diff options
Diffstat (limited to 'drivers/gpu/drm')
26 files changed, 47 insertions, 47 deletions
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 799e1490cf2..872747c5a54 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1699,7 +1699,7 @@ int drm_mode_addfb(struct drm_device *dev, mutex_lock(&dev->mode_config.mutex); - /* TODO check buffer is sufficently large */ + /* TODO check buffer is sufficiently large */ /* TODO setup destructor callback */ fb = dev->mode_config.funcs->fb_create(dev, file_priv, r); @@ -1750,7 +1750,7 @@ int drm_mode_rmfb(struct drm_device *dev, mutex_lock(&dev->mode_config.mutex); obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB); - /* TODO check that we realy get a framebuffer back. */ + /* TODO check that we really get a framebuffer back. */ if (!obj) { DRM_ERROR("mode invalid framebuffer id\n"); ret = -EINVAL; diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index add1737dae0..5d00b0fc0d9 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -551,7 +551,7 @@ EXPORT_SYMBOL(drm_mm_scan_add_block); * corrupted. * * When the scan list is empty, the selected memory nodes can be freed. An - * immediatly following drm_mm_search_free with best_match = 0 will then return + * immediately following drm_mm_search_free with best_match = 0 will then return * the just freed block (because its at the top of the free_stack list). * * Returns one if this block should be evicted, zero otherwise. Will always diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5004724ea57..1c1b27c97e5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -630,7 +630,7 @@ typedef struct drm_i915_private { * Flag if the hardware appears to be wedged. * * This is set when attempts to idle the device timeout. - * It prevents command submission from occuring and makes + * It prevents command submission from occurring and makes * every pending request fail */ atomic_t wedged; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0daefca5cbb..cb8578b7e44 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -213,7 +213,7 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - /* only refuse the mode on non eDP since we have seen some wierd eDP panels + /* only refuse the mode on non eDP since we have seen some weird eDP panels which are outside spec tolerances but somehow work by magic */ if (!is_edp(intel_dp) && (intel_dp_link_required(connector->dev, intel_dp, mode->clock) diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index a386b022e53..4f4e23bc2d1 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -230,7 +230,7 @@ struct intel_sdvo_set_target_input_args { } __attribute__((packed)); /** - * Takes a struct intel_sdvo_output_flags of which outputs are targetted by + * Takes a struct intel_sdvo_output_flags of which outputs are targeted by * future output commands. * * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c index 1e1eb1d7e97..5ccb65deb83 100644 --- a/drivers/gpu/drm/mga/mga_dma.c +++ b/drivers/gpu/drm/mga/mga_dma.c @@ -426,7 +426,7 @@ int mga_driver_load(struct drm_device *dev, unsigned long flags) * Bootstrap the driver for AGP DMA. * * \todo - * Investigate whether there is any benifit to storing the WARP microcode in + * Investigate whether there is any benefit to storing the WARP microcode in * AGP memory. If not, the microcode may as well always be put in PCI * memory. * diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 3837090d66a..4cea35c57d1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -200,7 +200,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, /* disable the fifo caches */ pfifo->reassign(dev, false); - /* Construct inital RAMFC for new channel */ + /* Construct initial RAMFC for new channel */ ret = pfifo->create_context(chan); if (ret) { nouveau_channel_put(&chan); @@ -278,7 +278,7 @@ nouveau_channel_put_unlocked(struct nouveau_channel **pchan) return; } - /* noone wants the channel anymore */ + /* no one wants the channel anymore */ NV_DEBUG(dev, "freeing channel %d\n", chan->id); nouveau_debugfs_channel_fini(chan); diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index fff180a9986..57e5302503d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -216,7 +216,7 @@ struct nouveau_channel { /* mapping of the fifo itself */ struct drm_local_map *map; - /* mapping of the regs controling the fifo */ + /* mapping of the regs controlling the fifo */ void __iomem *user; uint32_t user_get; uint32_t user_put; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 4fcbd091a11..5bb2859001e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -963,7 +963,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) if (ret) goto err_mmio; - /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */ + /* Map PRAMIN BAR, or on older cards, the aperture within BAR0 */ if (dev_priv->card_type >= NV_40) { int ramin_bar = 2; if (pci_resource_len(dev->pdev, ramin_bar) == 0) diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index a260fbbe3d9..748b9d9c294 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -164,7 +164,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode) NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, nv_crtc->index); - if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ + if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */ return; nv_crtc->last_dpms = mode; @@ -677,7 +677,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc) NVBlankScreen(dev, nv_crtc->index, true); - /* Some more preperation. */ + /* Some more preparation. */ NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA); if (dev_priv->card_type == NV_40) { uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900); diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 18d30c2c1aa..fceb44c0ec7 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -181,7 +181,7 @@ nv40_graph_load_context(struct nouveau_channel *chan) NV40_PGRAPH_CTXCTL_CUR_LOADED); /* 0x32E0 records the instance address of the active FIFO's PGRAPH * context. If at any time this doesn't match 0x40032C, you will - * recieve PGRAPH_INTR_CONTEXT_SWITCH + * receive PGRAPH_INTR_CONTEXT_SWITCH */ nv_wr32(dev, NV40_PFIFO_GRCTX_INSTANCE, inst); return 0; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 04b269d14a5..7fd88497b93 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -738,13 +738,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:3; UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz #else UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz UCHAR ucReserved:3; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V3; @@ -785,13 +785,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:2; UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version #else UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version UCHAR ucReserved:2; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V4; @@ -2126,7 +2126,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO // Structures used in FirmwareInfoTable /****************************************************************************/ -// usBIOSCapability Defintion: +// usBIOSCapability Definition: // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; @@ -3341,7 +3341,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO /****************************************************************************/ // Structure used in AnalogTV_InfoTable (Top level) /****************************************************************************/ -//ucTVBootUpDefaultStd definiton: +//ucTVBootUpDefaultStd definition: //ATOM_TV_NTSC 1 //ATOM_TV_NTSCJ 2 @@ -3816,7 +3816,7 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO UCHAR Reserved [6]; // for potential expansion }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; -//Related definitions, all records are differnt but they have a commond header +//Related definitions, all records are different but they have a commond header typedef struct _ATOM_COMMON_RECORD_HEADER { UCHAR ucRecordType; //An emun to indicate the record type @@ -4365,14 +4365,14 @@ ucUMAChannelNumber: System memory channel numbers. ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. -sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. -usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. -usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. @@ -4555,7 +4555,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4 -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S0_CRT1_MONOb0 0x01 #define ATOM_S0_CRT1_COLORb0 0x02 #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) @@ -4621,7 +4621,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF #define ATOM_S2_DEVICE_DPMS_STATEb2 0x01 @@ -4671,7 +4671,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S3_CRT1_ACTIVEb0 0x01 #define ATOM_S3_LCD1_ACTIVEb0 0x02 #define ATOM_S3_TV1_ACTIVEb0 0x04 @@ -4707,7 +4707,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L #define ATOM_S4_LCD1_REFRESH_SHIFT 8 -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 @@ -4786,7 +4786,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S6_DEVICE_CHANGEb0 0x01 #define ATOM_S6_SCALER_CHANGEb0 0x02 #define ATOM_S6_LID_CHANGEb0 0x04 @@ -5027,7 +5027,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION typedef struct _MEMORY_CLEAN_UP_PARAMETERS { - USHORT usMemoryStart; //in 8Kb boundry, offset from memory base address + USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address USHORT usMemorySize; //8Kb blocks aligned }MEMORY_CLEAN_UP_PARAMETERS; #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS @@ -6855,7 +6855,7 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table /**************************************************************************/ -// Following definitions are for compatiblity issue in different SW components. +// Following definitions are for compatibility issue in different SW components. #define ATOM_MASTER_DATA_TABLE_REVISION 0x01 #define Object_Info Object_Header #define AdjustARB_SEQ MC_InitParameter diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index edde90b3755..23d36417158 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -442,7 +442,7 @@ static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u3 } ib = p->ib->ptr; switch (reg) { - /* force following reg to 0 in an attemp to disable out buffer + /* force following reg to 0 in an attempt to disable out buffer * which will need us to better understand how it works to perform * security check on it (Jerome) */ diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 8713731fa01..55a7f190027 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -437,7 +437,7 @@ int r300_asic_reset(struct radeon_device *rdev) status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* resetting the CP seems to be problematic sometimes it end up - * hard locking the computer, but it's necessary for successfull + * hard locking the computer, but it's necessary for successful * reset more test & playing is needed on R3XX/R4XX to find a * reliable (if any solution) */ diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index f0bce399c9f..00c0d2ba22d 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -608,7 +608,7 @@ * My guess is that there are two bits for each zbias primitive * (FILL, LINE, POINT). * One to enable depth test and one for depth write. - * Yet this doesnt explain why depth writes work ... + * Yet this doesn't explain why depth writes work ... */ #define R300_RE_OCCLUSION_CNTL 0x42B4 # define R300_OCCLUSION_ON (1<<1) @@ -817,7 +817,7 @@ # define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) # define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) -/* NOTE: NEAREST doesnt seem to exist. +/* NOTE: NEAREST doesn't seem to exist. * Im not seting MAG_FILTER_MASK and (3 << 11) on for all * anisotropy modes because that would void selected mag filter */ diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 3324620b2db..fd18be9871a 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -921,7 +921,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx return 0; ib = p->ib->ptr; switch (reg) { - /* force following reg to 0 in an attemp to disable out buffer + /* force following reg to 0 in an attempt to disable out buffer * which will need us to better understand how it works to perform * security check on it (Jerome) */ diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 50db6d62eec..f5ac7e788d8 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -334,7 +334,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod r600_hdmi_videoinfoframe(encoder, RGB, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); - /* it's unknown what these bits do excatly, but it's indeed quite usefull for debugging */ + /* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */ WREG32(offset+R600_HDMI_AUDIO_DEBUG_0, 0x00FFFFFF); WREG32(offset+R600_HDMI_AUDIO_DEBUG_1, 0x007FFFFF); WREG32(offset+R600_HDMI_AUDIO_DEBUG_2, 0x00000001); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cfe3af1a793..93f536594c7 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -679,11 +679,11 @@ struct radeon_wb { * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP) * @ht_bandwidth: ht bandwidth the gpu has (MByte/s) (IGP) * @core_bandwidth: core GPU bandwidth the gpu has (MByte/s) (IGP) - * @sclk: GPU clock Mhz (core bandwith depends of this clock) + * @sclk: GPU clock Mhz (core bandwidth depends of this clock) * @needed_bandwidth: current bandwidth needs * * It keeps track of various data needed to take powermanagement decision. - * Bandwith need is used to determine minimun clock of the GPU and memory. + * Bandwidth need is used to determine minimun clock of the GPU and memory. * Equation between gpu/memory clock and available bandwidth is hw dependent * (type of memory, bus size, efficiency, ...) */ diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 3d599e33b9c..75867792a4e 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -244,7 +244,7 @@ void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) u32 agp_base_lo = agp_base & 0xffffffff; u32 r6xx_agp_base = (agp_base >> 22) & 0x3ffff; - /* R6xx/R7xx must be aligned to a 4MB boundry */ + /* R6xx/R7xx must be aligned to a 4MB boundary */ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV770) RADEON_WRITE(R700_MC_VM_AGP_BASE, r6xx_agp_base); else if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 017ac54920f..bdf2fa1189a 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -226,7 +226,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, y += crtc->y; DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y); - /* avivo cursor image can't end on 128 pixel boundry or + /* avivo cursor image can't end on 128 pixel boundary or * go past the end of the frame if both crtcs are enabled */ list_for_each_entry(crtc_p, &crtc->dev->mode_config.crtc_list, head) { diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f0209be7a34..890217e678d 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -262,7 +262,7 @@ int radeon_wb_init(struct radeon_device *rdev) * Note: GTT start, end, size should be initialized before calling this * function on AGP platform. * - * Note: We don't explictly enforce VRAM start to be aligned on VRAM size, + * Note: We don't explicitly enforce VRAM start to be aligned on VRAM size, * this shouldn't be a problem as we are using the PCI aperture as a reference. * Otherwise this would be needed for rv280, all r3xx, and all r4xx, but * not IGP. diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 4be58793dc1..bdbab5c43bd 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1492,7 +1492,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, * * \return Flags, or'ed together as follows: * - * DRM_SCANOUTPOS_VALID = Query successfull. + * DRM_SCANOUTPOS_VALID = Query successful. * DRM_SCANOUTPOS_INVBL = Inside vblank. * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of * this flag means that returned position may be offset by a constant but diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 5cba46b9779..a1b59ca96d0 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -271,7 +271,7 @@ typedef struct drm_radeon_private { int have_z_offset; - /* starting from here on, data is preserved accross an open */ + /* starting from here on, data is preserved across an open */ uint32_t flags; /* see radeon_chip_flags */ resource_size_t fb_aper_offset; diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h index 7f8e778dba4..ede6c13628f 100644 --- a/drivers/gpu/drm/radeon/radeon_object.h +++ b/drivers/gpu/drm/radeon/radeon_object.h @@ -87,7 +87,7 @@ static inline void radeon_bo_unreserve(struct radeon_bo *bo) * Returns current GPU offset of the object. * * Note: object should either be pinned or reserved when calling this - * function, it might be usefull to add check for this for debugging. + * function, it might be useful to add check for this for debugging. */ static inline u64 radeon_bo_gpu_offset(struct radeon_bo *bo) { diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 4ae5a3d1074..92e7ea73b7c 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -980,7 +980,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev, } /* hyper z clear */ - /* no docs available, based on reverse engeneering by Stephane Marchesin */ + /* no docs available, based on reverse engineering by Stephane Marchesin */ if ((flags & (RADEON_DEPTH | RADEON_STENCIL)) && (flags & RADEON_CLEAR_FASTZ)) { diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index cceeb42789b..dfe32e62bd9 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -245,7 +245,7 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf, /* TODO handle none page aligned offsets */ /* TODO handle partial uploads and pitch != 256 */ /* TODO handle more then one copy (size != 64) */ - DRM_ERROR("lazy programer, cant handle wierd stuff\n"); + DRM_ERROR("lazy programmer, can't handle weird stuff\n"); return; } |