summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r--drivers/gpu/drm/i915/intel_display.c519
1 files changed, 289 insertions, 230 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5ec10e02341..23157e1de3b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -29,6 +29,7 @@
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/vgaarb.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
@@ -976,14 +977,54 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
return true;
}
-void
-intel_wait_for_vblank(struct drm_device *dev)
+/**
+ * intel_wait_for_vblank - wait for vblank on a given pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * Wait for vblank to occur on a given pipe. Needed for various bits of
+ * mode setting code.
+ */
+void intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- if (in_dbg_master())
- mdelay(20); /* The kernel debugger cannot call msleep() */
- else
- msleep(20);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
+
+ /* Wait for vblank interrupt bit to set */
+ if (wait_for((I915_READ(pipestat_reg) &
+ PIPE_VBLANK_INTERRUPT_STATUS) == 0,
+ 50, 0))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
+}
+
+/**
+ * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * After disabling a pipe, we can't wait for vblank in the usual way,
+ * spinning on the vblank interrupt status bit, since we won't actually
+ * see an interrupt when the pipe is disabled.
+ *
+ * So this function waits for the display line value to settle (it
+ * usually ends up stopping at the start of the next frame).
+ */
+void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ u32 last_line;
+
+ /* Wait for the display line to settle */
+ do {
+ last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+ mdelay(5);
+ } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+ time_after(timeout, jiffies));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
}
/* Parameters have changed, update FBC info */
@@ -1037,7 +1078,6 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
void i8xx_disable_fbc(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long timeout = jiffies + msecs_to_jiffies(1);
u32 fbc_ctl;
if (!I915_HAS_FBC(dev))
@@ -1052,16 +1092,11 @@ void i8xx_disable_fbc(struct drm_device *dev)
I915_WRITE(FBC_CONTROL, fbc_ctl);
/* Wait for compressing bit to clear */
- while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) {
- if (time_after(jiffies, timeout)) {
- DRM_DEBUG_DRIVER("FBC idle timed out\n");
- break;
- }
- ; /* do nothing */
+ if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) {
+ DRM_DEBUG_KMS("FBC idle timed out\n");
+ return;
}
- intel_wait_for_vblank(dev);
-
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1118,7 +1153,6 @@ void g4x_disable_fbc(struct drm_device *dev)
dpfc_ctl = I915_READ(DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1179,7 +1213,6 @@ void ironlake_disable_fbc(struct drm_device *dev)
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1478,7 +1511,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_increase_pllclock(crtc, true);
return 0;
@@ -1585,20 +1618,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
Start, Offset, x, y, crtc->fb->pitch);
I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
- I915_WRITE(dspbase, Offset);
- I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
- I915_READ(dspsurf);
I915_WRITE(dsptileoff, (y << 16) | x);
+ I915_WRITE(dspbase, Offset);
} else {
I915_WRITE(dspbase, Start + Offset);
- I915_READ(dspbase);
}
+ POSTING_READ(dspbase);
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
@@ -1627,54 +1658,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return 0;
}
-/* Disable the VGA plane that we never use */
-static void i915_disable_vga (struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- u8 sr1;
- u32 vga_reg;
-
- if (HAS_PCH_SPLIT(dev))
- vga_reg = CPU_VGACNTRL;
- else
- vga_reg = VGACNTRL;
-
- if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
- return;
-
- I915_WRITE8(VGA_SR_INDEX, 1);
- sr1 = I915_READ8(VGA_SR_DATA);
- I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
- udelay(100);
-
- I915_WRITE(vga_reg, VGA_DISP_DISABLE);
-}
-
-static void ironlake_disable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- DRM_DEBUG_KMS("\n");
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl &= ~DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
-}
-
-static void ironlake_enable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl |= DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
- udelay(200);
-}
-
-
static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock)
{
struct drm_device *dev = crtc->dev;
@@ -1945,7 +1928,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
int trans_dpll_sel = (pipe == 0) ? 0 : 1;
u32 temp;
- int n;
u32 pipe_bpc;
temp = I915_READ(pipeconf_reg);
@@ -1958,7 +1940,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
- DRM_DEBUG_KMS("crtc %d dpms on\n", pipe);
+ DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
temp = I915_READ(PCH_LVDS);
@@ -1968,10 +1950,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
}
}
- if (HAS_eDP) {
- /* enable eDP PLL */
- ironlake_enable_pll_edp(crtc);
- } else {
+ if (!HAS_eDP) {
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
@@ -2005,15 +1984,13 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
/* Enable panel fitting for LVDS */
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
|| HAS_eDP || intel_pch_has_edp(crtc)) {
- temp = I915_READ(pf_ctl_reg);
- I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
-
- /* currently full aspect */
- I915_WRITE(pf_win_pos, 0);
-
- I915_WRITE(pf_win_size,
- (dev_priv->panel_fixed_mode->hdisplay << 16) |
- (dev_priv->panel_fixed_mode->vdisplay));
+ if (dev_priv->pch_pf_size) {
+ temp = I915_READ(pf_ctl_reg);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
+ I915_WRITE(pf_win_pos, dev_priv->pch_pf_pos);
+ I915_WRITE(pf_win_size, dev_priv->pch_pf_size);
+ } else
+ I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
}
/* Enable CPU pipe */
@@ -2097,9 +2074,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
int reg;
reg = I915_READ(trans_dp_ctl);
- reg &= ~TRANS_DP_PORT_SEL_MASK;
- reg = TRANS_DP_OUTPUT_ENABLE |
- TRANS_DP_ENH_FRAMING;
+ reg &= ~(TRANS_DP_PORT_SEL_MASK |
+ TRANS_DP_SYNC_MASK);
+ reg |= (TRANS_DP_OUTPUT_ENABLE |
+ TRANS_DP_ENH_FRAMING);
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
@@ -2137,18 +2115,17 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
- ;
-
+ if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10, 0))
+ DRM_ERROR("failed to enable transcoder\n");
}
intel_crtc_load_lut(crtc);
intel_update_fbc(crtc, &crtc->mode);
+ break;
- break;
case DRM_MODE_DPMS_OFF:
- DRM_DEBUG_KMS("crtc %d dpms off\n", pipe);
+ DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
drm_vblank_off(dev, pipe);
/* Disable display plane */
@@ -2164,26 +2141,14 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
dev_priv->display.disable_fbc)
dev_priv->display.disable_fbc(dev);
- i915_disable_vga(dev);
-
/* disable cpu pipe, disable after all planes disabled */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
- I915_READ(pipeconf_reg);
- n = 0;
+
/* wait for cpu pipe off, pipe state */
- while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
- n++;
- if (n < 60) {
- udelay(500);
- continue;
- } else {
- DRM_DEBUG_KMS("pipe %d off delay\n",
- pipe);
- break;
- }
- }
+ if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1))
+ DRM_ERROR("failed to turn off cpu pipe\n");
} else
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
@@ -2244,20 +2209,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
temp = I915_READ(transconf_reg);
if ((temp & TRANS_ENABLE) != 0) {
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
- I915_READ(transconf_reg);
- n = 0;
+
/* wait for PCH transcoder off, transcoder state */
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
- n++;
- if (n < 60) {
- udelay(500);
- continue;
- } else {
- DRM_DEBUG_KMS("transcoder %d off "
- "delay\n", pipe);
- break;
- }
- }
+ if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1))
+ DRM_ERROR("failed to disable transcoder\n");
}
temp = I915_READ(transconf_reg);
@@ -2294,10 +2249,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
I915_READ(pch_dpll_reg);
- if (HAS_eDP) {
- ironlake_disable_pll_edp(crtc);
- }
-
/* Switch from PCDclk to Rawclk */
temp = I915_READ(fdi_rx_reg);
temp &= ~FDI_SEL_PCDCLK;
@@ -2372,8 +2323,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
- intel_update_watermarks(dev);
-
/* Enable the DPLL */
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
@@ -2413,8 +2362,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
intel_crtc_dpms_overlay(intel_crtc, true);
break;
case DRM_MODE_DPMS_OFF:
- intel_update_watermarks(dev);
-
/* Give the overlay scaler a chance to disable if it's on this pipe */
intel_crtc_dpms_overlay(intel_crtc, false);
drm_vblank_off(dev, pipe);
@@ -2423,9 +2370,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
dev_priv->display.disable_fbc)
dev_priv->display.disable_fbc(dev);
- /* Disable the VGA plane that we never use */
- i915_disable_vga(dev);
-
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
@@ -2435,10 +2379,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_READ(dspbase_reg);
}
- if (!IS_I9XX(dev)) {
- /* Wait for vblank for the disable to take effect */
- intel_wait_for_vblank(dev);
- }
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank_off(dev, pipe);
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipeconf_reg == PIPEACONF &&
@@ -2453,7 +2395,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
}
/* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank_off(dev, pipe);
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) != 0) {
@@ -2469,9 +2411,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
/**
* Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
*/
static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
{
@@ -2482,9 +2421,26 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
int pipe = intel_crtc->pipe;
bool enabled;
+ intel_crtc->dpms_mode = mode;
+ intel_crtc->cursor_on = mode == DRM_MODE_DPMS_ON;
+
+ /* When switching on the display, ensure that SR is disabled
+ * with multiple pipes prior to enabling to new pipe.
+ *
+ * When switching off the display, make sure the cursor is
+ * properly hidden prior to disabling the pipe.
+ */
+ if (mode == DRM_MODE_DPMS_ON)
+ intel_update_watermarks(dev);
+ else
+ intel_crtc_update_cursor(crtc);
+
dev_priv->display.dpms(crtc, mode);
- intel_crtc->dpms_mode = mode;
+ if (mode == DRM_MODE_DPMS_ON)
+ intel_crtc_update_cursor(crtc);
+ else
+ intel_update_watermarks(dev);
if (!dev->primary->master)
return;
@@ -2536,6 +2492,20 @@ void intel_encoder_commit (struct drm_encoder *encoder)
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
}
+void intel_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+
+ if (intel_encoder->ddc_bus)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
+
+ if (intel_encoder->i2c_bus)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
+
+ drm_encoder_cleanup(encoder);
+ kfree(intel_encoder);
+}
+
static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -2867,7 +2837,7 @@ struct cxsr_latency {
unsigned long cursor_hpll_disable;
};
-static struct cxsr_latency cxsr_latency_table[] = {
+static const struct cxsr_latency cxsr_latency_table[] = {
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
@@ -2905,11 +2875,13 @@ static struct cxsr_latency cxsr_latency_table[] = {
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
};
-static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3,
- int fsb, int mem)
+static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
+ int is_ddr3,
+ int fsb,
+ int mem)
{
+ const struct cxsr_latency *latency;
int i;
- struct cxsr_latency *latency;
if (fsb == 0 || mem == 0)
return NULL;
@@ -2930,13 +2902,9 @@ static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3,
static void pineview_disable_cxsr(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 reg;
/* deactivate cxsr */
- reg = I915_READ(DSPFW3);
- reg &= ~(PINEVIEW_SELF_REFRESH_EN);
- I915_WRITE(DSPFW3, reg);
- DRM_INFO("Big FIFO is disabled\n");
+ I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
}
/*
@@ -3024,12 +2992,12 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock,
int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ const struct cxsr_latency *latency;
u32 reg;
unsigned long wm;
- struct cxsr_latency *latency;
int sr_clock;
- latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
+ latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
dev_priv->fsb_freq, dev_priv->mem_freq);
if (!latency) {
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
@@ -3075,9 +3043,8 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock,
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
/* activate cxsr */
- reg = I915_READ(DSPFW3);
- reg |= PINEVIEW_SELF_REFRESH_EN;
- I915_WRITE(DSPFW3, reg);
+ I915_WRITE(DSPFW3,
+ I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
DRM_DEBUG_KMS("Self-refresh is enabled\n");
} else {
pineview_disable_cxsr(dev);
@@ -3354,12 +3321,11 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock,
int line_count;
int planea_htotal = 0, planeb_htotal = 0;
struct drm_crtc *crtc;
- struct intel_crtc *intel_crtc;
/* Need htotal for all active display plane */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- intel_crtc = to_intel_crtc(crtc);
- if (crtc->enabled) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) {
if (intel_crtc->plane == 0)
planea_htotal = crtc->mode.htotal;
else
@@ -3519,7 +3485,6 @@ static void intel_update_watermarks(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
- struct intel_crtc *intel_crtc;
int sr_hdisplay = 0;
unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
int enabled = 0, pixel_size = 0;
@@ -3530,8 +3495,8 @@ static void intel_update_watermarks(struct drm_device *dev)
/* Get the clock config from both planes */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- intel_crtc = to_intel_crtc(crtc);
- if (crtc->enabled) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) {
enabled++;
if (intel_crtc->plane == 0) {
DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n",
@@ -3966,9 +3931,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
dpll_reg = pch_dpll_reg;
}
- if (is_edp) {
- ironlake_disable_pll_edp(crtc);
- } else if ((dpll & DPLL_VCO_ENABLE)) {
+ if (!is_edp) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
@@ -4167,7 +4130,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(pipeconf_reg, pipeconf);
I915_READ(pipeconf_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (IS_IRONLAKE(dev)) {
/* enable address swizzle for tiling buffer */
@@ -4180,9 +4143,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
/* Flush the plane changes */
ret = intel_pipe_set_base(crtc, x, y, old_fb);
- if ((IS_I965G(dev) || plane == 0))
- intel_update_fbc(crtc, &crtc->mode);
-
intel_update_watermarks(dev);
drm_vblank_post_modeset(dev, pipe);
@@ -4216,6 +4176,62 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
}
}
+static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ bool visible = base != 0;
+ u32 cntl;
+
+ if (intel_crtc->cursor_visible == visible)
+ return;
+
+ cntl = I915_READ(CURACNTR);
+ if (visible) {
+ /* On these chipsets we can only modify the base whilst
+ * the cursor is disabled.
+ */
+ I915_WRITE(CURABASE, base);
+
+ cntl &= ~(CURSOR_FORMAT_MASK);
+ /* XXX width must be 64, stride 256 => 0x00 << 28 */
+ cntl |= CURSOR_ENABLE |
+ CURSOR_GAMMA_ENABLE |
+ CURSOR_FORMAT_ARGB;
+ } else
+ cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+ I915_WRITE(CURACNTR, cntl);
+
+ intel_crtc->cursor_visible = visible;
+}
+
+static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ bool visible = base != 0;
+
+ if (intel_crtc->cursor_visible != visible) {
+ uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR);
+ if (base) {
+ cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+ cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ cntl |= pipe << 28; /* Connect to correct pipe */
+ } else {
+ cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ cntl |= CURSOR_MODE_DISABLE;
+ }
+ I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl);
+
+ intel_crtc->cursor_visible = visible;
+ }
+ /* and commit changes on next vblank */
+ I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base);
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc)
{
@@ -4225,12 +4241,12 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
int x = intel_crtc->cursor_x;
int y = intel_crtc->cursor_y;
- uint32_t base, pos;
+ u32 base, pos;
bool visible;
pos = 0;
- if (crtc->fb) {
+ if (intel_crtc->cursor_on && crtc->fb) {
base = intel_crtc->cursor_addr;
if (x > (int) crtc->fb->width)
base = 0;
@@ -4259,37 +4275,14 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc)
pos |= y << CURSOR_Y_SHIFT;
visible = base != 0;
- if (!visible && !intel_crtc->cursor_visble)
+ if (!visible && !intel_crtc->cursor_visible)
return;
I915_WRITE(pipe == 0 ? CURAPOS : CURBPOS, pos);
- if (intel_crtc->cursor_visble != visible) {
- uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR);
- if (base) {
- /* Hooray for CUR*CNTR differences */
- if (IS_MOBILE(dev) || IS_I9XX(dev)) {
- cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
- cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
- cntl |= pipe << 28; /* Connect to correct pipe */
- } else {
- cntl &= ~(CURSOR_FORMAT_MASK);
- cntl |= CURSOR_ENABLE;
- cntl |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
- }
- } else {
- if (IS_MOBILE(dev) || IS_I9XX(dev)) {
- cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
- cntl |= CURSOR_MODE_DISABLE;
- } else {
- cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
- }
- }
- I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl);
-
- intel_crtc->cursor_visble = visible;
- }
- /* and commit changes on next vblank */
- I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base);
+ if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
if (visible)
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
@@ -4354,8 +4347,10 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
addr = obj_priv->gtt_offset;
} else {
+ int align = IS_I830(dev) ? 16 * 1024 : 256;
ret = i915_gem_attach_phys_object(dev, bo,
- (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+ (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
+ align);
if (ret) {
DRM_ERROR("failed to attach phys object\n");
goto fail_locked;
@@ -4544,7 +4539,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
encoder_funcs->commit(encoder);
}
/* let the connector get through one full cycle before testing */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
return crtc;
}
@@ -4749,7 +4744,7 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (dpll & DISPLAY_RATE_SELECT_FPA1)
DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
@@ -4793,7 +4788,7 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
dpll |= DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
@@ -5083,14 +5078,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
work->pending_flip_obj = obj;
if (intel_crtc->plane)
- flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
else
- flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
- /* Wait for any previous flip to finish */
- if (IS_GEN3(dev))
- while (I915_READ(ISR) & flip_mask)
- ;
+ if (IS_GEN3(dev) || IS_GEN2(dev)) {
+ BEGIN_LP_RING(2);
+ OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ }
/* Offset into the new buffer for cases of shared fbs between CRTCs */
offset = obj_priv->gtt_offset;
@@ -5104,12 +5101,18 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
OUT_RING(offset | obj_priv->tiling_mode);
pipesrc = I915_READ(pipesrc_reg);
OUT_RING(pipesrc & 0x0fff0fff);
- } else {
+ } else if (IS_GEN3(dev)) {
OUT_RING(MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
OUT_RING(offset);
OUT_RING(MI_NOOP);
+ } else {
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(offset);
+ OUT_RING(MI_NOOP);
}
ADVANCE_LP_RING();
@@ -5432,37 +5435,37 @@ static const struct drm_mode_config_funcs intel_mode_funcs = {
};
static struct drm_gem_object *
-intel_alloc_power_context(struct drm_device *dev)
+intel_alloc_context_page(struct drm_device *dev)
{
- struct drm_gem_object *pwrctx;
+ struct drm_gem_object *ctx;
int ret;
- pwrctx = i915_gem_alloc_object(dev, 4096);
- if (!pwrctx) {
+ ctx = i915_gem_alloc_object(dev, 4096);
+ if (!ctx) {
DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
return NULL;
}
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_pin(pwrctx, 4096);
+ ret = i915_gem_object_pin(ctx, 4096);
if (ret) {
DRM_ERROR("failed to pin power context: %d\n", ret);
goto err_unref;
}
- ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
+ ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
if (ret) {
DRM_ERROR("failed to set-domain on power context: %d\n", ret);
goto err_unpin;
}
mutex_unlock(&dev->struct_mutex);
- return pwrctx;
+ return ctx;
err_unpin:
- i915_gem_object_unpin(pwrctx);
+ i915_gem_object_unpin(ctx);
err_unref:
- drm_gem_object_unreference(pwrctx);
+ drm_gem_object_unreference(ctx);
mutex_unlock(&dev->struct_mutex);
return NULL;
}
@@ -5494,7 +5497,6 @@ void ironlake_enable_drps(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL);
u8 fmax, fmin, fstart, vstart;
- int i = 0;
/* 100ms RC evaluation intervals */
I915_WRITE(RCUPEI, 100000);
@@ -5538,13 +5540,8 @@ void ironlake_enable_drps(struct drm_device *dev)
rgvmodectl |= MEMMODE_SWMODE_EN;
I915_WRITE(MEMMODECTL, rgvmodectl);
- while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) {
- if (i++ > 100) {
- DRM_ERROR("stuck trying to change perf mode\n");
- break;
- }
- msleep(1);
- }
+ if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0))
+ DRM_ERROR("stuck trying to change perf mode\n");
msleep(1);
ironlake_set_drps(dev, fstart);
@@ -5725,7 +5722,8 @@ void intel_init_clock_gating(struct drm_device *dev)
ILK_DPFC_DIS2 |
ILK_CLK_FBC);
}
- return;
+ if (IS_GEN6(dev))
+ return;
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
@@ -5768,6 +5766,31 @@ void intel_init_clock_gating(struct drm_device *dev)
* GPU can automatically power down the render unit if given a page
* to save state.
*/
+ if (IS_IRONLAKE_M(dev)) {
+ if (dev_priv->renderctx == NULL)
+ dev_priv->renderctx = intel_alloc_context_page(dev);
+ if (dev_priv->renderctx) {
+ struct drm_i915_gem_object *obj_priv;
+ obj_priv = to_intel_bo(dev_priv->renderctx);
+ if (obj_priv) {
+ BEGIN_LP_RING(4);
+ OUT_RING(MI_SET_CONTEXT);
+ OUT_RING(obj_priv->gtt_offset |
+ MI_MM_SPACE_GTT |
+ MI_SAVE_EXT_STATE_EN |
+ MI_RESTORE_EXT_STATE_EN |
+ MI_RESTORE_INHIBIT);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_FLUSH);
+ ADVANCE_LP_RING();
+ }
+ } else {
+ DRM_DEBUG_KMS("Failed to allocate render context."
+ "Disable RC6\n");
+ return;
+ }
+ }
+
if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
struct drm_i915_gem_object *obj_priv = NULL;
@@ -5776,7 +5799,7 @@ void intel_init_clock_gating(struct drm_device *dev)
} else {
struct drm_gem_object *pwrctx;
- pwrctx = intel_alloc_power_context(dev);
+ pwrctx = intel_alloc_context_page(dev);
if (pwrctx) {
dev_priv->pwrctx = pwrctx;
obj_priv = to_intel_bo(pwrctx);
@@ -5948,6 +5971,29 @@ static void intel_init_quirks(struct drm_device *dev)
}
}
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u8 sr1;
+ u32 vga_reg;
+
+ if (HAS_PCH_SPLIT(dev))
+ vga_reg = CPU_VGACNTRL;
+ else
+ vga_reg = VGACNTRL;
+
+ vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+ outb(1, VGA_SR_INDEX);
+ sr1 = inb(VGA_SR_DATA);
+ outb(sr1 | 1<<5, VGA_SR_DATA);
+ vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+ udelay(300);
+
+ I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+ POSTING_READ(vga_reg);
+}
+
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5996,6 +6042,9 @@ void intel_modeset_init(struct drm_device *dev)
intel_init_clock_gating(dev);
+ /* Just disable it once at startup */
+ i915_disable_vga(dev);
+
if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);
intel_init_emon(dev);
@@ -6034,6 +6083,16 @@ void intel_modeset_cleanup(struct drm_device *dev)
if (dev_priv->display.disable_fbc)
dev_priv->display.disable_fbc(dev);
+ if (dev_priv->renderctx) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = to_intel_bo(dev_priv->renderctx);
+ I915_WRITE(CCID, obj_priv->gtt_offset &~ CCID_EN);
+ I915_READ(CCID);
+ i915_gem_object_unpin(dev_priv->renderctx);
+ drm_gem_object_unreference(dev_priv->renderctx);
+ }
+
if (dev_priv->pwrctx) {
struct drm_i915_gem_object *obj_priv;