diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_drv.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.c | 143 |
1 files changed, 138 insertions, 5 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index fc4b68aa2d0..7f436ec075f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -37,12 +37,15 @@ #include <linux/console.h> #include "drm_crtc_helper.h" -static unsigned int i915_modeset = -1; +static int i915_modeset = -1; module_param_named(modeset, i915_modeset, int, 0400); unsigned int i915_fbpercrtc = 0; module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); +unsigned int i915_powersave = 1; +module_param_named(powersave, i915_powersave, int, 0400); + static struct drm_driver driver; static struct pci_device_id pciidlist[] = { @@ -86,6 +89,9 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_set_power_state(dev->pdev, PCI_D3hot); } + /* Modeset on resume, not lid events */ + dev_priv->modeset_on_lid = 0; + return 0; } @@ -94,8 +100,6 @@ static int i915_resume(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int ret = 0; - pci_set_power_state(dev->pdev, PCI_D0); - pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) return -1; pci_set_master(dev->pdev); @@ -121,9 +125,135 @@ static int i915_resume(struct drm_device *dev) drm_helper_resume_force_mode(dev); } + dev_priv->modeset_on_lid = 0; + return ret; } +/** + * i965_reset - reset chip after a hang + * @dev: drm device to reset + * @flags: reset domains + * + * Reset the chip. Useful if a hang is detected. Returns zero on successful + * reset or otherwise an error code. + * + * Procedure is fairly simple: + * - reset the chip using the reset reg + * - re-init context state + * - re-init hardware status page + * - re-init ring buffer + * - re-init interrupt state + * - re-init display + */ +int i965_reset(struct drm_device *dev, u8 flags) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + unsigned long timeout; + u8 gdrst; + /* + * We really should only reset the display subsystem if we actually + * need to + */ + bool need_display = true; + + mutex_lock(&dev->struct_mutex); + + /* + * Clear request list + */ + i915_gem_retire_requests(dev); + + if (need_display) + i915_save_display(dev); + + if (IS_I965G(dev) || IS_G4X(dev)) { + /* + * Set the domains we want to reset, then the reset bit (bit 0). + * Clear the reset bit after a while and wait for hardware status + * bit (bit 1) to be set + */ + pci_read_config_byte(dev->pdev, GDRST, &gdrst); + pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0)); + udelay(50); + pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe); + + /* ...we don't want to loop forever though, 500ms should be plenty */ + timeout = jiffies + msecs_to_jiffies(500); + do { + udelay(100); + pci_read_config_byte(dev->pdev, GDRST, &gdrst); + } while ((gdrst & 0x1) && time_after(timeout, jiffies)); + + if (gdrst & 0x1) { + WARN(true, "i915: Failed to reset chip\n"); + mutex_unlock(&dev->struct_mutex); + return -EIO; + } + } else { + DRM_ERROR("Error occurred. Don't know how to reset this chip.\n"); + return -ENODEV; + } + + /* Ok, now get things going again... */ + + /* + * Everything depends on having the GTT running, so we need to start + * there. Fortunately we don't need to do this unless we reset the + * chip at a PCI level. + * + * Next we need to restore the context, but we don't use those + * yet either... + * + * Ring buffer needs to be re-initialized in the KMS case, or if X + * was running at the time of the reset (i.e. we weren't VT + * switched away). + */ + if (drm_core_check_feature(dev, DRIVER_MODESET) || + !dev_priv->mm.suspended) { + drm_i915_ring_buffer_t *ring = &dev_priv->ring; + struct drm_gem_object *obj = ring->ring_obj; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + dev_priv->mm.suspended = 0; + + /* Stop the ring if it's running. */ + I915_WRITE(PRB0_CTL, 0); + I915_WRITE(PRB0_TAIL, 0); + I915_WRITE(PRB0_HEAD, 0); + + /* Initialize the ring. */ + I915_WRITE(PRB0_START, obj_priv->gtt_offset); + I915_WRITE(PRB0_CTL, + ((obj->size - 4096) & RING_NR_PAGES) | + RING_NO_REPORT | + RING_VALID); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + i915_kernel_lost_context(dev); + else { + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; + ring->space = ring->head - (ring->tail + 8); + if (ring->space < 0) + ring->space += ring->Size; + } + + mutex_unlock(&dev->struct_mutex); + drm_irq_uninstall(dev); + drm_irq_install(dev); + mutex_lock(&dev->struct_mutex); + } + + /* + * Display needs restore too... + */ + if (need_display) + i915_restore_display(dev); + + mutex_unlock(&dev->struct_mutex); + return 0; +} + + static int __devinit i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -188,8 +318,8 @@ static struct drm_driver driver = { .master_create = i915_master_create, .master_destroy = i915_master_destroy, #if defined(CONFIG_DEBUG_FS) - .debugfs_init = i915_gem_debugfs_init, - .debugfs_cleanup = i915_gem_debugfs_cleanup, + .debugfs_init = i915_debugfs_init, + .debugfs_cleanup = i915_debugfs_cleanup, #endif .gem_init_object = i915_gem_init_object, .gem_free_object = i915_gem_free_object, @@ -231,6 +361,8 @@ static int __init i915_init(void) { driver.num_ioctls = i915_max_ioctl; + i915_gem_shrinker_init(); + /* * If CONFIG_DRM_I915_KMS is set, default to KMS unless * explicitly disabled with the module pararmeter. @@ -257,6 +389,7 @@ static int __init i915_init(void) static void __exit i915_exit(void) { + i915_gem_shrinker_exit(); drm_exit(&driver); } |