summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/atombios.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
-rw-r--r--drivers/gpu/drm/radeon/atombios.h4785
1 files changed, 4785 insertions, 0 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
new file mode 100644
index 00000000000..cf67928abbc
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -0,0 +1,4785 @@
+/*
+ * Copyright 2006-2007 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/****************************************************************************/
+/*Portion I: Definitions shared between VBIOS and Driver */
+/****************************************************************************/
+
+#ifndef _ATOMBIOS_H
+#define _ATOMBIOS_H
+
+#define ATOM_VERSION_MAJOR 0x00020000
+#define ATOM_VERSION_MINOR 0x00000002
+
+#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
+
+/* Endianness should be specified before inclusion,
+ * default to little endian
+ */
+#ifndef ATOM_BIG_ENDIAN
+#error Endian not specified
+#endif
+
+#ifdef _H2INC
+#ifndef ULONG
+typedef unsigned long ULONG;
+#endif
+
+#ifndef UCHAR
+typedef unsigned char UCHAR;
+#endif
+
+#ifndef USHORT
+typedef unsigned short USHORT;
+#endif
+#endif
+
+#define ATOM_DAC_A 0
+#define ATOM_DAC_B 1
+#define ATOM_EXT_DAC 2
+
+#define ATOM_CRTC1 0
+#define ATOM_CRTC2 1
+
+#define ATOM_DIGA 0
+#define ATOM_DIGB 1
+
+#define ATOM_PPLL1 0
+#define ATOM_PPLL2 1
+
+#define ATOM_SCALER1 0
+#define ATOM_SCALER2 1
+
+#define ATOM_SCALER_DISABLE 0
+#define ATOM_SCALER_CENTER 1
+#define ATOM_SCALER_EXPANSION 2
+#define ATOM_SCALER_MULTI_EX 3
+
+#define ATOM_DISABLE 0
+#define ATOM_ENABLE 1
+#define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
+#define ATOM_LCD_BLON (ATOM_ENABLE+2)
+#define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
+#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
+#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
+#define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
+
+#define ATOM_BLANKING 1
+#define ATOM_BLANKING_OFF 0
+
+#define ATOM_CURSOR1 0
+#define ATOM_CURSOR2 1
+
+#define ATOM_ICON1 0
+#define ATOM_ICON2 1
+
+#define ATOM_CRT1 0
+#define ATOM_CRT2 1
+
+#define ATOM_TV_NTSC 1
+#define ATOM_TV_NTSCJ 2
+#define ATOM_TV_PAL 3
+#define ATOM_TV_PALM 4
+#define ATOM_TV_PALCN 5
+#define ATOM_TV_PALN 6
+#define ATOM_TV_PAL60 7
+#define ATOM_TV_SECAM 8
+#define ATOM_TV_CV 16
+
+#define ATOM_DAC1_PS2 1
+#define ATOM_DAC1_CV 2
+#define ATOM_DAC1_NTSC 3
+#define ATOM_DAC1_PAL 4
+
+#define ATOM_DAC2_PS2 ATOM_DAC1_PS2
+#define ATOM_DAC2_CV ATOM_DAC1_CV
+#define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
+#define ATOM_DAC2_PAL ATOM_DAC1_PAL
+
+#define ATOM_PM_ON 0
+#define ATOM_PM_STANDBY 1
+#define ATOM_PM_SUSPEND 2
+#define ATOM_PM_OFF 3
+
+/* Bit0:{=0:single, =1:dual},
+ Bit1 {=0:666RGB, =1:888RGB},
+ Bit2:3:{Grey level}
+ Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/
+
+#define ATOM_PANEL_MISC_DUAL 0x00000001
+#define ATOM_PANEL_MISC_888RGB 0x00000002
+#define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
+#define ATOM_PANEL_MISC_FPDI 0x00000010
+#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
+#define ATOM_PANEL_MISC_SPATIAL 0x00000020
+#define ATOM_PANEL_MISC_TEMPORAL 0x00000040
+#define ATOM_PANEL_MISC_API_ENABLED 0x00000080
+
+#define MEMTYPE_DDR1 "DDR1"
+#define MEMTYPE_DDR2 "DDR2"
+#define MEMTYPE_DDR3 "DDR3"
+#define MEMTYPE_DDR4 "DDR4"
+
+#define ASIC_BUS_TYPE_PCI "PCI"
+#define ASIC_BUS_TYPE_AGP "AGP"
+#define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
+
+/* Maximum size of that FireGL flag string */
+
+#define ATOM_FIREGL_FLAG_STRING "FGL" /* Flag used to enable FireGL Support */
+#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 /* sizeof( ATOM_FIREGL_FLAG_STRING ) */
+
+#define ATOM_FAKE_DESKTOP_STRING "DSK" /* Flag used to enable mobile ASIC on Desktop */
+#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
+
+#define ATOM_M54T_FLAG_STRING "M54T" /* Flag used to enable M54T Support */
+#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 /* sizeof( ATOM_M54T_FLAG_STRING ) */
+
+#define HW_ASSISTED_I2C_STATUS_FAILURE 2
+#define HW_ASSISTED_I2C_STATUS_SUCCESS 1
+
+#pragma pack(1) /* BIOS data must use byte aligment */
+
+/* Define offset to location of ROM header. */
+
+#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
+#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
+
+#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
+#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */
+#define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
+#define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
+
+/* Common header for all ROM Data tables.
+ Every table pointed _ATOM_MASTER_DATA_TABLE has this common header.
+ And the pointer actually points to this header. */
+
+typedef struct _ATOM_COMMON_TABLE_HEADER {
+ USHORT usStructureSize;
+ UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */
+ UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */
+ /*Image can't be updated, while Driver needs to carry the new table! */
+} ATOM_COMMON_TABLE_HEADER;
+
+typedef struct _ATOM_ROM_HEADER {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios,
+ atombios should init it as "ATOM", don't change the position */
+ USHORT usBiosRuntimeSegmentAddress;
+ USHORT usProtectedModeInfoOffset;
+ USHORT usConfigFilenameOffset;
+ USHORT usCRC_BlockOffset;
+ USHORT usBIOS_BootupMessageOffset;
+ USHORT usInt10Offset;
+ USHORT usPciBusDevInitCode;
+ USHORT usIoBaseAddress;
+ USHORT usSubsystemVendorID;
+ USHORT usSubsystemID;
+ USHORT usPCI_InfoOffset;
+ USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */
+ USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */
+ UCHAR ucExtendedFunctionCode;
+ UCHAR ucReserved;
+} ATOM_ROM_HEADER;
+
+/*==============================Command Table Portion==================================== */
+
+#ifdef UEFI_BUILD
+#define UTEMP USHORT
+#define USHORT void*
+#endif
+
+typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES {
+ USHORT ASIC_Init; /* Function Table, used by various SW components,latest version 1.1 */
+ USHORT GetDisplaySurfaceSize; /* Atomic Table, Used by Bios when enabling HW ICON */
+ USHORT ASIC_RegistersInit; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
+ USHORT VRAM_BlockVenderDetection; /* Atomic Table, used only by Bios */
+ USHORT DIGxEncoderControl; /* Only used by Bios */
+ USHORT MemoryControllerInit; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
+ USHORT EnableCRTCMemReq; /* Function Table,directly used by various SW components,latest version 2.1 */
+ USHORT MemoryParamAdjust; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed */
+ USHORT DVOEncoderControl; /* Function Table,directly used by various SW components,latest version 1.2 */
+ USHORT GPIOPinControl; /* Atomic Table, only used by Bios */
+ USHORT SetEngineClock; /*Function Table,directly used by various SW components,latest version 1.1 */
+ USHORT SetMemoryClock; /* Function Table,directly used by various SW components,latest version 1.1 */
+ USHORT SetPixelClock; /*Function Table,directly used by various SW components,latest version 1.2 */
+ USHORT DynamicClockGating; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
+ USHORT ResetMemoryDLL; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT ResetMemoryDevice; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT MemoryPLLInit;
+ USHORT AdjustDisplayPll; /* only used by Bios */
+ USHORT AdjustMemoryController; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT EnableASIC_StaticPwrMgt; /* Atomic Table, only used by Bios */
+ USHORT ASIC_StaticPwrMgtStatusChange; /* Obsolete, only used by Bios */
+ USHORT DAC_LoadDetection; /* Atomic Table, directly used by various SW components,latest version 1.2 */
+ USHORT LVTMAEncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.3 */
+ USHORT LCD1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT DAC1EncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT DAC2EncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT DVOOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT CV1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT GetConditionalGoldenSetting; /* only used by Bios */
+ USHORT TVEncoderControl; /* Function Table,directly used by various SW components,latest version 1.1 */
+ USHORT TMDSAEncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.3 */
+ USHORT LVDSEncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.3 */
+ USHORT TV1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT EnableScaler; /* Atomic Table, used only by Bios */
+ USHORT BlankCRTC; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT EnableCRTC; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT GetPixelClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT EnableVGA_Render; /* Function Table,directly used by various SW components,latest version 1.1 */
+ USHORT EnableVGA_Access; /* Obsolete , only used by Bios */
+ USHORT SetCRTC_Timing; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT SetCRTC_OverScan; /* Atomic Table, used by various SW components,latest version 1.1 */
+ USHORT SetCRTC_Replication; /* Atomic Table, used only by Bios */
+ USHORT SelectCRTC_Source; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT EnableGraphSurfaces; /* Atomic Table, used only by Bios */
+ USHORT UpdateCRTC_DoubleBufferRegisters;
+ USHORT LUT_AutoFill; /* Atomic Table, only used by Bios */
+ USHORT EnableHW_IconCursor; /* Atomic Table, only used by Bios */
+ USHORT GetMemoryClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT GetEngineClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT SetCRTC_UsingDTDTiming; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT ExternalEncoderControl; /* Atomic Table, directly used by various SW components,latest version 2.1 */
+ USHORT LVTMAOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT VRAM_BlockDetectionByStrap; /* Atomic Table, used only by Bios */
+ USHORT MemoryCleanUp; /* Atomic Table, only used by Bios */
+ USHORT ProcessI2cChannelTransaction; /* Function Table,only used by Bios */
+ USHORT WriteOneByteToHWAssistedI2C; /* Function Table,indirectly used by various SW components */
+ USHORT ReadHWAssistedI2CStatus; /* Atomic Table, indirectly used by various SW components */
+ USHORT SpeedFanControl; /* Function Table,indirectly used by various SW components,called from ASIC_Init */
+ USHORT PowerConnectorDetection; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT MC_Synchronization; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT ComputeMemoryEnginePLL; /* Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock */
+ USHORT MemoryRefreshConversion; /* Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock */
+ USHORT VRAM_GetCurrentInfoBlock; /* Atomic Table, used only by Bios */
+ USHORT DynamicMemorySettings; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT MemoryTraining; /* Atomic Table, used only by Bios */
+ USHORT EnableSpreadSpectrumOnPPLL; /* Atomic Table, directly used by various SW components,latest version 1.2 */
+ USHORT TMDSAOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT SetVoltage; /* Function Table,directly and/or indirectly used by various SW components,latest version 1.1 */
+ USHORT DAC1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT DAC2OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */
+ USHORT SetupHWAssistedI2CStatus; /* Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" */
+ USHORT ClockSource; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
+ USHORT MemoryDeviceInit; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
+ USHORT EnableYUV; /* Atomic Table, indirectly used by various SW components,called from EnableVGARender */
+ USHORT DIG1EncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */
+ USHORT DIG2EncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */
+ USHORT DIG1TransmitterControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */
+ USHORT DIG2TransmitterControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */
+ USHORT ProcessAuxChannelTransaction; /* Function Table,only used by Bios */
+ USHORT DPEncoderService; /* Function Table,only used by Bios */
+} ATOM_MASTER_LIST_OF_COMMAND_TABLES;
+
+/* For backward compatible */
+#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
+#define UNIPHYTransmitterControl DIG1TransmitterControl
+#define LVTMATransmitterControl DIG2TransmitterControl
+#define SetCRTC_DPM_State GetConditionalGoldenSetting
+#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
+
+typedef struct _ATOM_MASTER_COMMAND_TABLE {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
+} ATOM_MASTER_COMMAND_TABLE;
+
+/****************************************************************************/
+/* Structures used in every command table */
+/****************************************************************************/
+typedef struct _ATOM_TABLE_ATTRIBUTE {
+#if ATOM_BIG_ENDIAN
+ USHORT UpdatedByUtility:1; /* [15]=Table updated by utility flag */
+ USHORT PS_SizeInBytes:7; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
+ USHORT WS_SizeInBytes:8; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
+#else
+ USHORT WS_SizeInBytes:8; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
+ USHORT PS_SizeInBytes:7; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
+ USHORT UpdatedByUtility:1; /* [15]=Table updated by utility flag */
+#endif
+} ATOM_TABLE_ATTRIBUTE;
+
+typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS {
+ ATOM_TABLE_ATTRIBUTE sbfAccess;
+ USHORT susAccess;
+} ATOM_TABLE_ATTRIBUTE_ACCESS;
+
+/****************************************************************************/
+/* Common header for all command tables. */
+/* Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. */
+/* And the pointer actually points to this header. */
+/****************************************************************************/
+typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER {
+ ATOM_COMMON_TABLE_HEADER CommonHeader;
+ ATOM_TABLE_ATTRIBUTE TableAttribute;
+} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
+
+/****************************************************************************/
+/* Structures used by ComputeMemoryEnginePLLTable */
+/****************************************************************************/
+#define COMPUTE_MEMORY_PLL_PARAM 1
+#define COMPUTE_ENGINE_PLL_PARAM 2
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS {
+ ULONG ulClock; /* When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div */
+ UCHAR ucAction; /* 0:reserved //1:Memory //2:Engine */
+ UCHAR ucReserved; /* may expand to return larger Fbdiv later */
+ UCHAR ucFbDiv; /* return value */
+ UCHAR ucPostDiv; /* return value */
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 {
+ ULONG ulClock; /* When return, [23:0] return real clock */
+ UCHAR ucAction; /* 0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register */
+ USHORT usFbDiv; /* return Feedback value to be written to register */
+ UCHAR ucPostDiv; /* return post div to be written to register */
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
+#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
+
+#define SET_CLOCK_FREQ_MASK 0x00FFFFFF /* Clock change tables only take bit [23:0] as the requested clock value */
+#define USE_NON_BUS_CLOCK_MASK 0x01000000 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
+#define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
+#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
+#define FIRST_TIME_CHANGE_CLOCK 0x08000000 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
+#define SKIP_SW_PROGRAM_PLL 0x10000000 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
+#define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
+
+#define b3USE_NON_BUS_CLOCK_MASK 0x01 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
+#define b3USE_MEMORY_SELF_REFRESH 0x02 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
+#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
+#define b3FIRST_TIME_CHANGE_CLOCK 0x08 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
+#define b3SKIP_SW_PROGRAM_PLL 0x10 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
+
+typedef struct _ATOM_COMPUTE_CLOCK_FREQ {
+#if ATOM_BIG_ENDIAN
+ ULONG ulComputeClockFlag:8; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
+ ULONG ulClockFreq:24; /* in unit of 10kHz */
+#else
+ ULONG ulClockFreq:24; /* in unit of 10kHz */
+ ULONG ulComputeClockFlag:8; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
+#endif
+} ATOM_COMPUTE_CLOCK_FREQ;
+
+typedef struct _ATOM_S_MPLL_FB_DIVIDER {
+ USHORT usFbDivFrac;
+ USHORT usFbDiv;
+} ATOM_S_MPLL_FB_DIVIDER;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 {
+ union {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; /* Input Parameter */
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; /* Output Parameter */
+ };
+ UCHAR ucRefDiv; /* Output Parameter */
+ UCHAR ucPostDiv; /* Output Parameter */
+ UCHAR ucCntlFlag; /* Output Parameter */
+ UCHAR ucReserved;
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
+
+/* ucCntlFlag */
+#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
+#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
+#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
+
+typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock;
+ ULONG ulReserved[2];
+} DYNAMICE_MEMORY_SETTINGS_PARAMETER;
+
+typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock;
+ ULONG ulMemoryClock;
+ ULONG ulReserved;
+} DYNAMICE_ENGINE_SETTINGS_PARAMETER;
+
+/****************************************************************************/
+/* Structures used by SetEngineClockTable */
+/****************************************************************************/
+typedef struct _SET_ENGINE_CLOCK_PARAMETERS {
+ ULONG ulTargetEngineClock; /* In 10Khz unit */
+} SET_ENGINE_CLOCK_PARAMETERS;
+
+typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION {
+ ULONG ulTargetEngineClock; /* In 10Khz unit */
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+} SET_ENGINE_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structures used by SetMemoryClockTable */
+/****************************************************************************/
+typedef struct _SET_MEMORY_CLOCK_PARAMETERS {
+ ULONG ulTargetMemoryClock; /* In 10Khz unit */
+} SET_MEMORY_CLOCK_PARAMETERS;
+
+typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION {
+ ULONG ulTargetMemoryClock; /* In 10Khz unit */
+ COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+} SET_MEMORY_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structures used by ASIC_Init.ctb */
+/****************************************************************************/
+typedef struct _ASIC_INIT_PARAMETERS {
+ ULONG ulDefaultEngineClock; /* In 10Khz unit */
+ ULONG ulDefaultMemoryClock; /* In 10Khz unit */
+} ASIC_INIT_PARAMETERS;
+
+typedef struct _ASIC_INIT_PS_ALLOCATION {
+ ASIC_INIT_PARAMETERS sASICInitClocks;
+ SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; /* Caller doesn't need to init this structure */
+} ASIC_INIT_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structure used by DynamicClockGatingTable.ctb */
+/****************************************************************************/
+typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS {
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucPadding[3];
+} DYNAMIC_CLOCK_GATING_PARAMETERS;
+#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
+
+/****************************************************************************/
+/* Structure used by EnableASIC_StaticPwrMgtTable.ctb */
+/****************************************************************************/
+typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS {
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucPadding[3];
+} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
+#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by DAC_LoadDetectionTable.ctb */
+/****************************************************************************/
+typedef struct _DAC_LOAD_DETECTION_PARAMETERS {
+ USHORT usDeviceID; /* {ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} */
+ UCHAR ucDacType; /* {ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} */
+ UCHAR ucMisc; /* Valid only when table revision =1.3 and above */
+} DAC_LOAD_DETECTION_PARAMETERS;
+
+/* DAC_LOAD_DETECTION_PARAMETERS.ucMisc */
+#define DAC_LOAD_MISC_YPrPb 0x01
+
+typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION {
+ DAC_LOAD_DETECTION_PARAMETERS sDacload;
+ ULONG Reserved[2]; /* Don't set this one, allocation for EXT DAC */
+} DAC_LOAD_DETECTION_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb */
+/****************************************************************************/
+typedef struct _DAC_ENCODER_CONTROL_PARAMETERS {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ UCHAR ucDacStandard; /* See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) */
+ UCHAR ucAction; /* 0: turn off encoder */
+ /* 1: setup and turn on encoder */
+ /* 7: ATOM_ENCODER_INIT Initialize DAC */
+} DAC_ENCODER_CONTROL_PARAMETERS;
+
+#define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by DIG1EncoderControlTable */
+/* DIG2EncoderControlTable */
+/* ExternalEncoderControlTable */
+/****************************************************************************/
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ UCHAR ucConfig;
+ /* [2] Link Select: */
+ /* =0: PHY linkA if bfLane<3 */
+ /* =1: PHY linkB if bfLanes<3 */
+ /* =0: PHY linkA+B if bfLanes=3 */
+ /* [3] Transmitter Sel */
+ /* =0: UNIPHY or PCIEPHY */
+ /* =1: LVTMA */
+ UCHAR ucAction; /* =0: turn off encoder */
+ /* =1: turn on encoder */
+ UCHAR ucEncoderMode;
+ /* =0: DP encoder */
+ /* =1: LVDS encoder */
+ /* =2: DVI encoder */
+ /* =3: HDMI encoder */
+ /* =4: SDVO encoder */
+ UCHAR ucLaneNum; /* how many lanes to enable */
+ UCHAR ucReserved[2];
+} DIG_ENCODER_CONTROL_PARAMETERS;
+#define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
+#define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
+
+/* ucConfig */
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
+#define ATOM_ENCODER_CONFIG_LINKA 0x00
+#define ATOM_ENCODER_CONFIG_LINKB 0x04
+#define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
+#define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
+#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
+#define ATOM_ENCODER_CONFIG_UNIPHY 0x00
+#define ATOM_ENCODER_CONFIG_LVTMA 0x08
+#define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
+#define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
+#define ATOM_ENCODER_CONFIG_DIGB 0x80 /* VBIOS Internal use, outside SW should set this bit=0 */
+/* ucAction */
+/* ATOM_ENABLE: Enable Encoder */
+/* ATOM_DISABLE: Disable Encoder */
+
+/* ucEncoderMode */
+#define ATOM_ENCODER_MODE_DP 0
+#define ATOM_ENCODER_MODE_LVDS 1
+#define ATOM_ENCODER_MODE_DVI 2
+#define ATOM_ENCODER_MODE_HDMI 3
+#define ATOM_ENCODER_MODE_SDVO 4
+#define ATOM_ENCODER_MODE_TV 13
+#define ATOM_ENCODER_MODE_CV 14
+#define ATOM_ENCODER_MODE_CRT 15
+
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 {
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReserved1:2;
+ UCHAR ucTransmitterSel:2; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */
+ UCHAR ucLinkSel:1; /* =0: linkA/C/E =1: linkB/D/F */
+ UCHAR ucReserved:1;
+ UCHAR ucDPLinkRate:1; /* =0: 1.62Ghz, =1: 2.7Ghz */
+#else
+ UCHAR ucDPLinkRate:1; /* =0: 1.62Ghz, =1: 2.7Ghz */
+ UCHAR ucReserved:1;
+ UCHAR ucLinkSel:1; /* =0: linkA/C/E =1: linkB/D/F */
+ UCHAR ucTransmitterSel:2; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */
+ UCHAR ucReserved1:2;
+#endif
+} ATOM_DIG_ENCODER_CONFIG_V2;
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
+ UCHAR ucAction;
+ UCHAR ucEncoderMode;
+ /* =0: DP encoder */
+ /* =1: LVDS encoder */
+ /* =2: DVI encoder */
+ /* =3: HDMI encoder */
+ /* =4: SDVO encoder */
+ UCHAR ucLaneNum; /* how many lanes to enable */
+ UCHAR ucReserved[2];
+} DIG_ENCODER_CONTROL_PARAMETERS_V2;
+
+/* ucConfig */
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
+#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
+#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
+
+/****************************************************************************/
+/* Structures used by UNIPHYTransmitterControlTable */
+/* LVTMATransmitterControlTable */
+/* DVOOutputControlTable */
+/****************************************************************************/
+typedef struct _ATOM_DP_VS_MODE {
+ UCHAR ucLaneSel;
+ UCHAR ucLaneSet;
+} ATOM_DP_VS_MODE;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS {
+ union {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ USHORT usInitInfo; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */
+ ATOM_DP_VS_MODE asMode; /* DP Voltage swing mode */
+ };
+ UCHAR ucConfig;
+ /* [0]=0: 4 lane Link, */
+ /* =1: 8 lane Link ( Dual Links TMDS ) */
+ /* [1]=0: InCoherent mode */
+ /* =1: Coherent Mode */
+ /* [2] Link Select: */
+ /* =0: PHY linkA if bfLane<3 */
+ /* =1: PHY linkB if bfLanes<3 */
+ /* =0: PHY linkA+B if bfLanes=3 */
+ /* [5:4]PCIE lane Sel */
+ /* =0: lane 0~3 or 0~7 */
+ /* =1: lane 4~7 */
+ /* =2: lane 8~11 or 8~15 */
+ /* =3: lane 12~15 */
+ UCHAR ucAction; /* =0: turn off encoder */
+ /* =1: turn on encoder */
+ UCHAR ucReserved[4];
+} DIG_TRANSMITTER_CONTROL_PARAMETERS;
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+/* ucInitInfo */
+#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
+
+/* ucConfig */
+#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
+#define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
+#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
+
+#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
+#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
+
+/* ucAction */
+#define ATOM_TRANSMITTER_ACTION_DISABLE 0
+#define ATOM_TRANSMITTER_ACTION_ENABLE 1
+#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
+#define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
+#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
+#define ATOM_TRANSMITTER_ACTION_INIT 7
+#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
+#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
+#define ATOM_TRANSMITTER_ACTION_SETUP 10
+#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
+
+/* Following are used for DigTransmitterControlTable ver1.2 */
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 {
+#if ATOM_BIG_ENDIAN
+ UCHAR ucTransmitterSel:2; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
+ /* =1 Dig Transmitter 2 ( Uniphy CD ) */
+ /* =2 Dig Transmitter 3 ( Uniphy EF ) */
+ UCHAR ucReserved:1;
+ UCHAR fDPConnector:1; /* bit4=0: DP connector =1: None DP connector */
+ UCHAR ucEncoderSel:1; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
+ UCHAR ucLinkSel:1; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
+ /* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
+
+ UCHAR fCoherentMode:1; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
+ UCHAR fDualLinkConnector:1; /* bit0=1: Dual Link DVI connector */
+#else
+ UCHAR fDualLinkConnector:1; /* bit0=1: Dual Link DVI connector */
+ UCHAR fCoherentMode:1; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
+ UCHAR ucLinkSel:1; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
+ /* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
+ UCHAR ucEncoderSel:1; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
+ UCHAR fDPConnector:1; /* bit4=0: DP connector =1: None DP connector */
+ UCHAR ucReserved:1;
+ UCHAR ucTransmitterSel:2; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
+ /* =1 Dig Transmitter 2 ( Uniphy CD ) */
+ /* =2 Dig Transmitter 3 ( Uniphy EF ) */
+#endif
+} ATOM_DIG_TRANSMITTER_CONFIG_V2;
+
+/* ucConfig */
+/* Bit0 */
+#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
+
+/* Bit1 */
+#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
+
+/* Bit2 */
+#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
+
+/* Bit3 */
+#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
+
+/* Bit4 */
+#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
+
+/* Bit7:6 */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 /* AB */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 /* CD */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 /* EF */
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 {
+ union {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ USHORT usInitInfo; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */
+ ATOM_DP_VS_MODE asMode; /* DP Voltage swing mode */
+ };
+ ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
+ UCHAR ucAction; /* define as ATOM_TRANSMITER_ACTION_XXX */
+ UCHAR ucReserved[4];
+} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
+
+/****************************************************************************/
+/* Structures used by DAC1OuputControlTable */
+/* DAC2OuputControlTable */
+/* LVTMAOutputControlTable (Before DEC30) */
+/* TMDSAOutputControlTable (Before DEC30) */
+/****************************************************************************/
+typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS {
+ UCHAR ucAction; /* Possible input:ATOM_ENABLE||ATOMDISABLE */
+ /* When the display is LCD, in addition to above: */
+ /* ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| */
+ /* ATOM_LCD_SELFTEST_STOP */
+
+ UCHAR aucPadding[3]; /* padding to DWORD aligned */
+} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
+
+#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+
+#define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
+#define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by BlankCRTCTable */
+/****************************************************************************/
+typedef struct _BLANK_CRTC_PARAMETERS {
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucBlanking; /* ATOM_BLANKING or ATOM_BLANKINGOFF */
+ USHORT usBlackColorRCr;
+ USHORT usBlackColorGY;
+ USHORT usBlackColorBCb;
+} BLANK_CRTC_PARAMETERS;
+#define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by EnableCRTCTable */
+/* EnableCRTCMemReqTable */
+/* UpdateCRTC_DoubleBufferRegistersTable */
+/****************************************************************************/
+typedef struct _ENABLE_CRTC_PARAMETERS {
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucPadding[2];
+} ENABLE_CRTC_PARAMETERS;
+#define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by SetCRTC_OverScanTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_OVERSCAN_PARAMETERS {
+ USHORT usOverscanRight; /* right */
+ USHORT usOverscanLeft; /* left */
+ USHORT usOverscanBottom; /* bottom */
+ USHORT usOverscanTop; /* top */
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucPadding[3];
+} SET_CRTC_OVERSCAN_PARAMETERS;
+#define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by SetCRTC_ReplicationTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_REPLICATION_PARAMETERS {
+ UCHAR ucH_Replication; /* horizontal replication */
+ UCHAR ucV_Replication; /* vertical replication */
+ UCHAR usCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucPadding;
+} SET_CRTC_REPLICATION_PARAMETERS;
+#define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by SelectCRTC_SourceTable */
+/****************************************************************************/
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS {
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucDevice; /* ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... */
+ UCHAR ucPadding[2];
+} SELECT_CRTC_SOURCE_PARAMETERS;
+#define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
+
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 {
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucEncoderID; /* DAC1/DAC2/TVOUT/DIG1/DIG2/DVO */
+ UCHAR ucEncodeMode; /* Encoding mode, only valid when using DIG1/DIG2/DVO */
+ UCHAR ucPadding;
+} SELECT_CRTC_SOURCE_PARAMETERS_V2;
+
+/* ucEncoderID */
+/* #define ASIC_INT_DAC1_ENCODER_ID 0x00 */
+/* #define ASIC_INT_TV_ENCODER_ID 0x02 */
+/* #define ASIC_INT_DIG1_ENCODER_ID 0x03 */
+/* #define ASIC_INT_DAC2_ENCODER_ID 0x04 */
+/* #define ASIC_EXT_TV_ENCODER_ID 0x06 */
+/* #define ASIC_INT_DVO_ENCODER_ID 0x07 */
+/* #define ASIC_INT_DIG2_ENCODER_ID 0x09 */
+/* #define ASIC_EXT_DIG_ENCODER_ID 0x05 */
+
+/* ucEncodeMode */
+/* #define ATOM_ENCODER_MODE_DP 0 */
+/* #define ATOM_ENCODER_MODE_LVDS 1 */
+/* #define ATOM_ENCODER_MODE_DVI 2 */
+/* #define ATOM_ENCODER_MODE_HDMI 3 */
+/* #define ATOM_ENCODER_MODE_SDVO 4 */
+/* #define ATOM_ENCODER_MODE_TV 13 */
+/* #define ATOM_ENCODER_MODE_CV 14 */
+/* #define ATOM_ENCODER_MODE_CRT 15 */
+
+/****************************************************************************/
+/* Structures used by SetPixelClockTable */
+/* GetPixelClockTable */
+/****************************************************************************/
+/* Major revision=1., Minor revision=1 */
+typedef struct _PIXEL_CLOCK_PARAMETERS {
+ USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+ /* 0 means disable PPLL */
+ USHORT usRefDiv; /* Reference divider */
+ USHORT usFbDiv; /* feedback divider */
+ UCHAR ucPostDiv; /* post divider */
+ UCHAR ucFracFbDiv; /* fractional feedback divider */
+ UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */
+ UCHAR ucRefDivSrc; /* ATOM_PJITTER or ATO_NONPJITTER */
+ UCHAR ucCRTC; /* Which CRTC uses this Ppll */
+ UCHAR ucPadding;
+} PIXEL_CLOCK_PARAMETERS;
+
+/* Major revision=1., Minor revision=2, add ucMiscIfno */
+/* ucMiscInfo: */
+#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
+#define MISC_DEVICE_INDEX_MASK 0xF0
+#define MISC_DEVICE_INDEX_SHIFT 4
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V2 {
+ USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+ /* 0 means disable PPLL */
+ USHORT usRefDiv; /* Reference divider */
+ USHORT usFbDiv; /* feedback divider */
+ UCHAR ucPostDiv; /* post divider */
+ UCHAR ucFracFbDiv; /* fractional feedback divider */
+ UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */
+ UCHAR ucRefDivSrc; /* ATOM_PJITTER or ATO_NONPJITTER */
+ UCHAR ucCRTC; /* Which CRTC uses this Ppll */
+ UCHAR ucMiscInfo; /* Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog */
+} PIXEL_CLOCK_PARAMETERS_V2;
+
+/* Major revision=1., Minor revision=3, structure/definition change */
+/* ucEncoderMode: */
+/* ATOM_ENCODER_MODE_DP */
+/* ATOM_ENOCDER_MODE_LVDS */
+/* ATOM_ENOCDER_MODE_DVI */
+/* ATOM_ENOCDER_MODE_HDMI */
+/* ATOM_ENOCDER_MODE_SDVO */
+/* ATOM_ENCODER_MODE_TV 13 */
+/* ATOM_ENCODER_MODE_CV 14 */
+/* ATOM_ENCODER_MODE_CRT 15 */
+
+/* ucDVOConfig */
+/* #define DVO_ENCODER_CONFIG_RATE_SEL 0x01 */
+/* #define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 */
+/* #define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 */
+/* #define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c */
+/* #define DVO_ENCODER_CONFIG_LOW12BIT 0x00 */
+/* #define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 */
+/* #define DVO_ENCODER_CONFIG_24BIT 0x08 */
+
+/* ucMiscInfo: also changed, see below */
+#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
+#define PIXEL_CLOCK_MISC_VGA_MODE 0x02
+#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
+#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V3 {
+ USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+ /* 0 means disable PPLL. For VGA PPLL,make sure this value is not 0. */
+ USHORT usRefDiv; /* Reference divider */
+ USHORT usFbDiv; /* feedback divider */
+ UCHAR ucPostDiv; /* post divider */
+ UCHAR ucFracFbDiv; /* fractional feedback divider */
+ UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */
+ UCHAR ucTransmitterId; /* graphic encoder id defined in objectId.h */
+ union {
+ UCHAR ucEncoderMode; /* encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ */
+ UCHAR ucDVOConfig; /* when use DVO, need to know SDR/DDR, 12bit or 24bit */
+ };
+ UCHAR ucMiscInfo; /* bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel */
+ /* bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source */
+} PIXEL_CLOCK_PARAMETERS_V3;
+
+#define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
+#define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
+
+/****************************************************************************/
+/* Structures used by AdjustDisplayPllTable */
+/****************************************************************************/
+typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS {
+ USHORT usPixelClock;
+ UCHAR ucTransmitterID;
+ UCHAR ucEncodeMode;
+ union {
+ UCHAR ucDVOConfig; /* if DVO, need passing link rate and output 12bitlow or 24bit */
+ UCHAR ucConfig; /* if none DVO, not defined yet */
+ };
+ UCHAR ucReserved[3];
+} ADJUST_DISPLAY_PLL_PARAMETERS;
+
+#define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
+
+#define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by EnableYUVTable */
+/****************************************************************************/
+typedef struct _ENABLE_YUV_PARAMETERS {
+ UCHAR ucEnable; /* ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) */
+ UCHAR ucCRTC; /* Which CRTC needs this YUV or RGB format */
+ UCHAR ucPadding[2];
+} ENABLE_YUV_PARAMETERS;
+#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by GetMemoryClockTable */
+/****************************************************************************/
+typedef struct _GET_MEMORY_CLOCK_PARAMETERS {
+ ULONG ulReturnMemoryClock; /* current memory speed in 10KHz unit */
+} GET_MEMORY_CLOCK_PARAMETERS;
+#define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by GetEngineClockTable */
+/****************************************************************************/
+typedef struct _GET_ENGINE_CLOCK_PARAMETERS {
+ ULONG ulReturnEngineClock; /* current engine speed in 10KHz unit */
+} GET_ENGINE_CLOCK_PARAMETERS;
+#define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
+
+/****************************************************************************/
+/* Following Structures and constant may be obsolete */
+/****************************************************************************/
+/* Maxium 8 bytes,the data read in will be placed in the parameter space. */
+/* Read operaion successeful when the paramter space is non-zero, otherwise read operation failed */
+typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS {
+ USHORT usPrescale; /* Ratio between Engine clock and I2C clock */
+ USHORT usVRAMAddress; /* Adress in Frame Buffer where to pace raw EDID */
+ USHORT usStatus; /* When use output: lower byte EDID checksum, high byte hardware status */
+ /* WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte */
+ UCHAR ucSlaveAddr; /* Read from which slave */
+ UCHAR ucLineNumber; /* Read from which HW assisted line */
+} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
+#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
+
+#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
+#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
+#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
+#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
+#define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
+
+typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS {
+ USHORT usPrescale; /* Ratio between Engine clock and I2C clock */
+ USHORT usByteOffset; /* Write to which byte */
+ /* Upper portion of usByteOffset is Format of data */
+ /* 1bytePS+offsetPS */
+ /* 2bytesPS+offsetPS */
+ /* blockID+offsetPS */
+ /* blockID+offsetID */
+ /* blockID+counterID+offsetID */
+ UCHAR ucData; /* PS data1 */
+ UCHAR ucStatus; /* Status byte 1=success, 2=failure, Also is used as PS data2 */
+ UCHAR ucSlaveAddr; /* Write to which slave */
+ UCHAR ucLineNumber; /* Write from which HW assisted line */
+} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
+
+#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS {
+ USHORT usPrescale; /* Ratio between Engine clock and I2C clock */
+ UCHAR ucSlaveAddr; /* Write to which slave */
+ UCHAR ucLineNumber; /* Write from which HW assisted line */
+} SET_UP_HW_I2C_DATA_PARAMETERS;
+
+/**************************************************************************/
+#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+/****************************************************************************/
+/* Structures used by PowerConnectorDetectionTable */
+/****************************************************************************/
+typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS {
+ UCHAR ucPowerConnectorStatus; /* Used for return value 0: detected, 1:not detected */
+ UCHAR ucPwrBehaviorId;
+ USHORT usPwrBudget; /* how much power currently boot to in unit of watt */
+} POWER_CONNECTOR_DETECTION_PARAMETERS;
+
+typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION {
+ UCHAR ucPowerConnectorStatus; /* Used for return value 0: detected, 1:not detected */
+ UCHAR ucReserved;
+ USHORT usPwrBudget; /* how much power currently boot to in unit of watt */
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
+
+/****************************LVDS SS Command Table Definitions**********************/
+
+/****************************************************************************/
+/* Structures used by EnableSpreadSpectrumOnPPLLTable */
+/****************************************************************************/
+typedef struct _ENABLE_LVDS_SS_PARAMETERS {
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+ UCHAR ucSpreadSpectrumStepSize_Delay; /* bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucPadding[3];
+} ENABLE_LVDS_SS_PARAMETERS;
+
+/* ucTableFormatRevision=1,ucTableContentRevision=2 */
+typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 {
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+ UCHAR ucSpreadSpectrumStep; /* */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucSpreadSpectrumDelay;
+ UCHAR ucSpreadSpectrumRange;
+ UCHAR ucPadding;
+} ENABLE_LVDS_SS_PARAMETERS_V2;
+
+/* This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. */
+typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL {
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+ UCHAR ucSpreadSpectrumStep; /* */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucSpreadSpectrumDelay;
+ UCHAR ucSpreadSpectrumRange;
+ UCHAR ucPpll; /* ATOM_PPLL1/ATOM_PPLL2 */
+} ENABLE_SPREAD_SPECTRUM_ON_PPLL;
+
+#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+/**************************************************************************/
+
+typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION {
+ PIXEL_CLOCK_PARAMETERS sPCLKInput;
+ ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved; /* Caller doesn't need to init this portion */
+} SET_PIXEL_CLOCK_PS_ALLOCATION;
+
+#define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
+
+/****************************************************************************/
+/* Structures used by ### */
+/****************************************************************************/
+typedef struct _MEMORY_TRAINING_PARAMETERS {
+ ULONG ulTargetMemoryClock; /* In 10Khz unit */
+} MEMORY_TRAINING_PARAMETERS;
+#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
+
+/****************************LVDS and other encoder command table definitions **********************/
+
+/****************************************************************************/
+/* Structures used by LVDSEncoderControlTable (Before DCE30) */
+/* LVTMAEncoderControlTable (Before DCE30) */
+/* TMDSAEncoderControlTable (Before DCE30) */
+/****************************************************************************/
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ UCHAR ucMisc; /* bit0=0: Enable single link */
+ /* =1: Enable dual link */
+ /* Bit1=0: 666RGB */
+ /* =1: 888RGB */
+ UCHAR ucAction; /* 0: turn off encoder */
+ /* 1: setup and turn on encoder */
+} LVDS_ENCODER_CONTROL_PARAMETERS;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
+
+/* ucTableFormatRevision=1,ucTableContentRevision=2 */
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx defintions below */
+ UCHAR ucAction; /* 0: turn off encoder */
+ /* 1: setup and turn on encoder */
+ UCHAR ucTruncate; /* bit0=0: Disable truncate */
+ /* =1: Enable truncate */
+ /* bit4=0: 666RGB */
+ /* =1: 888RGB */
+ UCHAR ucSpatial; /* bit0=0: Disable spatial dithering */
+ /* =1: Enable spatial dithering */
+ /* bit4=0: 666RGB */
+ /* =1: 888RGB */
+ UCHAR ucTemporal; /* bit0=0: Disable temporal dithering */
+ /* =1: Enable temporal dithering */
+ /* bit4=0: 666RGB */
+ /* =1: 888RGB */
+ /* bit5=0: Gray level 2 */
+ /* =1: Gray level 4 */
+ UCHAR ucFRC; /* bit4=0: 25FRC_SEL pattern E */
+ /* =1: 25FRC_SEL pattern F */
+ /* bit6:5=0: 50FRC_SEL pattern A */
+ /* =1: 50FRC_SEL pattern B */
+ /* =2: 50FRC_SEL pattern C */
+ /* =3: 50FRC_SEL pattern D */
+ /* bit7=0: 75FRC_SEL pattern E */
+ /* =1: 75FRC_SEL pattern F */
+} LVDS_ENCODER_CONTROL_PARAMETERS_V2;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
+
+#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
+
+/****************************************************************************/
+/* Structures used by ### */
+/****************************************************************************/
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS {
+ UCHAR ucEnable; /* Enable or Disable External TMDS encoder */
+ UCHAR ucMisc; /* Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} */
+ UCHAR ucPadding[2];
+} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
+
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION {
+ ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */
+} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
+
+#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
+
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 {
+ ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */
+} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION {
+ DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structures used by DVOEncoderControlTable */
+/****************************************************************************/
+/* ucTableFormatRevision=1,ucTableContentRevision=3 */
+
+/* ucDVOConfig: */
+#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
+#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
+#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
+#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
+#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
+#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
+#define DVO_ENCODER_CONFIG_24BIT 0x08
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 {
+ USHORT usPixelClock;
+ UCHAR ucDVOConfig;
+ UCHAR ucAction; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
+ UCHAR ucReseved[4];
+} DVO_ENCODER_CONTROL_PARAMETERS_V3;
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for */
+/* bit1=0: non-coherent mode */
+/* =1: coherent mode */
+
+/* ========================================================================================== */
+/* Only change is here next time when changing encoder parameter definitions again! */
+#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
+
+/* ========================================================================================== */
+#define PANEL_ENCODER_MISC_DUAL 0x01
+#define PANEL_ENCODER_MISC_COHERENT 0x02
+#define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
+#define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
+
+#define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
+#define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
+#define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
+
+#define PANEL_ENCODER_TRUNCATE_EN 0x01
+#define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
+#define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
+#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
+#define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
+#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
+#define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
+#define PANEL_ENCODER_25FRC_MASK 0x10
+#define PANEL_ENCODER_25FRC_E 0x00
+#define PANEL_ENCODER_25FRC_F 0x10
+#define PANEL_ENCODER_50FRC_MASK 0x60
+#define PANEL_ENCODER_50FRC_A 0x00
+#define PANEL_ENCODER_50FRC_B 0x20
+#define PANEL_ENCODER_50FRC_C 0x40
+#define PANEL_ENCODER_50FRC_D 0x60
+#define PANEL_ENCODER_75FRC_MASK 0x80
+#define PANEL_ENCODER_75FRC_E 0x00
+#define PANEL_ENCODER_75FRC_F 0x80
+
+/****************************************************************************/
+/* Structures used by SetVoltageTable */
+/****************************************************************************/
+#define SET_VOLTAGE_TYPE_ASIC_VDDC 1
+#define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
+#define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
+#define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
+#define SET_VOLTAGE_INIT_MODE 5
+#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 /* Gets the Max. voltage for the soldered Asic */
+
+#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
+
+#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
+#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
+#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
+
+typedef struct _SET_VOLTAGE_PARAMETERS {
+ UCHAR ucVoltageType; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
+ UCHAR ucVoltageMode; /* To set all, to set source A or source B or ... */
+ UCHAR ucVoltageIndex; /* An index to tell which voltage level */
+ UCHAR ucReserved;
+} SET_VOLTAGE_PARAMETERS;
+
+typedef struct _SET_VOLTAGE_PARAMETERS_V2 {
+ UCHAR ucVoltageType; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
+ UCHAR ucVoltageMode; /* Not used, maybe use for state machine for differen power mode */
+ USHORT usVoltageLevel; /* real voltage level */
+} SET_VOLTAGE_PARAMETERS_V2;
+
+typedef struct _SET_VOLTAGE_PS_ALLOCATION {
+ SET_VOLTAGE_PARAMETERS sASICSetVoltage;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} SET_VOLTAGE_PS_ALLOCATION;
+
+/****************************************************************************/
+/* Structures used by TVEncoderControlTable */
+/****************************************************************************/
+typedef struct _TV_ENCODER_CONTROL_PARAMETERS {
+ USHORT usPixelClock; /* in 10KHz; for bios convenient */
+ UCHAR ucTvStandard; /* See definition "ATOM_TV_NTSC ..." */
+ UCHAR ucAction; /* 0: turn off encoder */
+ /* 1: setup and turn on encoder */
+} TV_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION {
+ TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Don't set this one */
+} TV_ENCODER_CONTROL_PS_ALLOCATION;
+
+/* ==============================Data Table Portion==================================== */
+
+#ifdef UEFI_BUILD
+#define UTEMP USHORT
+#define USHORT void*
+#endif
+
+/****************************************************************************/
+/* Structure used in Data.mtb */
+/****************************************************************************/
+typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES {
+ USHORT UtilityPipeLine; /* Offest for the utility to get parser info,Don't change this position! */
+ USHORT MultimediaCapabilityInfo; /* Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios */
+ USHORT MultimediaConfigInfo; /* Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios */
+ USHORT StandardVESA_Timing; /* Only used by Bios */
+ USHORT FirmwareInfo; /* Shared by various SW components,latest version 1.4 */
+ USHORT DAC_Info; /* Will be obsolete from R600 */
+ USHORT LVDS_Info; /* Shared by various SW components,latest version 1.1 */
+ USHORT TMDS_Info; /* Will be obsolete from R600 */
+ USHORT AnalogTV_Info; /* Shared by various SW components,latest version 1.1 */
+ USHORT SupportedDevicesInfo; /* Will be obsolete from R600 */
+ USHORT GPIO_I2C_Info; /* Shared by various SW components,latest version 1.2 will be used from R600 */
+ USHORT VRAM_UsageByFirmware; /* Shared by various SW components,latest version 1.3 will be used from R600 */
+ USHORT GPIO_Pin_LUT; /* Shared by various SW components,latest version 1.1 */
+ USHORT VESA_ToInternalModeLUT; /* Only used by Bios */
+ USHORT ComponentVideoInfo; /* Shared by various SW components,latest version 2.1 will be used from R600 */
+ USHORT PowerPlayInfo; /* Shared by various SW components,latest version 2.1,new design from R600 */
+ USHORT CompassionateData; /* Will be obsolete from R600 */
+ USHORT SaveRestoreInfo; /* Only used by Bios */
+ USHORT PPLL_SS_Info; /* Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info */
+ USHORT OemInfo; /* Defined and used by external SW, should be obsolete soon */
+ USHORT XTMDS_Info; /* Will be obsolete from R600 */
+ USHORT MclkSS_Info; /* Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used */
+ USHORT Object_Header; /* Shared by various SW components,latest version 1.1 */
+ USHORT IndirectIOAccess; /* Only used by Bios,this table position can't change at all!! */
+ USHORT MC_InitParameter; /* Only used by command table */
+ USHORT ASIC_VDDC_Info; /* Will be obsolete from R600 */
+ USHORT ASIC_InternalSS_Info; /* New tabel name from R600, used to be called "ASIC_MVDDC_Info" */
+ USHORT TV_VideoMode; /* Only used by command table */
+ USHORT VRAM_Info; /* Only used by command table, latest version 1.3 */
+ USHORT MemoryTrainingInfo; /* Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 */
+ USHORT IntegratedSystemInfo; /* Shared by various SW components */
+ USHORT ASIC_ProfilingInfo; /* New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 */
+ USHORT VoltageObjectInfo; /* Shared by various SW components, latest version 1.1 */
+ USHORT PowerSourceInfo; /* Shared by various SW components, latest versoin 1.1 */
+} ATOM_MASTER_LIST_OF_DATA_TABLES;
+
+#ifdef UEFI_BUILD
+#define USHORT UTEMP
+#endif
+
+typedef struct _ATOM_MASTER_DATA_TABLE {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
+} ATOM_MASTER_DATA_TABLE;
+
+/****************************************************************************/
+/* Structure used in MultimediaCapabilityInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulSignature; /* HW info table signature string "$ATI" */
+ UCHAR ucI2C_Type; /* I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) */
+ UCHAR ucTV_OutInfo; /* Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) */
+ UCHAR ucVideoPortInfo; /* Provides the video port capabilities */
+ UCHAR ucHostPortInfo; /* Provides host port configuration information */
+} ATOM_MULTIMEDIA_CAPABILITY_INFO;
+
+/****************************************************************************/
+/* Structure used in MultimediaConfigInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulSignature; /* MM info table signature sting "$MMT" */
+ UCHAR ucTunerInfo; /* Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) */
+ UCHAR ucAudioChipInfo; /* List the audio chip type (3:0) product type (4) and OEM revision (7:5) */
+ UCHAR ucProductID; /* Defines as OEM ID or ATI board ID dependent on product type setting */
+ UCHAR ucMiscInfo1; /* Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) */
+ UCHAR ucMiscInfo2; /* I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) */
+ UCHAR ucMiscInfo3; /* Video Decoder Type (3:0) Video In Standard/Crystal (7:4) */
+ UCHAR ucMiscInfo4; /* Video Decoder Host Config (2:0) reserved (7:3) */
+ UCHAR ucVideoInput0Info; /* Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+ UCHAR ucVideoInput1Info; /* Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+ UCHAR ucVideoInput2Info; /* Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+ UCHAR ucVideoInput3Info; /* Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+ UCHAR ucVideoInput4Info; /* Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+} ATOM_MULTIMEDIA_CONFIG_INFO;
+
+/****************************************************************************/
+/* Structures used in FirmwareInfoTable */
+/****************************************************************************/
+
+/* usBIOSCapability Defintion: */
+/* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
+/* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
+/* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
+/* Others: Reserved */
+#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
+#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
+#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
+#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008
+#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010
+#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
+#define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
+#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
+#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
+#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
+#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
+#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
+
+#ifndef _H2INC
+
+/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
+typedef struct _ATOM_FIRMWARE_CAPABILITY {
+#if ATOM_BIG_ENDIAN
+ USHORT Reserved:3;
+ USHORT HyperMemory_Size:4;
+ USHORT HyperMemory_Support:1;
+ USHORT PPMode_Assigned:1;
+ USHORT WMI_SUPPORT:1;
+ USHORT GPUControlsBL:1;
+ USHORT EngineClockSS_Support:1;
+ USHORT MemoryClockSS_Support:1;
+ USHORT ExtendedDesktopSupport:1;
+ USHORT DualCRTC_Support:1;
+ USHORT FirmwarePosted:1;
+#else
+ USHORT FirmwarePosted:1;
+ USHORT DualCRTC_Support:1;
+ USHORT ExtendedDesktopSupport:1;
+ USHORT MemoryClockSS_Support:1;
+ USHORT EngineClockSS_Support:1;
+ USHORT GPUControlsBL:1;
+ USHORT WMI_SUPPORT:1;
+ USHORT PPMode_Assigned:1;
+ USHORT HyperMemory_Support:1;
+ USHORT HyperMemory_Size:4;
+ USHORT Reserved:3;
+#endif
+} ATOM_FIRMWARE_CAPABILITY;
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
+ ATOM_FIRMWARE_CAPABILITY sbfAccess;
+ USHORT susAccess;
+} ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#else
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
+ USHORT susAccess;
+} ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#endif
+
+typedef struct _ATOM_FIRMWARE_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; /* In 10Khz unit */
+ ULONG ulDefaultMemoryClock; /* In 10Khz unit */
+ ULONG ulDriverTargetEngineClock; /* In 10Khz unit */
+ ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */
+ ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */
+ ULONG ulASICMaxEngineClock; /* In 10Khz unit */
+ ULONG ulASICMaxMemoryClock; /* In 10Khz unit */
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucPadding[3]; /* Don't use them */
+ ULONG aulReservedForBIOS[3]; /* Don't use them */
+ USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */
+ USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */
+ USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinPixelClockPLL_Output; /* In 10Khz unit, the definitions above can't change!!! */
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; /* In 10Khz unit */
+ USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */
+ UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */
+ UCHAR ucDesign_ID; /* Indicate what is the board design */
+ UCHAR ucMemoryModule_ID; /* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_2 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; /* In 10Khz unit */
+ ULONG ulDefaultMemoryClock; /* In 10Khz unit */
+ ULONG ulDriverTargetEngineClock; /* In 10Khz unit */
+ ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */
+ ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */
+ ULONG ulASICMaxEngineClock; /* In 10Khz unit */
+ ULONG ulASICMaxMemoryClock; /* In 10Khz unit */
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ UCHAR ucPadding[2]; /* Don't use them */
+ ULONG aulReservedForBIOS[2]; /* Don't use them */
+ ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */
+ USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */
+ USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; /* In 10Khz unit */
+ USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */
+ UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */
+ UCHAR ucDesign_ID; /* Indicate what is the board design */
+ UCHAR ucMemoryModule_ID; /* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_2;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_3 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; /* In 10Khz unit */
+ ULONG ulDefaultMemoryClock; /* In 10Khz unit */
+ ULONG ulDriverTargetEngineClock; /* In 10Khz unit */
+ ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */
+ ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */
+ ULONG ulASICMaxEngineClock; /* In 10Khz unit */
+ ULONG ulASICMaxMemoryClock; /* In 10Khz unit */
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ UCHAR ucPadding[2]; /* Don't use them */
+ ULONG aulReservedForBIOS; /* Don't use them */
+ ULONG ul3DAccelerationEngineClock; /* In 10Khz unit */
+ ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */
+ USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */
+ USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; /* In 10Khz unit */
+ USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */
+ UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */
+ UCHAR ucDesign_ID; /* Indicate what is the board design */
+ UCHAR ucMemoryModule_ID; /* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_3;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_4 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; /* In 10Khz unit */
+ ULONG ulDefaultMemoryClock; /* In 10Khz unit */
+ ULONG ulDriverTargetEngineClock; /* In 10Khz unit */
+ ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */
+ ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */
+ ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */
+ ULONG ulASICMaxEngineClock; /* In 10Khz unit */
+ ULONG ulASICMaxMemoryClock; /* In 10Khz unit */
+ UCHAR ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ USHORT usBootUpVDDCVoltage; /* In MV unit */
+ USHORT usLcdMinPixelClockPLL_Output; /* In MHz unit */
+ USHORT usLcdMaxPixelClockPLL_Output; /* In MHz unit */
+ ULONG ul3DAccelerationEngineClock; /* In 10Khz unit */
+ ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */
+ USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */
+ USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */
+ USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usReferenceClock; /* In 10Khz unit */
+ USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */
+ UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */
+ UCHAR ucDesign_ID; /* Indicate what is the board design */
+ UCHAR ucMemoryModule_ID; /* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_4;
+
+#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4
+
+/****************************************************************************/
+/* Structures used in IntegratedSystemInfoTable */
+/****************************************************************************/
+#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
+#define IGP_CAP_FLAG_AC_CARD 0x4
+#define IGP_CAP_FLAG_SDVO_CARD 0x8
+#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock; /* in 10kHz unit */
+ ULONG ulBootUpMemoryClock; /* in 10kHz unit */
+ ULONG ulMaxSystemMemoryClock; /* in 10kHz unit */
+ ULONG ulMinSystemMemoryClock; /* in 10kHz unit */
+ UCHAR ucNumberOfCyclesInPeriodHi;
+ UCHAR ucLCDTimingSel; /* =0:not valid.!=0 sel this timing descriptor from LCD EDID. */
+ USHORT usReserved1;
+ USHORT usInterNBVoltageLow; /* An intermidiate PMW value to set the voltage */
+ USHORT usInterNBVoltageHigh; /* Another intermidiate PMW value to set the voltage */
+ ULONG ulReserved[2];
+
+ USHORT usFSBClock; /* In MHz unit */
+ USHORT usCapabilityFlag; /* Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable */
+ /* Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card */
+ /* Bit[4]==1: P/2 mode, ==0: P/1 mode */
+ USHORT usPCIENBCfgReg7; /* bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal */
+ USHORT usK8MemoryClock; /* in MHz unit */
+ USHORT usK8SyncStartDelay; /* in 0.01 us unit */
+ USHORT usK8DataReturnTime; /* in 0.01 us unit */
+ UCHAR ucMaxNBVoltage;
+ UCHAR ucMinNBVoltage;
+ UCHAR ucMemoryType; /* [7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved */
+ UCHAR ucNumberOfCyclesInPeriod; /* CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod */
+ UCHAR ucStartingPWM_HighTime; /* CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime */
+ UCHAR ucHTLinkWidth; /* 16 bit vs. 8 bit */
+ UCHAR ucMaxNBVoltageHigh;
+ UCHAR ucMinNBVoltageHigh;
+} ATOM_INTEGRATED_SYSTEM_INFO;
+
+/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
+ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock
+ For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
+ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+ For AMD IGP,for now this can be 0
+ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+ For AMD IGP,for now this can be 0
+
+usFSBClock: For Intel IGP,it's FSB Freq
+ For AMD IGP,it's HT Link Speed
+
+usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200
+usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation
+usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation
+
+VC:Voltage Control
+ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
+ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
+
+ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+*/
+
+/*
+The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
+Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
+The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
+
+SW components can access the IGP system infor structure in the same way as before
+*/
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock; /* in 10kHz unit */
+ ULONG ulReserved1[2]; /* must be 0x0 for the reserved */
+ ULONG ulBootUpUMAClock; /* in 10kHz unit */
+ ULONG ulBootUpSidePortClock; /* in 10kHz unit */
+ ULONG ulMinSidePortClock; /* in 10kHz unit */
+ ULONG ulReserved2[6]; /* must be 0x0 for the reserved */
+ ULONG ulSystemConfig; /* see explanation below */
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulDDISlot1Config;
+ ULONG ulDDISlot2Config;
+ UCHAR ucMemoryType; /* [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved */
+ UCHAR ucUMAChannelNumber;
+ UCHAR ucDockingPinBit;
+ UCHAR ucDockingPinPolarity;
+ ULONG ulDockingPinCFGInfo;
+ ULONG ulCPUCapInfo;
+ USHORT usNumberOfCyclesInPeriod;
+ USHORT usMaxNBVoltage;
+ USHORT usMinNBVoltage;
+ USHORT usBootUpNBVoltage;
+ ULONG ulHTLinkFreq; /* in 10Khz */
+ USHORT usMinHTLinkWidth;
+ USHORT usMaxHTLinkWidth;
+ USHORT usUMASyncStartDelay;
+ USHORT usUMADataReturnTime;
+ USHORT usLinkStatusZeroTime;
+ USHORT usReserved;
+ ULONG ulHighVoltageHTLinkFreq; /* in 10Khz */
+ ULONG ulLowVoltageHTLinkFreq; /* in 10Khz */
+ USHORT usMaxUpStreamHTLinkWidth;
+ USHORT usMaxDownStreamHTLinkWidth;
+ USHORT usMinUpStreamHTLinkWidth;
+ USHORT usMinDownStreamHTLinkWidth;
+ ULONG ulReserved3[97]; /* must be 0x0 */
+} ATOM_INTEGRATED_SYSTEM_INFO_V2;
+
+/*
+ulBootUpEngineClock: Boot-up Engine Clock in 10Khz;
+ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
+ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
+
+ulSystemConfig:
+Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
+Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
+ =0: system boots up at driver control state. Power state depends on PowerPlay table.
+Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
+Bit[3]=1: Only one power state(Performance) will be supported.
+ =0: Multiple power states supported from PowerPlay table.
+Bit[4]=1: CLMC is supported and enabled on current system.
+ =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
+Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
+ =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
+Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
+ =0: Voltage settings is determined by powerplay table.
+Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
+ =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
+
+ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
+
+ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
+ [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;
+
+ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
+ [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
+ [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
+ [15:8] - Lane configuration attribute;
+ [23:16]- Connector type, possible value:
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A
+ CONNECTOR_OBJECT_ID_DISPLAYPORT
+ [31:24]- Reserved
+
+ulDDISlot2Config: Same as Slot1.
+ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
+For IGP, Hypermemory is the only memory type showed in CCC.
+
+ucUMAChannelNumber: how many channels for the UMA;
+
+ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
+ucDockingPinBit: which bit in this register to read the pin status;
+ucDockingPinPolarity:Polarity of the pin when docked;
+
+ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0
+
+usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
+usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
+usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
+ GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
+ PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
+ GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
+usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
+
+ulHTLinkFreq: Bootup HT link Frequency in 10Khz.
+usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
+ If CDLW enabled, both upstream and downstream width should be the same during bootup.
+usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
+ If CDLW enabled, both upstream and downstream width should be the same during bootup.
+
+usUMASyncStartDelay: Memory access latency, required for watermark calculation
+usUMADataReturnTime: Memory access latency, required for watermark calculation
+usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
+for Griffin or Greyhound. SBIOS needs to convert to actual time by:
+ if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
+ if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
+ if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
+ if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
+
+ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
+ This must be less than or equal to ulHTLinkFreq(bootup frequency).
+ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
+ This must be less than or equal to ulHighVoltageHTLinkFreq.
+
+usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
+usMaxDownStreamHTLinkWidth: same as above.
+usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
+usMinDownStreamHTLinkWidth: same as above.
+*/
+
+#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
+#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
+#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
+#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
+#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
+#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
+#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
+#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
+
+#define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
+
+#define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
+#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
+#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
+#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
+#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
+#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
+
+#define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
+#define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
+#define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
+
+#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
+
+#define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
+#define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
+#define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
+#define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
+#define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
+#define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
+#define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
+#define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
+#define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
+#define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
+#define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
+#define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
+#define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
+#define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
+
+/* define ASIC internal encoder id ( bit vector ) */
+#define ASIC_INT_DAC1_ENCODER_ID 0x00
+#define ASIC_INT_TV_ENCODER_ID 0x02
+#define ASIC_INT_DIG1_ENCODER_ID 0x03
+#define ASIC_INT_DAC2_ENCODER_ID 0x04
+#define ASIC_EXT_TV_ENCODER_ID 0x06
+#define ASIC_INT_DVO_ENCODER_ID 0x07
+#define ASIC_INT_DIG2_ENCODER_ID 0x09
+#define ASIC_EXT_DIG_ENCODER_ID 0x05
+
+/* define Encoder attribute */
+#define ATOM_ANALOG_ENCODER 0
+#define ATOM_DIGITAL_ENCODER 1
+
+#define ATOM_DEVICE_CRT1_INDEX 0x00000000
+#define ATOM_DEVICE_LCD1_INDEX 0x00000001
+#define ATOM_DEVICE_TV1_INDEX 0x00000002
+#define ATOM_DEVICE_DFP1_INDEX 0x00000003
+#define ATOM_DEVICE_CRT2_INDEX 0x00000004
+#define ATOM_DEVICE_LCD2_INDEX 0x00000005
+#define ATOM_DEVICE_TV2_INDEX 0x00000006
+#define ATOM_DEVICE_DFP2_INDEX 0x00000007
+#define ATOM_DEVICE_CV_INDEX 0x00000008
+#define ATOM_DEVICE_DFP3_INDEX 0x00000009
+#define ATOM_DEVICE_DFP4_INDEX 0x0000000A
+#define ATOM_DEVICE_DFP5_INDEX 0x0000000B
+#define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
+#define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
+#define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
+#define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1)
+
+#define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
+
+#define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX)
+#define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX)
+#define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX)
+#define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX)
+#define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX)
+#define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX)
+#define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX)
+#define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX)
+#define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX)
+#define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX)
+#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
+#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX)
+
+#define ATOM_DEVICE_CRT_SUPPORT \
+ (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
+#define ATOM_DEVICE_DFP_SUPPORT \
+ (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | \
+ ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | \
+ ATOM_DEVICE_DFP5_SUPPORT)
+#define ATOM_DEVICE_TV_SUPPORT \
+ (ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT)
+#define ATOM_DEVICE_LCD_SUPPORT \
+ (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
+
+#define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
+#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
+#define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
+#define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
+#define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
+#define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
+#define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
+#define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
+#define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
+#define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
+#define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
+#define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
+#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
+
+#define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
+#define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
+#define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
+#define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
+#define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
+#define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
+
+#define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
+
+#define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
+#define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
+
+#define ATOM_DEVICE_I2C_ID_MASK 0x00000070
+#define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
+#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
+#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
+#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 /* For IGP RS600 */
+#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 /* For IGP RS690 */
+
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
+#define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
+#define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
+
+/* usDeviceSupport: */
+/* Bits0 = 0 - no CRT1 support= 1- CRT1 is supported */
+/* Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported */
+/* Bit 2 = 0 - no TV1 support= 1- TV1 is supported */
+/* Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported */
+/* Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported */
+/* Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported */
+/* Bit 6 = 0 - no TV2 support= 1- TV2 is supported */
+/* Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported */
+/* Bit 8 = 0 - no CV support= 1- CV is supported */
+/* Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported */
+/* Byte1 (Supported Device Info) */
+/* Bit 0 = = 0 - no CV support= 1- CV is supported */
+/* */
+/* */
+
+/* ucI2C_ConfigID */
+/* [7:0] - I2C LINE Associate ID */
+/* = 0 - no I2C */
+/* [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection) */
+/* = 0, [6:0]=SW assisted I2C ID */
+/* [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use */
+/* = 2, HW engine for Multimedia use */
+/* = 3-7 Reserved for future I2C engines */
+/* [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C */
+
+typedef struct _ATOM_I2C_ID_CONFIG {
+#if ATOM_BIG_ENDIAN
+ UCHAR bfHW_Capable:1;
+ UCHAR bfHW_EngineID:3;
+ UCHAR bfI2C_LineMux:4;
+#else
+ UCHAR bfI2C_LineMux:4;
+ UCHAR bfHW_EngineID:3;
+ UCHAR bfHW_Capable:1;
+#endif
+} ATOM_I2C_ID_CONFIG;
+
+typedef union _ATOM_I2C_ID_CONFIG_ACCESS {
+ ATOM_I2C_ID_CONFIG sbfAccess;
+ UCHAR ucAccess;
+} ATOM_I2C_ID_CONFIG_ACCESS;
+
+/****************************************************************************/
+/* Structure used in GPIO_I2C_InfoTable */
+/****************************************************************************/
+typedef struct _ATOM_GPIO_I2C_ASSIGMENT {
+ USHORT usClkMaskRegisterIndex;
+ USHORT usClkEnRegisterIndex;
+ USHORT usClkY_RegisterIndex;
+ USHORT usClkA_RegisterIndex;
+ USHORT usDataMaskRegisterIndex;
+ USHORT usDataEnRegisterIndex;
+ USHORT usDataY_RegisterIndex;
+ USHORT usDataA_RegisterIndex;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+ UCHAR ucClkMaskShift;
+ UCHAR ucClkEnShift;
+ UCHAR ucClkY_Shift;
+ UCHAR ucClkA_Shift;
+ UCHAR ucDataMaskShift;
+ UCHAR ucDataEnShift;
+ UCHAR ucDataY_Shift;
+ UCHAR ucDataA_Shift;
+ UCHAR ucReserved1;
+ UCHAR ucReserved2;
+} ATOM_GPIO_I2C_ASSIGMENT;
+
+typedef struct _ATOM_GPIO_I2C_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
+} ATOM_GPIO_I2C_INFO;
+
+/****************************************************************************/
+/* Common Structure used in other structures */
+/****************************************************************************/
+
+#ifndef _H2INC
+
+/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
+typedef struct _ATOM_MODE_MISC_INFO {
+#if ATOM_BIG_ENDIAN
+ USHORT Reserved:6;
+ USHORT RGB888:1;
+ USHORT DoubleClock:1;
+ USHORT Interlace:1;
+ USHORT CompositeSync:1;
+ USHORT V_ReplicationBy2:1;
+ USHORT H_ReplicationBy2:1;
+ USHORT VerticalCutOff:1;
+ USHORT VSyncPolarity:1; /* 0=Active High, 1=Active Low */
+ USHORT HSyncPolarity:1; /* 0=Active High, 1=Active Low */
+ USHORT HorizontalCutOff:1;
+#else
+ USHORT HorizontalCutOff:1;
+ USHORT HSyncPolarity:1; /* 0=Active High, 1=Active Low */
+ USHORT VSyncPolarity:1; /* 0=Active High, 1=Active Low */
+ USHORT VerticalCutOff:1;
+ USHORT H_ReplicationBy2:1;
+ USHORT V_ReplicationBy2:1;
+ USHORT CompositeSync:1;
+ USHORT Interlace:1;
+ USHORT DoubleClock:1;
+ USHORT RGB888:1;
+ USHORT Reserved:6;
+#endif
+} ATOM_MODE_MISC_INFO;
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS {
+ ATOM_MODE_MISC_INFO sbfAccess;
+ USHORT usAccess;
+} ATOM_MODE_MISC_INFO_ACCESS;
+
+#else
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS {
+ USHORT usAccess;
+} ATOM_MODE_MISC_INFO_ACCESS;
+
+#endif
+
+/* usModeMiscInfo- */
+#define ATOM_H_CUTOFF 0x01
+#define ATOM_HSYNC_POLARITY 0x02 /* 0=Active High, 1=Active Low */
+#define ATOM_VSYNC_POLARITY 0x04 /* 0=Active High, 1=Active Low */
+#define ATOM_V_CUTOFF 0x08
+#define ATOM_H_REPLICATIONBY2 0x10
+#define ATOM_V_REPLICATIONBY2 0x20
+#define ATOM_COMPOSITESYNC 0x40
+#define ATOM_INTERLACE 0x80
+#define ATOM_DOUBLE_CLOCK_MODE 0x100
+#define ATOM_RGB888_MODE 0x200
+
+/* usRefreshRate- */
+#define ATOM_REFRESH_43 43
+#define ATOM_REFRESH_47 47
+#define ATOM_REFRESH_56 56
+#define ATOM_REFRESH_60 60
+#define ATOM_REFRESH_65 65
+#define ATOM_REFRESH_70 70
+#define ATOM_REFRESH_72 72
+#define ATOM_REFRESH_75 75
+#define ATOM_REFRESH_85 85
+
+/* ATOM_MODE_TIMING data are exactly the same as VESA timing data. */
+/* Translation from EDID to ATOM_MODE_TIMING, use the following formula. */
+/* */
+/* VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK */
+/* = EDID_HA + EDID_HBL */
+/* VESA_HDISP = VESA_ACTIVE = EDID_HA */
+/* VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH */
+/* = EDID_HA + EDID_HSO */
+/* VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW */
+/* VESA_BORDER = EDID_BORDER */
+
+/****************************************************************************/
+/* Structure used in SetCRTC_UsingDTDTimingTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS {
+ USHORT usH_Size;
+ USHORT usH_Blanking_Time;
+ USHORT usV_Size;
+ USHORT usV_Blanking_Time;
+ USHORT usH_SyncOffset;
+ USHORT usH_SyncWidth;
+ USHORT usV_SyncOffset;
+ USHORT usV_SyncWidth;
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucH_Border; /* From DFP EDID */
+ UCHAR ucV_Border;
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucPadding[3];
+} SET_CRTC_USING_DTD_TIMING_PARAMETERS;
+
+/****************************************************************************/
+/* Structure used in SetCRTC_TimingTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_TIMING_PARAMETERS {
+ USHORT usH_Total; /* horizontal total */
+ USHORT usH_Disp; /* horizontal display */
+ USHORT usH_SyncStart; /* horozontal Sync start */
+ USHORT usH_SyncWidth; /* horizontal Sync width */
+ USHORT usV_Total; /* vertical total */
+ USHORT usV_Disp; /* vertical display */
+ USHORT usV_SyncStart; /* vertical Sync start */
+ USHORT usV_SyncWidth; /* vertical Sync width */
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */
+ UCHAR ucOverscanRight; /* right */
+ UCHAR ucOverscanLeft; /* left */
+ UCHAR ucOverscanBottom; /* bottom */
+ UCHAR ucOverscanTop; /* top */
+ UCHAR ucReserved;
+} SET_CRTC_TIMING_PARAMETERS;
+#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
+
+/****************************************************************************/
+/* Structure used in StandardVESA_TimingTable */
+/* AnalogTV_InfoTable */
+/* ComponentVideoInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MODE_TIMING {
+ USHORT usCRTC_H_Total;
+ USHORT usCRTC_H_Disp;
+ USHORT usCRTC_H_SyncStart;
+ USHORT usCRTC_H_SyncWidth;
+ USHORT usCRTC_V_Total;
+ USHORT usCRTC_V_Disp;
+ USHORT usCRTC_V_SyncStart;
+ USHORT usCRTC_V_SyncWidth;
+ USHORT usPixelClock; /* in 10Khz unit */
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ USHORT usCRTC_OverscanRight;
+ USHORT usCRTC_OverscanLeft;
+ USHORT usCRTC_OverscanBottom;
+ USHORT usCRTC_OverscanTop;
+ USHORT usReserve;
+ UCHAR ucInternalModeNumber;
+ UCHAR ucRefreshRate;
+} ATOM_MODE_TIMING;
+
+typedef struct _ATOM_DTD_FORMAT {
+ USHORT usPixClk;
+ USHORT usHActive;
+ USHORT usHBlanking_Time;
+ USHORT usVActive;
+ USHORT usVBlanking_Time;
+ USHORT usHSyncOffset;
+ USHORT usHSyncWidth;
+ USHORT usVSyncOffset;
+ USHORT usVSyncWidth;
+ USHORT usImageHSize;
+ USHORT usImageVSize;
+ UCHAR ucHBorder;
+ UCHAR ucVBorder;
+ ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+ UCHAR ucInternalModeNumber;
+ UCHAR ucRefreshRate;
+} ATOM_DTD_FORMAT;
+
+/****************************************************************************/
+/* Structure used in LVDS_InfoTable */
+/* * Need a document to describe this table */
+/****************************************************************************/
+#define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+#define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+#define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+#define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+
+/* Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. */
+/* Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL */
+#define LCDPANEL_CAP_READ_EDID 0x1
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_LVDS_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usModePatchTableOffset;
+ USHORT usSupportedRefreshRate; /* Refer to panel info table in ATOMBIOS extension Spec. */
+ USHORT usOffDelayInMs;
+ UCHAR ucPowerSequenceDigOntoDEin10Ms;
+ UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+ UCHAR ucLVDS_Misc; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
+ /* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
+ /* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
+ /* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+} ATOM_LVDS_INFO;
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_LVDS_INFO_V12 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usExtInfoTableOffset;
+ USHORT usSupportedRefreshRate; /* Refer to panel info table in ATOMBIOS extension Spec. */
+ USHORT usOffDelayInMs;
+ UCHAR ucPowerSequenceDigOntoDEin10Ms;
+ UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+ UCHAR ucLVDS_Misc; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
+ /* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
+ /* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
+ /* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+ USHORT usLCDVenderID;
+ USHORT usLCDProductID;
+ UCHAR ucLCDPanel_SpecialHandlingCap;
+ UCHAR ucPanelInfoSize; /* start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable */
+ UCHAR ucReserved[2];
+} ATOM_LVDS_INFO_V12;
+
+#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12
+
+typedef struct _ATOM_PATCH_RECORD_MODE {
+ UCHAR ucRecordType;
+ USHORT usHDisp;
+ USHORT usVDisp;
+} ATOM_PATCH_RECORD_MODE;
+
+typedef struct _ATOM_LCD_RTS_RECORD {
+ UCHAR ucRecordType;
+ UCHAR ucRTSValue;
+} ATOM_LCD_RTS_RECORD;
+
+/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */
+typedef struct _ATOM_LCD_MODE_CONTROL_CAP {
+ UCHAR ucRecordType;
+ USHORT usLCDCap;
+} ATOM_LCD_MODE_CONTROL_CAP;
+
+#define LCD_MODE_CAP_BL_OFF 1
+#define LCD_MODE_CAP_CRTC_OFF 2
+#define LCD_MODE_CAP_PANEL_OFF 4
+
+typedef struct _ATOM_FAKE_EDID_PATCH_RECORD {
+ UCHAR ucRecordType;
+ UCHAR ucFakeEDIDLength;
+ UCHAR ucFakeEDIDString[1]; /* This actually has ucFakeEdidLength elements. */
+} ATOM_FAKE_EDID_PATCH_RECORD;
+
+typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD {
+ UCHAR ucRecordType;
+ USHORT usHSize;
+ USHORT usVSize;
+} ATOM_PANEL_RESOLUTION_PATCH_RECORD;
+
+#define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
+#define LCD_RTS_RECORD_TYPE 2
+#define LCD_CAP_RECORD_TYPE 3
+#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
+#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
+#define ATOM_RECORD_END_TYPE 0xFF
+
+/****************************Spread Spectrum Info Table Definitions **********************/
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT {
+ USHORT usSpreadSpectrumPercentage;
+ UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+ UCHAR ucSS_Step;
+ UCHAR ucSS_Delay;
+ UCHAR ucSS_Id;
+ UCHAR ucRecommandedRef_Div;
+ UCHAR ucSS_Range; /* it was reserved for V11 */
+} ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
+
+#define ATOM_MAX_SS_ENTRY 16
+#define ATOM_DP_SS_ID1 0x0f1 /* SS modulation freq=30k */
+#define ATOM_DP_SS_ID2 0x0f2 /* SS modulation freq=33k */
+
+#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
+#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
+#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
+#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
+#define ATOM_INTERNAL_SS_MASK 0x00000000
+#define ATOM_EXTERNAL_SS_MASK 0x00000002
+#define EXEC_SS_STEP_SIZE_SHIFT 2
+#define EXEC_SS_DELAY_SHIFT 4
+#define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
+
+typedef struct _ATOM_SPREAD_SPECTRUM_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
+} ATOM_SPREAD_SPECTRUM_INFO;
+
+/****************************************************************************/
+/* Structure used in AnalogTV_InfoTable (Top level) */
+/****************************************************************************/
+/* ucTVBootUpDefaultStd definiton: */
+
+/* ATOM_TV_NTSC 1 */
+/* ATOM_TV_NTSCJ 2 */
+/* ATOM_TV_PAL 3 */
+/* ATOM_TV_PALM 4 */
+/* ATOM_TV_PALCN 5 */
+/* ATOM_TV_PALN 6 */
+/* ATOM_TV_PAL60 7 */
+/* ATOM_TV_SECAM 8 */
+
+/* ucTVSuppportedStd definition: */
+#define NTSC_SUPPORT 0x1
+#define NTSCJ_SUPPORT 0x2
+
+#define PAL_SUPPORT 0x4
+#define PALM_SUPPORT 0x8
+#define PALCN_SUPPORT 0x10
+#define PALN_SUPPORT 0x20
+#define PAL60_SUPPORT 0x40
+#define SECAM_SUPPORT 0x80
+
+#define MAX_SUPPORTED_TV_TIMING 2
+
+typedef struct _ATOM_ANALOG_TV_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucTV_SupportedStandard;
+ UCHAR ucTV_BootUpDefaultStandard;
+ UCHAR ucExt_TV_ASIC_ID;
+ UCHAR ucExt_TV_ASIC_SlaveAddr;
+ /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING]; */
+ ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING];
+} ATOM_ANALOG_TV_INFO;
+
+/**************************************************************************/
+/* VRAM usage and their defintions */
+
+/* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
+/* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
+/* All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! */
+/* To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR */
+/* To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX */
+
+#ifndef VESA_MEMORY_IN_64K_BLOCK
+#define VESA_MEMORY_IN_64K_BLOCK 0x100 /* 256*64K=16Mb (Max. VESA memory is 16Mb!) */
+#endif
+
+#define ATOM_EDID_RAW_DATASIZE 256 /* In Bytes */
+#define ATOM_HWICON_SURFACE_SIZE 4096 /* In Bytes */
+#define ATOM_HWICON_INFOTABLE_SIZE 32
+#define MAX_DTD_MODE_IN_VRAM 6
+#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) /* 28= (SIZEOF ATOM_DTD_FORMAT) */
+#define ATOM_STD_MODE_SUPPORT_TBL_SIZE (32*8) /* 32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) */
+#define DFP_ENCODER_TYPE_OFFSET 0x80
+#define DP_ENCODER_LANE_NUM_OFFSET 0x84
+#define DP_ENCODER_LINK_RATE_OFFSET 0x88
+
+#define ATOM_HWICON1_SURFACE_ADDR 0
+#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
+#define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_TV2_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_TV2_DTD_MODE_TBL_ADDR (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_TV2_STD_MODE_TBL_ADDR (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP2_EDID_ADDR (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 256)
+#define ATOM_STACK_STORAGE_END (ATOM_STACK_STORAGE_START + 512)
+
+/* The size below is in Kb! */
+#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
+
+#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
+#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
+#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
+#define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
+
+/***********************************************************************************/
+/* Structure used in VRAM_UsageByFirmwareTable */
+/* Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm */
+/* at running time. */
+/* note2: From RV770, the memory is more than 32bit addressable, so we will change */
+/* ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains */
+/* exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware */
+/* (in offset to start of memory address) is KB aligned instead of byte aligend. */
+/***********************************************************************************/
+#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
+
+typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO {
+ ULONG ulStartAddrUsedByFirmware;
+ USHORT usFirmwareUseInKb;
+ USHORT usReserved;
+} ATOM_FIRMWARE_VRAM_RESERVE_INFO;
+
+typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_FIRMWARE_VRAM_RESERVE_INFO
+ asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
+} ATOM_VRAM_USAGE_BY_FIRMWARE;
+
+/****************************************************************************/
+/* Structure used in GPIO_Pin_LUTTable */
+/****************************************************************************/
+typedef struct _ATOM_GPIO_PIN_ASSIGNMENT {
+ USHORT usGpioPin_AIndex;
+ UCHAR ucGpioPinBitShift;
+ UCHAR ucGPIO_ID;
+} ATOM_GPIO_PIN_ASSIGNMENT;
+
+typedef struct _ATOM_GPIO_PIN_LUT {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
+} ATOM_GPIO_PIN_LUT;
+
+/****************************************************************************/
+/* Structure used in ComponentVideoInfoTable */
+/****************************************************************************/
+#define GPIO_PIN_ACTIVE_HIGH 0x1
+
+#define MAX_SUPPORTED_CV_STANDARDS 5
+
+/* definitions for ATOM_D_INFO.ucSettings */
+#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F /* [4:0] */
+#define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 /* [6:5] = must be zeroed out */
+#define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 /* [7] */
+
+typedef struct _ATOM_GPIO_INFO {
+ USHORT usAOffset;
+ UCHAR ucSettings;
+ UCHAR ucReserved;
+} ATOM_GPIO_INFO;
+
+/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) */
+#define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
+
+/* definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i */
+#define ATOM_GPIO_DEFAULT_MODE_EN 0x80 /* [7]; */
+#define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F /* [6:0] */
+
+/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode */
+/* Line 3 out put 5V. */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 /* represent gpio 3 state for 16:9 */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 /* represent gpio 4 state for 16:9 */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
+
+/* Line 3 out put 2.2V */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 /* represent gpio 3 state for 4:3 Letter box */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 /* represent gpio 4 state for 4:3 Letter box */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
+
+/* Line 3 out put 0V */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 /* represent gpio 3 state for 4:3 */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 /* represent gpio 4 state for 4:3 */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
+
+#define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F /* bit [5:0] */
+
+#define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 /* bit 7 */
+
+/* GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. */
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 /* bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 /* bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
+
+typedef struct _ATOM_COMPONENT_VIDEO_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMask_PinRegisterIndex;
+ USHORT usEN_PinRegisterIndex;
+ USHORT usY_PinRegisterIndex;
+ USHORT usA_PinRegisterIndex;
+ UCHAR ucBitShift;
+ UCHAR ucPinActiveState; /* ucPinActiveState: Bit0=1 active high, =0 active low */
+ ATOM_DTD_FORMAT sReserved; /* must be zeroed out */
+ UCHAR ucMiscInfo;
+ UCHAR uc480i;
+ UCHAR uc480p;
+ UCHAR uc720p;
+ UCHAR uc1080i;
+ UCHAR ucLetterBoxMode;
+ UCHAR ucReserved[3];
+ UCHAR ucNumOfWbGpioBlocks; /* For Component video D-Connector support. If zere, NTSC type connector */
+ ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+} ATOM_COMPONENT_VIDEO_INFO;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucMiscInfo;
+ UCHAR uc480i;
+ UCHAR uc480p;
+ UCHAR uc720p;
+ UCHAR uc1080i;
+ UCHAR ucReserved;
+ UCHAR ucLetterBoxMode;
+ UCHAR ucNumOfWbGpioBlocks; /* For Component video D-Connector support. If zere, NTSC type connector */
+ ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+} ATOM_COMPONENT_VIDEO_INFO_V21;
+
+#define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
+
+/****************************************************************************/
+/* Structure used in object_InfoTable */
+/****************************************************************************/
+typedef struct _ATOM_OBJECT_HEADER {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ USHORT usConnectorObjectTableOffset;
+ USHORT usRouterObjectTableOffset;
+ USHORT usEncoderObjectTableOffset;
+ USHORT usProtectionObjectTableOffset; /* only available when Protection block is independent. */
+ USHORT usDisplayPathTableOffset;
+} ATOM_OBJECT_HEADER;
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH {
+ USHORT usDeviceTag; /* supported device */
+ USHORT usSize; /* the size of ATOM_DISPLAY_OBJECT_PATH */
+ USHORT usConnObjectId; /* Connector Object ID */
+ USHORT usGPUObjectId; /* GPU ID */
+ USHORT usGraphicObjIds[1]; /* 1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. */
+} ATOM_DISPLAY_OBJECT_PATH;
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE {
+ UCHAR ucNumOfDispPath;
+ UCHAR ucVersion;
+ UCHAR ucPadding[2];
+ ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
+} ATOM_DISPLAY_OBJECT_PATH_TABLE;
+
+typedef struct _ATOM_OBJECT /* each object has this structure */
+{
+ USHORT usObjectID;
+ USHORT usSrcDstTableOffset;
+ USHORT usRecordOffset; /* this pointing to a bunch of records defined below */
+ USHORT usReserved;
+} ATOM_OBJECT;
+
+typedef struct _ATOM_OBJECT_TABLE /* Above 4 object table offset pointing to a bunch of objects all have this structure */
+{
+ UCHAR ucNumberOfObjects;
+ UCHAR ucPadding[3];
+ ATOM_OBJECT asObjects[1];
+} ATOM_OBJECT_TABLE;
+
+typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT /* usSrcDstTableOffset pointing to this structure */
+{
+ UCHAR ucNumberOfSrc;
+ USHORT usSrcObjectID[1];
+ UCHAR ucNumberOfDst;
+ USHORT usDstObjectID[1];
+} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
+
+/* Related definitions, all records are differnt but they have a commond header */
+typedef struct _ATOM_COMMON_RECORD_HEADER {
+ UCHAR ucRecordType; /* An emun to indicate the record type */
+ UCHAR ucRecordSize; /* The size of the whole record in byte */
+} ATOM_COMMON_RECORD_HEADER;
+
+#define ATOM_I2C_RECORD_TYPE 1
+#define ATOM_HPD_INT_RECORD_TYPE 2
+#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
+#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
+#define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
+#define ATOM_JTAG_RECORD_TYPE 8 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
+#define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
+#define ATOM_CONNECTOR_CF_RECORD_TYPE 11
+#define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
+#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
+#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
+#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
+
+/* Must be updated when new record type is added,equal to that record definition! */
+#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_CF_RECORD_TYPE
+
+typedef struct _ATOM_I2C_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ATOM_I2C_ID_CONFIG sucI2cId;
+ UCHAR ucI2CAddr; /* The slave address, it's 0 when the record is attached to connector for DDC */
+} ATOM_I2C_RECORD;
+
+typedef struct _ATOM_HPD_INT_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucHPDIntGPIOID; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */
+ UCHAR ucPluggged_PinState;
+} ATOM_HPD_INT_RECORD;
+
+typedef struct _ATOM_OUTPUT_PROTECTION_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucProtectionFlag;
+ UCHAR ucReserved;
+} ATOM_OUTPUT_PROTECTION_RECORD;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG {
+ ULONG ulACPIDeviceEnum; /* Reserved for now */
+ USHORT usDeviceID; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT" */
+ USHORT usPadding;
+} ATOM_CONNECTOR_DEVICE_TAG;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucNumberOfDevice;
+ UCHAR ucReserved;
+ ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation */
+} ATOM_CONNECTOR_DEVICE_TAG_RECORD;
+
+typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucConfigGPIOID;
+ UCHAR ucConfigGPIOState; /* Set to 1 when it's active high to enable external flow in */
+ UCHAR ucFlowinGPIPID;
+ UCHAR ucExtInGPIPID;
+} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
+
+typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucCTL1GPIO_ID;
+ UCHAR ucCTL1GPIOState; /* Set to 1 when it's active high */
+ UCHAR ucCTL2GPIO_ID;
+ UCHAR ucCTL2GPIOState; /* Set to 1 when it's active high */
+ UCHAR ucCTL3GPIO_ID;
+ UCHAR ucCTL3GPIOState; /* Set to 1 when it's active high */
+ UCHAR ucCTLFPGA_IN_ID;
+ UCHAR ucPadding[3];
+} ATOM_ENCODER_FPGA_CONTROL_RECORD;
+
+typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucGPIOID; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */
+ UCHAR ucTVActiveState; /* Indicating when the pin==0 or 1 when TV is connected */
+} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
+
+typedef struct _ATOM_JTAG_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucTMSGPIO_ID;
+ UCHAR ucTMSGPIOState; /* Set to 1 when it's active high */
+ UCHAR ucTCKGPIO_ID;
+ UCHAR ucTCKGPIOState; /* Set to 1 when it's active high */
+ UCHAR ucTDOGPIO_ID;
+ UCHAR ucTDOGPIOState; /* Set to 1 when it's active high */
+ UCHAR ucTDIGPIO_ID;
+ UCHAR ucTDIGPIOState; /* Set to 1 when it's active high */
+ UCHAR ucPadding[2];
+} ATOM_JTAG_RECORD;
+
+/* The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually */
+typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR {
+ UCHAR ucGPIOID; /* GPIO_ID, find the corresponding ID in GPIO_LUT table */
+ UCHAR ucGPIO_PinState; /* Pin state showing how to set-up the pin */
+} ATOM_GPIO_PIN_CONTROL_PAIR;
+
+typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucFlags; /* Future expnadibility */
+ UCHAR ucNumberOfPins; /* Number of GPIO pins used to control the object */
+ ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; /* the real gpio pin pair determined by number of pins ucNumberOfPins */
+} ATOM_OBJECT_GPIO_CNTL_RECORD;
+
+/* Definitions for GPIO pin state */
+#define GPIO_PIN_TYPE_INPUT 0x00
+#define GPIO_PIN_TYPE_OUTPUT 0x10
+#define GPIO_PIN_TYPE_HW_CONTROL 0x20
+
+/* For GPIO_PIN_TYPE_OUTPUT the following is defined */
+#define GPIO_PIN_OUTPUT_STATE_MASK 0x01
+#define GPIO_PIN_OUTPUT_STATE_SHIFT 0
+#define GPIO_PIN_STATE_ACTIVE_LOW 0x0
+#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
+
+typedef struct _ATOM_ENCODER_DVO_CF_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ULONG ulStrengthControl; /* DVOA strength control for CF */
+ UCHAR ucPadding[2];
+} ATOM_ENCODER_DVO_CF_RECORD;
+
+/* value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle */
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
+
+typedef struct _ATOM_CONNECTOR_CF_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ USHORT usMaxPixClk;
+ UCHAR ucFlowCntlGpioId;
+ UCHAR ucSwapCntlGpioId;
+ UCHAR ucConnectedDvoBundle;
+ UCHAR ucPadding;
+} ATOM_CONNECTOR_CF_RECORD;
+
+typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ ATOM_DTD_FORMAT asTiming;
+} ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
+
+typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader; /* ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE */
+ UCHAR ucSubConnectorType; /* CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A */
+ UCHAR ucReserved;
+} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
+
+typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucMuxType; /* decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state */
+ UCHAR ucMuxControlPin;
+ UCHAR ucMuxState[2]; /* for alligment purpose */
+} ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
+
+typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD {
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucMuxType;
+ UCHAR ucMuxControlPin;
+ UCHAR ucMuxState[2]; /* for alligment purpose */
+} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
+
+/* define ucMuxType */
+#define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
+#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
+
+/****************************************************************************/
+/* ASIC voltage data table */
+/****************************************************************************/
+typedef struct _ATOM_VOLTAGE_INFO_HEADER {
+ USHORT usVDDCBaseLevel; /* In number of 50mv unit */
+ USHORT usReserved; /* For possible extension table offset */
+ UCHAR ucNumOfVoltageEntries;
+ UCHAR ucBytesPerVoltageEntry;
+ UCHAR ucVoltageStep; /* Indicating in how many mv increament is one step, 0.5mv unit */
+ UCHAR ucDefaultVoltageEntry;
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+} ATOM_VOLTAGE_INFO_HEADER;
+
+typedef struct _ATOM_VOLTAGE_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_INFO_HEADER viHeader;
+ UCHAR ucVoltageEntries[64]; /* 64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry */
+} ATOM_VOLTAGE_INFO;
+
+typedef struct _ATOM_VOLTAGE_FORMULA {
+ USHORT usVoltageBaseLevel; /* In number of 1mv unit */
+ USHORT usVoltageStep; /* Indicating in how many mv increament is one step, 1mv unit */
+ UCHAR ucNumOfVoltageEntries; /* Number of Voltage Entry, which indicate max Voltage */
+ UCHAR ucFlag; /* bit0=0 :step is 1mv =1 0.5mv */
+ UCHAR ucBaseVID; /* if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep */
+ UCHAR ucReserved;
+ UCHAR ucVIDAdjustEntries[32]; /* 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries */
+} ATOM_VOLTAGE_FORMULA;
+
+typedef struct _ATOM_VOLTAGE_CONTROL {
+ UCHAR ucVoltageControlId; /* Indicate it is controlled by I2C or GPIO or HW state machine */
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+ USHORT usGpioPin_AIndex; /* GPIO_PAD register index */
+ UCHAR ucGpioPinBitShift[9]; /* at most 8 pin support 255 VIDs, termintate with 0xff */
+ UCHAR ucReserved;
+} ATOM_VOLTAGE_CONTROL;
+
+/* Define ucVoltageControlId */
+#define VOLTAGE_CONTROLLED_BY_HW 0x00
+#define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
+#define VOLTAGE_CONTROLLED_BY_GPIO 0x80
+#define VOLTAGE_CONTROL_ID_LM64 0x01 /* I2C control, used for R5xx Core Voltage */
+#define VOLTAGE_CONTROL_ID_DAC 0x02 /* I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI */
+#define VOLTAGE_CONTROL_ID_VT116xM 0x03 /* I2C control, used for R6xx Core Voltage */
+#define VOLTAGE_CONTROL_ID_DS4402 0x04
+
+typedef struct _ATOM_VOLTAGE_OBJECT {
+ UCHAR ucVoltageType; /* Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI */
+ UCHAR ucSize; /* Size of Object */
+ ATOM_VOLTAGE_CONTROL asControl; /* describ how to control */
+ ATOM_VOLTAGE_FORMULA asFormula; /* Indicate How to convert real Voltage to VID */
+} ATOM_VOLTAGE_OBJECT;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_OBJECT asVoltageObj[3]; /* Info for Voltage control */
+} ATOM_VOLTAGE_OBJECT_INFO;
+
+typedef struct _ATOM_LEAKID_VOLTAGE {
+ UCHAR ucLeakageId;
+ UCHAR ucReserved;
+ USHORT usVoltage;
+} ATOM_LEAKID_VOLTAGE;
+
+typedef struct _ATOM_ASIC_PROFILE_VOLTAGE {
+ UCHAR ucProfileId;
+ UCHAR ucReserved;
+ USHORT usSize;
+ USHORT usEfuseSpareStartAddr;
+ USHORT usFuseIndex[8]; /* from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, */
+ ATOM_LEAKID_VOLTAGE asLeakVol[2]; /* Leakid and relatd voltage */
+} ATOM_ASIC_PROFILE_VOLTAGE;
+
+/* ucProfileId */
+#define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
+#define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
+#define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
+
+typedef struct _ATOM_ASIC_PROFILING_INFO {
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
+} ATOM_ASIC_PROFILING_INFO;
+
+typedef struct _ATOM_POWER_SOURCE_OBJECT {
+ UCHAR ucPwrSrcId; /* Power source */
+ UCHAR ucPwrSensorType; /* GPIO, I2C or none */
+ UCHAR ucPwrSensId; /* if GPIO detect, it is GPIO id, if I2C detect, it is I2C id */
+ UCHAR ucPwrSensSlaveAddr; /* Slave address if I2C detect */
+ UCHAR ucPwrSensRegIndex; /* I2C register Index if I2C detect */
+ UCHAR ucPwrSensRegBitMask; /* detect which bit is used if I2C detect */
+ UCHAR ucPwrSensActiveState; /* high active or low active */
+ UCHAR ucReserve[3]; /* reserve */
+ USHORT usSensPwr; /* in unit of watt */
+} ATOM_POWER_SOURCE_OBJECT;
+
+typedef struct _ATOM_POWER_SOURCE_INFO {
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ UCHAR asPwrbehave[16];
+ ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
+} ATOM_POWER_SOURCE_INFO;
+
+/* Define ucPwrSrcId */
+#define POWERSOURCE_PCIE_ID1 0x00
+#define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
+#define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
+#define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
+#define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
+
+/* define ucPwrSensorId */
+#define POWER_SENSOR_ALWAYS 0x00
+#define POWER_SENSOR_GPIO 0x01
+#define POWER_SENSOR_I2C 0x02
+
+/**************************************************************************/
+/* This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design */
+/* Memory SS Info Table */
+/* Define Memory Clock SS chip ID */
+#define ICS91719 1
+#define ICS91720 2
+
+/* Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol */
+typedef struct _ATOM_I2C_DATA_RECORD {
+ UCHAR ucNunberOfBytes; /* Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" */
+ UCHAR ucI2CData[1]; /* I2C data in bytes, should be less than 16 bytes usually */
+} ATOM_I2C_DATA_RECORD;
+
+/* Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information */
+typedef struct _ATOM_I2C_DEVICE_SETUP_INFO {
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; /* I2C line and HW/SW assisted cap. */
+ UCHAR ucSSChipID; /* SS chip being used */
+ UCHAR ucSSChipSlaveAddr; /* Slave Address to set up this SS chip */
+ UCHAR ucNumOfI2CDataRecords; /* number of data block */
+ ATOM_I2C_DATA_RECORD asI2CData[1];
+} ATOM_I2C_DEVICE_SETUP_INFO;
+
+/* ========================================================================================== */
+typedef struct _ATOM_ASIC_MVDD_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
+} ATOM_ASIC_MVDD_INFO;
+
+/* ========================================================================================== */
+#define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
+
+/* ========================================================================================== */
+/**************************************************************************/
+
+typedef struct _ATOM_ASIC_SS_ASSIGNMENT {
+ ULONG ulTargetClockRange; /* Clock Out frequence (VCO ), in unit of 10Khz */
+ USHORT usSpreadSpectrumPercentage; /* in unit of 0.01% */
+ USHORT usSpreadRateInKhz; /* in unit of kHz, modulation freq */
+ UCHAR ucClockIndication; /* Indicate which clock source needs SS */
+ UCHAR ucSpreadSpectrumMode; /* Bit1=0 Down Spread,=1 Center Spread. */
+ UCHAR ucReserved[2];
+} ATOM_ASIC_SS_ASSIGNMENT;
+
+/* Define ucSpreadSpectrumType */
+#define ASIC_INTERNAL_MEMORY_SS 1
+#define ASIC_INTERNAL_ENGINE_SS 2
+#define ASIC_INTERNAL_UVD_SS 3
+
+typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
+} ATOM_ASIC_INTERNAL_SS_INFO;
+
+/* ==============================Scratch Pad Definition Portion=============================== */
+#define ATOM_DEVICE_CONNECT_INFO_DEF 0
+#define ATOM_ROM_LOCATION_DEF 1
+#define ATOM_TV_STANDARD_DEF 2
+#define ATOM_ACTIVE_INFO_DEF 3
+#define ATOM_LCD_INFO_DEF 4
+#define ATOM_DOS_REQ_INFO_DEF 5
+#define ATOM_ACC_CHANGE_INFO_DEF 6
+#define ATOM_DOS_MODE_INFO_DEF 7
+#define ATOM_I2C_CHANNEL_STATUS_DEF 8
+#define ATOM_I2C_CHANNEL_STATUS1_DEF 9
+
+/* BIOS_0_SCRATCH Definition */
+#define ATOM_S0_CRT1_MONO 0x00000001L
+#define ATOM_S0_CRT1_COLOR 0x00000002L
+#define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
+#define ATOM_S0_TV1_SVIDEO_A 0x00000008L
+#define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
+
+#define ATOM_S0_CV_A 0x00000010L
+#define ATOM_S0_CV_DIN_A 0x00000020L
+#define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
+
+#define ATOM_S0_CRT2_MONO 0x00000100L
+#define ATOM_S0_CRT2_COLOR 0x00000200L
+#define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE 0x00000400L
+#define ATOM_S0_TV1_SVIDEO 0x00000800L
+#define ATOM_S0_TV1_SCART 0x00004000L
+#define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
+
+#define ATOM_S0_CV 0x00001000L
+#define ATOM_S0_CV_DIN 0x00002000L
+#define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
+
+#define ATOM_S0_DFP1 0x00010000L
+#define ATOM_S0_DFP2 0x00020000L
+#define ATOM_S0_LCD1 0x00040000L
+#define ATOM_S0_LCD2 0x00080000L
+#define ATOM_S0_TV2 0x00100000L
+#define ATOM_S0_DFP3 0x00200000L
+#define ATOM_S0_DFP4 0x00400000L
+#define ATOM_S0_DFP5 0x00800000L
+
+#define ATOM_S0_DFP_MASK \
+ (ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5)
+
+#define ATOM_S0_FAD_REGISTER_BUG 0x02000000L /* If set, indicates we are running a PCIE asic with */
+ /* the FAD/HDP reg access bug. Bit is read by DAL */
+
+#define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
+#define ATOM_S0_THERMAL_STATE_SHIFT 26
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
+#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
+
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S0_CRT1_MONOb0 0x01
+#define ATOM_S0_CRT1_COLORb0 0x02
+#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
+
+#define ATOM_S0_TV1_COMPOSITEb0 0x04
+#define ATOM_S0_TV1_SVIDEOb0 0x08
+#define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
+
+#define ATOM_S0_CVb0 0x10
+#define ATOM_S0_CV_DINb0 0x20
+#define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
+
+#define ATOM_S0_CRT2_MONOb1 0x01
+#define ATOM_S0_CRT2_COLORb1 0x02
+#define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
+
+#define ATOM_S0_TV1_COMPOSITEb1 0x04
+#define ATOM_S0_TV1_SVIDEOb1 0x08
+#define ATOM_S0_TV1_SCARTb1 0x40
+#define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
+
+#define ATOM_S0_CVb1 0x10
+#define ATOM_S0_CV_DINb1 0x20
+#define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
+
+#define ATOM_S0_DFP1b2 0x01
+#define ATOM_S0_DFP2b2 0x02
+#define ATOM_S0_LCD1b2 0x04
+#define ATOM_S0_LCD2b2 0x08
+#define ATOM_S0_TV2b2 0x10
+#define ATOM_S0_DFP3b2 0x20
+
+#define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
+#define ATOM_S0_THERMAL_STATE_SHIFTb3 2
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
+#define ATOM_S0_LCD1_SHIFT 18
+
+/* BIOS_1_SCRATCH Definition */
+#define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
+#define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
+
+/* BIOS_2_SCRATCH Definition */
+#define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
+#define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
+#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
+
+#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
+#define ATOM_S2_LCD1_DPMS_STATE 0x00020000L
+#define ATOM_S2_TV1_DPMS_STATE 0x00040000L
+#define ATOM_S2_DFP1_DPMS_STATE 0x00080000L
+#define ATOM_S2_CRT2_DPMS_STATE 0x00100000L
+#define ATOM_S2_LCD2_DPMS_STATE 0x00200000L
+#define ATOM_S2_TV2_DPMS_STATE 0x00400000L
+#define ATOM_S2_DFP2_DPMS_STATE 0x00800000L
+#define ATOM_S2_CV_DPMS_STATE 0x01000000L
+#define ATOM_S2_DFP3_DPMS_STATE 0x02000000L
+#define ATOM_S2_DFP4_DPMS_STATE 0x04000000L
+#define ATOM_S2_DFP5_DPMS_STATE 0x08000000L
+
+#define ATOM_S2_DFP_DPM_STATE \
+ (ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | \
+ ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | \
+ ATOM_S2_DFP5_DPMS_STATE)
+
+#define ATOM_S2_DEVICE_DPMS_STATE \
+ (ATOM_S2_CRT1_DPMS_STATE + ATOM_S2_LCD1_DPMS_STATE + \
+ ATOM_S2_TV1_DPMS_STATE + ATOM_S2_DFP_DPMS_STATE + \
+ ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \
+ ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE)
+
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
+
+#define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
+
+#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
+#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
+#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
+#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
+#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
+#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
+#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
+#define ATOM_S2_CRT1_DPMS_STATEb2 0x01
+#define ATOM_S2_LCD1_DPMS_STATEb2 0x02
+#define ATOM_S2_TV1_DPMS_STATEb2 0x04
+#define ATOM_S2_DFP1_DPMS_STATEb2 0x08
+#define ATOM_S2_CRT2_DPMS_STATEb2 0x10
+#define ATOM_S2_LCD2_DPMS_STATEb2 0x20
+#define ATOM_S2_TV2_DPMS_STATEb2 0x40
+#define ATOM_S2_DFP2_DPMS_STATEb2 0x80
+#define ATOM_S2_CV_DPMS_STATEb3 0x01
+#define ATOM_S2_DFP3_DPMS_STATEb3 0x02
+#define ATOM_S2_DFP4_DPMS_STATEb3 0x04
+#define ATOM_S2_DFP5_DPMS_STATEb3 0x08
+
+#define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
+#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
+#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
+
+/* BIOS_3_SCRATCH Definition */
+#define ATOM_S3_CRT1_ACTIVE 0x00000001L
+#define ATOM_S3_LCD1_ACTIVE 0x00000002L
+#define ATOM_S3_TV1_ACTIVE 0x00000004L
+#define ATOM_S3_DFP1_ACTIVE 0x00000008L
+#define ATOM_S3_CRT2_ACTIVE 0x00000010L
+#define ATOM_S3_LCD2_ACTIVE 0x00000020L
+#define ATOM_S3_TV2_ACTIVE 0x00000040L
+#define ATOM_S3_DFP2_ACTIVE 0x00000080L
+#define ATOM_S3_CV_ACTIVE 0x00000100L
+#define ATOM_S3_DFP3_ACTIVE 0x00000200L
+#define ATOM_S3_DFP4_ACTIVE 0x00000400L
+#define ATOM_S3_DFP5_ACTIVE 0x00000800L
+
+#define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL
+
+#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
+#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
+
+#define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
+#define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
+#define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
+#define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
+#define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
+#define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
+#define ATOM_S3_TV2_CRTC_ACTIVE 0x00400000L
+#define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
+#define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
+#define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
+#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
+#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
+
+#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
+#define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
+#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
+#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S3_CRT1_ACTIVEb0 0x01
+#define ATOM_S3_LCD1_ACTIVEb0 0x02
+#define ATOM_S3_TV1_ACTIVEb0 0x04
+#define ATOM_S3_DFP1_ACTIVEb0 0x08
+#define ATOM_S3_CRT2_ACTIVEb0 0x10
+#define ATOM_S3_LCD2_ACTIVEb0 0x20
+#define ATOM_S3_TV2_ACTIVEb0 0x40
+#define ATOM_S3_DFP2_ACTIVEb0 0x80
+#define ATOM_S3_CV_ACTIVEb1 0x01
+#define ATOM_S3_DFP3_ACTIVEb1 0x02
+#define ATOM_S3_DFP4_ACTIVEb1 0x04
+#define ATOM_S3_DFP5_ACTIVEb1 0x08
+
+#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
+
+#define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
+#define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
+#define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
+#define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
+#define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
+#define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
+#define ATOM_S3_TV2_CRTC_ACTIVEb2 0x40
+#define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
+#define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
+#define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
+#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
+#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
+
+#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
+
+#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20
+#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
+#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80
+
+/* BIOS_4_SCRATCH Definition */
+#define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
+#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
+#define ATOM_S4_LCD1_REFRESH_SHIFT 8
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
+#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
+#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
+
+/* BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! */
+#define ATOM_S5_DOS_REQ_CRT1b0 0x01
+#define ATOM_S5_DOS_REQ_LCD1b0 0x02
+#define ATOM_S5_DOS_REQ_TV1b0 0x04
+#define ATOM_S5_DOS_REQ_DFP1b0 0x08
+#define ATOM_S5_DOS_REQ_CRT2b0 0x10
+#define ATOM_S5_DOS_REQ_LCD2b0 0x20
+#define ATOM_S5_DOS_REQ_TV2b0 0x40
+#define ATOM_S5_DOS_REQ_DFP2b0 0x80
+#define ATOM_S5_DOS_REQ_CVb1 0x01
+#define ATOM_S5_DOS_REQ_DFP3b1 0x02
+#define ATOM_S5_DOS_REQ_DFP4b1 0x04
+#define ATOM_S5_DOS_REQ_DFP5b1 0x08
+
+#define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF
+
+#define ATOM_S5_DOS_REQ_CRT1 0x0001
+#define ATOM_S5_DOS_REQ_LCD1 0x0002
+#define ATOM_S5_DOS_REQ_TV1 0x0004
+#define ATOM_S5_DOS_REQ_DFP1 0x0008
+#define ATOM_S5_DOS_REQ_CRT2 0x0010
+#define ATOM_S5_DOS_REQ_LCD2 0x0020
+#define ATOM_S5_DOS_REQ_TV2 0x0040
+#define ATOM_S5_DOS_REQ_DFP2 0x0080
+#define ATOM_S5_DOS_REQ_CV 0x0100
+#define ATOM_S5_DOS_REQ_DFP3 0x0200
+#define ATOM_S5_DOS_REQ_DFP4 0x0400
+#define ATOM_S5_DOS_REQ_DFP5 0x0800
+
+#define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
+#define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
+#define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
+#define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
+#define ATOM_S5_DOS_FORCE_DEVICEw1 \
+ (ATOM_S5_DOS_FORCE_CRT1b2 + ATOM_S5_DOS_FORCE_TV1b2 + \
+ ATOM_S5_DOS_FORCE_CRT2b2 + (ATOM_S5_DOS_FORCE_CVb3 << 8))
+
+/* BIOS_6_SCRATCH Definition */
+#define ATOM_S6_DEVICE_CHANGE 0x00000001L
+#define ATOM_S6_SCALER_CHANGE 0x00000002L
+#define ATOM_S6_LID_CHANGE 0x00000004L
+#define ATOM_S6_DOCKING_CHANGE 0x00000008L
+#define ATOM_S6_ACC_MODE 0x00000010L
+#define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
+#define ATOM_S6_LID_STATE 0x00000040L
+#define ATOM_S6_DOCK_STATE 0x00000080L
+#define ATOM_S6_CRITICAL_STATE 0x00000100L
+#define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
+#define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
+#define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L /* Normal expansion Request bit for LCD */
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L /* Aspect ratio expansion Request bit for LCD */
+
+#define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L /* This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion */
+#define ATOM_S6_I2C_STATE_CHANGE 0x00008000L /* This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion */
+
+#define ATOM_S6_ACC_REQ_CRT1 0x00010000L
+#define ATOM_S6_ACC_REQ_LCD1 0x00020000L
+#define ATOM_S6_ACC_REQ_TV1 0x00040000L
+#define ATOM_S6_ACC_REQ_DFP1 0x00080000L
+#define ATOM_S6_ACC_REQ_CRT2 0x00100000L
+#define ATOM_S6_ACC_REQ_LCD2 0x00200000L
+#define ATOM_S6_ACC_REQ_TV2 0x00400000L
+#define ATOM_S6_ACC_REQ_DFP2 0x00800000L
+#define ATOM_S6_ACC_REQ_CV 0x01000000L
+#define ATOM_S6_ACC_REQ_DFP3 0x02000000L
+#define ATOM_S6_ACC_REQ_DFP4 0x04000000L
+#define ATOM_S6_ACC_REQ_DFP5 0x08000000L
+
+#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S6_DEVICE_CHANGEb0 0x01
+#define ATOM_S6_SCALER_CHANGEb0 0x02
+#define ATOM_S6_LID_CHANGEb0 0x04
+#define ATOM_S6_DOCKING_CHANGEb0 0x08
+#define ATOM_S6_ACC_MODEb0 0x10
+#define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
+#define ATOM_S6_LID_STATEb0 0x40
+#define ATOM_S6_DOCK_STATEb0 0x80
+#define ATOM_S6_CRITICAL_STATEb1 0x01
+#define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
+#define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
+#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
+#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
+
+#define ATOM_S6_ACC_REQ_CRT1b2 0x01
+#define ATOM_S6_ACC_REQ_LCD1b2 0x02
+#define ATOM_S6_ACC_REQ_TV1b2 0x04
+#define ATOM_S6_ACC_REQ_DFP1b2 0x08
+#define ATOM_S6_ACC_REQ_CRT2b2 0x10
+#define ATOM_S6_ACC_REQ_LCD2b2 0x20
+#define ATOM_S6_ACC_REQ_TV2b2 0x40
+#define ATOM_S6_ACC_REQ_DFP2b2 0x80
+#define ATOM_S6_ACC_REQ_CVb3 0x01
+#define ATOM_S6_ACC_REQ_DFP3b3 0x02
+#define ATOM_S6_ACC_REQ_DFP4b3 0x04
+#define ATOM_S6_ACC_REQ_DFP5b3 0x08
+
+#define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
+#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
+
+#define ATOM_S6_DEVICE_CHANGE_SHIFT 0
+#define ATOM_S6_SCALER_CHANGE_SHIFT 1
+#define ATOM_S6_LID_CHANGE_SHIFT 2
+#define ATOM_S6_DOCKING_CHANGE_SHIFT 3
+#define ATOM_S6_ACC_MODE_SHIFT 4
+#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
+#define ATOM_S6_LID_STATE_SHIFT 6
+#define ATOM_S6_DOCK_STATE_SHIFT 7
+#define ATOM_S6_CRITICAL_STATE_SHIFT 8
+#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
+#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
+#define ATOM_S6_REQ_SCALER_SHIFT 12
+#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
+#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
+#define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
+
+/* BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! */
+#define ATOM_S7_DOS_MODE_TYPEb0 0x03
+#define ATOM_S7_DOS_MODE_VGAb0 0x00
+#define ATOM_S7_DOS_MODE_VESAb0 0x01
+#define ATOM_S7_DOS_MODE_EXTb0 0x02
+#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
+#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
+#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
+#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
+
+#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
+
+/* BIOS_8_SCRATCH Definition */
+#define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
+#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
+
+#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
+#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
+
+/* BIOS_9_SCRATCH Definition */
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
+#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
+#endif
+
+#define ATOM_FLAG_SET 0x20
+#define ATOM_FLAG_CLEAR 0
+#define CLEAR_ATOM_S6_ACC_MODE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
+#define SET_ATOM_S6_DEVICE_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SCALER_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_LID_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_LID_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) |\
+ ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_LID_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_DOCK_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8)| \
+ ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_DOCK_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_DOCK_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_THERMAL_STATE_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_CRITICAL_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_CRITICAL_STATE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_REQ_SCALER \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_REQ_SCALER \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_REQ_SCALER_ARATIO \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_I2C_STATE_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DISPLAY_STATE_CHANGE \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DEVICE_RECONFIG \
+ ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+ ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S0_LCD1 \
+ ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 ) | \
+ ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
+#define SET_ATOM_S7_DOS_8BIT_DAC_EN \
+ ((ATOM_DOS_MODE_INFO_DEF << 8) | \
+ ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN \
+ ((ATOM_DOS_MODE_INFO_DEF << 8) | \
+ ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
+
+/****************************************************************************/
+/* Portion II: Definitinos only used in Driver */
+/****************************************************************************/
+
+/* Macros used by driver */
+
+#define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char *)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES *)0)->FieldName)-(char *)0)/sizeof(USHORT))
+
+#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
+#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
+
+#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
+#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
+
+/****************************************************************************/
+/* Portion III: Definitinos only used in VBIOS */
+/****************************************************************************/
+#define ATOM_DAC_SRC 0x80
+#define ATOM_SRC_DAC1 0
+#define ATOM_SRC_DAC2 0x80
+
+#ifdef UEFI_BUILD
+#define USHORT UTEMP
+#endif
+
+typedef struct _MEMORY_PLLINIT_PARAMETERS {
+ ULONG ulTargetMemoryClock; /* In 10Khz unit */
+ UCHAR ucAction; /* not define yet */
+ UCHAR ucFbDiv_Hi; /* Fbdiv Hi byte */
+ UCHAR ucFbDiv; /* FB value */
+ UCHAR ucPostDiv; /* Post div */
+} MEMORY_PLLINIT_PARAMETERS;
+
+#define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
+
+#define GPIO_PIN_WRITE 0x01
+#define GPIO_PIN_READ 0x00
+
+typedef struct _GPIO_PIN_CONTROL_PARAMETERS {
+ UCHAR ucGPIO_ID; /* return value, read from GPIO pins */
+ UCHAR ucGPIOBitShift; /* define which bit in uGPIOBitVal need to be update */
+ UCHAR ucGPIOBitVal; /* Set/Reset corresponding bit defined in ucGPIOBitMask */
+ UCHAR ucAction; /* =GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write */
+} GPIO_PIN_CONTROL_PARAMETERS;
+
+typedef struct _ENABLE_SCALER_PARAMETERS {
+ UCHAR ucScaler; /* ATOM_SCALER1, ATOM_SCALER2 */
+ UCHAR ucEnable; /* ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION */
+ UCHAR ucTVStandard; /* */
+ UCHAR ucPadding[1];
+} ENABLE_SCALER_PARAMETERS;
+#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
+
+/* ucEnable: */
+#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
+#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
+#define SCALER_ENABLE_2TAP_ALPHA_MODE 2
+#define SCALER_ENABLE_MULTITAP_MODE 3
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS {
+ ULONG usHWIconHorzVertPosn; /* Hardware Icon Vertical position */
+ UCHAR ucHWIconVertOffset; /* Hardware Icon Vertical offset */
+ UCHAR ucHWIconHorzOffset; /* Hardware Icon Horizontal offset */
+ UCHAR ucSelection; /* ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION {
+ ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
+ ENABLE_CRTC_PARAMETERS sReserved;
+} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS {
+ USHORT usHight; /* Image Hight */
+ USHORT usWidth; /* Image Width */
+ UCHAR ucSurface; /* Surface 1 or 2 */
+ UCHAR ucPadding[3];
+} ENABLE_GRAPH_SURFACE_PARAMETERS;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 {
+ USHORT usHight; /* Image Hight */
+ USHORT usWidth; /* Image Width */
+ UCHAR ucSurface; /* Surface 1 or 2 */
+ UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */
+ UCHAR ucPadding[2];
+} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION {
+ ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
+ ENABLE_YUV_PS_ALLOCATION sReserved; /* Don't set this one */
+} ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
+
+typedef struct _MEMORY_CLEAN_UP_PARAMETERS {
+ USHORT usMemoryStart; /* in 8Kb boundry, offset from memory base address */
+ USHORT usMemorySize; /* 8Kb blocks aligned */
+} MEMORY_CLEAN_UP_PARAMETERS;
+#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
+
+typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS {
+ USHORT usX_Size; /* When use as input parameter, usX_Size indicates which CRTC */
+ USHORT usY_Size;
+} GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
+
+typedef struct _INDIRECT_IO_ACCESS {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR IOAccessSequence[256];
+} INDIRECT_IO_ACCESS;
+
+#define INDIRECT_READ 0x00
+#define INDIRECT_WRITE 0x80
+
+#define INDIRECT_IO_MM 0
+#define INDIRECT_IO_PLL 1
+#define INDIRECT_IO_MC 2
+#define INDIRECT_IO_PCIE 3
+#define INDIRECT_IO_PCIEP 4
+#define INDIRECT_IO_NBMISC 5
+
+#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
+#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
+#define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
+#define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
+#define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
+#define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
+#define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
+#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
+#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
+#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
+
+typedef struct _ATOM_OEM_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+} ATOM_OEM_INFO;
+
+typedef struct _ATOM_TV_MODE {
+ UCHAR ucVMode_Num; /* Video mode number */
+ UCHAR ucTV_Mode_Num; /* Internal TV mode number */
+} ATOM_TV_MODE;
+
+typedef struct _ATOM_BIOS_INT_TVSTD_MODE {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usTV_Mode_LUT_Offset; /* Pointer to standard to internal number conversion table */
+ USHORT usTV_FIFO_Offset; /* Pointer to FIFO entry table */
+ USHORT usNTSC_Tbl_Offset; /* Pointer to SDTV_Mode_NTSC table */
+ USHORT usPAL_Tbl_Offset; /* Pointer to SDTV_Mode_PAL table */
+ USHORT usCV_Tbl_Offset; /* Pointer to SDTV_Mode_PAL table */
+} ATOM_BIOS_INT_TVSTD_MODE;
+
+typedef struct _ATOM_TV_MODE_SCALER_PTR {
+ USHORT ucFilter0_Offset; /* Pointer to filter format 0 coefficients */
+ USHORT usFilter1_Offset; /* Pointer to filter format 0 coefficients */
+ UCHAR ucTV_Mode_Num;
+} ATOM_TV_MODE_SCALER_PTR;
+
+typedef struct _ATOM_STANDARD_VESA_TIMING {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT aModeTimings[16]; /* 16 is not the real array number, just for initial allocation */
+} ATOM_STANDARD_VESA_TIMING;
+
+typedef struct _ATOM_STD_FORMAT {
+ USHORT usSTD_HDisp;
+ USHORT usSTD_VDisp;
+ USHORT usSTD_RefreshRate;
+ USHORT usReserved;
+} ATOM_STD_FORMAT;
+
+typedef struct _ATOM_VESA_TO_EXTENDED_MODE {
+ USHORT usVESA_ModeNumber;
+ USHORT usExtendedModeNumber;
+} ATOM_VESA_TO_EXTENDED_MODE;
+
+typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
+} ATOM_VESA_TO_INTENAL_MODE_LUT;
+
+/*************** ATOM Memory Related Data Structure ***********************/
+typedef struct _ATOM_MEMORY_VENDOR_BLOCK {
+ UCHAR ucMemoryType;
+ UCHAR ucMemoryVendor;
+ UCHAR ucAdjMCId;
+ UCHAR ucDynClkId;
+ ULONG ulDllResetClkRange;
+} ATOM_MEMORY_VENDOR_BLOCK;
+
+typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG {
+#if ATOM_BIG_ENDIAN
+ ULONG ucMemBlkId:8;
+ ULONG ulMemClockRange:24;
+#else
+ ULONG ulMemClockRange:24;
+ ULONG ucMemBlkId:8;
+#endif
+} ATOM_MEMORY_SETTING_ID_CONFIG;
+
+typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS {
+ ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
+ ULONG ulAccess;
+} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
+
+typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK {
+ ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
+ ULONG aulMemData[1];
+} ATOM_MEMORY_SETTING_DATA_BLOCK;
+
+typedef struct _ATOM_INIT_REG_INDEX_FORMAT {
+ USHORT usRegIndex; /* MC register index */
+ UCHAR ucPreRegDataLength; /* offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf */
+} ATOM_INIT_REG_INDEX_FORMAT;
+
+typedef struct _ATOM_INIT_REG_BLOCK {
+ USHORT usRegIndexTblSize; /* size of asRegIndexBuf */
+ USHORT usRegDataBlkSize; /* size of ATOM_MEMORY_SETTING_DATA_BLOCK */
+ ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
+ ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
+} ATOM_INIT_REG_BLOCK;
+
+#define END_OF_REG_INDEX_BLOCK 0x0ffff
+#define END_OF_REG_DATA_BLOCK 0x00000000
+#define ATOM_INIT_REG_MASK_FLAG 0x80
+#define CLOCK_RANGE_HIGHEST 0x00ffffff
+
+#define VALUE_DWORD SIZEOF ULONG
+#define VALUE_SAME_AS_ABOVE 0
+#define VALUE_MASK_DWORD 0x84
+
+#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
+#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
+#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
+
+typedef struct _ATOM_MC_INIT_PARAM_TABLE {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usAdjustARB_SEQDataOffset;
+ USHORT usMCInitMemTypeTblOffset;
+ USHORT usMCInitCommonTblOffset;
+ USHORT usMCInitPowerDownTblOffset;
+ ULONG ulARB_SEQDataBuf[32];
+ ATOM_INIT_REG_BLOCK asMCInitMemType;
+ ATOM_INIT_REG_BLOCK asMCInitCommon;
+} ATOM_MC_INIT_PARAM_TABLE;
+
+#define _4Mx16 0x2
+#define _4Mx32 0x3
+#define _8Mx16 0x12
+#define _8Mx32 0x13
+#define _16Mx16 0x22
+#define _16Mx32 0x23
+#define _32Mx16 0x32
+#define _32Mx32 0x33
+#define _64Mx8 0x41
+#define _64Mx16 0x42
+
+#define SAMSUNG 0x1
+#define INFINEON 0x2
+#define ELPIDA 0x3
+#define ETRON 0x4
+#define NANYA 0x5
+#define HYNIX 0x6
+#define MOSEL 0x7
+#define WINBOND 0x8
+#define ESMT 0x9
+#define MICRON 0xF
+
+#define QIMONDA INFINEON
+#define PROMOS MOSEL
+
+/* ///////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// */
+
+#define UCODE_ROM_START_ADDRESS 0x1c000
+#define UCODE_SIGNATURE 0x4375434d /* 'MCuC' - MC uCode */
+
+/* uCode block header for reference */
+
+typedef struct _MCuCodeHeader {
+ ULONG ulSignature;
+ UCHAR ucRevision;
+ UCHAR ucChecksum;
+ UCHAR ucReserved1;
+ UCHAR ucReserved2;
+ USHORT usParametersLength;
+ USHORT usUCodeLength;
+ USHORT usReserved1;
+ USHORT usReserved2;
+} MCuCodeHeader;
+
+/* //////////////////////////////////////////////////////////////////////////////// */
+
+#define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
+
+#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
+typedef struct _ATOM_VRAM_MODULE_V1 {
+ ULONG ulReserved;
+ USHORT usEMRSValue;
+ USHORT usMRSValue;
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+ UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; */
+ UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender */
+ UCHAR ucMemoryDeviceCfg; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
+ UCHAR ucRow; /* Number of Row,in power of 2; */
+ UCHAR ucColumn; /* Number of Column,in power of 2; */
+ UCHAR ucBank; /* Nunber of Bank; */
+ UCHAR ucRank; /* Number of Rank, in power of 2 */
+ UCHAR ucChannelNum; /* Number of channel; */
+ UCHAR ucChannelConfig; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
+ UCHAR ucDefaultMVDDQ_ID; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
+ UCHAR ucDefaultMVDDC_ID; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
+ UCHAR ucReserved[2];
+} ATOM_VRAM_MODULE_V1;
+
+typedef struct _ATOM_VRAM_MODULE_V2 {
+ ULONG ulReserved;
+ ULONG ulFlags; /* To enable/disable functionalities based on memory type */
+ ULONG ulEngineClock; /* Override of default engine clock for particular memory type */
+ ULONG ulMemoryClock; /* Override of default memory clock for particular memory type */
+ USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usEMRSValue;
+ USHORT usMRSValue;
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+ UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
+ UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
+ UCHAR ucMemoryDeviceCfg; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
+ UCHAR ucRow; /* Number of Row,in power of 2; */
+ UCHAR ucColumn; /* Number of Column,in power of 2; */
+ UCHAR ucBank; /* Nunber of Bank; */
+ UCHAR ucRank; /* Number of Rank, in power of 2 */
+ UCHAR ucChannelNum; /* Number of channel; */
+ UCHAR ucChannelConfig; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
+ UCHAR ucDefaultMVDDQ_ID; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
+ UCHAR ucDefaultMVDDC_ID; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
+ UCHAR ucRefreshRateFactor;
+ UCHAR ucReserved[3];
+} ATOM_VRAM_MODULE_V2;
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT {
+ ULONG ulClkRange; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
+ union {
+ USHORT usMRS; /* mode register */
+ USHORT usDDR3_MR0;
+ };
+ union {
+ USHORT usEMRS; /* extended mode register */
+ USHORT usDDR3_MR1;
+ };
+ UCHAR ucCL; /* CAS latency */
+ UCHAR ucWL; /* WRITE Latency */
+ UCHAR uctRAS; /* tRAS */
+ UCHAR uctRC; /* tRC */
+ UCHAR uctRFC; /* tRFC */
+ UCHAR uctRCDR; /* tRCDR */
+ UCHAR uctRCDW; /* tRCDW */
+ UCHAR uctRP; /* tRP */
+ UCHAR uctRRD; /* tRRD */
+ UCHAR uctWR; /* tWR */
+ UCHAR uctWTR; /* tWTR */
+ UCHAR uctPDIX; /* tPDIX */
+ UCHAR uctFAW; /* tFAW */
+ UCHAR uctAOND; /* tAOND */
+ union {
+ struct {
+ UCHAR ucflag; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */
+ UCHAR ucReserved;
+ };
+ USHORT usDDR3_MR2;
+ };
+} ATOM_MEMORY_TIMING_FORMAT;
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 {
+ ULONG ulClkRange; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
+ USHORT usMRS; /* mode register */
+ USHORT usEMRS; /* extended mode register */
+ UCHAR ucCL; /* CAS latency */
+ UCHAR ucWL; /* WRITE Latency */
+ UCHAR uctRAS; /* tRAS */
+ UCHAR uctRC; /* tRC */
+ UCHAR uctRFC; /* tRFC */
+ UCHAR uctRCDR; /* tRCDR */
+ UCHAR uctRCDW; /* tRCDW */
+ UCHAR uctRP; /* tRP */
+ UCHAR uctRRD; /* tRRD */
+ UCHAR uctWR; /* tWR */
+ UCHAR uctWTR; /* tWTR */
+ UCHAR uctPDIX; /* tPDIX */
+ UCHAR uctFAW; /* tFAW */
+ UCHAR uctAOND; /* tAOND */
+ UCHAR ucflag; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */
+/* ///////////////////////GDDR parameters/////////////////////////////////// */
+ UCHAR uctCCDL; /* */
+ UCHAR uctCRCRL; /* */
+ UCHAR uctCRCWL; /* */
+ UCHAR uctCKE; /* */
+ UCHAR uctCKRSE; /* */
+ UCHAR uctCKRSX; /* */
+ UCHAR uctFAW32; /* */
+ UCHAR ucReserved1; /* */
+ UCHAR ucReserved2; /* */
+ UCHAR ucTerminator;
+} ATOM_MEMORY_TIMING_FORMAT_V1;
+
+typedef struct _ATOM_MEMORY_FORMAT {
+ ULONG ulDllDisClock; /* memory DLL will be disable when target memory clock is below this clock */
+ union {
+ USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usDDR3_Reserved; /* Not used for DDR3 memory */
+ };
+ union {
+ USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usDDR3_MR3; /* Used for DDR3 memory */
+ };
+ UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
+ UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
+ UCHAR ucRow; /* Number of Row,in power of 2; */
+ UCHAR ucColumn; /* Number of Column,in power of 2; */
+ UCHAR ucBank; /* Nunber of Bank; */
+ UCHAR ucRank; /* Number of Rank, in power of 2 */
+ UCHAR ucBurstSize; /* burst size, 0= burst size=4 1= burst size=8 */
+ UCHAR ucDllDisBit; /* position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) */
+ UCHAR ucRefreshRateFactor; /* memory refresh rate in unit of ms */
+ UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+ UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */
+ UCHAR ucMemAttrib; /* Memory Device Addribute, like RDBI/WDBI etc */
+ ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */
+} ATOM_MEMORY_FORMAT;
+
+typedef struct _ATOM_VRAM_MODULE_V3 {
+ ULONG ulChannelMapCfg; /* board dependent paramenter:Channel combination */
+ USHORT usSize; /* size of ATOM_VRAM_MODULE_V3 */
+ USHORT usDefaultMVDDQ; /* board dependent parameter:Default Memory Core Voltage */
+ USHORT usDefaultMVDDC; /* board dependent parameter:Default Memory IO Voltage */
+ UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+ UCHAR ucChannelNum; /* board dependent parameter:Number of channel; */
+ UCHAR ucChannelSize; /* board dependent parameter:32bit or 64bit */
+ UCHAR ucVREFI; /* board dependnt parameter: EXT or INT +160mv to -140mv */
+ UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+ UCHAR ucFlag; /* To enable/disable functionalities based on memory type */
+ ATOM_MEMORY_FORMAT asMemory; /* describ all of video memory parameters from memory spec */
+} ATOM_VRAM_MODULE_V3;
+
+/* ATOM_VRAM_MODULE_V3.ucNPL_RT */
+#define NPL_RT_MASK 0x0f
+#define BATTERY_ODT_MASK 0xc0
+
+#define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
+
+typedef struct _ATOM_VRAM_MODULE_V4 {
+ ULONG ulChannelMapCfg; /* board dependent parameter: Channel combination */
+ USHORT usModuleSize; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
+ USHORT usPrivateReserved; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+ /* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+ UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
+ UCHAR ucChannelNum; /* Number of channels present in this module config */
+ UCHAR ucChannelWidth; /* 0 - 32 bits; 1 - 64 bits */
+ UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+ UCHAR ucFlag; /* To enable/disable functionalities based on memory type */
+ UCHAR ucMisc; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */
+ UCHAR ucVREFI; /* board dependent parameter */
+ UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+ UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */
+ UCHAR ucMemorySize; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+ /* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
+ UCHAR ucReserved[3];
+
+/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
+ union {
+ USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usDDR3_Reserved;
+ };
+ union {
+ USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usDDR3_MR3; /* Used for DDR3 memory */
+ };
+ UCHAR ucMemoryVenderID; /* Predefined, If not predefined, vendor detection table gets executed */
+ UCHAR ucRefreshRateFactor; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
+ UCHAR ucReserved2[2];
+ ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */
+} ATOM_VRAM_MODULE_V4;
+
+#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
+#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
+#define VRAM_MODULE_V4_MISC_BL_MASK 0x4
+#define VRAM_MODULE_V4_MISC_BL8 0x4
+#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
+
+typedef struct _ATOM_VRAM_MODULE_V5 {
+ ULONG ulChannelMapCfg; /* board dependent parameter: Channel combination */
+ USHORT usModuleSize; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
+ USHORT usPrivateReserved; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+ /* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+ UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
+ UCHAR ucChannelNum; /* Number of channels present in this module config */
+ UCHAR ucChannelWidth; /* 0 - 32 bits; 1 - 64 bits */
+ UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+ UCHAR ucFlag; /* To enable/disable functionalities based on memory type */
+ UCHAR ucMisc; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */
+ UCHAR ucVREFI; /* board dependent parameter */
+ UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+ UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */
+ UCHAR ucMemorySize; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+ /* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
+ UCHAR ucReserved[3];
+
+/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
+ USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+ USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+ UCHAR ucMemoryVenderID; /* Predefined, If not predefined, vendor detection table gets executed */
+ UCHAR ucRefreshRateFactor; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
+ UCHAR ucFIFODepth; /* FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth */
+ UCHAR ucCDR_Bandwidth; /* [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth */
+ ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */
+} ATOM_VRAM_MODULE_V5;
+
+typedef struct _ATOM_VRAM_INFO_V2 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+} ATOM_VRAM_INFO_V2;
+
+typedef struct _ATOM_VRAM_INFO_V3 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
+ USHORT usMemClkPatchTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
+ USHORT usRerseved;
+ UCHAR aVID_PinsShift[9]; /* 8 bit strap maximum+terminator */
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+ ATOM_INIT_REG_BLOCK asMemPatch; /* for allocation */
+ /* ATOM_INIT_REG_BLOCK aMemAdjust; */
+} ATOM_VRAM_INFO_V3;
+
+#define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
+
+typedef struct _ATOM_VRAM_INFO_V4 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
+ USHORT usMemClkPatchTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
+ USHORT usRerseved;
+ UCHAR ucMemDQ7_0ByteRemap; /* DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 */
+ ULONG ulMemDQ7_0BitRemap; /* each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] */
+ UCHAR ucReservde[4];
+ UCHAR ucNumOfVRAMModule;
+ ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+ ATOM_INIT_REG_BLOCK asMemPatch; /* for allocation */
+ /* ATOM_INIT_REG_BLOCK aMemAdjust; */
+} ATOM_VRAM_INFO_V4;
+
+typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR aVID_PinsShift[9]; /* 8 bit strap maximum+terminator */
+} ATOM_VRAM_GPIO_DETECTION_INFO;
+
+typedef struct _ATOM_MEMORY_TRAINING_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucTrainingLoop;
+ UCHAR ucReserved[3];
+ ATOM_INIT_REG_BLOCK asMemTrainingSetting;
+} ATOM_MEMORY_TRAINING_INFO;
+
+typedef struct SW_I2C_CNTL_DATA_PARAMETERS {
+ UCHAR ucControl;
+ UCHAR ucData;
+ UCHAR ucSatus;
+ UCHAR ucTemp;
+} SW_I2C_CNTL_DATA_PARAMETERS;
+
+#define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
+
+typedef struct _SW_I2C_IO_DATA_PARAMETERS {
+ USHORT GPIO_Info;
+ UCHAR ucAct;
+ UCHAR ucData;
+} SW_I2C_IO_DATA_PARAMETERS;
+
+#define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
+
+/****************************SW I2C CNTL DEFINITIONS**********************/
+#define SW_I2C_IO_RESET 0
+#define SW_I2C_IO_GET 1
+#define SW_I2C_IO_DRIVE 2
+#define SW_I2C_IO_SET 3
+#define SW_I2C_IO_START 4
+
+#define SW_I2C_IO_CLOCK 0
+#define SW_I2C_IO_DATA 0x80
+
+#define SW_I2C_IO_ZERO 0
+#define SW_I2C_IO_ONE 0x100
+
+#define SW_I2C_CNTL_READ 0
+#define SW_I2C_CNTL_WRITE 1
+#define SW_I2C_CNTL_START 2
+#define SW_I2C_CNTL_STOP 3
+#define SW_I2C_CNTL_OPEN 4
+#define SW_I2C_CNTL_CLOSE 5
+#define SW_I2C_CNTL_WRITE1BIT 6
+
+/* ==============================VESA definition Portion=============================== */
+#define VESA_OEM_PRODUCT_REV '01.00'
+#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB /* refer to VBE spec p.32, no TTY support */
+#define VESA_MODE_WIN_ATTRIBUTE 7
+#define VESA_WIN_SIZE 64
+
+typedef struct _PTR_32_BIT_STRUCTURE {
+ USHORT Offset16;
+ USHORT Segment16;
+} PTR_32_BIT_STRUCTURE;
+
+typedef union _PTR_32_BIT_UNION {
+ PTR_32_BIT_STRUCTURE SegmentOffset;
+ ULONG Ptr32_Bit;
+} PTR_32_BIT_UNION;
+
+typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE {
+ UCHAR VbeSignature[4];
+ USHORT VbeVersion;
+ PTR_32_BIT_UNION OemStringPtr;
+ UCHAR Capabilities[4];
+ PTR_32_BIT_UNION VideoModePtr;
+ USHORT TotalMemory;
+} VBE_1_2_INFO_BLOCK_UPDATABLE;
+
+typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE {
+ VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
+ USHORT OemSoftRev;
+ PTR_32_BIT_UNION OemVendorNamePtr;
+ PTR_32_BIT_UNION OemProductNamePtr;
+ PTR_32_BIT_UNION OemProductRevPtr;
+} VBE_2_0_INFO_BLOCK_UPDATABLE;
+
+typedef union _VBE_VERSION_UNION {
+ VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
+ VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
+} VBE_VERSION_UNION;
+
+typedef struct _VBE_INFO_BLOCK {
+ VBE_VERSION_UNION UpdatableVBE_Info;
+ UCHAR Reserved[222];
+ UCHAR OemData[256];
+} VBE_INFO_BLOCK;
+
+typedef struct _VBE_FP_INFO {
+ USHORT HSize;
+ USHORT VSize;
+ USHORT FPType;
+ UCHAR RedBPP;
+ UCHAR GreenBPP;
+ UCHAR BlueBPP;
+ UCHAR ReservedBPP;
+ ULONG RsvdOffScrnMemSize;
+ ULONG RsvdOffScrnMEmPtr;
+ UCHAR Reserved[14];
+} VBE_FP_INFO;
+
+typedef struct _VESA_MODE_INFO_BLOCK {
+/* Mandatory information for all VBE revisions */
+ USHORT ModeAttributes; /* dw ? ; mode attributes */
+ UCHAR WinAAttributes; /* db ? ; window A attributes */
+ UCHAR WinBAttributes; /* db ? ; window B attributes */
+ USHORT WinGranularity; /* dw ? ; window granularity */
+ USHORT WinSize; /* dw ? ; window size */
+ USHORT WinASegment; /* dw ? ; window A start segment */
+ USHORT WinBSegment; /* dw ? ; window B start segment */
+ ULONG WinFuncPtr; /* dd ? ; real mode pointer to window function */
+ USHORT BytesPerScanLine; /* dw ? ; bytes per scan line */
+
+/* ; Mandatory information for VBE 1.2 and above */
+ USHORT XResolution; /* dw ? ; horizontal resolution in pixels or characters */
+ USHORT YResolution; /* dw ? ; vertical resolution in pixels or characters */
+ UCHAR XCharSize; /* db ? ; character cell width in pixels */
+ UCHAR YCharSize; /* db ? ; character cell height in pixels */
+ UCHAR NumberOfPlanes; /* db ? ; number of memory planes */
+ UCHAR BitsPerPixel; /* db ? ; bits per pixel */
+ UCHAR NumberOfBanks; /* db ? ; number of banks */
+ UCHAR MemoryModel; /* db ? ; memory model type */
+ UCHAR BankSize; /* db ? ; bank size in KB */
+ UCHAR NumberOfImagePages; /* db ? ; number of images */
+ UCHAR ReservedForPageFunction; /* db 1 ; reserved for page function */
+
+/* ; Direct Color fields(required for direct/6 and YUV/7 memory models) */
+ UCHAR RedMaskSize; /* db ? ; size of direct color red mask in bits */
+ UCHAR RedFieldPosition; /* db ? ; bit position of lsb of red mask */
+ UCHAR GreenMaskSize; /* db ? ; size of direct color green mask in bits */
+ UCHAR GreenFieldPosition; /* db ? ; bit position of lsb of green mask */
+ UCHAR BlueMaskSize; /* db ? ; size of direct color blue mask in bits */
+ UCHAR BlueFieldPosition; /* db ? ; bit position of lsb of blue mask */
+ UCHAR RsvdMaskSize; /* db ? ; size of direct color reserved mask in bits */
+ UCHAR RsvdFieldPosition; /* db ? ; bit position of lsb of reserved mask */
+ UCHAR DirectColorModeInfo; /* db ? ; direct color mode attributes */
+
+/* ; Mandatory information for VBE 2.0 and above */
+ ULONG PhysBasePtr; /* dd ? ; physical address for flat memory frame buffer */
+ ULONG Reserved_1; /* dd 0 ; reserved - always set to 0 */
+ USHORT Reserved_2; /* dw 0 ; reserved - always set to 0 */
+
+/* ; Mandatory information for VBE 3.0 and above */
+ USHORT LinBytesPerScanLine; /* dw ? ; bytes per scan line for linear modes */
+ UCHAR BnkNumberOfImagePages; /* db ? ; number of images for banked modes */
+ UCHAR LinNumberOfImagPages; /* db ? ; number of images for linear modes */
+ UCHAR LinRedMaskSize; /* db ? ; size of direct color red mask(linear modes) */
+ UCHAR LinRedFieldPosition; /* db ? ; bit position of lsb of red mask(linear modes) */
+ UCHAR LinGreenMaskSize; /* db ? ; size of direct color green mask(linear modes) */
+ UCHAR LinGreenFieldPosition; /* db ? ; bit position of lsb of green mask(linear modes) */
+ UCHAR LinBlueMaskSize; /* db ? ; size of direct color blue mask(linear modes) */
+ UCHAR LinBlueFieldPosition; /* db ? ; bit position of lsb of blue mask(linear modes) */
+ UCHAR LinRsvdMaskSize; /* db ? ; size of direct color reserved mask(linear modes) */
+ UCHAR LinRsvdFieldPosition; /* db ? ; bit position of lsb of reserved mask(linear modes) */
+ ULONG MaxPixelClock; /* dd ? ; maximum pixel clock(in Hz) for graphics mode */
+ UCHAR Reserved; /* db 190 dup (0) */
+} VESA_MODE_INFO_BLOCK;
+
+/* BIOS function CALLS */
+#define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 /* ATI Extended Function code */
+#define ATOM_BIOS_FUNCTION_COP_MODE 0x00
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
+#define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
+#define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
+#define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
+#define ATOM_BIOS_FUNCTION_STV_STD 0x16
+#define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
+#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
+
+#define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
+#define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
+#define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
+#define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 /* Sub function 80 */
+#define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 /* Sub function 80 */
+
+#define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
+#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
+#define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
+#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 /* Sub function 03 */
+#define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 /* Sub function 7 */
+#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 /* Notify caller the current thermal state */
+#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 /* Notify caller the current critical state */
+#define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 /* Sub function 85 */
+#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900 /* Sub function 89 */
+#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 /* Notify caller that ADC is supported */
+
+#define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 /* Set DPMS */
+#define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 /* BL: Sub function 01 */
+#define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 /* BL: Sub function 02 */
+#define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 /* BH Parameter for DPMS ON. */
+#define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 /* BH Parameter for DPMS STANDBY */
+#define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 /* BH Parameter for DPMS SUSPEND */
+#define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 /* BH Parameter for DPMS OFF */
+#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 /* BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) */
+
+#define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
+#define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
+#define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
+
+/* structure used for VBIOS only */
+
+/* DispOutInfoTable */
+typedef struct _ASIC_TRANSMITTER_INFO {
+ USHORT usTransmitterObjId;
+ USHORT usSupportDevice;
+ UCHAR ucTransmitterCmdTblId;
+ UCHAR ucConfig;
+ UCHAR ucEncoderID; /* available 1st encoder ( default ) */
+ UCHAR ucOptionEncoderID; /* available 2nd encoder ( optional ) */
+ UCHAR uc2ndEncoderID;
+ UCHAR ucReserved;
+} ASIC_TRANSMITTER_INFO;
+
+typedef struct _ASIC_ENCODER_INFO {
+ UCHAR ucEncoderID;
+ UCHAR ucEncoderConfig;
+ USHORT usEncoderCmdTblId;
+} ASIC_ENCODER_INFO;
+
+typedef struct _ATOM_DISP_OUT_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT ptrTransmitterInfo;
+ USHORT ptrEncoderInfo;
+ ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
+ ASIC_ENCODER_INFO asEncoderInfo[1];
+} ATOM_DISP_OUT_INFO;
+
+/* DispDevicePriorityInfo */
+typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT asDevicePriority[16];
+} ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
+
+/* ProcessAuxChannelTransactionTable */
+typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS {
+ USHORT lpAuxRequest;
+ USHORT lpDataOut;
+ UCHAR ucChannelID;
+ union {
+ UCHAR ucReplyStatus;
+ UCHAR ucDelay;
+ };
+ UCHAR ucDataOutLen;
+ UCHAR ucReserved;
+} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
+
+#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
+
+/* GetSinkType */
+
+typedef struct _DP_ENCODER_SERVICE_PARAMETERS {
+ USHORT ucLinkClock;
+ union {
+ UCHAR ucConfig; /* for DP training command */
+ UCHAR ucI2cId; /* use for GET_SINK_TYPE command */
+ };
+ UCHAR ucAction;
+ UCHAR ucStatus;
+ UCHAR ucLaneNum;
+ UCHAR ucReserved[2];
+} DP_ENCODER_SERVICE_PARAMETERS;
+
+/* ucAction */
+#define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
+#define ATOM_DP_ACTION_TRAINING_START 0x02
+#define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03
+#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04
+#define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05
+#define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06
+#define ATOM_DP_ACTION_BLANKING 0x07
+
+/* ucConfig */
+#define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03
+#define ATOM_DP_CONFIG_DIG1_ENCODER 0x00
+#define ATOM_DP_CONFIG_DIG2_ENCODER 0x01
+#define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02
+#define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04
+#define ATOM_DP_CONFIG_LINK_A 0x00
+#define ATOM_DP_CONFIG_LINK_B 0x04
+
+#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+/* DP_TRAINING_TABLE */
+#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
+#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
+#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16)
+#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24)
+#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
+#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
+#define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
+#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
+#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
+#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
+#define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
+#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
+
+typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS {
+ UCHAR ucI2CSpeed;
+ union {
+ UCHAR ucRegIndex;
+ UCHAR ucStatus;
+ };
+ USHORT lpI2CDataOut;
+ UCHAR ucFlag;
+ UCHAR ucTransBytes;
+ UCHAR ucSlaveAddr;
+ UCHAR ucLineNumber;
+} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
+
+#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
+
+/* ucFlag */
+#define HW_I2C_WRITE 1
+#define HW_I2C_READ 0
+
+/****************************************************************************/
+/* Portion VI: Definitinos being oboselete */
+/****************************************************************************/
+
+/* ========================================================================================== */
+/* Remove the definitions below when driver is ready! */
+typedef struct _ATOM_DAC_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMaxFrequency; /* in 10kHz unit */
+ USHORT usReserved;
+} ATOM_DAC_INFO;
+
+typedef struct _COMPASSIONATE_DATA {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+
+ /* ============================== DAC1 portion */
+ UCHAR ucDAC1_BG_Adjustment;
+ UCHAR ucDAC1_DAC_Adjustment;
+ USHORT usDAC1_FORCE_Data;
+ /* ============================== DAC2 portion */
+ UCHAR ucDAC2_CRT2_BG_Adjustment;
+ UCHAR ucDAC2_CRT2_DAC_Adjustment;
+ USHORT usDAC2_CRT2_FORCE_Data;
+ USHORT usDAC2_CRT2_MUX_RegisterIndex;
+ UCHAR ucDAC2_CRT2_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+ UCHAR ucDAC2_NTSC_BG_Adjustment;
+ UCHAR ucDAC2_NTSC_DAC_Adjustment;
+ USHORT usDAC2_TV1_FORCE_Data;
+ USHORT usDAC2_TV1_MUX_RegisterIndex;
+ UCHAR ucDAC2_TV1_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+ UCHAR ucDAC2_CV_BG_Adjustment;
+ UCHAR ucDAC2_CV_DAC_Adjustment;
+ USHORT usDAC2_CV_FORCE_Data;
+ USHORT usDAC2_CV_MUX_RegisterIndex;
+ UCHAR ucDAC2_CV_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+ UCHAR ucDAC2_PAL_BG_Adjustment;
+ UCHAR ucDAC2_PAL_DAC_Adjustment;
+ USHORT usDAC2_TV2_FORCE_Data;
+} COMPASSIONATE_DATA;
+
+/****************************Supported Device Info Table Definitions**********************/
+/* ucConnectInfo: */
+/* [7:4] - connector type */
+/* = 1 - VGA connector */
+/* = 2 - DVI-I */
+/* = 3 - DVI-D */
+/* = 4 - DVI-A */
+/* = 5 - SVIDEO */
+/* = 6 - COMPOSITE */
+/* = 7 - LVDS */
+/* = 8 - DIGITAL LINK */
+/* = 9 - SCART */
+/* = 0xA - HDMI_type A */
+/* = 0xB - HDMI_type B */
+/* = 0xE - Special case1 (DVI+DIN) */
+/* Others=TBD */
+/* [3:0] - DAC Associated */
+/* = 0 - no DAC */
+/* = 1 - DACA */
+/* = 2 - DACB */
+/* = 3 - External DAC */
+/* Others=TBD */
+/* */
+
+typedef struct _ATOM_CONNECTOR_INFO {
+#if ATOM_BIG_ENDIAN
+ UCHAR bfConnectorType:4;
+ UCHAR bfAssociatedDAC:4;
+#else
+ UCHAR bfAssociatedDAC:4;
+ UCHAR bfConnectorType:4;
+#endif
+} ATOM_CONNECTOR_INFO;
+
+typedef union _ATOM_CONNECTOR_INFO_ACCESS {
+ ATOM_CONNECTOR_INFO sbfAccess;
+ UCHAR ucAccess;
+} ATOM_CONNECTOR_INFO_ACCESS;
+
+typedef struct _ATOM_CONNECTOR_INFO_I2C {
+ ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+} ATOM_CONNECTOR_INFO_I2C;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
+} ATOM_SUPPORTED_DEVICES_INFO;
+
+#define NO_INT_SRC_MAPPED 0xFF
+
+typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP {
+ UCHAR ucIntSrcBitmap;
+} ATOM_CONNECTOR_INC_SRC_BITMAP;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+ ATOM_CONNECTOR_INC_SRC_BITMAP
+ asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+} ATOM_SUPPORTED_DEVICES_INFO_2;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDeviceSupport;
+ ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
+ ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
+} ATOM_SUPPORTED_DEVICES_INFO_2d1;
+
+#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
+
+typedef struct _ATOM_MISC_CONTROL_INFO {
+ USHORT usFrequency;
+ UCHAR ucPLL_ChargePump; /* PLL charge-pump gain control */
+ UCHAR ucPLL_DutyCycle; /* PLL duty cycle control */
+ UCHAR ucPLL_VCO_Gain; /* PLL VCO gain control */
+ UCHAR ucPLL_VoltageSwing; /* PLL driver voltage swing control */
+} ATOM_MISC_CONTROL_INFO;
+
+#define ATOM_MAX_MISC_INFO 4
+
+typedef struct _ATOM_TMDS_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMaxFrequency; /* in 10Khz */
+ ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
+} ATOM_TMDS_INFO;
+
+typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE {
+ UCHAR ucTVStandard; /* Same as TV standards defined above, */
+ UCHAR ucPadding[1];
+} ATOM_ENCODER_ANALOG_ATTRIBUTE;
+
+typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE {
+ UCHAR ucAttribute; /* Same as other digital encoder attributes defined above */
+ UCHAR ucPadding[1];
+} ATOM_ENCODER_DIGITAL_ATTRIBUTE;
+
+typedef union _ATOM_ENCODER_ATTRIBUTE {
+ ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
+ ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
+} ATOM_ENCODER_ATTRIBUTE;
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS {
+ USHORT usPixelClock;
+ USHORT usEncoderID;
+ UCHAR ucDeviceType; /* Use ATOM_DEVICE_xxx1_Index to indicate device type only. */
+ UCHAR ucAction; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
+ ATOM_ENCODER_ATTRIBUTE usDevAttr;
+} DVO_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION {
+ DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
+ WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */
+} DVO_ENCODER_CONTROL_PS_ALLOCATION;
+
+#define ATOM_XTMDS_ASIC_SI164_ID 1
+#define ATOM_XTMDS_ASIC_SI178_ID 2
+#define ATOM_XTMDS_ASIC_TFP513_ID 3
+#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
+#define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
+#define ATOM_XTMDS_MVPU_FPGA 0x00000004
+
+typedef struct _ATOM_XTMDS_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usSingleLinkMaxFrequency;
+ ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; /* Point the ID on which I2C is used to control external chip */
+ UCHAR ucXtransimitterID;
+ UCHAR ucSupportedLink; /* Bit field, bit0=1, single link supported;bit1=1,dual link supported */
+ UCHAR ucSequnceAlterID; /* Even with the same external TMDS asic, it's possible that the program seqence alters */
+ /* due to design. This ID is used to alert driver that the sequence is not "standard"! */
+ UCHAR ucMasterAddress; /* Address to control Master xTMDS Chip */
+ UCHAR ucSlaveAddress; /* Address to control Slave xTMDS Chip */
+} ATOM_XTMDS_INFO;
+
+typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS {
+ UCHAR ucEnable; /* ATOM_ENABLE=On or ATOM_DISABLE=Off */
+ UCHAR ucDevice; /* ATOM_DEVICE_DFP1_INDEX.... */
+ UCHAR ucPadding[2];
+} DFP_DPMS_STATUS_CHANGE_PARAMETERS;
+
+/****************************Legacy Power Play Table Definitions **********************/
+
+/* Definitions for ulPowerPlayMiscInfo */
+#define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
+#define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
+#define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
+
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
+
+#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
+
+#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
+#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
+#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L /* When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program */
+
+#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
+#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
+#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
+#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
+#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
+#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
+#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
+
+#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
+#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
+#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
+#define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
+#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
+
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L /* 0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved */
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
+
+#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
+#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L /* When set, Dynamic */
+#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L /* When set, Dynamic */
+#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L /* When set, This mode is for acceleated 3D mode */
+
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L /* 1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) */
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
+#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
+
+#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
+#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
+#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
+#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
+#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
+#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
+#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L /* If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. */
+ /* If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback */
+#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
+#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
+#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_POWERMODE_INFO {
+ ULONG ulMiscInfo; /* The power level should be arranged in ascending order */
+ ULONG ulReserved1; /* must set to 0 */
+ ULONG ulReserved2; /* must set to 0 */
+ USHORT usEngineClock;
+ USHORT usMemoryClock;
+ UCHAR ucVoltageDropIndex; /* index to GPIO table */
+ UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; /* number of PCIE lanes */
+} ATOM_POWERMODE_INFO;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_POWERMODE_INFO_V2 {
+ ULONG ulMiscInfo; /* The power level should be arranged in ascending order */
+ ULONG ulMiscInfo2;
+ ULONG ulEngineClock;
+ ULONG ulMemoryClock;
+ UCHAR ucVoltageDropIndex; /* index to GPIO table */
+ UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; /* number of PCIE lanes */
+} ATOM_POWERMODE_INFO_V2;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_POWERMODE_INFO_V3 {
+ ULONG ulMiscInfo; /* The power level should be arranged in ascending order */
+ ULONG ulMiscInfo2;
+ ULONG ulEngineClock;
+ ULONG ulMemoryClock;
+ UCHAR ucVoltageDropIndex; /* index to Core (VDDC) votage table */
+ UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucNumPciELanes; /* number of PCIE lanes */
+ UCHAR ucVDDCI_VoltageDropIndex; /* index to VDDCI votage table */
+} ATOM_POWERMODE_INFO_V3;
+
+#define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
+
+#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
+#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
+
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 /* Andigilog */
+
+typedef struct _ATOM_POWERPLAY_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO;
+
+typedef struct _ATOM_POWERPLAY_INFO_V2 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO_V2;
+
+typedef struct _ATOM_POWERPLAY_INFO_V3 {
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ UCHAR ucOverdriveThermalController;
+ UCHAR ucOverdriveI2cLine;
+ UCHAR ucOverdriveIntBitmap;
+ UCHAR ucOverdriveControllerAddress;
+ UCHAR ucSizeOfPowerModeEntry;
+ UCHAR ucNumOfPowerModeEntries;
+ ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO_V3;
+
+/**************************************************************************/
+
+/* Following definitions are for compatiblity issue in different SW components. */
+#define ATOM_MASTER_DATA_TABLE_REVISION 0x01
+#define Object_Info Object_Header
+#define AdjustARB_SEQ MC_InitParameter
+#define VRAM_GPIO_DetectionInfo VoltageObjectInfo
+#define ASIC_VDDCI_Info ASIC_ProfilingInfo
+#define ASIC_MVDDQ_Info MemoryTrainingInfo
+#define SS_Info PPLL_SS_Info
+#define ASIC_MVDDC_Info ASIC_InternalSS_Info
+#define DispDevicePriorityInfo SaveRestoreInfo
+#define DispOutInfo TV_VideoMode
+
+#define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
+#define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
+
+/* New device naming, remove them when both DAL/VBIOS is ready */
+#define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
+#define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
+
+#define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
+#define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
+
+#define ATOM_DEVICE_DFP2I_INDEX 0x00000009
+#define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
+
+#define ATOM_S0_DFP1I ATOM_S0_DFP1
+#define ATOM_S0_DFP1X ATOM_S0_DFP2
+
+#define ATOM_S0_DFP2I 0x00200000L
+#define ATOM_S0_DFP2Ib2 0x20
+
+#define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
+#define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
+
+#define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
+#define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
+
+#define ATOM_S3_DFP2I_ACTIVEb1 0x02
+
+#define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
+#define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
+
+#define ATOM_S3_DFP2I_ACTIVE 0x00000200L
+
+#define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
+#define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
+#define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
+
+#define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
+#define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
+
+#define ATOM_S5_DOS_REQ_DFP2I 0x0200
+#define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
+#define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
+
+#define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
+#define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
+
+#define TMDS1XEncoderControl DVOEncoderControl
+#define DFP1XOutputControl DVOOutputControl
+
+#define ExternalDFPOutputControl DFP1XOutputControl
+#define EnableExternalTMDS_Encoder TMDS1XEncoderControl
+
+#define DFP1IOutputControl TMDSAOutputControl
+#define DFP2IOutputControl LVTMAOutputControl
+
+#define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define ucDac1Standard ucDacStandard
+#define ucDac2Standard ucDacStandard
+
+#define TMDS1EncoderControl TMDSAEncoderControl
+#define TMDS2EncoderControl LVTMAEncoderControl
+
+#define DFP1OutputControl TMDSAOutputControl
+#define DFP2OutputControl LVTMAOutputControl
+#define CRT1OutputControl DAC1OutputControl
+#define CRT2OutputControl DAC2OutputControl
+
+/* These two lines will be removed for sure in a few days, will follow up with Michael V. */
+#define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
+#define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+/*********************************************************************************/
+
+#pragma pack() /* BIOS data must use byte aligment */
+
+#endif /* _ATOMBIOS_H */