diff options
Diffstat (limited to 'drivers/gpio/gpio-mcp23s08.c')
| -rw-r--r-- | drivers/gpio/gpio-mcp23s08.c | 723 |
1 files changed, 723 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c new file mode 100644 index 00000000000..1ef46e6c2a2 --- /dev/null +++ b/drivers/gpio/gpio-mcp23s08.c @@ -0,0 +1,723 @@ +/* + * MCP23S08 SPI/GPIO gpio expander driver + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/spi/mcp23s08.h> +#include <linux/slab.h> +#include <asm/byteorder.h> + +/** + * MCP types supported by driver + */ +#define MCP_TYPE_S08 0 +#define MCP_TYPE_S17 1 +#define MCP_TYPE_008 2 +#define MCP_TYPE_017 3 + +/* Registers are all 8 bits wide. + * + * The mcp23s17 has twice as many bits, and can be configured to work + * with either 16 bit registers or with two adjacent 8 bit banks. + */ +#define MCP_IODIR 0x00 /* init/reset: all ones */ +#define MCP_IPOL 0x01 +#define MCP_GPINTEN 0x02 +#define MCP_DEFVAL 0x03 +#define MCP_INTCON 0x04 +#define MCP_IOCON 0x05 +# define IOCON_SEQOP (1 << 5) +# define IOCON_HAEN (1 << 3) +# define IOCON_ODR (1 << 2) +# define IOCON_INTPOL (1 << 1) +#define MCP_GPPU 0x06 +#define MCP_INTF 0x07 +#define MCP_INTCAP 0x08 +#define MCP_GPIO 0x09 +#define MCP_OLAT 0x0a + +struct mcp23s08; + +struct mcp23s08_ops { + int (*read)(struct mcp23s08 *mcp, unsigned reg); + int (*write)(struct mcp23s08 *mcp, unsigned reg, unsigned val); + int (*read_regs)(struct mcp23s08 *mcp, unsigned reg, + u16 *vals, unsigned n); +}; + +struct mcp23s08 { + u8 addr; + + u16 cache[11]; + /* lock protects the cached values */ + struct mutex lock; + + struct gpio_chip chip; + + const struct mcp23s08_ops *ops; + void *data; /* ops specific data */ +}; + +/* A given spi_device can represent up to eight mcp23sxx chips + * sharing the same chipselect but using different addresses + * (e.g. chips #0 and #3 might be populated, but not #1 or $2). + * Driver data holds all the per-chip data. + */ +struct mcp23s08_driver_data { + unsigned ngpio; + struct mcp23s08 *mcp[8]; + struct mcp23s08 chip[]; +}; + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_I2C + +static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg) +{ + return i2c_smbus_read_byte_data(mcp->data, reg); +} + +static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + return i2c_smbus_write_byte_data(mcp->data, reg, val); +} + +static int +mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + while (n--) { + int ret = mcp23008_read(mcp, reg++); + if (ret < 0) + return ret; + *vals++ = ret; + } + + return 0; +} + +static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg) +{ + return i2c_smbus_read_word_data(mcp->data, reg << 1); +} + +static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + return i2c_smbus_write_word_data(mcp->data, reg << 1, val); +} + +static int +mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + while (n--) { + int ret = mcp23017_read(mcp, reg++); + if (ret < 0) + return ret; + *vals++ = ret; + } + + return 0; +} + +static const struct mcp23s08_ops mcp23008_ops = { + .read = mcp23008_read, + .write = mcp23008_write, + .read_regs = mcp23008_read_regs, +}; + +static const struct mcp23s08_ops mcp23017_ops = { + .read = mcp23017_read, + .write = mcp23017_write, + .read_regs = mcp23017_read_regs, +}; + +#endif /* CONFIG_I2C */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SPI_MASTER + +static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg) +{ + u8 tx[2], rx[1]; + int status; + + tx[0] = mcp->addr | 0x01; + tx[1] = reg; + status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); + return (status < 0) ? status : rx[0]; +} + +static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + u8 tx[3]; + + tx[0] = mcp->addr; + tx[1] = reg; + tx[2] = val; + return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); +} + +static int +mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + u8 tx[2], *tmp; + int status; + + if ((n + reg) > sizeof mcp->cache) + return -EINVAL; + tx[0] = mcp->addr | 0x01; + tx[1] = reg; + + tmp = (u8 *)vals; + status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n); + if (status >= 0) { + while (n--) + vals[n] = tmp[n]; /* expand to 16bit */ + } + return status; +} + +static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg) +{ + u8 tx[2], rx[2]; + int status; + + tx[0] = mcp->addr | 0x01; + tx[1] = reg << 1; + status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); + return (status < 0) ? status : (rx[0] | (rx[1] << 8)); +} + +static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + u8 tx[4]; + + tx[0] = mcp->addr; + tx[1] = reg << 1; + tx[2] = val; + tx[3] = val >> 8; + return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); +} + +static int +mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + u8 tx[2]; + int status; + + if ((n + reg) > sizeof mcp->cache) + return -EINVAL; + tx[0] = mcp->addr | 0x01; + tx[1] = reg << 1; + + status = spi_write_then_read(mcp->data, tx, sizeof tx, + (u8 *)vals, n * 2); + if (status >= 0) { + while (n--) + vals[n] = __le16_to_cpu((__le16)vals[n]); + } + + return status; +} + +static const struct mcp23s08_ops mcp23s08_ops = { + .read = mcp23s08_read, + .write = mcp23s08_write, + .read_regs = mcp23s08_read_regs, +}; + +static const struct mcp23s08_ops mcp23s17_ops = { + .read = mcp23s17_read, + .write = mcp23s17_write, + .read_regs = mcp23s17_read_regs, +}; + +#endif /* CONFIG_SPI_MASTER */ + +/*----------------------------------------------------------------------*/ + +static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip); + int status; + + mutex_lock(&mcp->lock); + mcp->cache[MCP_IODIR] |= (1 << offset); + status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]); + mutex_unlock(&mcp->lock); + return status; +} + +static int mcp23s08_get(struct gpio_chip *chip, unsigned offset) +{ + struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip); + int status; + + mutex_lock(&mcp->lock); + + /* REVISIT reading this clears any IRQ ... */ + status = mcp->ops->read(mcp, MCP_GPIO); + if (status < 0) + status = 0; + else { + mcp->cache[MCP_GPIO] = status; + status = !!(status & (1 << offset)); + } + mutex_unlock(&mcp->lock); + return status; +} + +static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, int value) +{ + unsigned olat = mcp->cache[MCP_OLAT]; + + if (value) + olat |= mask; + else + olat &= ~mask; + mcp->cache[MCP_OLAT] = olat; + return mcp->ops->write(mcp, MCP_OLAT, olat); +} + +static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip); + unsigned mask = 1 << offset; + + mutex_lock(&mcp->lock); + __mcp23s08_set(mcp, mask, value); + mutex_unlock(&mcp->lock); +} + +static int +mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip); + unsigned mask = 1 << offset; + int status; + + mutex_lock(&mcp->lock); + status = __mcp23s08_set(mcp, mask, value); + if (status == 0) { + mcp->cache[MCP_IODIR] &= ~mask; + status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]); + } + mutex_unlock(&mcp->lock); + return status; +} + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_DEBUG_FS + +#include <linux/seq_file.h> + +/* + * This shows more info than the generic gpio dump code: + * pullups, deglitching, open drain drive. + */ +static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct mcp23s08 *mcp; + char bank; + int t; + unsigned mask; + + mcp = container_of(chip, struct mcp23s08, chip); + + /* NOTE: we only handle one bank for now ... */ + bank = '0' + ((mcp->addr >> 1) & 0x7); + + mutex_lock(&mcp->lock); + t = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache)); + if (t < 0) { + seq_printf(s, " I/O ERROR %d\n", t); + goto done; + } + + for (t = 0, mask = 1; t < chip->ngpio; t++, mask <<= 1) { + const char *label; + + label = gpiochip_is_requested(chip, t); + if (!label) + continue; + + seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s", + chip->base + t, bank, t, label, + (mcp->cache[MCP_IODIR] & mask) ? "in " : "out", + (mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo", + (mcp->cache[MCP_GPPU] & mask) ? " " : "up"); + /* NOTE: ignoring the irq-related registers */ + seq_printf(s, "\n"); + } +done: + mutex_unlock(&mcp->lock); +} + +#else +#define mcp23s08_dbg_show NULL +#endif + +/*----------------------------------------------------------------------*/ + +static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, + void *data, unsigned addr, + unsigned type, unsigned base, unsigned pullups) +{ + int status; + + mutex_init(&mcp->lock); + + mcp->data = data; + mcp->addr = addr; + + mcp->chip.direction_input = mcp23s08_direction_input; + mcp->chip.get = mcp23s08_get; + mcp->chip.direction_output = mcp23s08_direction_output; + mcp->chip.set = mcp23s08_set; + mcp->chip.dbg_show = mcp23s08_dbg_show; + + switch (type) { +#ifdef CONFIG_SPI_MASTER + case MCP_TYPE_S08: + mcp->ops = &mcp23s08_ops; + mcp->chip.ngpio = 8; + mcp->chip.label = "mcp23s08"; + break; + + case MCP_TYPE_S17: + mcp->ops = &mcp23s17_ops; + mcp->chip.ngpio = 16; + mcp->chip.label = "mcp23s17"; + break; +#endif /* CONFIG_SPI_MASTER */ + +#ifdef CONFIG_I2C + case MCP_TYPE_008: + mcp->ops = &mcp23008_ops; + mcp->chip.ngpio = 8; + mcp->chip.label = "mcp23008"; + break; + + case MCP_TYPE_017: + mcp->ops = &mcp23017_ops; + mcp->chip.ngpio = 16; + mcp->chip.label = "mcp23017"; + break; +#endif /* CONFIG_I2C */ + + default: + dev_err(dev, "invalid device type (%d)\n", type); + return -EINVAL; + } + + mcp->chip.base = base; + mcp->chip.can_sleep = 1; + mcp->chip.dev = dev; + mcp->chip.owner = THIS_MODULE; + + /* verify MCP_IOCON.SEQOP = 0, so sequential reads work, + * and MCP_IOCON.HAEN = 1, so we work with all chips. + */ + status = mcp->ops->read(mcp, MCP_IOCON); + if (status < 0) + goto fail; + if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) { + /* mcp23s17 has IOCON twice, make sure they are in sync */ + status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8)); + status |= IOCON_HAEN | (IOCON_HAEN << 8); + status = mcp->ops->write(mcp, MCP_IOCON, status); + if (status < 0) + goto fail; + } + + /* configure ~100K pullups */ + status = mcp->ops->write(mcp, MCP_GPPU, pullups); + if (status < 0) + goto fail; + + status = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache)); + if (status < 0) + goto fail; + + /* disable inverter on input */ + if (mcp->cache[MCP_IPOL] != 0) { + mcp->cache[MCP_IPOL] = 0; + status = mcp->ops->write(mcp, MCP_IPOL, 0); + if (status < 0) + goto fail; + } + + /* disable irqs */ + if (mcp->cache[MCP_GPINTEN] != 0) { + mcp->cache[MCP_GPINTEN] = 0; + status = mcp->ops->write(mcp, MCP_GPINTEN, 0); + if (status < 0) + goto fail; + } + + status = gpiochip_add(&mcp->chip); +fail: + if (status < 0) + dev_dbg(dev, "can't setup chip %d, --> %d\n", + addr, status); + return status; +} + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_I2C + +static int __devinit mcp230xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcp23s08_platform_data *pdata; + struct mcp23s08 *mcp; + int status; + + pdata = client->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&client->dev, "invalid or missing platform data\n"); + return -EINVAL; + } + + mcp = kzalloc(sizeof *mcp, GFP_KERNEL); + if (!mcp) + return -ENOMEM; + + status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, + id->driver_data, pdata->base, + pdata->chip[0].pullups); + if (status) + goto fail; + + i2c_set_clientdata(client, mcp); + + return 0; + +fail: + kfree(mcp); + + return status; +} + +static int __devexit mcp230xx_remove(struct i2c_client *client) +{ + struct mcp23s08 *mcp = i2c_get_clientdata(client); + int status; + + status = gpiochip_remove(&mcp->chip); + if (status == 0) + kfree(mcp); + + return status; +} + +static const struct i2c_device_id mcp230xx_id[] = { + { "mcp23008", MCP_TYPE_008 }, + { "mcp23017", MCP_TYPE_017 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mcp230xx_id); + +static struct i2c_driver mcp230xx_driver = { + .driver = { + .name = "mcp230xx", + .owner = THIS_MODULE, + }, + .probe = mcp230xx_probe, + .remove = __devexit_p(mcp230xx_remove), + .id_table = mcp230xx_id, +}; + +static int __init mcp23s08_i2c_init(void) +{ + return i2c_add_driver(&mcp230xx_driver); +} + +static void mcp23s08_i2c_exit(void) +{ + i2c_del_driver(&mcp230xx_driver); +} + +#else + +static int __init mcp23s08_i2c_init(void) { return 0; } +static void mcp23s08_i2c_exit(void) { } + +#endif /* CONFIG_I2C */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SPI_MASTER + +static int mcp23s08_probe(struct spi_device *spi) +{ + struct mcp23s08_platform_data *pdata; + unsigned addr; + unsigned chips = 0; + struct mcp23s08_driver_data *data; + int status, type; + unsigned base; + + type = spi_get_device_id(spi)->driver_data; + + pdata = spi->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&spi->dev, "invalid or missing platform data\n"); + return -EINVAL; + } + + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { + if (!pdata->chip[addr].is_present) + continue; + chips++; + if ((type == MCP_TYPE_S08) && (addr > 3)) { + dev_err(&spi->dev, + "mcp23s08 only supports address 0..3\n"); + return -EINVAL; + } + } + if (!chips) + return -ENODEV; + + data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08), + GFP_KERNEL); + if (!data) + return -ENOMEM; + spi_set_drvdata(spi, data); + + base = pdata->base; + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { + if (!pdata->chip[addr].is_present) + continue; + chips--; + data->mcp[addr] = &data->chip[chips]; + status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, + 0x40 | (addr << 1), type, base, + pdata->chip[addr].pullups); + if (status < 0) + goto fail; + + base += (type == MCP_TYPE_S17) ? 16 : 8; + } + data->ngpio = base - pdata->base; + + /* NOTE: these chips have a relatively sane IRQ framework, with + * per-signal masking and level/edge triggering. It's not yet + * handled here... + */ + + return 0; + +fail: + for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) { + int tmp; + + if (!data->mcp[addr]) + continue; + tmp = gpiochip_remove(&data->mcp[addr]->chip); + if (tmp < 0) + dev_err(&spi->dev, "%s --> %d\n", "remove", tmp); + } + kfree(data); + return status; +} + +static int mcp23s08_remove(struct spi_device *spi) +{ + struct mcp23s08_driver_data *data = spi_get_drvdata(spi); + unsigned addr; + int status = 0; + + for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) { + int tmp; + + if (!data->mcp[addr]) + continue; + + tmp = gpiochip_remove(&data->mcp[addr]->chip); + if (tmp < 0) { + dev_err(&spi->dev, "%s --> %d\n", "remove", tmp); + status = tmp; + } + } + if (status == 0) + kfree(data); + return status; +} + +static const struct spi_device_id mcp23s08_ids[] = { + { "mcp23s08", MCP_TYPE_S08 }, + { "mcp23s17", MCP_TYPE_S17 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, mcp23s08_ids); + +static struct spi_driver mcp23s08_driver = { + .probe = mcp23s08_probe, + .remove = mcp23s08_remove, + .id_table = mcp23s08_ids, + .driver = { + .name = "mcp23s08", + .owner = THIS_MODULE, + }, +}; + +static int __init mcp23s08_spi_init(void) +{ + return spi_register_driver(&mcp23s08_driver); +} + +static void mcp23s08_spi_exit(void) +{ + spi_unregister_driver(&mcp23s08_driver); +} + +#else + +static int __init mcp23s08_spi_init(void) { return 0; } +static void mcp23s08_spi_exit(void) { } + +#endif /* CONFIG_SPI_MASTER */ + +/*----------------------------------------------------------------------*/ + +static int __init mcp23s08_init(void) +{ + int ret; + + ret = mcp23s08_spi_init(); + if (ret) + goto spi_fail; + + ret = mcp23s08_i2c_init(); + if (ret) + goto i2c_fail; + + return 0; + + i2c_fail: + mcp23s08_spi_exit(); + spi_fail: + return ret; +} +/* register after spi/i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(mcp23s08_init); + +static void __exit mcp23s08_exit(void) +{ + mcp23s08_spi_exit(); + mcp23s08_i2c_exit(); +} +module_exit(mcp23s08_exit); + +MODULE_LICENSE("GPL"); |