diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 165 |
1 files changed, 145 insertions, 20 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b9a660a5367..8c61876dbe9 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -52,6 +52,8 @@ struct intel_lvds_encoder { u32 pfit_control; u32 pfit_pgm_ratios; bool pfit_dirty; + bool is_dual_link; + u32 reg; struct intel_lvds_connector *attached_connector; }; @@ -71,15 +73,10 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder, { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 lvds_reg, tmp; - - if (HAS_PCH_SPLIT(dev)) { - lvds_reg = PCH_LVDS; - } else { - lvds_reg = LVDS; - } + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base); + u32 tmp; - tmp = I915_READ(lvds_reg); + tmp = I915_READ(lvds_encoder->reg); if (!(tmp & LVDS_PORT_EN)) return false; @@ -92,6 +89,68 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder, return true; } +/* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ +static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder) +{ + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct drm_display_mode *fixed_mode = + lvds_encoder->attached_connector->base.panel.fixed_mode; + int pipe = intel_crtc->pipe; + u32 temp; + + temp = I915_READ(lvds_encoder->reg); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; + temp |= PORT_TRANS_SEL_CPT(pipe); + } else { + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + } + + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (lvds_encoder->is_dual_link) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + + /* Set the dithering flag on LVDS as needed, note that there is no + * special lvds dither control bit on pch-split platforms, dithering is + * only controlled through the PIPECONF reg. */ + if (INTEL_INFO(dev)->gen == 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC) + temp |= LVDS_HSYNC_POLARITY; + if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC) + temp |= LVDS_VSYNC_POLARITY; + + I915_WRITE(lvds_encoder->reg, temp); +} + /** * Sets the power state for the panel. */ @@ -101,19 +160,17 @@ static void intel_enable_lvds(struct intel_encoder *encoder) struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base); struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); struct drm_i915_private *dev_priv = dev->dev_private; - u32 ctl_reg, lvds_reg, stat_reg; + u32 ctl_reg, stat_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; - lvds_reg = PCH_LVDS; stat_reg = PCH_PP_STATUS; } else { ctl_reg = PP_CONTROL; - lvds_reg = LVDS; stat_reg = PP_STATUS; } - I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); + I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN); if (lvds_encoder->pfit_dirty) { /* @@ -132,7 +189,7 @@ static void intel_enable_lvds(struct intel_encoder *encoder) } I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - POSTING_READ(lvds_reg); + POSTING_READ(lvds_encoder->reg); if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000)) DRM_ERROR("timed out waiting for panel to power on\n"); @@ -144,15 +201,13 @@ static void intel_disable_lvds(struct intel_encoder *encoder) struct drm_device *dev = encoder->base.dev; struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base); struct drm_i915_private *dev_priv = dev->dev_private; - u32 ctl_reg, lvds_reg, stat_reg; + u32 ctl_reg, stat_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; - lvds_reg = PCH_LVDS; stat_reg = PCH_PP_STATUS; } else { ctl_reg = PP_CONTROL; - lvds_reg = LVDS; stat_reg = PP_STATUS; } @@ -167,8 +222,8 @@ static void intel_disable_lvds(struct intel_encoder *encoder) lvds_encoder->pfit_dirty = true; } - I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); - POSTING_READ(lvds_reg); + I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN); + POSTING_READ(lvds_encoder->reg); } static int intel_lvds_mode_valid(struct drm_connector *connector, @@ -591,8 +646,7 @@ static int intel_lvds_set_property(struct drm_connector *connector, * If the CRTC is enabled, the display will be changed * according to the new panel fitting mode. */ - intel_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, crtc->fb); + intel_crtc_restore_mode(crtc); } } @@ -903,6 +957,66 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev, return false; } +static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) +{ + DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_dual_link_lvds[] = { + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro (Core i5/i7 Series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), + }, + }, + { } /* terminating entry */ +}; + +bool intel_is_dual_link_lvds(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_lvds_encoder *lvds_encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->type == INTEL_OUTPUT_LVDS) { + lvds_encoder = to_lvds_encoder(&encoder->base); + + return lvds_encoder->is_dual_link; + } + } + + return false; +} + +static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder) +{ + struct drm_device *dev = lvds_encoder->base.base.dev; + unsigned int val; + struct drm_i915_private *dev_priv = dev->dev_private; + + /* use the module option value if specified */ + if (i915_lvds_channel_mode > 0) + return i915_lvds_channel_mode == 2; + + if (dmi_check_system(intel_dual_link_lvds)) + return true; + + /* BIOS should set the proper LVDS register value at boot, but + * in reality, it doesn't set the value when the lid is closed; + * we need to check "the value to be set" in VBT when LVDS + * register is uninitialized. + */ + val = I915_READ(lvds_encoder->reg); + if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED))) + val = dev_priv->bios_lvds_val; + + return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP; +} + static bool intel_lvds_supported(struct drm_device *dev) { /* With the introduction of the PCH we gained a dedicated @@ -988,6 +1102,7 @@ bool intel_lvds_init(struct drm_device *dev) DRM_MODE_ENCODER_LVDS); intel_encoder->enable = intel_enable_lvds; + intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds; intel_encoder->disable = intel_disable_lvds; intel_encoder->get_hw_state = intel_lvds_get_hw_state; intel_connector->get_hw_state = intel_connector_get_hw_state; @@ -1009,6 +1124,12 @@ bool intel_lvds_init(struct drm_device *dev) connector->interlace_allowed = false; connector->doublescan_allowed = false; + if (HAS_PCH_SPLIT(dev)) { + lvds_encoder->reg = PCH_LVDS; + } else { + lvds_encoder->reg = LVDS; + } + /* create the scaling mode property */ drm_mode_create_scaling_mode_property(dev); drm_object_attach_property(&connector->base, @@ -1109,6 +1230,10 @@ bool intel_lvds_init(struct drm_device *dev) goto failed; out: + lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder); + DRM_DEBUG_KMS("detected %s-link lvds configuration\n", + lvds_encoder->is_dual_link ? "dual" : "single"); + /* * Unlock registers and just * leave them unlocked |