summaryrefslogtreecommitdiffstats
path: root/drivers/edac
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac')
-rw-r--r--drivers/edac/Kconfig11
-rw-r--r--drivers/edac/Makefile1
-rw-r--r--drivers/edac/amd64_edac.c25
-rw-r--r--drivers/edac/amd64_edac.h2
-rw-r--r--drivers/edac/amd8111_edac.c3
-rw-r--r--drivers/edac/cell_edac.c2
-rw-r--r--drivers/edac/cpc925_edac.c1017
-rw-r--r--drivers/edac/e752x_edac.c2
-rw-r--r--drivers/edac/edac_core.h5
-rw-r--r--drivers/edac/edac_device.c14
-rw-r--r--drivers/edac/edac_mc_sysfs.c4
-rw-r--r--drivers/edac/mpc85xx_edac.c6
-rw-r--r--drivers/edac/mpc85xx_edac.h1
13 files changed, 1076 insertions, 17 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index ab4f3592a11..4339b1a879c 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -5,7 +5,7 @@
#
menuconfig EDAC
- bool "EDAC - error detection and reporting"
+ bool "EDAC (Error Detection And Correction) reporting"
depends on HAS_IOMEM
depends on X86 || PPC
help
@@ -232,4 +232,13 @@ config EDAC_AMD8111
Note, add more Kconfig dependency if it's adopted
on some machine other than Maple.
+config EDAC_CPC925
+ tristate "IBM CPC925 Memory Controller (PPC970FX)"
+ depends on EDAC_MM_EDAC && PPC64
+ help
+ Support for error detection and correction on the
+ IBM CPC925 Bridge and Memory Controller, which is
+ a companion chip to the PowerPC 970 family of
+ processors.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 633dc5604ee..98aa4a7db41 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -18,6 +18,7 @@ edac_core-objs += edac_pci.o edac_pci_sysfs.o
endif
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
+obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
obj-$(CONFIG_EDAC_I5100) += i5100_edac.o
obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40568c..858fe603722 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt)
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
int bit;
- enum dev_type edac_cap = EDAC_NONE;
+ enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
? 19
: 17;
- if (pvt->dclr0 >> BIT(bit))
+ if (pvt->dclr0 & BIT(bit))
edac_cap = EDAC_FLAG_SECDED;
return edac_cap;
@@ -1269,7 +1269,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
if (channels == 0)
channels = 1;
- debugf0("DIMM count= %d\n", channels);
+ debugf0("MCT channel count: %d\n", channels);
return channels;
@@ -2966,7 +2966,12 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
" Use of the override can cause "
"unknown side effects.\n");
ret = -ENODEV;
- }
+ } else
+ /*
+ * enable further driver loading if ECC enable is
+ * overridden.
+ */
+ ret = 0;
} else {
amd64_printk(KERN_INFO,
"ECC is enabled by BIOS, Proceeding "
@@ -3006,7 +3011,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
- mci->edac_cap = EDAC_FLAG_NONE;
if (pvt->nbcap & K8_NBCAP_SECDED)
mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3056,7 @@ static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
if (!pvt)
goto err_exit;
- pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+ pvt->mc_node_id = get_node_id(dram_f2_ctl);
pvt->dram_f2_ctl = dram_f2_ctl;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3183,7 @@ static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
{
int ret = 0;
- debugf0("(MC node=%d,mc_type='%s')\n",
- get_mc_node_id_from_pdev(pdev),
+ debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
get_amd_family_name(mc_type->driver_data));
ret = pci_enable_device(pdev);
@@ -3319,15 +3322,17 @@ static int __init amd64_edac_init(void)
err = amd64_init_2nd_stage(pvt_lookup[nb]);
if (err)
- goto err_exit;
+ goto err_2nd_stage;
}
amd64_setup_pci_device();
return 0;
+err_2nd_stage:
+ debugf0("2nd stage failed\n");
+
err_exit:
- debugf0("'finish_setup' stage failed\n");
pci_unregister_driver(&amd64_pci_driver);
return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957e167..ba73015af8e 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@ enum {
#define K8_MSR_MC4ADDR 0x0412
/* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
{
return PCI_SLOT(pdev->devfn) - 0x18;
}
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 2cb58ef743e..35b78d04bbf 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -37,7 +37,6 @@
#define AMD8111_EDAC_MOD_STR "amd8111_edac"
#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460
-static int edac_dev_idx;
enum amd8111_edac_devs {
LPC_BRIDGE = 0,
@@ -377,7 +376,7 @@ static int amd8111_dev_probe(struct pci_dev *dev,
* edac_device_ctl_info, but make use of existing
* one instead.
*/
- dev_info->edac_idx = edac_dev_idx++;
+ dev_info->edac_idx = edac_device_alloc_index();
dev_info->edac_dev =
edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1,
NULL, 0, 0,
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index cb0f639f049..c973004c002 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -227,7 +227,7 @@ static struct platform_driver cell_edac_driver = {
.owner = THIS_MODULE,
},
.probe = cell_edac_probe,
- .remove = cell_edac_remove,
+ .remove = __devexit_p(cell_edac_remove),
};
static int __init cell_edac_init(void)
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
new file mode 100644
index 00000000000..8c54196b5ab
--- /dev/null
+++ b/drivers/edac/cpc925_edac.c
@@ -0,0 +1,1017 @@
+/*
+ * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller.
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors: Cao Qingtao <qingtao.cao@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define CPC925_EDAC_REVISION " Ver: 1.0.0 " __DATE__
+#define CPC925_EDAC_MOD_STR "cpc925_edac"
+
+#define cpc925_printk(level, fmt, arg...) \
+ edac_printk(level, "CPC925", fmt, ##arg)
+
+#define cpc925_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg)
+
+/*
+ * CPC925 registers are of 32 bits with bit0 defined at the
+ * most significant bit and bit31 at that of least significant.
+ */
+#define CPC925_BITS_PER_REG 32
+#define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr))
+
+/*
+ * EDAC device names for the error detections of
+ * CPU Interface and Hypertransport Link.
+ */
+#define CPC925_CPU_ERR_DEV "cpu"
+#define CPC925_HT_LINK_DEV "htlink"
+
+/* Suppose DDR Refresh cycle is 15.6 microsecond */
+#define CPC925_REF_FREQ 0xFA69
+#define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */
+#define CPC925_NR_CSROWS 8
+
+/*
+ * All registers and bits definitions are taken from
+ * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02".
+ */
+
+/*
+ * CPU and Memory Controller Registers
+ */
+/************************************************************
+ * Processor Interface Exception Mask Register (APIMASK)
+ ************************************************************/
+#define REG_APIMASK_OFFSET 0x30070
+enum apimask_bits {
+ APIMASK_DART = CPC925_BIT(0), /* DART Exception */
+ APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+ APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+ APIMASK_STAT = CPC925_BIT(3), /* Status Exception */
+ APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */
+ APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */
+ APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */
+ /* BIT(7) Reserved */
+ APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+ APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+ APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+ APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+ CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 |
+ APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 |
+ APIMASK_ADRS1),
+ ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
+ APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
+};
+
+/************************************************************
+ * Processor Interface Exception Register (APIEXCP)
+ ************************************************************/
+#define REG_APIEXCP_OFFSET 0x30060
+enum apiexcp_bits {
+ APIEXCP_DART = CPC925_BIT(0), /* DART Exception */
+ APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+ APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+ APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */
+ APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */
+ APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */
+ APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */
+ /* BIT(7) Reserved */
+ APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+ APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+ APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+ APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+ CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 |
+ APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 |
+ APIEXCP_ADRS1),
+ UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L),
+ CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L),
+ ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED),
+};
+
+/************************************************************
+ * Memory Bus Configuration Register (MBCR)
+************************************************************/
+#define REG_MBCR_OFFSET 0x2190
+#define MBCR_64BITCFG_SHIFT 23
+#define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT)
+#define MBCR_64BITBUS_SHIFT 22
+#define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT)
+
+/************************************************************
+ * Memory Bank Mode Register (MBMR)
+************************************************************/
+#define REG_MBMR_OFFSET 0x21C0
+#define MBMR_MODE_MAX_VALUE 0xF
+#define MBMR_MODE_SHIFT 25
+#define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT)
+#define MBMR_BBA_SHIFT 24
+#define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT)
+
+/************************************************************
+ * Memory Bank Boundary Address Register (MBBAR)
+ ************************************************************/
+#define REG_MBBAR_OFFSET 0x21D0
+#define MBBAR_BBA_MAX_VALUE 0xFF
+#define MBBAR_BBA_SHIFT 24
+#define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT)
+
+/************************************************************
+ * Memory Scrub Control Register (MSCR)
+ ************************************************************/
+#define REG_MSCR_OFFSET 0x2400
+#define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/
+#define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */
+#define MSCR_SI_SHIFT 16 /* si - bit8:15*/
+#define MSCR_SI_MAX_VALUE 0xFF
+#define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT)
+
+/************************************************************
+ * Memory Scrub Range Start Register (MSRSR)
+ ************************************************************/
+#define REG_MSRSR_OFFSET 0x2410
+
+/************************************************************
+ * Memory Scrub Range End Register (MSRER)
+ ************************************************************/
+#define REG_MSRER_OFFSET 0x2420
+
+/************************************************************
+ * Memory Scrub Pattern Register (MSPR)
+ ************************************************************/
+#define REG_MSPR_OFFSET 0x2430
+
+/************************************************************
+ * Memory Check Control Register (MCCR)
+ ************************************************************/
+#define REG_MCCR_OFFSET 0x2440
+enum mccr_bits {
+ MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */
+};
+
+/************************************************************
+ * Memory Check Range End Register (MCRER)
+ ************************************************************/
+#define REG_MCRER_OFFSET 0x2450
+
+/************************************************************
+ * Memory Error Address Register (MEAR)
+ ************************************************************/
+#define REG_MEAR_OFFSET 0x2460
+#define MEAR_BCNT_MAX_VALUE 0x3
+#define MEAR_BCNT_SHIFT 30
+#define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT)
+#define MEAR_RANK_MAX_VALUE 0x7
+#define MEAR_RANK_SHIFT 27
+#define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT)
+#define MEAR_COL_MAX_VALUE 0x7FF
+#define MEAR_COL_SHIFT 16
+#define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT)
+#define MEAR_BANK_MAX_VALUE 0x3
+#define MEAR_BANK_SHIFT 14
+#define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT)
+#define MEAR_ROW_MASK 0x00003FFF
+
+/************************************************************
+ * Memory Error Syndrome Register (MESR)
+ ************************************************************/
+#define REG_MESR_OFFSET 0x2470
+#define MESR_ECC_SYN_H_MASK 0xFF00
+#define MESR_ECC_SYN_L_MASK 0x00FF
+
+/************************************************************
+ * Memory Mode Control Register (MMCR)
+ ************************************************************/
+#define REG_MMCR_OFFSET 0x2500
+enum mmcr_bits {
+ MMCR_REG_DIMM_MODE = CPC925_BIT(3),
+};
+
+/*
+ * HyperTransport Link Registers
+ */
+/************************************************************
+ * Error Handling/Enumeration Scratch Pad Register (ERRCTRL)
+ ************************************************************/
+#define REG_ERRCTRL_OFFSET 0x70140
+enum errctrl_bits { /* nonfatal interrupts for */
+ ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */
+ ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */
+ ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */
+ ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */
+ ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */
+ ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */
+
+ ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */
+ ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */
+
+ HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF |
+ ERRCTRL_RSP_NF | ERRCTRL_EOC_NF |
+ ERRCTRL_OVF_NF | ERRCTRL_PROT_NF),
+ HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL),
+};
+
+/************************************************************
+ * Link Configuration and Link Control Register (LINKCTRL)
+ ************************************************************/
+#define REG_LINKCTRL_OFFSET 0x70110
+enum linkctrl_bits {
+ LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)),
+ LINKCTRL_LINK_FAIL = CPC925_BIT(27),
+
+ HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL),
+};
+
+/************************************************************
+ * Link FreqCap/Error/Freq/Revision ID Register (LINKERR)
+ ************************************************************/
+#define REG_LINKERR_OFFSET 0x70120
+enum linkerr_bits {
+ LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */
+ LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */
+ LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */
+
+ HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR |
+ LINKERR_PROT_ERR),
+};
+
+/************************************************************
+ * Bridge Control Register (BRGCTRL)
+ ************************************************************/
+#define REG_BRGCTRL_OFFSET 0x70300
+enum brgctrl_bits {
+ BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */
+ BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */
+};
+
+/* Private structure for edac memory controller */
+struct cpc925_mc_pdata {
+ void __iomem *vbase;
+ unsigned long total_mem;
+ const char *name;
+ int edac_idx;
+};
+
+/* Private structure for common edac device */
+struct cpc925_dev_info {
+ void __iomem *vbase;
+ struct platform_device *pdev;
+ char *ctl_name;
+ int edac_idx;
+ struct edac_device_ctl_info *edac_dev;
+ void (*init)(struct cpc925_dev_info *dev_info);
+ void (*exit)(struct cpc925_dev_info *dev_info);
+ void (*check)(struct edac_device_ctl_info *edac_dev);
+};
+
+/* Get total memory size from Open Firmware DTB */
+static void get_total_mem(struct cpc925_mc_pdata *pdata)
+{
+ struct device_node *np = NULL;
+ const unsigned int *reg, *reg_end;
+ int len, sw, aw;
+ unsigned long start, size;
+
+ np = of_find_node_by_type(NULL, "memory");
+ if (!np)
+ return;
+
+ aw = of_n_addr_cells(np);
+ sw = of_n_size_cells(np);
+ reg = (const unsigned int *)of_get_property(np, "reg", &len);
+ reg_end = reg + len/4;
+
+ pdata->total_mem = 0;
+ do {
+ start = of_read_number(reg, aw);
+ reg += aw;
+ size = of_read_number(reg, sw);
+ reg += sw;
+ debugf1("%s: start 0x%lx, size 0x%lx\n", __func__,
+ start, size);
+ pdata->total_mem += size;
+ } while (reg < reg_end);
+
+ of_node_put(np);
+ debugf0("%s: total_mem 0x%lx\n", __func__, pdata->total_mem);
+}
+
+static void cpc925_init_csrows(struct mem_ctl_info *mci)
+{
+ struct cpc925_mc_pdata *pdata = mci->pvt_info;
+ struct csrow_info *csrow;
+ int index;
+ u32 mbmr, mbbar, bba;
+ unsigned long row_size, last_nr_pages = 0;
+
+ get_total_mem(pdata);
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET +
+ 0x20 * index);
+ mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET +
+ 0x20 + index);
+ bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) |
+ ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT);
+
+ if (bba == 0)
+ continue; /* not populated */
+
+ csrow = &mci->csrows[index];
+
+ row_size = bba * (1UL << 28); /* 256M */
+ csrow->first_page = last_nr_pages;
+ csrow->nr_pages = row_size >> PAGE_SHIFT;
+ csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
+ last_nr_pages = csrow->last_page + 1;
+
+ csrow->mtype = MEM_RDDR;
+ csrow->edac_mode = EDAC_SECDED;
+
+ switch (csrow->nr_channels) {
+ case 1: /* Single channel */
+ csrow->grain = 32; /* four-beat burst of 32 bytes */
+ break;
+ case 2: /* Dual channel */
+ default:
+ csrow->grain = 64; /* four-beat burst of 64 bytes */
+ break;
+ }
+
+ switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) {
+ case 6: /* 0110, no way to differentiate X8 VS X16 */
+ case 5: /* 0101 */
+ case 8: /* 1000 */
+ csrow->dtype = DEV_X16;
+ break;
+ case 7: /* 0111 */
+ case 9: /* 1001 */
+ csrow->dtype = DEV_X8;
+ break;
+ default:
+ csrow->dtype = DEV_UNKNOWN;
+ break;
+ }
+ }
+}
+
+/* Enable memory controller ECC detection */
+static void cpc925_mc_init(struct mem_ctl_info *mci)
+{
+ struct cpc925_mc_pdata *pdata = mci->pvt_info;
+ u32 apimask;
+ u32 mccr;
+
+ /* Enable various ECC error exceptions */
+ apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET);
+ if ((apimask & ECC_MASK_ENABLE) == 0) {
+ apimask |= ECC_MASK_ENABLE;
+ __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET);
+ }
+
+ /* Enable ECC detection */
+ mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET);
+ if ((mccr & MCCR_ECC_EN) == 0) {
+ mccr |= MCCR_ECC_EN;
+ __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET);
+ }
+}
+
+/* Disable memory controller ECC detection */
+static void cpc925_mc_exit(struct mem_ctl_info *mci)
+{
+ /*
+ * WARNING:
+ * We are supposed to clear the ECC error detection bits,
+ * and it will be no problem to do so. However, once they
+ * are cleared here if we want to re-install CPC925 EDAC
+ * module later, setting them up in cpc925_mc_init() will
+ * trigger machine check exception.
+ * Also, it's ok to leave ECC error detection bits enabled,
+ * since they are reset to 1 by default or by boot loader.
+ */
+
+ return;
+}
+
+/*
+ * Revert DDR column/row/bank addresses into page frame number and
+ * offset in page.
+ *
+ * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs),
+ * physical address(PA) bits to column address(CA) bits mappings are:
+ * CA 0 1 2 3 4 5 6 7 8 9 10
+ * PA 59 58 57 56 55 54 53 52 51 50 49
+ *
+ * physical address(PA) bits to bank address(BA) bits mappings are:
+ * BA 0 1
+ * PA 43 44
+ *
+ * physical address(PA) bits to row address(RA) bits mappings are:
+ * RA 0 1 2 3 4 5 6 7 8 9 10 11 12
+ * PA 36 35 34 48 47 46 45 40 41 42 39 38 37
+ */
+static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear,
+ unsigned long *pfn, unsigned long *offset, int *csrow)
+{
+ u32 bcnt, rank, col, bank, row;
+ u32 c;
+ unsigned long pa;
+ int i;
+
+ bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT;
+ rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT;
+ col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT;
+ bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT;
+ row = mear & MEAR_ROW_MASK;
+
+ *csrow = rank;
+
+#ifdef CONFIG_EDAC_DEBUG
+ if (mci->csrows[rank].first_page == 0) {
+ cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a "
+ "non-populated csrow, broken hardware?\n");
+ return;
+ }
+#endif
+
+ /* Revert csrow number */
+ pa = mci->csrows[rank].first_page << PAGE_SHIFT;
+
+ /* Revert column address */
+ col += bcnt;
+ for (i = 0; i < 11; i++) {
+ c = col & 0x1;
+ col >>= 1;
+ pa |= c << (14 - i);
+ }
+
+ /* Revert bank address */
+ pa |= bank << 19;
+
+ /* Revert row address, in 4 steps */
+ for (i = 0; i < 3; i++) {
+ c = row & 0x1;
+ row >>= 1;
+ pa |= c << (26 - i);
+ }
+
+ for (i = 0; i < 3; i++) {
+ c = row & 0x1;
+ row >>= 1;
+ pa |= c << (21 + i);
+ }
+
+ for (i = 0; i < 4; i++) {
+ c = row & 0x1;
+ row >>= 1;
+ pa |= c << (18 - i);
+ }
+
+ for (i = 0; i < 3; i++) {
+ c = row & 0x1;
+ row >>= 1;
+ pa |= c << (29 - i);
+ }
+
+ *offset = pa & (PAGE_SIZE - 1);
+ *pfn = pa >> PAGE_SHIFT;
+
+ debugf0("%s: ECC physical address 0x%lx\n", __func__, pa);
+}
+
+static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome)
+{
+ if ((syndrome & MESR_ECC_SYN_H_MASK) == 0)
+ return 0;
+
+ if ((syndrome & MESR_ECC_SYN_L_MASK) == 0)
+ return 1;
+
+ cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n",
+ syndrome);
+ return 1;
+}
+
+/* Check memory controller registers for ECC errors */
+static void cpc925_mc_check(struct mem_ctl_info *mci)
+{
+ struct cpc925_mc_pdata *pdata = mci->pvt_info;
+ u32 apiexcp;
+ u32 mear;
+ u32 mesr;
+ u16 syndrome;
+ unsigned long pfn = 0, offset = 0;
+ int csrow = 0, channel = 0;
+
+ /* APIEXCP is cleared when read */
+ apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET);
+ if ((apiexcp & ECC_EXCP_DETECTED) == 0)
+ return;
+
+ mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET);
+ syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK);
+
+ mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET);
+
+ /* Revert column/row addresses into page frame number, etc */
+ cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow);
+
+ if (apiexcp & CECC_EXCP_DETECTED) {
+ cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n");
+ channel = cpc925_mc_find_channel(mci, syndrome);
+ edac_mc_handle_ce(mci, pfn, offset, syndrome,
+ csrow, channel, mci->ctl_name);
+ }
+
+ if (apiexcp & UECC_EXCP_DETECTED) {
+ cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n");
+ edac_mc_handle_ue(mci, pfn, offset, csrow, mci->ctl_name);
+ }
+
+ cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n");
+ cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_APIMASK_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n",
+ apiexcp);
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MSCR_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MSRSR_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MSRER_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MSPR_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MCCR_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n",
+ __raw_readl(pdata->vbase + REG_MCRER_OFFSET));
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n",
+ mesr);
+ cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n",
+ syndrome);
+}
+
+/******************** CPU err device********************************/
+/* Enable CPU Errors detection */
+static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
+{
+ u32 apimask;
+
+ apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+ if ((apimask & CPU_MASK_ENABLE) == 0) {
+ apimask |= CPU_MASK_ENABLE;
+ __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
+ }
+}
+
+/* Disable CPU Errors detection */
+static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info)
+{
+ /*
+ * WARNING:
+ * We are supposed to clear the CPU error detection bits,
+ * and it will be no problem to do so. However, once they
+ * are cleared here if we want to re-install CPC925 EDAC
+ * module later, setting them up in cpc925_cpu_init() will
+ * trigger machine check exception.
+ * Also, it's ok to leave CPU error detection bits enabled,
+ * since they are reset to 1 by default.
+ */
+
+ return;
+}
+
+/* Check for CPU Errors */
+static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev)
+{
+ struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+ u32 apiexcp;
+ u32 apimask;
+
+ /* APIEXCP is cleared when read */
+ apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET);
+ if ((apiexcp & CPU_EXCP_DETECTED) == 0)
+ return;
+
+ apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+ cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
+ "Processor Interface register dump:\n");
+ cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask);
+ cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp);
+
+ edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+/******************** HT Link err device****************************/
+/* Enable HyperTransport Link Error detection */
+static void cpc925_htlink_init(struct cpc925_dev_info *dev_info)
+{
+ u32 ht_errctrl;
+
+ ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+ if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) {
+ ht_errctrl |= HT_ERRCTRL_ENABLE;
+ __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+ }
+}
+
+/* Disable HyperTransport Link Error detection */
+static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info)
+{
+ u32 ht_errctrl;
+
+ ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+ ht_errctrl &= ~HT_ERRCTRL_ENABLE;
+ __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+}
+
+/* Check for HyperTransport Link errors */
+static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev)
+{
+ struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+ u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET);
+ u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET);
+ u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+ u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET);
+
+ if (!((brgctrl & BRGCTRL_DETSERR) ||
+ (linkctrl & HT_LINKCTRL_DETECTED) ||
+ (errctrl & HT_ERRCTRL_DETECTED) ||
+ (linkerr & HT_LINKERR_DETECTED)))
+ return;
+
+ cpc925_printk(KERN_INFO, "HT Link Fault\n"
+ "HT register dump:\n");
+ cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n",
+ brgctrl);
+ cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n",
+ linkctrl);
+ cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n",
+ errctrl);
+ cpc925_printk(KERN_INFO, "Link Error 0x%08x\n",
+ linkerr);
+
+ /* Clear by write 1 */
+ if (brgctrl & BRGCTRL_DETSERR)
+ __raw_writel(BRGCTRL_DETSERR,
+ dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+ if (linkctrl & HT_LINKCTRL_DETECTED)
+ __raw_writel(HT_LINKCTRL_DETECTED,
+ dev_info->vbase + REG_LINKCTRL_OFFSET);
+
+ /* Initiate Secondary Bus Reset to clear the chain failure */
+ if (errctrl & ERRCTRL_CHN_FAL)
+ __raw_writel(BRGCTRL_SECBUSRESET,
+ dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+ if (errctrl & ERRCTRL_RSP_ERR)
+ __raw_writel(ERRCTRL_RSP_ERR,
+ dev_info->vbase + REG_ERRCTRL_OFFSET);
+
+ if (linkerr & HT_LINKERR_DETECTED)
+ __raw_writel(HT_LINKERR_DETECTED,
+ dev_info->vbase + REG_LINKERR_OFFSET);
+
+ edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static struct cpc925_dev_info cpc925_devs[] = {
+ {
+ .ctl_name = CPC925_CPU_ERR_DEV,
+ .init = cpc925_cpu_init,
+ .exit = cpc925_cpu_exit,
+ .check = cpc925_cpu_check,
+ },
+ {
+ .ctl_name = CPC925_HT_LINK_DEV,
+ .init = cpc925_htlink_init,
+ .exit = cpc925_htlink_exit,
+ .check = cpc925_htlink_check,
+ },
+ {0}, /* Terminated by NULL */
+};
+
+/*
+ * Add CPU Err detection and HyperTransport Link Err detection
+ * as common "edac_device", they have no corresponding device
+ * nodes in the Open Firmware DTB and we have to add platform
+ * devices for them. Also, they will share the MMIO with that
+ * of memory controller.
+ */
+static void cpc925_add_edac_devices(void __iomem *vbase)
+{
+ struct cpc925_dev_info *dev_info;
+
+ if (!vbase) {
+ cpc925_printk(KERN_ERR, "MMIO not established yet\n");
+ return;
+ }
+
+ for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+ dev_info->vbase = vbase;
+ dev_info->pdev = platform_device_register_simple(
+ dev_info->ctl_name, 0, NULL, 0);
+ if (IS_ERR(dev_info->pdev)) {
+ cpc925_printk(KERN_ERR,
+ "Can't register platform device for %s\n",
+ dev_info->ctl_name);
+ continue;
+ }
+
+ /*
+ * Don't have to allocate private structure but
+ * make use of cpc925_devs[] instead.
+ */
+ dev_info->edac_idx = edac_device_alloc_index();
+ dev_info->edac_dev =
+ edac_device_alloc_ctl_info(0, dev_info->ctl_name,
+ 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx);
+ if (!dev_info->edac_dev) {
+ cpc925_printk(KERN_ERR, "No memory for edac device\n");
+ goto err1;
+ }
+
+ dev_info->edac_dev->pvt_info = dev_info;
+ dev_info->edac_dev->dev = &dev_info->pdev->dev;
+ dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+ dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev);
+
+ if (edac_op_state == EDAC_OPSTATE_POLL)
+ dev_info->edac_dev->edac_check = dev_info->check;
+
+ if (dev_info->init)
+ dev_info->init(dev_info);
+
+ if (edac_device_add_device(dev_info->edac_dev) > 0) {
+ cpc925_printk(KERN_ERR,
+ "Unable to add edac device for %s\n",
+ dev_info->ctl_name);
+ goto err2;
+ }
+
+ debugf0("%s: Successfully added edac device for %s\n",
+ __func__, dev_info->ctl_name);
+
+ continue;
+
+err2:
+ if (dev_info->exit)
+ dev_info->exit(dev_info);
+ edac_device_free_ctl_info(dev_info->edac_dev);
+err1:
+ platform_device_unregister(dev_info->pdev);
+ }
+}
+
+/*
+ * Delete the common "edac_device" for CPU Err Detection
+ * and HyperTransport Link Err Detection
+ */
+static void cpc925_del_edac_devices(void)
+{
+ struct cpc925_dev_info *dev_info;
+
+ for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+ if (dev_info->edac_dev) {
+ edac_device_del_device(dev_info->edac_dev->dev);
+ edac_device_free_ctl_info(dev_info->edac_dev);
+ platform_device_unregister(dev_info->pdev);
+ }
+
+ if (dev_info->exit)
+ dev_info->exit(dev_info);
+
+ debugf0("%s: Successfully deleted edac device for %s\n",
+ __func__, dev_info->ctl_name);
+ }
+}
+
+/* Convert current back-ground scrub rate into byte/sec bandwith */
+static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+ struct cpc925_mc_pdata *pdata = mci->pvt_info;
+ u32 mscr;
+ u8 si;
+
+ mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET);
+ si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT;
+
+ debugf0("%s, Mem Scrub Ctrl Register 0x%x\n", __func__, mscr);
+
+ if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
+ (si == 0)) {
+ cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
+ *bw = 0;
+ } else
+ *bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
+
+ return 0;
+}
+
+/* Return 0 for single channel; 1 for dual channel */
+static int cpc925_mc_get_channels(void __iomem *vbase)
+{
+ int dual = 0;
+ u32 mbcr;
+
+ mbcr = __raw_readl(vbase + REG_MBCR_OFFSET);
+
+ /*
+ * Dual channel only when 128-bit wide physical bus
+ * and 128-bit configuration.
+ */
+ if (((mbcr & MBCR_64BITCFG_MASK) == 0) &&
+ ((mbcr & MBCR_64BITBUS_MASK) == 0))
+ dual = 1;
+
+ debugf0("%s: %s channel\n", __func__,
+ (dual > 0) ? "Dual" : "Single");
+
+ return dual;
+}
+
+static int __devinit cpc925_probe(struct platform_device *pdev)
+{
+ static int edac_mc_idx;
+ struct mem_ctl_info *mci;
+ void __iomem *vbase;
+ struct cpc925_mc_pdata *pdata;
+ struct resource *r;
+ int res = 0, nr_channels;
+
+ debugf0("%s: %s platform device found!\n", __func__, pdev->name);
+
+ if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) {
+ res = -ENOMEM;
+ goto out;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ cpc925_printk(KERN_ERR, "Unable to get resource\n");
+ res = -ENOENT;
+ goto err1;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev,
+ r->start,
+ r->end - r->start + 1,
+ pdev->name)) {
+ cpc925_printk(KERN_ERR, "Unable to request mem region\n");
+ res = -EBUSY;
+ goto err1;
+ }
+
+ vbase = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ if (!vbase) {
+ cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
+ res = -ENOMEM;
+ goto err2;
+ }
+
+ nr_channels = cpc925_mc_get_channels(vbase);
+ mci = edac_mc_alloc(sizeof(struct cpc925_mc_pdata),
+ CPC925_NR_CSROWS, nr_channels + 1, edac_mc_idx);
+ if (!mci) {
+ cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n");
+ res = -ENOMEM;
+ goto err2;
+ }
+
+ pdata = mci->pvt_info;
+ pdata->vbase = vbase;
+ pdata->edac_idx = edac_mc_idx++;
+ pdata->name = pdev->name;
+
+ mci->dev = &pdev->dev;
+ platform_set_drvdata(pdev, mci);
+ mci->dev_name = dev_name(&pdev->dev);
+ mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->mod_name = CPC925_EDAC_MOD_STR;
+ mci->mod_ver = CPC925_EDAC_REVISION;
+ mci->ctl_name = pdev->name;
+
+ if (edac_op_state == EDAC_OPSTATE_POLL)
+ mci->edac_check = cpc925_mc_check;
+
+ mci->ctl_page_to_phys = NULL;
+ mci->scrub_mode = SCRUB_SW_SRC;
+ mci->set_sdram_scrub_rate = NULL;
+ mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate;
+
+ cpc925_init_csrows(mci);
+
+ /* Setup memory controller registers */
+ cpc925_mc_init(mci);
+
+ if (edac_mc_add_mc(mci) > 0) {
+ cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n");
+ goto err3;
+ }
+
+ cpc925_add_edac_devices(vbase);
+
+ /* get this far and it's successful */
+ debugf0("%s: success\n", __func__);
+
+ res = 0;
+ goto out;
+
+err3:
+ cpc925_mc_exit(mci);
+ edac_mc_free(mci);
+err2:
+ devm_release_mem_region(&pdev->dev, r->start, r->end-r->start+1);
+err1:
+ devres_release_group(&pdev->dev, cpc925_probe);
+out:
+ return res;
+}
+
+static int cpc925_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ /*
+ * Delete common edac devices before edac mc, because
+ * the former share the MMIO of the latter.
+ */
+ cpc925_del_edac_devices();
+ cpc925_mc_exit(mci);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static struct platform_driver cpc925_edac_driver = {
+ .probe = cpc925_probe,
+ .remove = cpc925_remove,
+ .driver = {
+ .name = "cpc925_edac",
+ }
+};
+
+static int __init cpc925_edac_init(void)
+{
+ int ret = 0;
+
+ printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n");
+ printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n");
+
+ /* Only support POLL mode so far */
+ edac_op_state = EDAC_OPSTATE_POLL;
+
+ ret = platform_driver_register(&cpc925_edac_driver);
+ if (ret) {
+ printk(KERN_WARNING "Failed to register %s\n",
+ CPC925_EDAC_MOD_STR);
+ }
+
+ return ret;
+}
+
+static void __exit cpc925_edac_exit(void)
+{
+ platform_driver_unregister(&cpc925_edac_driver);
+}
+
+module_init(cpc925_edac_init);
+module_exit(cpc925_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
+MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module");
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71..d205d493a68 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
struct pci_dev *dev = pvt->dev_d0f1;
int enable = 1;
- /* Allow module paramter override, else see if CPU supports parity */
+ /* Allow module parameter override, else see if CPU supports parity */
if (sysbus_parity != -1) {
enable = sysbus_parity;
} else if (cpu_id[0] &&
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 48d3b140983..871c13b4c14 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -150,6 +150,8 @@ enum mem_type {
MEM_FB_DDR2, /* fully buffered DDR2 */
MEM_RDDR2, /* Registered DDR2 RAM */
MEM_XDR, /* Rambus XDR */
+ MEM_DDR3, /* DDR3 RAM */
+ MEM_RDDR3, /* Registered DDR3 RAM */
};
#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
@@ -167,6 +169,8 @@ enum mem_type {
#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
#define MEM_FLAG_XDR BIT(MEM_XDR)
+#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
/* chipset Error Detection and Correction capabilities and mode */
enum edac_type {
@@ -841,6 +845,7 @@ extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
int inst_nr, int block_nr, const char *msg);
extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
int inst_nr, int block_nr, const char *msg);
+extern int edac_device_alloc_index(void);
/*
* edac_pci APIs
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index a7d2c717d03..b02a6a69a8f 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -490,6 +490,20 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
mutex_unlock(&device_ctls_mutex);
}
+/*
+ * edac_device_alloc_index: Allocate a unique device index number
+ *
+ * Return:
+ * allocated index number
+ */
+int edac_device_alloc_index(void)
+{
+ static atomic_t device_indexes = ATOMIC_INIT(0);
+
+ return atomic_inc_return(&device_indexes) - 1;
+}
+EXPORT_SYMBOL_GPL(edac_device_alloc_index);
+
/**
* edac_device_add_device: Insert the 'edac_dev' structure into the
* edac_device global list and create sysfs entries associated with
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ad218fe4942..e1d4ce08348 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -94,7 +94,9 @@ static const char *mem_types[] = {
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
- [MEM_XDR] = "XDR"
+ [MEM_XDR] = "XDR",
+ [MEM_DDR3] = "Unbuffered-DDR3",
+ [MEM_RDDR3] = "Registered-DDR3"
};
static const char *dev_types[] = {
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 7c8c2d72916..3f2ccfc6407 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
case DSC_SDTYPE_DDR2:
mtype = MEM_RDDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_RDDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
@@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
case DSC_SDTYPE_DDR2:
mtype = MEM_DDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_DDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 135b3539a03..52432ee7c4b 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -53,6 +53,7 @@
#define DSC_SDTYPE_DDR 0x02000000
#define DSC_SDTYPE_DDR2 0x03000000
+#define DSC_SDTYPE_DDR3 0x07000000
#define DSC_X32_EN 0x00000020
/* Err_Int_En */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-08 09:41:48 +0000