrrr!!!!! Here's hoping that AMD fixes this in some future K8 rev. - * UEs and CEs should have separate register sets with proper overflow - * bits that are used! At very least the problem can be fixed by - * honoring the ErrValid bit in 'nbsh' and not updating registers - just - * set the overflow bit - unless the current error is CE and the new - * error is UE which would be the only situation for overwriting the - * current values. - */ - - regs = *info; - - /* Use info from the second read - most current */ - if (unlikely(!amd64_get_error_info_regs(mci, info))) - return 0; - /* clear the error bits in hardware */ - pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT); - - /* Check for the possible race condition */ - if ((regs.nbsh != info->nbsh) || - (regs.nbsl != info->nbsl) || - (regs.nbeah != info->nbeah) || - (regs.nbeal != info->nbeal)) { - amd64_mc_printk(mci, KERN_WARNING, - "hardware STATUS read access race condition " - "detected!\n"); - return 0; - } - return 1; + return map_err_sym_to_channel(err_sym, pvt->syn_type); } /* @@ -2177,7 +2080,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, * catastrophic. */ if (info->nbsh & K8_NBSH_OVERFLOW) - edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow"); + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR " Error Overflow"); } void amd64_decode_bus_error(int node_id, struct err_regs *regs) @@ -2199,20 +2102,6 @@ void amd64_decode_bus_error(int node_id, struct err_regs *regs) } /* - * The main polling 'check' function, called FROM the edac core to perform the - * error checking and if an error is encountered, error processing. - */ -static void amd64_check(struct mem_ctl_info *mci) -{ - struct err_regs regs; - - if (amd64_get_error_info(mci, ®s)) { - struct amd64_pvt *pvt = mci->pvt_info; - amd_decode_nb_mce(pvt->mc_node_id, ®s, 1); - } -} - -/* * Input: * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer * 2) AMD Family index value @@ -2284,6 +2173,7 @@ static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt) static void amd64_read_mc_registers(struct amd64_pvt *pvt) { u64 msr_val; + u32 tmp; int dram; /* @@ -2349,10 +2239,22 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt) amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0); - if (!dct_ganging_enabled(pvt) && boot_cpu_data.x86 >= 0x10) { - amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); - amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1); + if (boot_cpu_data.x86 >= 0x10) { + if (!dct_ganging_enabled(pvt)) { + amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); + amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1); + } + amd64_read_pci_cfg(pvt->misc_f3_ctl, EXT_NB_MCA_CFG, &tmp); } + + if (boot_cpu_data.x86 == 0x10 && + boot_cpu_data.x86_model > 7 && + /* F3x180[EccSymbolSize]=1 => x8 symbols */ + tmp & BIT(25)) + pvt->syn_type = 8; + else + pvt->syn_type = 4; + amd64_dump_misc_regs(pvt); } @@ -2739,9 +2641,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) mci->dev_name = pci_name(pvt->dram_f2_ctl); mci->ctl_page_to_phys = NULL; - /* IMPORTANT: Set the polling 'check' function in this module */ - mci->edac_check = amd64_check; - /* memory scrubber interface */ mci->set_sdram_scrub_rate = amd64_set_scrub_rate; mci->get_sdram_scrub_rate = amd64_get_scrub_rate; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 0d4bf563824..613b9381e71 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -244,44 +244,17 @@ #define F10_DCTL_SEL_LOW 0x110 - -#define dct_sel_baseaddr(pvt) \ - ((pvt->dram_ctl_select_low) & 0xFFFFF800) - -#define dct_sel_interleave_addr(pvt) \ - (((pvt->dram_ctl_select_low) >> 6) & 0x3) - -enum { - F10_DCTL_SEL_LOW_DctSelHiRngEn = BIT(0), - F10_DCTL_SEL_LOW_DctSelIntLvEn = BIT(2), - F10_DCTL_SEL_LOW_DctGangEn = BIT(4), - F10_DCTL_SEL_LOW_DctDatIntLv = BIT(5), - F10_DCTL_SEL_LOW_DramEnable = BIT(8), - F10_DCTL_SEL_LOW_MemCleared = BIT(10), -}; - -#define dct_high_range_enabled(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn) - -#define dct_interleave_enabled(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn) - -#define dct_ganging_enabled(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn) - -#define dct_data_intlv_enabled(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv) - -#define dct_dram_enabled(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable) - -#define dct_memory_cleared(pvt) \ - (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared) - +#define dct_sel_baseaddr(pvt) ((pvt->dram_ctl_select_low) & 0xFFFFF800) +#define dct_sel_interleave_addr(pvt) (((pvt->dram_ctl_select_low) >> 6) & 0x3) +#define dct_high_range_enabled(pvt) (pvt->dram_ctl_select_low & BIT(0)) +#define dct_interleave_enabled(pvt) (pvt->dram_ctl_select_low & BIT(2)) +#define dct_ganging_enabled(pvt) (pvt->dram_ctl_select_low & BIT(4)) +#define dct_data_intlv_enabled(pvt) (pvt->dram_ctl_select_low & BIT(5)) +#define dct_dram_enabled(pvt) (pvt->dram_ctl_select_low & BIT(8)) +#define dct_memory_cleared(pvt) (pvt->dram_ctl_select_low & BIT(10)) #define F10_DCTL_SEL_HIGH 0x114 - /* * Function 3 - Misc Control */ @@ -382,6 +355,8 @@ enum { #define K8_NBCAP_SECDED BIT(3) #define K8_NBCAP_DCT_DUAL BIT(0) +#define EXT_NB_MCA_CFG 0x180 + /* MSRs */ #define K8_MSR_MCGCTL_NBE BIT(4) @@ -471,6 +446,9 @@ struct amd64_pvt { u32 dram_ctl_select_high; /* DRAM Controller Select High Reg */ u32 online_spare; /* On-Line spare Reg */ + /* x4 or x8 syndromes in use */ + u8 syn_type; + /* temp storage for when input is received from sysfs */ struct err_regs ctl_error_info; diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c index ae3f80c5419..073f5a06d23 100644 --- a/drivers/edac/e752x_edac.c +++ b/drivers/edac/e752x_edac.c @@ -958,7 +958,7 @@ static void e752x_check(struct mem_ctl_info *mci) } /* Program byte/sec bandwidth scrub rate to hardware */ -static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw) +static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) { const struct scrubrate *scrubrates; struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; @@ -975,7 +975,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw) * desired rate and program the cooresponding register value. */ for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++) - if (scrubrates[i].bandwidth >= *new_bw) + if (scrubrates[i].bandwidth >= new_bw) break; if (scrubrates[i].bandwidth == SDRATE_EOT) diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index efca9343d26..ce7146677e9 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -49,21 +49,15 @@ #define edac_printk(level, prefix, fmt, arg...) \ printk(level "EDAC " prefix ": " fmt, ##arg) -#define edac_printk_verbose(level, prefix, fmt, arg...) \ - printk(level "EDAC " prefix ": " "in %s, line at %d: " fmt, \ - __FILE__, __LINE__, ##arg) - #define edac_mc_printk(mci, level, fmt, arg...) \ printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg) #define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \ printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg) -/* edac_device printk */ #define edac_device_printk(ctl, level, fmt, arg...) \ printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg) -/* edac_pci printk */ #define edac_pci_printk(ctl, level, fmt, arg...) \ printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg) @@ -76,21 +70,12 @@ extern int edac_debug_level; extern const char *edac_mem_types[]; -#ifndef CONFIG_EDAC_DEBUG_VERBOSE #define edac_debug_printk(level, fmt, arg...) \ do { \ if (level <= edac_debug_level) \ edac_printk(KERN_DEBUG, EDAC_DEBUG, \ "%s: " fmt, __func__, ##arg); \ } while (0) -#else /* CONFIG_EDAC_DEBUG_VERBOSE */ -#define edac_debug_printk(level, fmt, arg...) \ - do { \ - if (level <= edac_debug_level) \ - edac_printk_verbose(KERN_DEBUG, EDAC_DEBUG, fmt, \ - ##arg); \ - } while (0) -#endif #define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ ) #define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ ) @@ -393,7 +378,7 @@ struct mem_ctl_info { internal representation and configures whatever else needs to be configured. */ - int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw); + int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw); /* Get the current sdram memory scrub rate from the internal representation and converts it to the closest matching diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index c200c2fd43e..8aad94d10c0 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -124,19 +124,6 @@ static const char *edac_caps[] = { [EDAC_S16ECD16ED] = "S16ECD16ED" }; - - -static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) -{ - int *value = (int *)ptr; - - if (isdigit(*buffer)) - *value = simple_strtoul(buffer, NULL, 0); - - return count; -} - - /* EDAC sysfs CSROW data structures and methods */ @@ -450,53 +437,54 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci, /* memory scrubbing */ static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci, - const char *data, size_t count) + const char *data, size_t count) { - u32 bandwidth = -1; + unsigned long bandwidth = 0; + int err; - if (mci->set_sdram_scrub_rate) { + if (!mci->set_sdram_scrub_rate) { + edac_printk(KERN_WARNING, EDAC_MC, + "Memory scrub rate setting not implemented!\n"); + return -EINVAL; + } - memctrl_int_store(&bandwidth, data, count); + if (strict_strtoul(data, 10, &bandwidth) < 0) + return -EINVAL; - if (!(*mci->set_sdram_scrub_rate) (mci, &bandwidth)) { - edac_printk(KERN_DEBUG, EDAC_MC, - "Scrub rate set successfully, applied: %d\n", - bandwidth); - } else { - /* FIXME: error codes maybe? */ - edac_printk(KERN_DEBUG, EDAC_MC, - "Scrub rate set FAILED, could not apply: %d\n", - bandwidth); - } - } else { - /* FIXME: produce "not implemented" ERROR for user-side. */ - edac_printk(KERN_WARNING, EDAC_MC, - "Memory scrubbing 'set'control is not implemented!\n"); + err = mci->set_sdram_scrub_rate(mci, (u32)bandwidth); + if (err) { + edac_printk(KERN_DEBUG, EDAC_MC, + "Failed setting scrub rate to %lu\n", bandwidth); + return -EINVAL; + } + else { + edac_printk(KERN_DEBUG, EDAC_MC, + "Scrub rate set to: %lu\n", bandwidth); + return count; } - return count; } static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data) { - u32 bandwidth = -1; - - if (mci->get_sdram_scrub_rate) { - if (!(*mci->get_sdram_scrub_rate) (mci, &bandwidth)) { - edac_printk(KERN_DEBUG, EDAC_MC, - "Scrub rate successfully, fetched: %d\n", - bandwidth); - } else { - /* FIXME: error codes maybe? */ - edac_printk(KERN_DEBUG, EDAC_MC, - "Scrub rate fetch FAILED, got: %d\n", - bandwidth); - } - } else { - /* FIXME: produce "not implemented" ERROR for user-side. */ + u32 bandwidth = 0; + int err; + + if (!mci->get_sdram_scrub_rate) { edac_printk(KERN_WARNING, EDAC_MC, - "Memory scrubbing 'get' control is not implemented\n"); + "Memory scrub rate reading not implemented\n"); + return -EINVAL; + } + + err = mci->get_sdram_scrub_rate(mci, &bandwidth); + if (err) { + edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n"); + return err; + } + else { + edac_printk(KERN_DEBUG, EDAC_MC, + "Read scrub rate: %d\n", bandwidth); + return sprintf(data, "%d\n", bandwidth); } - return sprintf(data, "%d\n", bandwidth); } /* default attribute files for the MCI object */ diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c index 97e64bcdbc0..bae9351e947 100644 --- a/drivers/edac/edac_mce_amd.c +++ b/drivers/edac/edac_mce_amd.c @@ -133,7 +133,7 @@ static void amd_decode_dc_mce(u64 mc0_status) u32 ec = mc0_status & 0xffff; u32 xec = (mc0_status >> 16) & 0xf; - pr_emerg(" Data Cache Error"); + pr_emerg("Data Cache Error"); if (xec == 1 && TLB_ERROR(ec)) pr_cont(": %s TLB multimatch.\n", LL_MSG(ec)); @@ -176,7 +176,7 @@ static void amd_decode_ic_mce(u64 mc1_status) u32 ec = mc1_status & 0xffff; u32 xec = (mc1_status >> 16) & 0xf; - pr_emerg(" Instruction Cache Error"); + pr_emerg("Instruction Cache Error"); if (xec == 1 && TLB_ERROR(ec)) pr_cont(": %s TLB multimatch.\n", LL_MSG(ec)); @@ -233,7 +233,7 @@ static void amd_decode_bu_mce(u64 mc2_status) u32 ec = mc2_status & 0xffff; u32 xec = (mc2_status >> 16) & 0xf; - pr_emerg(" Bus Unit Error"); + pr_emerg("Bus Unit Error"); if (xec == 0x1) pr_cont(" in the write data buffers.\n"); @@ -275,7 +275,7 @@ static void amd_decode_ls_mce(u64 mc3_status) u32 ec = mc3_status & 0xffff; u32 xec = (mc3_status >> 16) & 0xf; - pr_emerg(" Load Store Error"); + pr_emerg("Load Store Error"); if (xec == 0x0) { u8 rrrr = (ec >> 4) & 0xf; @@ -304,7 +304,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) if (TLB_ERROR(ec) && !report_gart_errors) return; - pr_emerg(" Northbridge Error, node %d", node_id); + pr_emerg("Northbridge Error, node %d", node_id); /* * F10h, revD can disable ErrCpu[3:0] so check that first and also the @@ -342,13 +342,13 @@ static void amd_decode_fr_mce(u64 mc5_status) static inline void amd_decode_err_code(unsigned int ec) { if (TLB_ERROR(ec)) { - pr_emerg(" Transaction: %s, Cache Level %s\n", + pr_emerg("Transaction: %s, Cache Level %s\n", TT_MSG(ec), LL_MSG(ec)); } else if (MEM_ERROR(ec)) { - pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s", + pr_emerg("Transaction: %s, Type: %s, Cache Level: %s", RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec)); } else if (BUS_ERROR(ec)) { - pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, " + pr_emerg("Transaction type: %s(%s), %s, Cache Level: %s, " "Participating Processor: %s\n", RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec), PP_MSG(ec)); diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index ee9753cf362..f459a6c0886 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -589,14 +589,13 @@ static void i5100_refresh_scrubbing(struct work_struct *work) /* * The bandwidth is based on experimentation, feel free to refine it. */ -static int i5100_set_scrub_rate(struct mem_ctl_info *mci, - u32 *bandwidth) +static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth) { struct i5100_priv *priv = mci->pvt_info; u32 dw; pci_read_config_dword(priv->mc, I5100_MC, &dw); - if (*bandwidth) { + if (bandwidth) { priv->scrub_enable = 1; dw |= I5100_MC_SCRBEN_MASK; schedule_delayed_work(&(priv->i5100_scrubbing), @@ -610,7 +609,7 @@ static int i5100_set_scrub_rate(struct mem_ctl_info *mci, pci_read_config_dword(priv->mc, I5100_MC, &dw); - *bandwidth = 5900000 * i5100_mc_scrben(dw); + bandwidth = 5900000 * i5100_mc_scrben(dw); return 0; } |