diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_opregion.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_opregion.c | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c new file mode 100644 index 00000000000..1787a0c7e3a --- /dev/null +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -0,0 +1,371 @@ +/* + * Copyright 2008 Intel Corporation <hong.liu@intel.com> + * Copyright 2008 Red Hat <mjg@redhat.com> + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/acpi.h> + +#include "drmP.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#define PCI_ASLE 0xe4 +#define PCI_LBPC 0xf4 +#define PCI_ASLS 0xfc + +#define OPREGION_SZ (8*1024) +#define OPREGION_HEADER_OFFSET 0 +#define OPREGION_ACPI_OFFSET 0x100 +#define OPREGION_SWSCI_OFFSET 0x200 +#define OPREGION_ASLE_OFFSET 0x300 +#define OPREGION_VBT_OFFSET 0x1000 + +#define OPREGION_SIGNATURE "IntelGraphicsMem" +#define MBOX_ACPI (1<<0) +#define MBOX_SWSCI (1<<1) +#define MBOX_ASLE (1<<2) + +struct opregion_header { + u8 signature[16]; + u32 size; + u32 opregion_ver; + u8 bios_ver[32]; + u8 vbios_ver[16]; + u8 driver_ver[16]; + u32 mboxes; + u8 reserved[164]; +} __attribute__((packed)); + +/* OpRegion mailbox #1: public ACPI methods */ +struct opregion_acpi { + u32 drdy; /* driver readiness */ + u32 csts; /* notification status */ + u32 cevt; /* current event */ + u8 rsvd1[20]; + u32 didl[8]; /* supported display devices ID list */ + u32 cpdl[8]; /* currently presented display list */ + u32 cadl[8]; /* currently active display list */ + u32 nadl[8]; /* next active devices list */ + u32 aslp; /* ASL sleep time-out */ + u32 tidx; /* toggle table index */ + u32 chpd; /* current hotplug enable indicator */ + u32 clid; /* current lid state*/ + u32 cdck; /* current docking state */ + u32 sxsw; /* Sx state resume */ + u32 evts; /* ASL supported events */ + u32 cnot; /* current OS notification */ + u32 nrdy; /* driver status */ + u8 rsvd2[60]; +} __attribute__((packed)); + +/* OpRegion mailbox #2: SWSCI */ +struct opregion_swsci { + u32 scic; /* SWSCI command|status|data */ + u32 parm; /* command parameters */ + u32 dslp; /* driver sleep time-out */ + u8 rsvd[244]; +} __attribute__((packed)); + +/* OpRegion mailbox #3: ASLE */ +struct opregion_asle { + u32 ardy; /* driver readiness */ + u32 aslc; /* ASLE interrupt command */ + u32 tche; /* technology enabled indicator */ + u32 alsi; /* current ALS illuminance reading */ + u32 bclp; /* backlight brightness to set */ + u32 pfit; /* panel fitting state */ + u32 cblv; /* current brightness level */ + u16 bclm[20]; /* backlight level duty cycle mapping table */ + u32 cpfm; /* current panel fitting mode */ + u32 epfm; /* enabled panel fitting modes */ + u8 plut[74]; /* panel LUT and identifier */ + u32 pfmb; /* PWM freq and min brightness */ + u8 rsvd[102]; +} __attribute__((packed)); + +/* ASLE irq request bits */ +#define ASLE_SET_ALS_ILLUM (1 << 0) +#define ASLE_SET_BACKLIGHT (1 << 1) +#define ASLE_SET_PFIT (1 << 2) +#define ASLE_SET_PWM_FREQ (1 << 3) +#define ASLE_REQ_MSK 0xf + +/* response bits of ASLE irq request */ +#define ASLE_ALS_ILLUM_FAIL (2<<10) +#define ASLE_BACKLIGHT_FAIL (2<<12) +#define ASLE_PFIT_FAIL (2<<14) +#define ASLE_PWM_FREQ_FAIL (2<<16) + +/* ASLE backlight brightness to set */ +#define ASLE_BCLP_VALID (1<<31) +#define ASLE_BCLP_MSK (~(1<<31)) + +/* ASLE panel fitting request */ +#define ASLE_PFIT_VALID (1<<31) +#define ASLE_PFIT_CENTER (1<<0) +#define ASLE_PFIT_STRETCH_TEXT (1<<1) +#define ASLE_PFIT_STRETCH_GFX (1<<2) + +/* PWM frequency and minimum brightness */ +#define ASLE_PFMB_BRIGHTNESS_MASK (0xff) +#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8) +#define ASLE_PFMB_PWM_MASK (0x7ffffe00) +#define ASLE_PFMB_PWM_VALID (1<<31) + +#define ASLE_CBLV_VALID (1<<31) + +static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + u32 blc_pwm_ctl, blc_pwm_ctl2; + + if (!(bclp & ASLE_BCLP_VALID)) + return ASLE_BACKLIGHT_FAIL; + + bclp &= ASLE_BCLP_MSK; + if (bclp < 0 || bclp > 255) + return ASLE_BACKLIGHT_FAIL; + + blc_pwm_ctl = I915_READ(BLC_PWM_CTL); + blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; + blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2); + + if (blc_pwm_ctl2 & BLM_COMBINATION_MODE) + pci_write_config_dword(dev->pdev, PCI_LBPC, bclp); + else + I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1)); + + asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID; + + return 0; +} + +static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi) +{ + /* alsi is the current ALS reading in lux. 0 indicates below sensor + range, 0xffff indicates above sensor range. 1-0xfffe are valid */ + return 0; +} + +static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + if (pfmb & ASLE_PFMB_PWM_VALID) { + u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL); + u32 pwm = pfmb & ASLE_PFMB_PWM_MASK; + blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK; + pwm = pwm >> 9; + /* FIXME - what do we do with the PWM? */ + } + return 0; +} + +static u32 asle_set_pfit(struct drm_device *dev, u32 pfit) +{ + /* Panel fitting is currently controlled by the X code, so this is a + noop until modesetting support works fully */ + if (!(pfit & ASLE_PFIT_VALID)) + return ASLE_PFIT_FAIL; + return 0; +} + +void opregion_asle_intr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + u32 asle_stat = 0; + u32 asle_req; + + if (!asle) + return; + + asle_req = asle->aslc & ASLE_REQ_MSK; + + if (!asle_req) { + DRM_DEBUG("non asle set request??\n"); + return; + } + + if (asle_req & ASLE_SET_ALS_ILLUM) + asle_stat |= asle_set_als_illum(dev, asle->alsi); + + if (asle_req & ASLE_SET_BACKLIGHT) + asle_stat |= asle_set_backlight(dev, asle->bclp); + + if (asle_req & ASLE_SET_PFIT) + asle_stat |= asle_set_pfit(dev, asle->pfit); + + if (asle_req & ASLE_SET_PWM_FREQ) + asle_stat |= asle_set_pwm_freq(dev, asle->pfmb); + + asle->aslc = asle_stat; +} + +#define ASLE_ALS_EN (1<<0) +#define ASLE_BLC_EN (1<<1) +#define ASLE_PFIT_EN (1<<2) +#define ASLE_PFMB_EN (1<<3) + +void opregion_enable_asle(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + + if (asle) { + u32 pipeb_stats = I915_READ(PIPEBSTAT); + if (IS_MOBILE(dev)) { + /* Many devices trigger events with a write to the + legacy backlight controller, so we need to ensure + that it's able to generate interrupts */ + I915_WRITE(PIPEBSTAT, pipeb_stats |= + I915_LEGACY_BLC_EVENT_ENABLE); + i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT | + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + } else + i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT); + + asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | + ASLE_PFMB_EN; + asle->ardy = 1; + } +} + +#define ACPI_EV_DISPLAY_SWITCH (1<<0) +#define ACPI_EV_LID (1<<1) +#define ACPI_EV_DOCK (1<<2) + +static struct intel_opregion *system_opregion; + +int intel_opregion_video_event(struct notifier_block *nb, unsigned long val, + void *data) +{ + /* The only video events relevant to opregion are 0x80. These indicate + either a docking event, lid switch or display switch request. In + Linux, these are handled by the dock, button and video drivers. + We might want to fix the video driver to be opregion-aware in + future, but right now we just indicate to the firmware that the + request has been handled */ + + struct opregion_acpi *acpi; + + if (!system_opregion) + return NOTIFY_DONE; + + acpi = system_opregion->acpi; + acpi->csts = 0; + + return NOTIFY_OK; +} + +static struct notifier_block intel_opregion_notifier = { + .notifier_call = intel_opregion_video_event, +}; + +int intel_opregion_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_opregion *opregion = &dev_priv->opregion; + void *base; + u32 asls, mboxes; + int err = 0; + + pci_read_config_dword(dev->pdev, PCI_ASLS, &asls); + DRM_DEBUG("graphic opregion physical addr: 0x%x\n", asls); + if (asls == 0) { + DRM_DEBUG("ACPI OpRegion not supported!\n"); + return -ENOTSUPP; + } + + base = ioremap(asls, OPREGION_SZ); + if (!base) + return -ENOMEM; + + opregion->header = base; + if (memcmp(opregion->header->signature, OPREGION_SIGNATURE, 16)) { + DRM_DEBUG("opregion signature mismatch\n"); + err = -EINVAL; + goto err_out; + } + + mboxes = opregion->header->mboxes; + if (mboxes & MBOX_ACPI) { + DRM_DEBUG("Public ACPI methods supported\n"); + opregion->acpi = base + OPREGION_ACPI_OFFSET; + } else { + DRM_DEBUG("Public ACPI methods not supported\n"); + err = -ENOTSUPP; + goto err_out; + } + opregion->enabled = 1; + + if (mboxes & MBOX_SWSCI) { + DRM_DEBUG("SWSCI supported\n"); + opregion->swsci = base + OPREGION_SWSCI_OFFSET; + } + if (mboxes & MBOX_ASLE) { + DRM_DEBUG("ASLE supported\n"); + opregion->asle = base + OPREGION_ASLE_OFFSET; + } + + /* Notify BIOS we are ready to handle ACPI video ext notifs. + * Right now, all the events are handled by the ACPI video module. + * We don't actually need to do anything with them. */ + opregion->acpi->csts = 0; + opregion->acpi->drdy = 1; + + system_opregion = opregion; + register_acpi_notifier(&intel_opregion_notifier); + + return 0; + +err_out: + iounmap(opregion->header); + opregion->header = NULL; + return err; +} + +void intel_opregion_free(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_opregion *opregion = &dev_priv->opregion; + + if (!opregion->enabled) + return; + + opregion->acpi->drdy = 0; + + system_opregion = NULL; + unregister_acpi_notifier(&intel_opregion_notifier); + + /* just clear all opregion memory pointers now */ + iounmap(opregion->header); + opregion->header = NULL; + opregion->acpi = NULL; + opregion->swsci = NULL; + opregion->asle = NULL; + + opregion->enabled = 0; +} |