diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/gpio-mxc.c | 125 |
1 files changed, 107 insertions, 18 deletions
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 71ba316854c..3775dccef4a 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -27,9 +27,29 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/basic_mmio_gpio.h> -#include <mach/hardware.h> #include <asm-generic/bug.h> +enum mxc_gpio_hwtype { + IMX1_GPIO, /* runs on i.mx1 */ + IMX21_GPIO, /* runs on i.mx21 and i.mx27 */ + IMX31_GPIO, /* runs on all other i.mx */ +}; + +/* device type dependent stuff */ +struct mxc_gpio_hwdata { + unsigned dr_reg; + unsigned gdir_reg; + unsigned psr_reg; + unsigned icr1_reg; + unsigned icr2_reg; + unsigned imr_reg; + unsigned isr_reg; + unsigned low_level; + unsigned high_level; + unsigned rise_edge; + unsigned fall_edge; +}; + struct mxc_gpio_port { struct list_head node; void __iomem *base; @@ -40,6 +60,66 @@ struct mxc_gpio_port { u32 both_edges; }; +static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { + .dr_reg = 0x1c, + .gdir_reg = 0x00, + .psr_reg = 0x24, + .icr1_reg = 0x28, + .icr2_reg = 0x2c, + .imr_reg = 0x30, + .isr_reg = 0x34, + .low_level = 0x03, + .high_level = 0x02, + .rise_edge = 0x00, + .fall_edge = 0x01, +}; + +static struct mxc_gpio_hwdata imx31_gpio_hwdata = { + .dr_reg = 0x00, + .gdir_reg = 0x04, + .psr_reg = 0x08, + .icr1_reg = 0x0c, + .icr2_reg = 0x10, + .imr_reg = 0x14, + .isr_reg = 0x18, + .low_level = 0x00, + .high_level = 0x01, + .rise_edge = 0x02, + .fall_edge = 0x03, +}; + +static enum mxc_gpio_hwtype mxc_gpio_hwtype; +static struct mxc_gpio_hwdata *mxc_gpio_hwdata; + +#define GPIO_DR (mxc_gpio_hwdata->dr_reg) +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg) +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg) +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg) + +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) +#define GPIO_INT_NONE 0x4 + +static struct platform_device_id mxc_gpio_devtype[] = { + { + .name = "imx1-gpio", + .driver_data = IMX1_GPIO, + }, { + .name = "imx21-gpio", + .driver_data = IMX21_GPIO, + }, { + .name = "imx31-gpio", + .driver_data = IMX31_GPIO, + }, { + /* sentinel */ + } +}; + /* * MX2 has one interrupt *for all* gpio ports. The list is used * to save the references to all ports, so that mx2_gpio_irq_handler @@ -47,22 +127,6 @@ struct mxc_gpio_port { */ static LIST_HEAD(mxc_gpio_ports); -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - /* Note: This driver assumes 32 GPIOs are handled in one register */ static int gpio_set_irq_type(struct irq_data *d, u32 type) @@ -236,12 +300,36 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) IRQ_NOREQUEST, 0); } +static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) +{ + enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data; + + if (mxc_gpio_hwtype) { + /* + * The driver works with a reasonable presupposition, + * that is all gpio ports must be the same type when + * running on one soc. + */ + BUG_ON(mxc_gpio_hwtype != hwtype); + return; + } + + if (hwtype == IMX31_GPIO) + mxc_gpio_hwdata = &imx31_gpio_hwdata; + else + mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata; + + mxc_gpio_hwtype = hwtype; +} + static int __devinit mxc_gpio_probe(struct platform_device *pdev) { struct mxc_gpio_port *port; struct resource *iores; int err; + mxc_gpio_get_hw(pdev); + port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL); if (!port) return -ENOMEM; @@ -280,7 +368,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) /* gpio-mxc can be a generic irq chip */ mxc_gpio_init_gc(port); - if (cpu_is_mx2()) { + if (mxc_gpio_hwtype == IMX21_GPIO) { /* setup one handler for all GPIO interrupts */ if (pdev->id == 0) irq_set_chained_handler(port->irq, @@ -334,6 +422,7 @@ static struct platform_driver mxc_gpio_driver = { .owner = THIS_MODULE, }, .probe = mxc_gpio_probe, + .id_table = mxc_gpio_devtype, }; static int __init gpio_mxc_init(void) |