diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/nouveau_pm.c')
-rw-r--r-- | drivers/gpu/drm/nouveau/nouveau_pm.c | 382 |
1 files changed, 324 insertions, 58 deletions
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index a539fd25792..9064d7f1979 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -26,6 +26,7 @@ #include "nouveau_drv.h" #include "nouveau_pm.h" +#include "nouveau_gpio.h" #ifdef CONFIG_ACPI #include <linux/acpi.h> @@ -35,22 +36,95 @@ #include <linux/hwmon-sysfs.h> static int -nouveau_pm_clock_set(struct drm_device *dev, struct nouveau_pm_level *perflvl, - u8 id, u32 khz) +nouveau_pwmfan_get(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_pm_engine *pm = &dev_priv->engine.pm; - void *pre_state; + struct gpio_func gpio; + u32 divs, duty; + int ret; - if (khz == 0) - return 0; + if (!pm->pwm_get) + return -ENODEV; + + ret = nouveau_gpio_find(dev, 0, DCB_GPIO_PWM_FAN, 0xff, &gpio); + if (ret == 0) { + ret = pm->pwm_get(dev, gpio.line, &divs, &duty); + if (ret == 0) { + divs = max(divs, duty); + if (dev_priv->card_type <= NV_40 || (gpio.log[0] & 1)) + duty = divs - duty; + return (duty * 100) / divs; + } + + return nouveau_gpio_func_get(dev, gpio.func) * 100; + } + + return -ENODEV; +} + +static int +nouveau_pwmfan_set(struct drm_device *dev, int percent) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + struct gpio_func gpio; + u32 divs, duty; + int ret; + + if (!pm->pwm_set) + return -ENODEV; + + ret = nouveau_gpio_find(dev, 0, DCB_GPIO_PWM_FAN, 0xff, &gpio); + if (ret == 0) { + divs = pm->pwm_divisor; + if (pm->fan.pwm_freq) { + /*XXX: PNVIO clock more than likely... */ + divs = 135000 / pm->fan.pwm_freq; + if (dev_priv->chipset < 0xa3) + divs /= 4; + } + + duty = ((divs * percent) + 99) / 100; + if (dev_priv->card_type <= NV_40 || (gpio.log[0] & 1)) + duty = divs - duty; - pre_state = pm->clock_pre(dev, perflvl, id, khz); - if (IS_ERR(pre_state)) - return PTR_ERR(pre_state); + return pm->pwm_set(dev, gpio.line, divs, duty); + } + + return -ENODEV; +} + +static int +nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, + struct nouveau_pm_level *a, struct nouveau_pm_level *b) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + int ret; + + /*XXX: not on all boards, we should control based on temperature + * on recent boards.. or maybe on some other factor we don't + * know about? + */ + if (a->fanspeed && b->fanspeed && b->fanspeed > a->fanspeed) { + ret = nouveau_pwmfan_set(dev, perflvl->fanspeed); + if (ret && ret != -ENODEV) { + NV_ERROR(dev, "fanspeed set failed: %d\n", ret); + return ret; + } + } + + if (pm->voltage.supported && pm->voltage_set) { + if (perflvl->volt_min && b->volt_min > a->volt_min) { + ret = pm->voltage_set(dev, perflvl->volt_min); + if (ret) { + NV_ERROR(dev, "voltage set failed: %d\n", ret); + return ret; + } + } + } - if (pre_state) - pm->clock_set(dev, pre_state); return 0; } @@ -59,31 +133,24 @@ nouveau_pm_perflvl_set(struct drm_device *dev, struct nouveau_pm_level *perflvl) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + void *state; int ret; if (perflvl == pm->cur) return 0; - if (pm->voltage.supported && pm->voltage_set && perflvl->volt_min) { - ret = pm->voltage_set(dev, perflvl->volt_min); - if (ret) { - NV_ERROR(dev, "voltage_set %d failed: %d\n", - perflvl->volt_min, ret); - } - } + ret = nouveau_pm_perflvl_aux(dev, perflvl, pm->cur, perflvl); + if (ret) + return ret; - if (pm->clocks_pre) { - void *state = pm->clocks_pre(dev, perflvl); - if (IS_ERR(state)) - return PTR_ERR(state); - pm->clocks_set(dev, state); - } else - if (pm->clock_set) { - nouveau_pm_clock_set(dev, perflvl, PLL_CORE, perflvl->core); - nouveau_pm_clock_set(dev, perflvl, PLL_SHADER, perflvl->shader); - nouveau_pm_clock_set(dev, perflvl, PLL_MEMORY, perflvl->memory); - nouveau_pm_clock_set(dev, perflvl, PLL_UNK05, perflvl->unk05); - } + state = pm->clocks_pre(dev, perflvl); + if (IS_ERR(state)) + return PTR_ERR(state); + pm->clocks_set(dev, state); + + ret = nouveau_pm_perflvl_aux(dev, perflvl, perflvl, pm->cur); + if (ret) + return ret; pm->cur = perflvl; return 0; @@ -130,28 +197,9 @@ nouveau_pm_perflvl_get(struct drm_device *dev, struct nouveau_pm_level *perflvl) memset(perflvl, 0, sizeof(*perflvl)); - if (pm->clocks_get) { - ret = pm->clocks_get(dev, perflvl); - if (ret) - return ret; - } else - if (pm->clock_get) { - ret = pm->clock_get(dev, PLL_CORE); - if (ret > 0) - perflvl->core = ret; - - ret = pm->clock_get(dev, PLL_MEMORY); - if (ret > 0) - perflvl->memory = ret; - - ret = pm->clock_get(dev, PLL_SHADER); - if (ret > 0) - perflvl->shader = ret; - - ret = pm->clock_get(dev, PLL_UNK05); - if (ret > 0) - perflvl->unk05 = ret; - } + ret = pm->clocks_get(dev, perflvl); + if (ret) + return ret; if (pm->voltage.supported && pm->voltage_get) { ret = pm->voltage_get(dev); @@ -161,6 +209,10 @@ nouveau_pm_perflvl_get(struct drm_device *dev, struct nouveau_pm_level *perflvl) } } + ret = nouveau_pwmfan_get(dev); + if (ret > 0) + perflvl->fanspeed = ret; + return 0; } @@ -412,6 +464,172 @@ static SENSOR_DEVICE_ATTR(update_rate, S_IRUGO, nouveau_hwmon_show_update_rate, NULL, 0); +static ssize_t +nouveau_hwmon_show_fan0_input(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer; + struct gpio_func gpio; + u32 cycles, cur, prev; + u64 start; + int ret; + + ret = nouveau_gpio_find(dev, 0, DCB_GPIO_FAN_SENSE, 0xff, &gpio); + if (ret) + return ret; + + /* Monitor the GPIO input 0x3b for 250ms. + * When the fan spins, it changes the value of GPIO FAN_SENSE. + * We get 4 changes (0 -> 1 -> 0 -> 1 -> [...]) per complete rotation. + */ + start = ptimer->read(dev); + prev = nouveau_gpio_sense(dev, 0, gpio.line); + cycles = 0; + do { + cur = nouveau_gpio_sense(dev, 0, gpio.line); + if (prev != cur) { + cycles++; + prev = cur; + } + + usleep_range(500, 1000); /* supports 0 < rpm < 7500 */ + } while (ptimer->read(dev) - start < 250000000); + + /* interpolate to get rpm */ + return sprintf(buf, "%i\n", cycles / 4 * 4 * 60); +} +static SENSOR_DEVICE_ATTR(fan0_input, S_IRUGO, nouveau_hwmon_show_fan0_input, + NULL, 0); + +static ssize_t +nouveau_hwmon_get_pwm0(struct device *d, struct device_attribute *a, char *buf) +{ + struct drm_device *dev = dev_get_drvdata(d); + int ret; + + ret = nouveau_pwmfan_get(dev); + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", ret); +} + +static ssize_t +nouveau_hwmon_set_pwm0(struct device *d, struct device_attribute *a, + const char *buf, size_t count) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + int ret = -ENODEV; + long value; + + if (nouveau_perflvl_wr != 7777) + return -EPERM; + + if (strict_strtol(buf, 10, &value) == -EINVAL) + return -EINVAL; + + if (value < pm->fan.min_duty) + value = pm->fan.min_duty; + if (value > pm->fan.max_duty) + value = pm->fan.max_duty; + + ret = nouveau_pwmfan_set(dev, value); + if (ret) + return ret; + + return count; +} + +static SENSOR_DEVICE_ATTR(pwm0, S_IRUGO | S_IWUSR, + nouveau_hwmon_get_pwm0, + nouveau_hwmon_set_pwm0, 0); + +static ssize_t +nouveau_hwmon_get_pwm0_min(struct device *d, + struct device_attribute *a, char *buf) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + + return sprintf(buf, "%i\n", pm->fan.min_duty); +} + +static ssize_t +nouveau_hwmon_set_pwm0_min(struct device *d, struct device_attribute *a, + const char *buf, size_t count) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + long value; + + if (strict_strtol(buf, 10, &value) == -EINVAL) + return -EINVAL; + + if (value < 0) + value = 0; + + if (pm->fan.max_duty - value < 10) + value = pm->fan.max_duty - 10; + + if (value < 10) + pm->fan.min_duty = 10; + else + pm->fan.min_duty = value; + + return count; +} + +static SENSOR_DEVICE_ATTR(pwm0_min, S_IRUGO | S_IWUSR, + nouveau_hwmon_get_pwm0_min, + nouveau_hwmon_set_pwm0_min, 0); + +static ssize_t +nouveau_hwmon_get_pwm0_max(struct device *d, + struct device_attribute *a, char *buf) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + + return sprintf(buf, "%i\n", pm->fan.max_duty); +} + +static ssize_t +nouveau_hwmon_set_pwm0_max(struct device *d, struct device_attribute *a, + const char *buf, size_t count) +{ + struct drm_device *dev = dev_get_drvdata(d); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pm_engine *pm = &dev_priv->engine.pm; + long value; + + if (strict_strtol(buf, 10, &value) == -EINVAL) + return -EINVAL; + + if (value < 0) + value = 0; + + if (value - pm->fan.min_duty < 10) + value = pm->fan.min_duty + 10; + + if (value > 100) + pm->fan.max_duty = 100; + else + pm->fan.max_duty = value; + + return count; +} + +static SENSOR_DEVICE_ATTR(pwm0_max, S_IRUGO | S_IWUSR, + nouveau_hwmon_get_pwm0_max, + nouveau_hwmon_set_pwm0_max, 0); + static struct attribute *hwmon_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -420,20 +638,36 @@ static struct attribute *hwmon_attributes[] = { &sensor_dev_attr_update_rate.dev_attr.attr, NULL }; +static struct attribute *hwmon_fan_rpm_attributes[] = { + &sensor_dev_attr_fan0_input.dev_attr.attr, + NULL +}; +static struct attribute *hwmon_pwm_fan_attributes[] = { + &sensor_dev_attr_pwm0.dev_attr.attr, + &sensor_dev_attr_pwm0_min.dev_attr.attr, + &sensor_dev_attr_pwm0_max.dev_attr.attr, + NULL +}; static const struct attribute_group hwmon_attrgroup = { .attrs = hwmon_attributes, }; +static const struct attribute_group hwmon_fan_rpm_attrgroup = { + .attrs = hwmon_fan_rpm_attributes, +}; +static const struct attribute_group hwmon_pwm_fan_attrgroup = { + .attrs = hwmon_pwm_fan_attributes, +}; #endif static int nouveau_hwmon_init(struct drm_device *dev) { -#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE)) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_pm_engine *pm = &dev_priv->engine.pm; +#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE)) struct device *hwmon_dev; - int ret; + int ret = 0; if (!pm->temp_get) return -ENODEV; @@ -446,17 +680,46 @@ nouveau_hwmon_init(struct drm_device *dev) return ret; } dev_set_drvdata(hwmon_dev, dev); + + /* default sysfs entries */ ret = sysfs_create_group(&dev->pdev->dev.kobj, &hwmon_attrgroup); if (ret) { - NV_ERROR(dev, - "Unable to create hwmon sysfs file: %d\n", ret); - hwmon_device_unregister(hwmon_dev); - return ret; + if (ret) + goto error; + } + + /* if the card has a pwm fan */ + /*XXX: incorrect, need better detection for this, some boards have + * the gpio entries for pwm fan control even when there's no + * actual fan connected to it... therm table? */ + if (nouveau_pwmfan_get(dev) >= 0) { + ret = sysfs_create_group(&dev->pdev->dev.kobj, + &hwmon_pwm_fan_attrgroup); + if (ret) + goto error; + } + + /* if the card can read the fan rpm */ + if (nouveau_gpio_func_valid(dev, DCB_GPIO_FAN_SENSE)) { + ret = sysfs_create_group(&dev->pdev->dev.kobj, + &hwmon_fan_rpm_attrgroup); + if (ret) + goto error; } pm->hwmon = hwmon_dev; -#endif + + return 0; + +error: + NV_ERROR(dev, "Unable to create some hwmon sysfs files: %d\n", ret); + hwmon_device_unregister(hwmon_dev); + pm->hwmon = NULL; + return ret; +#else + pm->hwmon = NULL; return 0; +#endif } static void @@ -468,6 +731,9 @@ nouveau_hwmon_fini(struct drm_device *dev) if (pm->hwmon) { sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_attrgroup); + sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_pwm_fan_attrgroup); + sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_fan_rpm_attrgroup); + hwmon_device_unregister(pm->hwmon); } #endif |