diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/oaktrail_device.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_device.c | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c new file mode 100644 index 00000000000..63aea2f010d --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -0,0 +1,512 @@ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/dmi.h> +#include <drm/drmP.h> +#include <drm/drm.h> +#include "gma_drm.h" +#include "psb_drv.h" +#include "psb_reg.h" +#include "psb_intel_reg.h" +#include <asm/mrst.h> +#include <asm/intel_scu_ipc.h> +#include "mid_bios.h" +#include "intel_bios.h" + +static int oaktrail_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + if (dev_priv->iLVDS_enable) + oaktrail_lvds_init(dev, &dev_priv->mode_dev); + else + dev_err(dev->dev, "DSI is not supported\n"); + if (dev_priv->hdmi_priv) + oaktrail_hdmi_init(dev, &dev_priv->mode_dev); + return 0; +} + +/* + * Provide the low level interfaces for the Moorestown backlight + */ + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 +#define BLC_ADJUSTMENT_MAX 100 + +static struct backlight_device *oaktrail_backlight_device; +static int oaktrail_brightness; + +static int oaktrail_set_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(oaktrail_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + int level = bd->props.brightness; + u32 blc_pwm_ctl; + u32 max_pwm_blc; + + /* Percentage 1-100% being valid */ + if (level < 1) + level = 1; + + if (gma_power_begin(dev, 0)) { + /* Calculate and set the brightness value */ + max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16; + blc_pwm_ctl = level * max_pwm_blc / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj1; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj2; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* force PWM bit on */ + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl); + gma_power_end(dev); + } + oaktrail_brightness = level; + return 0; +} + +static int oaktrail_get_brightness(struct backlight_device *bd) +{ + /* return locally cached var instead of HW read (due to DPST etc.) */ + /* FIXME: ideally return actual value in case firmware fiddled with + it */ + return oaktrail_brightness; +} + +static int device_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + unsigned long core_clock; + u16 bl_max_freq; + uint32_t value; + uint32_t blc_pwm_precision_factor; + + dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; + dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; + bl_max_freq = 256; + /* this needs to be set elsewhere */ + blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR; + + core_clock = dev_priv->core_freq; + + value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; + value *= blc_pwm_precision_factor; + value /= bl_max_freq; + value /= blc_pwm_precision_factor; + + if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ) + return -ERANGE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, value | (value << 16)); + gma_power_end(dev); + } + return 0; +} + +static const struct backlight_ops oaktrail_ops = { + .get_brightness = oaktrail_get_brightness, + .update_status = oaktrail_set_brightness, +}; + +int oaktrail_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + int ret; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 100; + props.type = BACKLIGHT_PLATFORM; + + oaktrail_backlight_device = backlight_device_register("oaktrail-bl", + NULL, (void *)dev, &oaktrail_ops, &props); + + if (IS_ERR(oaktrail_backlight_device)) + return PTR_ERR(oaktrail_backlight_device); + + ret = device_backlight_init(dev); + if (ret < 0) { + backlight_device_unregister(oaktrail_backlight_device); + return ret; + } + oaktrail_backlight_device->props.brightness = 100; + oaktrail_backlight_device->props.max_brightness = 100; + backlight_update_status(oaktrail_backlight_device); + dev_priv->backlight_device = oaktrail_backlight_device; + return 0; +} + +#endif + +/* + * Provide the Moorestown specific chip logic and low level methods + * for power management + */ + +static void oaktrail_init_pm(struct drm_device *dev) +{ +} + +/** + * oaktrail_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int oaktrail_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + int i; + u32 pp_stat; + + /* Display arbitration control + watermarks */ + dev_priv->saveDSPARB = PSB_RVDC32(DSPARB); + dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1); + dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2); + dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3); + dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4); + dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5); + dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6); + dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); + + /* Pipe & plane A info */ + dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF); + dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC); + dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0); + dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1); + dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A); + dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A); + dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A); + dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A); + dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A); + dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A); + dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A); + dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A); + dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR); + dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE); + dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE); + dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF); + dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF); + dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF); + + /* Save cursor regs */ + dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); + dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); + dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); + + /* Save palette (gamma) */ + for (i = 0; i < 256; i++) + dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_save(dev); + + /* Save performance state */ + dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE); + + /* LVDS state */ + dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); + dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS); + dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL); + dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2); + dev_priv->saveLVDS = PSB_RVDC32(LVDS); + dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); + dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON); + dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF); + dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE); + + /* HW overlay */ + dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD); + dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); + dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); + dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); + dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); + dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); + dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); + + /* DPST registers */ + dev_priv->saveHISTOGRAM_INT_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_INT_CONTROL); + dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); + dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC); + + if (dev_priv->iLVDS_enable) { + /* Shut down the panel */ + PSB_WVDC32(0, PP_CONTROL); + + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x80000000); + + /* Turn off the plane */ + PSB_WVDC32(0x58000000, DSPACNTR); + /* Trigger the plane disable */ + PSB_WVDC32(0, DSPASURF); + + /* Wait ~4 ticks */ + msleep(4); + + /* Turn off pipe */ + PSB_WVDC32(0x0, PIPEACONF); + /* Wait ~8 ticks */ + msleep(8); + + /* Turn off PLLs */ + PSB_WVDC32(0, MRST_DPLL_A); + } + return 0; +} + +/** + * oaktrail_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + */ +static int oaktrail_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pp_stat; + int i; + + /* Display arbitration + watermarks */ + PSB_WVDC32(dev_priv->saveDSPARB, DSPARB); + PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1); + PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2); + PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3); + PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4); + PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5); + PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6); + PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT); + + /* Make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + /* set the plls */ + PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0); + PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1); + + /* Actually enable it */ + PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A); + DRM_UDELAY(150); + + /* Restore mode */ + PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A); + PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A); + PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A); + PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A); + PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A); + PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A); + PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC); + PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A); + + /* Restore performance mode*/ + PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE); + + /* Enable the pipe*/ + if (dev_priv->iLVDS_enable) + PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF); + + /* Set up the plane*/ + PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF); + PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE); + PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF); + + /* Enable the plane */ + PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR); + PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF); + + /* Enable Cursor A */ + PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR); + PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS); + PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE); + + /* Restore palette (gamma) */ + for (i = 0; i < 256; i++) + PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_restore(dev); + + if (dev_priv->iLVDS_enable) { + PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2); + PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/ + PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL); + PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); + PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS); + PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL); + PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON); + PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF); + PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE); + PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL); + } + + /* Wait for cycle delay */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x08000000); + + /* Wait for panel power up */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x10000000); + + /* Restore HW overlay */ + PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD); + PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0); + PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1); + PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2); + PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3); + PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4); + PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5); + + /* DPST registers */ + PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG, + HISTOGRAM_INT_CONTROL); + PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG, + HISTOGRAM_LOGIC_CONTROL); + PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC); + + return 0; +} + +/** + * oaktrail_power_down - power down the display island + * @dev: our DRM device + * + * Power down the display interface of our device + */ +static int oaktrail_power_down(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_mask ; + u32 pwr_sts; + + pwr_mask = PSB_PWRGT_DISPLAY_MASK; + outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == pwr_mask) + break; + else + udelay(10); + } + return 0; +} + +/* + * oaktrail_power_up + * + * Restore power to the specified island(s) (powergating) + */ +static int oaktrail_power_up(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK; + u32 pwr_sts, pwr_cnt; + + pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); + pwr_cnt &= ~pwr_mask; + outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC)); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == 0) + break; + else + udelay(10); + } + return 0; +} + + +static int oaktrail_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_vbt *vbt = &dev_priv->vbt_data; + int ret; + + ret = mid_chip_setup(dev); + if (ret < 0) + return ret; + if (vbt->size == 0) { + /* Now pull the BIOS data */ + gma_intel_opregion_init(dev); + psb_intel_init_bios(dev); + } + return 0; +} + +static void oaktrail_teardown(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_vbt *vbt = &dev_priv->vbt_data; + + oaktrail_hdmi_teardown(dev); + if (vbt->size == 0) + psb_intel_destroy_bios(dev); +} + +const struct psb_ops oaktrail_chip_ops = { + .name = "Oaktrail", + .accel_2d = 1, + .pipes = 2, + .crtcs = 2, + .sgx_offset = MRST_SGX_OFFSET, + + .chip_setup = oaktrail_chip_setup, + .chip_teardown = oaktrail_teardown, + .crtc_helper = &oaktrail_helper_funcs, + .crtc_funcs = &psb_intel_crtc_funcs, + + .output_init = oaktrail_output_init, + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + .backlight_init = oaktrail_backlight_init, +#endif + + .init_pm = oaktrail_init_pm, + .save_regs = oaktrail_save_display_registers, + .restore_regs = oaktrail_restore_display_registers, + .power_down = oaktrail_power_down, + .power_up = oaktrail_power_up, + + .i2c_bus = 1, +}; |