diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 133 |
1 files changed, 75 insertions, 58 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f1a649990ea..25bcedf386f 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) /** * Sets the power state for the panel. */ -static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) +static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) lvds_reg = LVDS; } - if (on) { - I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - intel_panel_set_backlight(dev, dev_priv->backlight_level); - } else { - dev_priv->backlight_level = intel_panel_get_backlight(dev); - - intel_panel_set_backlight(dev, 0); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - if (intel_lvds->pfit_control) { - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - I915_WRITE(PFIT_CONTROL, 0); - intel_lvds->pfit_control = 0; + if (intel_lvds->pfit_dirty) { + /* + * Enable automatic panel scaling so that non-native modes + * fill the screen. The panel fitter should only be + * adjusted whilst the pipe is disabled, according to + * register description and PRM. + */ + DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", + intel_lvds->pfit_control, + intel_lvds->pfit_pgm_ratios); + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) { + DRM_ERROR("timed out waiting for panel to power off\n"); + } else { + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); intel_lvds->pfit_dirty = false; } + } + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); + POSTING_READ(lvds_reg); + + intel_panel_set_backlight(dev, dev_priv->backlight_level); +} + +static void intel_lvds_disable(struct intel_lvds *intel_lvds) +{ + struct drm_device *dev = intel_lvds->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 ctl_reg, lvds_reg; + + if (HAS_PCH_SPLIT(dev)) { + ctl_reg = PCH_PP_CONTROL; + lvds_reg = PCH_LVDS; + } else { + ctl_reg = PP_CONTROL; + lvds_reg = LVDS; + } + + dev_priv->backlight_level = intel_panel_get_backlight(dev); + intel_panel_set_backlight(dev, 0); - I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + + if (intel_lvds->pfit_control) { + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + + I915_WRITE(PFIT_CONTROL, 0); + intel_lvds->pfit_dirty = true; } + + I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); POSTING_READ(lvds_reg); } @@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) struct intel_lvds *intel_lvds = to_intel_lvds(encoder); if (mode == DRM_MODE_DPMS_ON) - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); else - intel_lvds_set_power(intel_lvds, false); + intel_lvds_disable(intel_lvds); /* XXX: We never power down the LVDS pairs. */ } @@ -411,43 +446,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder) /* Always do a full power on as we do not know what state * we were left in. */ - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); } static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* * The LVDS pin pair will already have been turned on in the * intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ - - if (HAS_PCH_SPLIT(dev)) - return; - - if (!intel_lvds->pfit_dirty) - return; - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", - intel_lvds->pfit_control, - intel_lvds->pfit_pgm_ratios); - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); - intel_lvds->pfit_dirty = false; } /** @@ -481,11 +491,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector) struct drm_device *dev = connector->dev; struct drm_display_mode *mode; - if (intel_lvds->edid) { - drm_mode_connector_update_edid_property(connector, - intel_lvds->edid); + if (intel_lvds->edid) return drm_add_edid_modes(connector, intel_lvds->edid); - } mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode); if (mode == 0) @@ -840,7 +847,7 @@ static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin) * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ -void intel_lvds_init(struct drm_device *dev) +bool intel_lvds_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_lvds *intel_lvds; @@ -856,37 +863,37 @@ void intel_lvds_init(struct drm_device *dev) /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) - return; + return false; pin = GMBUS_PORT_PANEL; if (!lvds_is_present_in_vbt(dev, &pin)) { DRM_DEBUG_KMS("LVDS is not present in VBT\n"); - return; + return false; } if (HAS_PCH_SPLIT(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) - return; + return false; if (dev_priv->edp.support) { DRM_DEBUG_KMS("disable LVDS for eDP support\n"); - return; + return false; } } if (!intel_lvds_ddc_probe(dev, pin)) { DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n"); - return; + return false; } intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL); if (!intel_lvds) { - return; + return false; } intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { kfree(intel_lvds); - return; + return false; } if (!HAS_PCH_SPLIT(dev)) { @@ -939,7 +946,16 @@ void intel_lvds_init(struct drm_device *dev) */ intel_lvds->edid = drm_get_edid(connector, &dev_priv->gmbus[pin].adapter); - + if (intel_lvds->edid) { + if (drm_add_edid_modes(connector, + intel_lvds->edid)) { + drm_mode_connector_update_edid_property(connector, + intel_lvds->edid); + } else { + kfree(intel_lvds->edid); + intel_lvds->edid = NULL; + } + } if (!intel_lvds->edid) { /* Didn't get an EDID, so * Set wide sync ranges so we get all modes @@ -1020,7 +1036,7 @@ out: /* keep the LVDS connector */ dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); - return; + return true; failed: DRM_DEBUG_KMS("No LVDS modes found, disabling.\n"); @@ -1028,4 +1044,5 @@ failed: drm_encoder_cleanup(encoder); kfree(intel_lvds); kfree(intel_connector); + return false; } |