diff options
Diffstat (limited to 'drivers/firewire/fw-sbp2.c')
-rw-r--r-- | drivers/firewire/fw-sbp2.c | 116 |
1 files changed, 44 insertions, 72 deletions
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index aaff50ebba1..ef0b9b419c2 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -29,6 +29,7 @@ */ #include <linux/blkdev.h> +#include <linux/bug.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/dma-mapping.h> @@ -181,10 +182,16 @@ struct sbp2_target { #define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */ #define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */ #define SBP2_ORB_NULL 0x80000000 -#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 #define SBP2_RETRY_LIMIT 0xf /* 15 retries */ #define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */ +/* + * The default maximum s/g segment size of a FireWire controller is + * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to + * be quadlet-aligned, we set the length limit to 0xffff & ~3. + */ +#define SBP2_MAX_SEG_SIZE 0xfffc + /* Unit directory keys */ #define SBP2_CSR_UNIT_CHARACTERISTICS 0x3a #define SBP2_CSR_FIRMWARE_REVISION 0x3c @@ -621,25 +628,15 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id, return retval; } -static void -complete_agent_reset_write(struct fw_card *card, int rcode, - void *payload, size_t length, void *done) -{ - complete(done); -} - static void sbp2_agent_reset(struct sbp2_logical_unit *lu) { struct fw_device *device = fw_device(lu->tgt->unit->device.parent); - DECLARE_COMPLETION_ONSTACK(done); - struct fw_transaction t; - static u32 z; + __be32 d = 0; - fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST, - lu->tgt->node_id, lu->generation, device->max_speed, - lu->command_block_agent_address + SBP2_AGENT_RESET, - &z, sizeof(z), complete_agent_reset_write, &done); - wait_for_completion(&done); + fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST, + lu->tgt->node_id, lu->generation, device->max_speed, + lu->command_block_agent_address + SBP2_AGENT_RESET, + &d, sizeof(d)); } static void @@ -653,7 +650,7 @@ static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu) { struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct fw_transaction *t; - static u32 z; + static __be32 d; t = kmalloc(sizeof(*t), GFP_ATOMIC); if (t == NULL) @@ -662,7 +659,7 @@ static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu) fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST, lu->tgt->node_id, lu->generation, device->max_speed, lu->command_block_agent_address + SBP2_AGENT_RESET, - &z, sizeof(z), complete_agent_reset_write_no_wait, t); + &d, sizeof(d), complete_agent_reset_write_no_wait, t); } static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation) @@ -823,13 +820,6 @@ static void sbp2_target_put(struct sbp2_target *tgt) kref_put(&tgt->kref, sbp2_release_target); } -static void -complete_set_busy_timeout(struct fw_card *card, int rcode, - void *payload, size_t length, void *done) -{ - complete(done); -} - /* * Write retransmit retry values into the BUSY_TIMEOUT register. * - The single-phase retry protocol is supported by all SBP-2 devices, but the @@ -849,17 +839,12 @@ complete_set_busy_timeout(struct fw_card *card, int rcode, static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu) { struct fw_device *device = fw_device(lu->tgt->unit->device.parent); - DECLARE_COMPLETION_ONSTACK(done); - struct fw_transaction t; - static __be32 busy_timeout; - - busy_timeout = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT); + __be32 d = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT); - fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST, - lu->tgt->node_id, lu->generation, device->max_speed, - CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout, - sizeof(busy_timeout), complete_set_busy_timeout, &done); - wait_for_completion(&done); + fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST, + lu->tgt->node_id, lu->generation, device->max_speed, + CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, + &d, sizeof(d)); } static void sbp2_reconnect(struct work_struct *work); @@ -1121,6 +1106,10 @@ static int sbp2_probe(struct device *dev) struct Scsi_Host *shost; u32 model, firmware_revision; + if (dma_get_max_seg_size(device->card->device) > SBP2_MAX_SEG_SIZE) + BUG_ON(dma_set_max_seg_size(device->card->device, + SBP2_MAX_SEG_SIZE)); + shost = scsi_host_alloc(&scsi_driver_template, sizeof(*tgt)); if (shost == NULL) return -ENOMEM; @@ -1369,14 +1358,12 @@ static int sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device, struct sbp2_logical_unit *lu) { - struct scatterlist *sg; - int sg_len, l, i, j, count; - dma_addr_t sg_addr; - - sg = scsi_sglist(orb->cmd); - count = dma_map_sg(device->card->device, sg, scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - if (count == 0) + struct scatterlist *sg = scsi_sglist(orb->cmd); + int i, n; + + n = dma_map_sg(device->card->device, sg, scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + if (n == 0) goto fail; /* @@ -1386,7 +1373,7 @@ sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device, * as the second generation iPod which doesn't support page * tables. */ - if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) { + if (n == 1) { orb->request.data_descriptor.high = cpu_to_be32(lu->tgt->address_high); orb->request.data_descriptor.low = @@ -1396,29 +1383,9 @@ sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device, return 0; } - /* - * Convert the scatterlist to an sbp2 page table. If any - * scatterlist entries are too big for sbp2, we split them as we - * go. Even if we ask the block I/O layer to not give us sg - * elements larger than 65535 bytes, some IOMMUs may merge sg elements - * during DMA mapping, and Linux currently doesn't prevent this. - */ - for (i = 0, j = 0; i < count; i++, sg = sg_next(sg)) { - sg_len = sg_dma_len(sg); - sg_addr = sg_dma_address(sg); - while (sg_len) { - /* FIXME: This won't get us out of the pinch. */ - if (unlikely(j >= ARRAY_SIZE(orb->page_table))) { - fw_error("page table overflow\n"); - goto fail_page_table; - } - l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH); - orb->page_table[j].low = cpu_to_be32(sg_addr); - orb->page_table[j].high = cpu_to_be32(l << 16); - sg_addr += l; - sg_len -= l; - j++; - } + for_each_sg(sg, sg, n, i) { + orb->page_table[i].high = cpu_to_be32(sg_dma_len(sg) << 16); + orb->page_table[i].low = cpu_to_be32(sg_dma_address(sg)); } orb->page_table_bus = @@ -1437,13 +1404,13 @@ sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device, orb->request.data_descriptor.high = cpu_to_be32(lu->tgt->address_high); orb->request.data_descriptor.low = cpu_to_be32(orb->page_table_bus); orb->request.misc |= cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT | - COMMAND_ORB_DATA_SIZE(j)); + COMMAND_ORB_DATA_SIZE(n)); return 0; fail_page_table: - dma_unmap_sg(device->card->device, sg, scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); + dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), orb->cmd->sc_data_direction); fail: return -ENOMEM; } @@ -1456,7 +1423,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; unsigned int max_payload; - int retval = SCSI_MLQUEUE_HOST_BUSY; + int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* * Bidirectional commands are not yet implemented, and unknown @@ -1500,6 +1467,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) if (cmd->sc_data_direction == DMA_FROM_DEVICE) orb->request.misc |= cpu_to_be32(COMMAND_ORB_DIRECTION); + generation = device->generation; + smp_rmb(); /* sbp2_map_scatterlist looks at tgt->address_high */ + if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0) goto out; @@ -1512,7 +1482,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) if (dma_mapping_error(device->card->device, orb->base.request_bus)) goto out; - sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, lu->generation, + sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); retval = 0; out: @@ -1564,6 +1534,8 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS) blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512); + blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE); + return 0; } |