summaryrefslogtreecommitdiffstats
path: root/drivers/firewire/ohci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/firewire/ohci.c')
-rw-r--r--drivers/firewire/ohci.c21
1 files changed, 14 insertions, 7 deletions
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 96768e16086..43ebf337b13 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2101,11 +2101,6 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base,
u32 payload_index, payload_end_index, next_page_index;
int page, end_page, i, length, offset;
- /*
- * FIXME: Cycle lost behavior should be configurable: lose
- * packet, retransmit or terminate..
- */
-
p = packet;
payload_index = payload;
@@ -2135,6 +2130,14 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base,
if (!p->skip) {
d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
d[0].req_count = cpu_to_le16(8);
+ /*
+ * Link the skip address to this descriptor itself. This causes
+ * a context to skip a cycle whenever lost cycles or FIFO
+ * overruns occur, without dropping the data. The application
+ * should then decide whether this is an error condition or not.
+ * FIXME: Make the context's cycle-lost behaviour configurable?
+ */
+ d[0].branch_address = cpu_to_le32(d_bus | z);
header = (__le32 *) &d[1];
header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
@@ -2226,7 +2229,6 @@ static int ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base,
if (rest == 0)
return -EINVAL;
- /* FIXME: make packet-per-buffer/dual-buffer a context option */
while (rest > 0) {
d = context_get_descriptors(&ctx->context,
z + header_z, &d_bus);
@@ -2421,6 +2423,7 @@ static void ohci_pmac_off(struct pci_dev *dev)
#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
@@ -2470,7 +2473,10 @@ static int __devinit pci_probe(struct pci_dev *dev,
}
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+#if 0
+ /* FIXME: make it a context option or remove dual-buffer mode */
ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+#endif
/* dual-buffer mode is broken if more than one IR context is active */
if (dev->vendor == PCI_VENDOR_ID_AGERE &&
@@ -2486,7 +2492,8 @@ static int __devinit pci_probe(struct pci_dev *dev,
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
if (dev->vendor == PCI_VENDOR_ID_TI &&
- dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+ (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 ||
+ dev->device == PCI_DEVICE_ID_TI_TSB43AB23))
ohci->use_dualbuffer = false;
#endif