1 files changed, 920 insertions, 0 deletions

diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
new file mode 100644
index 00000000000..2451c7e5feb
--- /dev/null
+++ b/drivers/hid/hid-rmi.c
@@ -0,0 +1,920 @@
+/*
+ *  Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
+ *  Copyright (c) 2013 Synaptics Incorporated
+ *  Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ *  Copyright (c) 2014 Red Hat, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include "hid-ids.h"
+
+#define RMI_MOUSE_REPORT_ID		0x01 /* Mouse emulation Report */
+#define RMI_WRITE_REPORT_ID		0x09 /* Output Report */
+#define RMI_READ_ADDR_REPORT_ID		0x0a /* Output Report */
+#define RMI_READ_DATA_REPORT_ID		0x0b /* Input Report */
+#define RMI_ATTN_REPORT_ID		0x0c /* Input Report */
+#define RMI_SET_RMI_MODE_REPORT_ID	0x0f /* Feature Report */
+
+/* flags */
+#define RMI_READ_REQUEST_PENDING	BIT(0)
+#define RMI_READ_DATA_PENDING		BIT(1)
+#define RMI_STARTED			BIT(2)
+
+enum rmi_mode_type {
+	RMI_MODE_OFF			= 0,
+	RMI_MODE_ATTN_REPORTS		= 1,
+	RMI_MODE_NO_PACKED_ATTN_REPORTS	= 2,
+};
+
+struct rmi_function {
+	unsigned page;			/* page of the function */
+	u16 query_base_addr;		/* base address for queries */
+	u16 command_base_addr;		/* base address for commands */
+	u16 control_base_addr;		/* base address for controls */
+	u16 data_base_addr;		/* base address for datas */
+	unsigned int interrupt_base;	/* cross-function interrupt number
+					 * (uniq in the device)*/
+	unsigned int interrupt_count;	/* number of interrupts */
+	unsigned int report_size;	/* size of a report */
+	unsigned long irq_mask;		/* mask of the interrupts
+					 * (to be applied against ATTN IRQ) */
+};
+
+/**
+ * struct rmi_data - stores information for hid communication
+ *
+ * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
+ * @page: Keeps track of the current virtual page
+ *
+ * @wait: Used for waiting for read data
+ *
+ * @writeReport: output buffer when writing RMI registers
+ * @readReport: input buffer when reading RMI registers
+ *
+ * @input_report_size: size of an input report (advertised by HID)
+ * @output_report_size: size of an output report (advertised by HID)
+ *
+ * @flags: flags for the current device (started, reading, etc...)
+ *
+ * @f11: placeholder of internal RMI function F11 description
+ * @f30: placeholder of internal RMI function F30 description
+ *
+ * @max_fingers: maximum finger count reported by the device
+ * @max_x: maximum x value reported by the device
+ * @max_y: maximum y value reported by the device
+ *
+ * @gpio_led_count: count of GPIOs + LEDs reported by F30
+ * @button_count: actual physical buttons count
+ * @button_mask: button mask used to decode GPIO ATTN reports
+ * @button_state_mask: pull state of the buttons
+ *
+ * @input: pointer to the kernel input device
+ *
+ * @reset_work: worker which will be called in case of a mouse report
+ * @hdev: pointer to the struct hid_device
+ */
+struct rmi_data {
+	struct mutex page_mutex;
+	int page;
+
+	wait_queue_head_t wait;
+
+	u8 *writeReport;
+	u8 *readReport;
+
+	int input_report_size;
+	int output_report_size;
+
+	unsigned long flags;
+
+	struct rmi_function f11;
+	struct rmi_function f30;
+
+	unsigned int max_fingers;
+	unsigned int max_x;
+	unsigned int max_y;
+	unsigned int x_size_mm;
+	unsigned int y_size_mm;
+
+	unsigned int gpio_led_count;
+	unsigned int button_count;
+	unsigned long button_mask;
+	unsigned long button_state_mask;
+
+	struct input_dev *input;
+
+	struct work_struct reset_work;
+	struct hid_device *hdev;
+};
+
+#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
+
+static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
+
+/**
+ * rmi_set_page - Set RMI page
+ * @hdev: The pointer to the hid_device struct
+ * @page: The new page address.
+ *
+ * RMI devices have 16-bit addressing, but some of the physical
+ * implementations (like SMBus) only have 8-bit addressing. So RMI implements
+ * a page address at 0xff of every page so we can reliable page addresses
+ * every 256 registers.
+ *
+ * The page_mutex lock must be held when this function is entered.
+ *
+ * Returns zero on success, non-zero on failure.
+ */
+static int rmi_set_page(struct hid_device *hdev, u8 page)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int retval;
+
+	data->writeReport[0] = RMI_WRITE_REPORT_ID;
+	data->writeReport[1] = 1;
+	data->writeReport[2] = 0xFF;
+	data->writeReport[4] = page;
+
+	retval = rmi_write_report(hdev, data->writeReport,
+			data->output_report_size);
+	if (retval != data->output_report_size) {
+		dev_err(&hdev->dev,
+			"%s: set page failed: %d.", __func__, retval);
+		return retval;
+	}
+
+	data->page = page;
+	return 0;
+}
+
+static int rmi_set_mode(struct hid_device *hdev, u8 mode)
+{
+	int ret;
+	u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
+
+	ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf,
+			sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret < 0) {
+		dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
+{
+	int ret;
+
+	ret = hid_hw_output_report(hdev, (void *)report, len);
+	if (ret < 0) {
+		dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
+		const int len)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int ret;
+	int bytes_read;
+	int bytes_needed;
+	int retries;
+	int read_input_count;
+
+	mutex_lock(&data->page_mutex);
+
+	if (RMI_PAGE(addr) != data->page) {
+		ret = rmi_set_page(hdev, RMI_PAGE(addr));
+		if (ret < 0)
+			goto exit;
+	}
+
+	for (retries = 5; retries > 0; retries--) {
+		data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
+		data->writeReport[1] = 0; /* old 1 byte read count */
+		data->writeReport[2] = addr & 0xFF;
+		data->writeReport[3] = (addr >> 8) & 0xFF;
+		data->writeReport[4] = len  & 0xFF;
+		data->writeReport[5] = (len >> 8) & 0xFF;
+
+		set_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+
+		ret = rmi_write_report(hdev, data->writeReport,
+						data->output_report_size);
+		if (ret != data->output_report_size) {
+			clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+			dev_err(&hdev->dev,
+				"failed to write request output report (%d)\n",
+				ret);
+			goto exit;
+		}
+
+		bytes_read = 0;
+		bytes_needed = len;
+		while (bytes_read < len) {
+			if (!wait_event_timeout(data->wait,
+				test_bit(RMI_READ_DATA_PENDING, &data->flags),
+					msecs_to_jiffies(1000))) {
+				hid_warn(hdev, "%s: timeout elapsed\n",
+					 __func__);
+				ret = -EAGAIN;
+				break;
+			}
+
+			read_input_count = data->readReport[1];
+			memcpy(buf + bytes_read, &data->readReport[2],
+				read_input_count < bytes_needed ?
+					read_input_count : bytes_needed);
+
+			bytes_read += read_input_count;
+			bytes_needed -= read_input_count;
+			clear_bit(RMI_READ_DATA_PENDING, &data->flags);
+		}
+
+		if (ret >= 0) {
+			ret = 0;
+			break;
+		}
+	}
+
+exit:
+	clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+	mutex_unlock(&data->page_mutex);
+	return ret;
+}
+
+static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
+{
+	return rmi_read_block(hdev, addr, buf, 1);
+}
+
+static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
+		u8 finger_state, u8 *touch_data)
+{
+	int x, y, wx, wy;
+	int wide, major, minor;
+	int z;
+
+	input_mt_slot(hdata->input, slot);
+	input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
+			finger_state == 0x01);
+	if (finger_state == 0x01) {
+		x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
+		y = (touch_data[1] << 4) | (touch_data[2] >> 4);
+		wx = touch_data[3] & 0x0F;
+		wy = touch_data[3] >> 4;
+		wide = (wx > wy);
+		major = max(wx, wy);
+		minor = min(wx, wy);
+		z = touch_data[4];
+
+		/* y is inverted */
+		y = hdata->max_y - y;
+
+		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
+		input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
+		input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
+		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
+		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
+	}
+}
+
+static void rmi_reset_work(struct work_struct *work)
+{
+	struct rmi_data *hdata = container_of(work, struct rmi_data,
+						reset_work);
+
+	/* switch the device to RMI if we receive a generic mouse report */
+	rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
+}
+
+static inline int rmi_schedule_reset(struct hid_device *hdev)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+	return schedule_work(&hdata->reset_work);
+}
+
+static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+		int size)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+	int offset;
+	int i;
+
+	if (size < hdata->f11.report_size)
+		return 0;
+
+	if (!(irq & hdata->f11.irq_mask))
+		return 0;
+
+	offset = (hdata->max_fingers >> 2) + 1;
+	for (i = 0; i < hdata->max_fingers; i++) {
+		int fs_byte_position = i >> 2;
+		int fs_bit_position = (i & 0x3) << 1;
+		int finger_state = (data[fs_byte_position] >> fs_bit_position) &
+					0x03;
+
+		rmi_f11_process_touch(hdata, i, finger_state,
+				&data[offset + 5 * i]);
+	}
+	input_mt_sync_frame(hdata->input);
+	input_sync(hdata->input);
+	return hdata->f11.report_size;
+}
+
+static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+		int size)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+	int i;
+	int button = 0;
+	bool value;
+
+	if (!(irq & hdata->f30.irq_mask))
+		return 0;
+
+	for (i = 0; i < hdata->gpio_led_count; i++) {
+		if (test_bit(i, &hdata->button_mask)) {
+			value = (data[i / 8] >> (i & 0x07)) & BIT(0);
+			if (test_bit(i, &hdata->button_state_mask))
+				value = !value;
+			input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
+					value);
+		}
+	}
+	return hdata->f30.report_size;
+}
+
+static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+	unsigned long irq_mask = 0;
+	unsigned index = 2;
+
+	if (!(test_bit(RMI_STARTED, &hdata->flags)))
+		return 0;
+
+	irq_mask |= hdata->f11.irq_mask;
+	irq_mask |= hdata->f30.irq_mask;
+
+	if (data[1] & ~irq_mask)
+		hid_warn(hdev, "unknown intr source:%02lx %s:%d\n",
+			data[1] & ~irq_mask, __FILE__, __LINE__);
+
+	if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
+		index += rmi_f11_input_event(hdev, data[1], &data[index],
+				size - index);
+		index += rmi_f30_input_event(hdev, data[1], &data[index],
+				size - index);
+	} else {
+		index += rmi_f30_input_event(hdev, data[1], &data[index],
+				size - index);
+		index += rmi_f11_input_event(hdev, data[1], &data[index],
+				size - index);
+	}
+
+	return 1;
+}
+
+static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+
+	if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
+		hid_err(hdev, "no read request pending\n");
+		return 0;
+	}
+
+	memcpy(hdata->readReport, data, size < hdata->input_report_size ?
+			size : hdata->input_report_size);
+	set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
+	wake_up(&hdata->wait);
+
+	return 1;
+}
+
+static int rmi_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	switch (data[0]) {
+	case RMI_READ_DATA_REPORT_ID:
+		return rmi_read_data_event(hdev, data, size);
+	case RMI_ATTN_REPORT_ID:
+		return rmi_input_event(hdev, data, size);
+	case RMI_MOUSE_REPORT_ID:
+		rmi_schedule_reset(hdev);
+		break;
+	}
+
+	return 0;
+}
+
+static int rmi_post_reset(struct hid_device *hdev)
+{
+	return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+}
+
+static int rmi_post_resume(struct hid_device *hdev)
+{
+	return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+}
+
+#define RMI4_MAX_PAGE 0xff
+#define RMI4_PAGE_SIZE 0x0100
+
+#define PDT_START_SCAN_LOCATION 0x00e9
+#define PDT_END_SCAN_LOCATION	0x0005
+#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
+
+struct pdt_entry {
+	u8 query_base_addr:8;
+	u8 command_base_addr:8;
+	u8 control_base_addr:8;
+	u8 data_base_addr:8;
+	u8 interrupt_source_count:3;
+	u8 bits3and4:2;
+	u8 function_version:2;
+	u8 bit7:1;
+	u8 function_number:8;
+} __attribute__((__packed__));
+
+static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
+{
+	return GENMASK(irq_count + irq_base - 1, irq_base);
+}
+
+static void rmi_register_function(struct rmi_data *data,
+	struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
+{
+	struct rmi_function *f = NULL;
+	u16 page_base = page << 8;
+
+	switch (pdt_entry->function_number) {
+	case 0x11:
+		f = &data->f11;
+		break;
+	case 0x30:
+		f = &data->f30;
+		break;
+	}
+
+	if (f) {
+		f->page = page;
+		f->query_base_addr = page_base | pdt_entry->query_base_addr;
+		f->command_base_addr = page_base | pdt_entry->command_base_addr;
+		f->control_base_addr = page_base | pdt_entry->control_base_addr;
+		f->data_base_addr = page_base | pdt_entry->data_base_addr;
+		f->interrupt_base = interrupt_count;
+		f->interrupt_count = pdt_entry->interrupt_source_count;
+		f->irq_mask = rmi_gen_mask(f->interrupt_base,
+						f->interrupt_count);
+	}
+}
+
+static int rmi_scan_pdt(struct hid_device *hdev)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct pdt_entry entry;
+	int page;
+	bool page_has_function;
+	int i;
+	int retval;
+	int interrupt = 0;
+	u16 page_start, pdt_start , pdt_end;
+
+	hid_info(hdev, "Scanning PDT...\n");
+
+	for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
+		page_start = RMI4_PAGE_SIZE * page;
+		pdt_start = page_start + PDT_START_SCAN_LOCATION;
+		pdt_end = page_start + PDT_END_SCAN_LOCATION;
+
+		page_has_function = false;
+		for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
+			retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
+			if (retval) {
+				hid_err(hdev,
+					"Read of PDT entry at %#06x failed.\n",
+					i);
+				goto error_exit;
+			}
+
+			if (RMI4_END_OF_PDT(entry.function_number))
+				break;
+
+			page_has_function = true;
+
+			hid_info(hdev, "Found F%02X on page %#04x\n",
+					entry.function_number, page);
+
+			rmi_register_function(data, &entry, page, interrupt);
+			interrupt += entry.interrupt_source_count;
+		}
+
+		if (!page_has_function)
+			break;
+	}
+
+	hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
+	retval = 0;
+
+error_exit:
+	return retval;
+}
+
+static int rmi_populate_f11(struct hid_device *hdev)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	u8 buf[20];
+	int ret;
+	bool has_query9;
+	bool has_query10;
+	bool has_query11;
+	bool has_query12;
+	bool has_physical_props;
+	unsigned x_size, y_size;
+	u16 query12_offset;
+
+	if (!data->f11.query_base_addr) {
+		hid_err(hdev, "No 2D sensor found, giving up.\n");
+		return -ENODEV;
+	}
+
+	/* query 0 contains some useful information */
+	ret = rmi_read(hdev, data->f11.query_base_addr, buf);
+	if (ret) {
+		hid_err(hdev, "can not get query 0: %d.\n", ret);
+		return ret;
+	}
+	has_query9 = !!(buf[0] & BIT(3));
+	has_query11 = !!(buf[0] & BIT(4));
+	has_query12 = !!(buf[0] & BIT(5));
+
+	/* query 1 to get the max number of fingers */
+	ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
+	if (ret) {
+		hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
+		return ret;
+	}
+	data->max_fingers = (buf[0] & 0x07) + 1;
+	if (data->max_fingers > 5)
+		data->max_fingers = 10;
+
+	data->f11.report_size = data->max_fingers * 5 +
+				DIV_ROUND_UP(data->max_fingers, 4);
+
+	if (!(buf[0] & BIT(4))) {
+		hid_err(hdev, "No absolute events, giving up.\n");
+		return -ENODEV;
+	}
+
+	/* query 8 to find out if query 10 exists */
+	ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf);
+	if (ret) {
+		hid_err(hdev, "can not read gesture information: %d.\n", ret);
+		return ret;
+	}
+	has_query10 = !!(buf[0] & BIT(2));
+
+	/*
+	 * At least 8 queries are guaranteed to be present in F11
+	 * +1 for query12.
+	 */
+	query12_offset = 9;
+
+	if (has_query9)
+		++query12_offset;
+
+	if (has_query10)
+		++query12_offset;
+
+	if (has_query11)
+		++query12_offset;
+
+	/* query 12 to know if the physical properties are reported */
+	if (has_query12) {
+		ret = rmi_read(hdev, data->f11.query_base_addr
+				+ query12_offset, buf);
+		if (ret) {
+			hid_err(hdev, "can not get query 12: %d.\n", ret);
+			return ret;
+		}
+		has_physical_props = !!(buf[0] & BIT(5));
+
+		if (has_physical_props) {
+			ret = rmi_read_block(hdev,
+					data->f11.query_base_addr
+						+ query12_offset + 1, buf, 4);
+			if (ret) {
+				hid_err(hdev, "can not read query 15-18: %d.\n",
+					ret);
+				return ret;
+			}
+
+			x_size = buf[0] | (buf[1] << 8);
+			y_size = buf[2] | (buf[3] << 8);
+
+			data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
+			data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
+
+			hid_info(hdev, "%s: size in mm: %d x %d\n",
+				 __func__, data->x_size_mm, data->y_size_mm);
+		}
+	}
+
+	/*
+	 * retrieve the ctrl registers
+	 * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
+	 * and there is no way to know if the first 20 bytes are here or not.
+	 * We use only the first 10 bytes, so get only them.
+	 */
+	ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 10);
+	if (ret) {
+		hid_err(hdev, "can not read ctrl block of size 10: %d.\n", ret);
+		return ret;
+	}
+
+	data->max_x = buf[6] | (buf[7] << 8);
+	data->max_y = buf[8] | (buf[9] << 8);
+
+	return 0;
+}
+
+static int rmi_populate_f30(struct hid_device *hdev)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	u8 buf[20];
+	int ret;
+	bool has_gpio, has_led;
+	unsigned bytes_per_ctrl;
+	u8 ctrl2_addr;
+	int ctrl2_3_length;
+	int i;
+
+	/* function F30 is for physical buttons */
+	if (!data->f30.query_base_addr) {
+		hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
+		return -ENODEV;
+	}
+
+	ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
+	if (ret) {
+		hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
+		return ret;
+	}
+
+	has_gpio = !!(buf[0] & BIT(3));
+	has_led = !!(buf[0] & BIT(2));
+	data->gpio_led_count = buf[1] & 0x1f;
+
+	/* retrieve ctrl 2 & 3 registers */
+	bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
+	/* Ctrl0 is present only if both has_gpio and has_led are set*/
+	ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
+	/* Ctrl1 is always be present */
+	ctrl2_addr += bytes_per_ctrl;
+	ctrl2_3_length = 2 * bytes_per_ctrl;
+
+	data->f30.report_size = bytes_per_ctrl;
+
+	ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
+				buf, ctrl2_3_length);
+	if (ret) {
+		hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
+			ctrl2_3_length, ret);
+		return ret;
+	}
+
+	for (i = 0; i < data->gpio_led_count; i++) {
+		int byte_position = i >> 3;
+		int bit_position = i & 0x07;
+		u8 dir_byte = buf[byte_position];
+		u8 data_byte = buf[byte_position + bytes_per_ctrl];
+		bool dir = (dir_byte >> bit_position) & BIT(0);
+		bool dat = (data_byte >> bit_position) & BIT(0);
+
+		if (dir == 0) {
+			/* input mode */
+			if (dat) {
+				/* actual buttons have pull up resistor */
+				data->button_count++;
+				set_bit(i, &data->button_mask);
+				set_bit(i, &data->button_state_mask);
+			}
+		}
+
+	}
+
+	return 0;
+}
+
+static int rmi_populate(struct hid_device *hdev)
+{
+	int ret;
+
+	ret = rmi_scan_pdt(hdev);
+	if (ret) {
+		hid_err(hdev, "PDT scan failed with code %d.\n", ret);
+		return ret;
+	}
+
+	ret = rmi_populate_f11(hdev);
+	if (ret) {
+		hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
+		return ret;
+	}
+
+	ret = rmi_populate_f30(hdev);
+	if (ret)
+		hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
+
+	return 0;
+}
+
+static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	struct input_dev *input = hi->input;
+	int ret;
+	int res_x, res_y, i;
+
+	data->input = input;
+
+	hid_dbg(hdev, "Opening low level driver\n");
+	ret = hid_hw_open(hdev);
+	if (ret)
+		return;
+
+	/* Allow incoming hid reports */
+	hid_device_io_start(hdev);
+
+	ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+	if (ret < 0) {
+		dev_err(&hdev->dev, "failed to set rmi mode\n");
+		goto exit;
+	}
+
+	ret = rmi_set_page(hdev, 0);
+	if (ret < 0) {
+		dev_err(&hdev->dev, "failed to set page select to 0.\n");
+		goto exit;
+	}
+
+	ret = rmi_populate(hdev);
+	if (ret)
+		goto exit;
+
+	__set_bit(EV_ABS, input->evbit);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
+
+	if (data->x_size_mm && data->y_size_mm) {
+		res_x = (data->max_x - 1) / data->x_size_mm;
+		res_y = (data->max_y - 1) / data->y_size_mm;
+
+		input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
+		input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
+	}
+
+	input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
+
+	input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
+
+	if (data->button_count) {
+		__set_bit(EV_KEY, input->evbit);
+		for (i = 0; i < data->button_count; i++)
+			__set_bit(BTN_LEFT + i, input->keybit);
+
+		if (data->button_count == 1)
+			__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+	}
+
+	set_bit(RMI_STARTED, &data->flags);
+
+exit:
+	hid_device_io_stop(hdev);
+	hid_hw_close(hdev);
+}
+
+static int rmi_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit, int *max)
+{
+	/* we want to make HID ignore the advertised HID collection */
+	return -1;
+}
+
+static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct rmi_data *data = NULL;
+	int ret;
+	size_t alloc_size;
+
+	data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	INIT_WORK(&data->reset_work, rmi_reset_work);
+	data->hdev = hdev;
+
+	hid_set_drvdata(hdev, data);
+
+	hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	data->input_report_size = (hdev->report_enum[HID_INPUT_REPORT]
+		.report_id_hash[RMI_ATTN_REPORT_ID]->size >> 3)
+		+ 1 /* report id */;
+	data->output_report_size = (hdev->report_enum[HID_OUTPUT_REPORT]
+		.report_id_hash[RMI_WRITE_REPORT_ID]->size >> 3)
+		+ 1 /* report id */;
+
+	alloc_size = data->output_report_size + data->input_report_size;
+
+	data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
+	if (!data->writeReport) {
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	data->readReport = data->writeReport + data->output_report_size;
+
+	init_waitqueue_head(&data->wait);
+
+	mutex_init(&data->page_mutex);
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	if (!test_bit(RMI_STARTED, &data->flags)) {
+		hid_hw_stop(hdev);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void rmi_remove(struct hid_device *hdev)
+{
+	struct rmi_data *hdata = hid_get_drvdata(hdev);
+
+	clear_bit(RMI_STARTED, &hdata->flags);
+
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id rmi_id[] = {
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, rmi_id);
+
+static struct hid_driver rmi_driver = {
+	.name = "hid-rmi",
+	.id_table		= rmi_id,
+	.probe			= rmi_probe,
+	.remove			= rmi_remove,
+	.raw_event		= rmi_raw_event,
+	.input_mapping		= rmi_input_mapping,
+	.input_configured	= rmi_input_configured,
+#ifdef CONFIG_PM
+	.resume			= rmi_post_resume,
+	.reset_resume		= rmi_post_reset,
+#endif
+};
+
+module_hid_driver(rmi_driver);
+
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
+MODULE_DESCRIPTION("RMI HID driver");
+MODULE_LICENSE("GPL");