diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 142 |
1 files changed, 119 insertions, 23 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 05598ae10c4..3118ce274e6 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -56,7 +56,7 @@ static void intel_lvds_set_backlight(struct drm_device *dev, int level) struct drm_i915_private *dev_priv = dev->dev_private; u32 blc_pwm_ctl, reg; - if (IS_IGDNG(dev)) + if (IS_IRONLAKE(dev)) reg = BLC_PWM_CPU_CTL; else reg = BLC_PWM_CTL; @@ -74,7 +74,7 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; - if (IS_IGDNG(dev)) + if (IS_IRONLAKE(dev)) reg = BLC_PWM_PCH_CTL2; else reg = BLC_PWM_CTL; @@ -91,7 +91,7 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on) struct drm_i915_private *dev_priv = dev->dev_private; u32 pp_status, ctl_reg, status_reg; - if (IS_IGDNG(dev)) { + if (IS_IRONLAKE(dev)) { ctl_reg = PCH_PP_CONTROL; status_reg = PCH_PP_STATUS; } else { @@ -137,7 +137,7 @@ static void intel_lvds_save(struct drm_connector *connector) u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; u32 pwm_ctl_reg; - if (IS_IGDNG(dev)) { + if (IS_IRONLAKE(dev)) { pp_on_reg = PCH_PP_ON_DELAYS; pp_off_reg = PCH_PP_OFF_DELAYS; pp_ctl_reg = PCH_PP_CONTROL; @@ -174,7 +174,7 @@ static void intel_lvds_restore(struct drm_connector *connector) u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; u32 pwm_ctl_reg; - if (IS_IGDNG(dev)) { + if (IS_IRONLAKE(dev)) { pp_on_reg = PCH_PP_ON_DELAYS; pp_off_reg = PCH_PP_OFF_DELAYS; pp_ctl_reg = PCH_PP_CONTROL; @@ -297,7 +297,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, } /* full screen scale for now */ - if (IS_IGDNG(dev)) + if (IS_IRONLAKE(dev)) goto out; /* 965+ wants fuzzy fitting */ @@ -327,7 +327,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, * to register description and PRM. * Change the value here to see the borders for debugging */ - if (!IS_IGDNG(dev)) { + if (!IS_IRONLAKE(dev)) { I915_WRITE(BCLRPAT_A, 0); I915_WRITE(BCLRPAT_B, 0); } @@ -548,7 +548,7 @@ static void intel_lvds_prepare(struct drm_encoder *encoder) struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; - if (IS_IGDNG(dev)) + if (IS_IRONLAKE(dev)) reg = BLC_PWM_CPU_CTL; else reg = BLC_PWM_CTL; @@ -587,7 +587,7 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * settings. */ - if (IS_IGDNG(dev)) + if (IS_IRONLAKE(dev)) return; /* @@ -899,7 +899,7 @@ static int intel_lid_present(void) acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, - check_lid_device, &lid_present, NULL); + check_lid_device, NULL, &lid_present, NULL); return lid_present; } @@ -914,6 +914,101 @@ static int intel_lid_present(void) #endif /** + * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID + * @dev: drm device + * @connector: LVDS connector + * + * Find the reduced downclock for LVDS in EDID. + */ +static void intel_find_lvds_downclock(struct drm_device *dev, + struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *scan, *panel_fixed_mode; + int temp_downclock; + + panel_fixed_mode = dev_priv->panel_fixed_mode; + temp_downclock = panel_fixed_mode->clock; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry(scan, &connector->probed_modes, head) { + /* + * If one mode has the same resolution with the fixed_panel + * mode while they have the different refresh rate, it means + * that the reduced downclock is found for the LVDS. In such + * case we can set the different FPx0/1 to dynamically select + * between low and high frequency. + */ + if (scan->hdisplay == panel_fixed_mode->hdisplay && + scan->hsync_start == panel_fixed_mode->hsync_start && + scan->hsync_end == panel_fixed_mode->hsync_end && + scan->htotal == panel_fixed_mode->htotal && + scan->vdisplay == panel_fixed_mode->vdisplay && + scan->vsync_start == panel_fixed_mode->vsync_start && + scan->vsync_end == panel_fixed_mode->vsync_end && + scan->vtotal == panel_fixed_mode->vtotal) { + if (scan->clock < temp_downclock) { + /* + * The downclock is already found. But we + * expect to find the lower downclock. + */ + temp_downclock = scan->clock; + } + } + } + mutex_unlock(&dev->mode_config.mutex); + if (temp_downclock < panel_fixed_mode->clock) { + /* We found the downclock for LVDS. */ + dev_priv->lvds_downclock_avail = 1; + dev_priv->lvds_downclock = temp_downclock; + DRM_DEBUG_KMS("LVDS downclock is found in EDID. " + "Normal clock %dKhz, downclock %dKhz\n", + panel_fixed_mode->clock, temp_downclock); + } + return; +} + +/* + * Enumerate the child dev array parsed from VBT to check whether + * the LVDS is present. + * If it is present, return 1. + * If it is not present, return false. + * If no child dev is parsed from VBT, it assumes that the LVDS is present. + * Note: The addin_offset should also be checked for LVDS panel. + * Only when it is non-zero, it is assumed that it is present. + */ +static int lvds_is_present_in_vbt(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct child_device_config *p_child; + int i, ret; + + if (!dev_priv->child_dev_num) + return 1; + + ret = 0; + for (i = 0; i < dev_priv->child_dev_num; i++) { + p_child = dev_priv->child_dev + i; + /* + * If the device type is not LFP, continue. + * If the device type is 0x22, it is also regarded as LFP. + */ + if (p_child->device_type != DEVICE_TYPE_INT_LFP && + p_child->device_type != DEVICE_TYPE_LFP) + continue; + + /* The addin_offset should be checked. Only when it is + * non-zero, it is regarded as present. + */ + if (p_child->addin_offset) { + ret = 1; + break; + } + } + return ret; +} + +/** * intel_lvds_init - setup LVDS connectors on this device * @dev: drm device * @@ -936,21 +1031,20 @@ void intel_lvds_init(struct drm_device *dev) if (dmi_check_system(intel_no_lvds)) return; - /* Assume that any device without an ACPI LID device also doesn't - * have an integrated LVDS. We would be better off parsing the BIOS - * to get a reliable indicator, but that code isn't written yet. - * - * In the case of all-in-one desktops using LVDS that we've seen, - * they're using SDVO LVDS. + /* + * Assume LVDS is present if there's an ACPI lid device or if the + * device is present in the VBT. */ - if (!intel_lid_present()) + if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) { + DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n"); return; + } - if (IS_IGDNG(dev)) { + if (IS_IRONLAKE(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) return; if (dev_priv->edp_support) { - DRM_DEBUG("disable LVDS for eDP support\n"); + DRM_DEBUG_KMS("disable LVDS for eDP support\n"); return; } gpio = PCH_GPIOC; @@ -1023,6 +1117,7 @@ void intel_lvds_init(struct drm_device *dev) dev_priv->panel_fixed_mode = drm_mode_duplicate(dev, scan); mutex_unlock(&dev->mode_config.mutex); + intel_find_lvds_downclock(dev, connector); goto out; } mutex_unlock(&dev->mode_config.mutex); @@ -1047,8 +1142,8 @@ void intel_lvds_init(struct drm_device *dev) * correct mode. */ - /* IGDNG: FIXME if still fail, not try pipe mode now */ - if (IS_IGDNG(dev)) + /* Ironlake: FIXME if still fail, not try pipe mode now */ + if (IS_IRONLAKE(dev)) goto failed; lvds = I915_READ(LVDS); @@ -1069,7 +1164,7 @@ void intel_lvds_init(struct drm_device *dev) goto failed; out: - if (IS_IGDNG(dev)) { + if (IS_IRONLAKE(dev)) { u32 pwm; /* make sure PWM is enabled */ pwm = I915_READ(BLC_PWM_CPU_CTL2); @@ -1082,7 +1177,7 @@ out: } dev_priv->lid_notifier.notifier_call = intel_lid_notify; if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) { - DRM_DEBUG("lid notifier registration failed\n"); + DRM_DEBUG_KMS("lid notifier registration failed\n"); dev_priv->lid_notifier.notifier_call = NULL; } drm_sysfs_connector_add(connector); @@ -1093,5 +1188,6 @@ failed: if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); + drm_encoder_cleanup(encoder); kfree(intel_output); } |