diff options
Diffstat (limited to 'drivers/gpu/drm/i915')
-rw-r--r-- | drivers/gpu/drm/i915/i915_drv.c | 23 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_gem_stolen.c | 26 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_irq.c | 71 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 8 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 12 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_hdmi.c | 6 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_panel.c | 4 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 6 |
9 files changed, 97 insertions, 60 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 04f1f02c401..ec7bb0fc71b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -403,7 +403,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist); void intel_detect_pch(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct pci_dev *pch; + struct pci_dev *pch = NULL; /* In all current cases, num_pipes is equivalent to the PCH_NOP setting * (which really amounts to a PCH but no South Display). @@ -424,12 +424,9 @@ void intel_detect_pch(struct drm_device *dev) * all the ISA bridge devices and check for the first match, instead * of only checking the first one. */ - pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); - while (pch) { - struct pci_dev *curr = pch; + while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) { if (pch->vendor == PCI_VENDOR_ID_INTEL) { - unsigned short id; - id = pch->device & INTEL_PCH_DEVICE_ID_MASK; + unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK; dev_priv->pch_id = id; if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) { @@ -461,18 +458,16 @@ void intel_detect_pch(struct drm_device *dev) DRM_DEBUG_KMS("Found LynxPoint LP PCH\n"); WARN_ON(!IS_HASWELL(dev)); WARN_ON(!IS_ULT(dev)); - } else { - goto check_next; - } - pci_dev_put(pch); + } else + continue; + break; } -check_next: - pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr); - pci_dev_put(curr); } if (!pch) - DRM_DEBUG_KMS("No PCH found?\n"); + DRM_DEBUG_KMS("No PCH found.\n"); + + pci_dev_put(pch); } bool i915_semaphore_is_enabled(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index 1a24e84f231..28d24caa49f 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -82,9 +82,22 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev) r = devm_request_mem_region(dev->dev, base, dev_priv->gtt.stolen_size, "Graphics Stolen Memory"); if (r == NULL) { - DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n", - base, base + (uint32_t)dev_priv->gtt.stolen_size); - base = 0; + /* + * One more attempt but this time requesting region from + * base + 1, as we have seen that this resolves the region + * conflict with the PCI Bus. + * This is a BIOS w/a: Some BIOS wrap stolen in the root + * PCI bus, but have an off-by-one error. Hence retry the + * reservation starting from 1 instead of 0. + */ + r = devm_request_mem_region(dev->dev, base + 1, + dev_priv->gtt.stolen_size - 1, + "Graphics Stolen Memory"); + if (r == NULL) { + DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n", + base, base + (uint32_t)dev_priv->gtt.stolen_size); + base = 0; + } } return base; @@ -201,6 +214,13 @@ int i915_gem_init_stolen(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int bios_reserved = 0; +#ifdef CONFIG_INTEL_IOMMU + if (intel_iommu_gfx_mapped) { + DRM_INFO("DMAR active, disabling use of stolen memory\n"); + return 0; + } +#endif + if (dev_priv->gtt.stolen_size == 0) return 0; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9fec7117557..d554169ac59 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -618,33 +618,25 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) /* raw reads, only for fast reads of display block, no need for forcewake etc. */ #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__)) -#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__)) static bool ilk_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t status; - - if (INTEL_INFO(dev)->gen < 7) { - status = pipe == PIPE_A ? - DE_PIPEA_VBLANK : - DE_PIPEB_VBLANK; + int reg; + + if (INTEL_INFO(dev)->gen >= 8) { + status = GEN8_PIPE_VBLANK; + reg = GEN8_DE_PIPE_ISR(pipe); + } else if (INTEL_INFO(dev)->gen >= 7) { + status = DE_PIPE_VBLANK_IVB(pipe); + reg = DEISR; } else { - switch (pipe) { - default: - case PIPE_A: - status = DE_PIPEA_VBLANK_IVB; - break; - case PIPE_B: - status = DE_PIPEB_VBLANK_IVB; - break; - case PIPE_C: - status = DE_PIPEC_VBLANK_IVB; - break; - } + status = DE_PIPE_VBLANK(pipe); + reg = DEISR; } - return __raw_i915_read32(dev_priv, DEISR) & status; + return __raw_i915_read32(dev_priv, reg) & status; } static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, @@ -702,7 +694,28 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, else position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; - if (HAS_PCH_SPLIT(dev)) { + if (HAS_DDI(dev)) { + /* + * On HSW HDMI outputs there seems to be a 2 line + * difference, whereas eDP has the normal 1 line + * difference that earlier platforms have. External + * DP is unknown. For now just check for the 2 line + * difference case on all output types on HSW+. + * + * This might misinterpret the scanline counter being + * one line too far along on eDP, but that's less + * dangerous than the alternative since that would lead + * the vblank timestamp code astray when it sees a + * scanline count before vblank_start during a vblank + * interrupt. + */ + in_vbl = ilk_pipe_in_vblank_locked(dev, pipe); + if ((in_vbl && (position == vbl_start - 2 || + position == vbl_start - 1)) || + (!in_vbl && (position == vbl_end - 2 || + position == vbl_end - 1))) + position = (position + 2) % vtotal; + } else if (HAS_PCH_SPLIT(dev)) { /* * The scanline counter increments at the leading edge * of hsync, ie. it completely misses the active portion @@ -2769,10 +2782,9 @@ static void ibx_irq_postinstall(struct drm_device *dev) return; if (HAS_PCH_IBX(dev)) { - mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER | - SDE_TRANSA_FIFO_UNDER | SDE_POISON; + mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; } else { - mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT; + mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; I915_WRITE(SERR_INT, I915_READ(SERR_INT)); } @@ -2832,20 +2844,19 @@ static int ironlake_irq_postinstall(struct drm_device *dev) display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB | DE_PLANEB_FLIP_DONE_IVB | - DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB | - DE_ERR_INT_IVB); + DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB); extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | - DE_PIPEA_VBLANK_IVB); + DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB); I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); } else { display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE | DE_AUX_CHANNEL_A | - DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN | DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE | DE_POISON); - extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT; + extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT | + DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN; } dev_priv->irq_mask = ~display_mask; @@ -2961,9 +2972,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE | GEN8_PIPE_CDCLK_CRC_DONE | - GEN8_PIPE_FIFO_UNDERRUN | GEN8_DE_PIPE_IRQ_FAULT_ERRORS; - uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK; + uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | + GEN8_PIPE_FIFO_UNDERRUN; int pipe; dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked; dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked; diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index e06b9e017d6..234ac5f7bc5 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1244,6 +1244,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_panel_off(intel_dp); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4c167280949..9b8a7c7ea7f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1092,12 +1092,12 @@ static void assert_cursor(struct drm_i915_private *dev_priv, struct drm_device *dev = dev_priv->dev; bool cur_state; - if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) - cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE; - else if (IS_845G(dev) || IS_I865G(dev)) + if (IS_845G(dev) || IS_I865G(dev)) cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE; - else + else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE; + else + cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE; WARN(cur_state != state, "cursor on pipe %c assertion failure (expected %s, current %s)\n", diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 57552eb386b..2688f6d64bb 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1249,17 +1249,24 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp) DRM_DEBUG_KMS("Turn eDP power off\n"); + WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); + pp = ironlake_get_pp_control(intel_dp); /* We need to switch off panel power _and_ force vdd, for otherwise some * panels get very unhappy and cease to work. */ - pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); pp_ctrl_reg = _pp_ctrl_reg(intel_dp); I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); + intel_dp->want_panel_vdd = false; + ironlake_wait_panel_off(intel_dp); + + /* We got a reference when we enabled the VDD. */ + intel_runtime_pm_put(dev_priv); } void ironlake_edp_backlight_on(struct intel_dp *intel_dp) @@ -1639,7 +1646,7 @@ static void intel_edp_psr_enable_source(struct intel_dp *intel_dp) val |= EDP_PSR_LINK_DISABLE; I915_WRITE(EDP_PSR_CTL(dev), val | - IS_BROADWELL(dev) ? 0 : link_entry_time | + (IS_BROADWELL(dev) ? 0 : link_entry_time) | max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | EDP_PSR_ENABLE); @@ -1784,6 +1791,7 @@ static void intel_disable_dp(struct intel_encoder *encoder) /* Make sure the panel is off before trying to change the mode. But also * ensure that we have vdd while we switch off the panel. */ + ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); ironlake_edp_panel_off(intel_dp); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 6db0d9d17f4..ee3181ebcc9 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -845,7 +845,7 @@ static int hdmi_portclock_limit(struct intel_hdmi *hdmi) { struct drm_device *dev = intel_hdmi_to_dev(hdmi); - if (IS_G4X(dev)) + if (!hdmi->has_hdmi_sink || IS_G4X(dev)) return 165000; else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) return 300000; @@ -899,8 +899,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, * outputs. We also need to check that the higher clock still fits * within limits. */ - if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit - && HAS_PCH_SPLIT(dev)) { + if (pipe_config->pipe_bpp > 8*3 && intel_hdmi->has_hdmi_sink && + clock_12bpc <= portclock_limit && HAS_PCH_SPLIT(dev)) { DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n"); desired_bpp = 12*3; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 350de359123..079ea38f14d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -698,7 +698,7 @@ static void i9xx_enable_backlight(struct intel_connector *connector) freq /= 0xff; ctl = freq << 17; - if (IS_GEN2(dev) && panel->backlight.combination_mode) + if (panel->backlight.combination_mode) ctl |= BLM_LEGACY_MODE; if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm) ctl |= BLM_POLARITY_PNV; @@ -979,7 +979,7 @@ static int i9xx_setup_backlight(struct intel_connector *connector) ctl = I915_READ(BLC_PWM_CTL); - if (IS_GEN2(dev)) + if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev)) panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE; if (IS_PINEVIEW(dev)) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index d77cc81900f..e1fc35a7265 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3493,6 +3493,8 @@ static void valleyview_setup_pctx(struct drm_device *dev) u32 pcbr; int pctx_size = 24*1024; + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + pcbr = I915_READ(VLV_PCBR); if (pcbr) { /* BIOS set it up already, grab the pre-alloc'd space */ @@ -3542,8 +3544,6 @@ static void valleyview_enable_rps(struct drm_device *dev) I915_WRITE(GTFIFODBG, gtfifodbg); } - valleyview_setup_pctx(dev); - /* If VLV, Forcewake all wells, else re-direct to regular path */ gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); @@ -4395,6 +4395,8 @@ void intel_enable_gt_powersave(struct drm_device *dev) ironlake_enable_rc6(dev); intel_init_emon(dev); } else if (IS_GEN6(dev) || IS_GEN7(dev)) { + if (IS_VALLEYVIEW(dev)) + valleyview_setup_pctx(dev); /* * PCU communication is slow and this doesn't need to be * done at any specific time, so do this out of our fast path |