diff options
Diffstat (limited to 'drivers/hid/hid-wacom.c')
-rw-r--r-- | drivers/hid/hid-wacom.c | 302 |
1 files changed, 216 insertions, 86 deletions
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 067e2963314..fe23a1eb586 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -24,15 +24,16 @@ #include <linux/device.h> #include <linux/hid.h> #include <linux/module.h> +#include <linux/leds.h> #include <linux/slab.h> -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY #include <linux/power_supply.h> -#endif #include "hid-ids.h" #define PAD_DEVICE_ID 0x0F +#define WAC_CMD_LED_CONTROL 0x20 + struct wacom_data { __u16 tool; __u16 butstate; @@ -41,16 +42,20 @@ struct wacom_data { __u32 id; __u32 serial; unsigned char high_speed; -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY - int battery_capacity; + __u8 battery_capacity; + __u8 power_raw; + __u8 ps_connected; struct power_supply battery; struct power_supply ac; -#endif + __u8 led_selector; + struct led_classdev *leds[4]; }; -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY -/*percent of battery capacity, 0 means AC online*/ -static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 }; +/*percent of battery capacity for Graphire + 8th value means AC online and show 100% capacity */ +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; +/*percent of battery capacity for Intuos4 WL, AC has a separate bit*/ +static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 }; static enum power_supply_property wacom_battery_props[] = { POWER_SUPPLY_PROP_PRESENT, @@ -64,13 +69,123 @@ static enum power_supply_property wacom_ac_props[] = { POWER_SUPPLY_PROP_SCOPE, }; +static void wacom_leds_set_brightness(struct led_classdev *led_dev, + enum led_brightness value) +{ + struct device *dev = led_dev->dev->parent; + struct hid_device *hdev; + struct wacom_data *wdata; + unsigned char *buf; + __u8 led = 0; + int i; + + hdev = container_of(dev, struct hid_device, dev); + wdata = hid_get_drvdata(hdev); + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) + wdata->led_selector = i; + } + + led = wdata->led_selector | 0x04; + buf = kzalloc(9, GFP_KERNEL); + if (buf) { + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = led; + buf[2] = value; + hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT); + kfree(buf); + } + + return; +} + +static enum led_brightness wacom_leds_get_brightness(struct led_classdev *led_dev) +{ + struct wacom_data *wdata; + struct device *dev = led_dev->dev->parent; + int value = 0; + int i; + + wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) { + value = wdata->leds[i]->brightness; + break; + } + } + + return value; +} + + +static int wacom_initialize_leds(struct hid_device *hdev) +{ + struct wacom_data *wdata = hid_get_drvdata(hdev); + struct led_classdev *led; + struct device *dev = &hdev->dev; + size_t namesz = strlen(dev_name(dev)) + 12; + char *name; + int i, ret; + + wdata->led_selector = 0; + + for (i = 0; i < 4; i++) { + led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL); + if (!led) { + hid_warn(hdev, + "can't allocate memory for LED selector\n"); + ret = -ENOMEM; + goto err; + } + + name = (void *)&led[1]; + snprintf(name, namesz, "%s:selector:%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 127; + led->brightness_get = wacom_leds_get_brightness; + led->brightness_set = wacom_leds_set_brightness; + + wdata->leds[i] = led; + + ret = led_classdev_register(dev, wdata->leds[i]); + + if (ret) { + wdata->leds[i] = NULL; + kfree(led); + hid_warn(hdev, "can't register LED\n"); + goto err; + } + } + +err: + return ret; +} + +static void wacom_destroy_leds(struct hid_device *hdev) +{ + struct wacom_data *wdata = hid_get_drvdata(hdev); + struct led_classdev *led; + int i; + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i]) { + led = wdata->leds[i]; + wdata->leds[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + } + +} + static int wacom_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct wacom_data *wdata = container_of(psy, struct wacom_data, battery); - int power_state = batcap[wdata->battery_capacity]; int ret = 0; switch (psp) { @@ -81,11 +196,7 @@ static int wacom_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_SCOPE_DEVICE; break; case POWER_SUPPLY_PROP_CAPACITY: - /* show 100% battery capacity when charging */ - if (power_state == 0) - val->intval = 100; - else - val->intval = power_state; + val->intval = wdata->battery_capacity; break; default: ret = -EINVAL; @@ -99,17 +210,13 @@ static int wacom_ac_get_property(struct power_supply *psy, union power_supply_propval *val) { struct wacom_data *wdata = container_of(psy, struct wacom_data, ac); - int power_state = batcap[wdata->battery_capacity]; int ret = 0; switch (psp) { case POWER_SUPPLY_PROP_PRESENT: /* fall through */ case POWER_SUPPLY_PROP_ONLINE: - if (power_state == 0) - val->intval = 1; - else - val->intval = 0; + val->intval = wdata->ps_connected; break; case POWER_SUPPLY_PROP_SCOPE: val->intval = POWER_SUPPLY_SCOPE_DEVICE; @@ -120,41 +227,16 @@ static int wacom_ac_get_property(struct power_supply *psy, } return ret; } -#endif - -static void wacom_set_features(struct hid_device *hdev) -{ - int ret; - __u8 rep_data[2]; - - /*set high speed, tablet mode*/ - rep_data[0] = 0x03; - rep_data[1] = 0x20; - ret = hdev->hid_output_raw_report(hdev, rep_data, 2, - HID_FEATURE_REPORT); - return; -} -static void wacom_poke(struct hid_device *hdev, u8 speed) +static void wacom_set_features(struct hid_device *hdev, u8 speed) { struct wacom_data *wdata = hid_get_drvdata(hdev); int limit, ret; - char rep_data[2]; - - rep_data[0] = 0x03 ; rep_data[1] = 0x00; - limit = 3; - do { - ret = hdev->hid_output_raw_report(hdev, rep_data, 2, - HID_FEATURE_REPORT); - } while (ret < 0 && limit-- > 0); - - if (ret >= 0) { - if (speed == 0) - rep_data[0] = 0x05; - else - rep_data[0] = 0x06; + __u8 rep_data[2]; - rep_data[1] = 0x00; + switch (hdev->product) { + case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: + rep_data[0] = 0x03 ; rep_data[1] = 0x00; limit = 3; do { ret = hdev->hid_output_raw_report(hdev, rep_data, 2, @@ -162,17 +244,47 @@ static void wacom_poke(struct hid_device *hdev, u8 speed) } while (ret < 0 && limit-- > 0); if (ret >= 0) { - wdata->high_speed = speed; - return; + if (speed == 0) + rep_data[0] = 0x05; + else + rep_data[0] = 0x06; + + rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, + rep_data, 2, HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + + if (ret >= 0) { + wdata->high_speed = speed; + return; + } } + + /* + * Note that if the raw queries fail, it's not a hard failure + * and it is safe to continue + */ + hid_warn(hdev, "failed to poke device, command %d, err %d\n", + rep_data[0], ret); + break; + case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: + if (speed == 1) + wdata->features &= ~0x20; + else + wdata->features |= 0x20; + + rep_data[0] = 0x03; + rep_data[1] = wdata->features; + + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + if (ret >= 0) + wdata->high_speed = speed; + break; } - /* - * Note that if the raw queries fail, it's not a hard failure and it - * is safe to continue - */ - hid_warn(hdev, "failed to poke device, command %d, err %d\n", - rep_data[0], ret); return; } @@ -196,7 +308,7 @@ static ssize_t wacom_store_speed(struct device *dev, return -EINVAL; if (new_speed == 0 || new_speed == 1) { - wacom_poke(hdev, new_speed); + wacom_set_features(hdev, new_speed); return strnlen(buf, PAGE_SIZE); } else return -EINVAL; @@ -310,12 +422,16 @@ static int wacom_gr_parse_report(struct hid_device *hdev, input_sync(input); } -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY - /* Store current battery capacity */ + /* Store current battery capacity and power supply state*/ rw = (data[7] >> 2 & 0x07); - if (rw != wdata->battery_capacity) - wdata->battery_capacity = rw; -#endif + if (rw != wdata->power_raw) { + wdata->power_raw = rw; + wdata->battery_capacity = batcap_gr[rw]; + if (rw == 7) + wdata->ps_connected = 1; + else + wdata->ps_connected = 0; + } return 1; } @@ -369,6 +485,7 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata, { __u16 x, y, pressure; __u8 distance; + __u8 tilt_x, tilt_y; switch (data[1]) { case 0x80: /* Out of proximity report */ @@ -405,6 +522,8 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata, pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5) | (data[1] & 0x01); distance = (data[9] >> 2) & 0x3f; + tilt_x = ((data[7] << 1) & 0x7e) | (data[8] >> 7); + tilt_y = data[8] & 0x7f; input_report_key(input, BTN_TOUCH, pressure > 1); @@ -415,6 +534,8 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata, input_report_abs(input, ABS_Y, y); input_report_abs(input, ABS_PRESSURE, pressure); input_report_abs(input, ABS_DISTANCE, distance); + input_report_abs(input, ABS_TILT_X, tilt_x); + input_report_abs(input, ABS_TILT_Y, tilt_y); input_report_abs(input, ABS_MISC, wdata->id); input_event(input, EV_MSC, MSC_SERIAL, wdata->serial); input_report_key(input, wdata->tool, 1); @@ -455,6 +576,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, struct input_dev *input; unsigned char *data = (unsigned char *) raw_data; int i; + __u8 power_raw; if (!(hdev->claimed & HID_CLAIMED_INPUT)) return 0; @@ -462,13 +584,15 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; - /* Check if this is a tablet report */ - if (data[0] != 0x03) - return 0; - switch (hdev->product) { case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: - return wacom_gr_parse_report(hdev, wdata, input, data); + if (data[0] == 0x03) { + return wacom_gr_parse_report(hdev, wdata, input, data); + } else { + hid_err(hdev, "Unknown report: %d,%d size:%d\n", + data[0], data[1], size); + return 0; + } break; case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: i = 1; @@ -482,6 +606,13 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, wacom_i4_parse_report(hdev, wdata, input, data + i); i += 10; wacom_i4_parse_report(hdev, wdata, input, data + i); + power_raw = data[i+10]; + if (power_raw != wdata->power_raw) { + wdata->power_raw = power_raw; + wdata->battery_capacity = batcap_i4[power_raw & 0x07]; + wdata->ps_connected = power_raw & 0x08; + } + break; default: hid_err(hdev, "Unknown report: %d,%d size:%d\n", @@ -546,6 +677,8 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi, input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0); input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0); input_set_abs_params(input, ABS_DISTANCE, 0, 63, 0, 0); + input_set_abs_params(input, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input, ABS_TILT_Y, 0, 127, 0, 0); break; } @@ -584,19 +717,19 @@ static int wacom_probe(struct hid_device *hdev, hid_warn(hdev, "can't create sysfs speed attribute err: %d\n", ret); - switch (hdev->product) { - case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: - /* Set Wacom mode 2 with high reporting speed */ - wacom_poke(hdev, 1); - break; - case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: + wdata->features = 0; + wacom_set_features(hdev, 1); + + if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) { sprintf(hdev->name, "%s", "Wacom Intuos4 WL"); - wdata->features = 0; - wacom_set_features(hdev); - break; + ret = wacom_initialize_leds(hdev); + if (ret) { + hid_warn(hdev, + "can't create led attribute, err: %d\n", ret); + goto destroy_leds; + } } -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY wdata->battery.properties = wacom_battery_props; wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props); wdata->battery.get_property = wacom_battery_get_property; @@ -629,16 +762,15 @@ static int wacom_probe(struct hid_device *hdev, } power_supply_powers(&wdata->ac, &hdev->dev); -#endif return 0; -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY err_ac: power_supply_unregister(&wdata->battery); err_battery: device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); -#endif +destroy_leds: + wacom_destroy_leds(hdev); err_free: kfree(wdata); return ret; @@ -646,16 +778,14 @@ err_free: static void wacom_remove(struct hid_device *hdev) { -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY struct wacom_data *wdata = hid_get_drvdata(hdev); -#endif + + wacom_destroy_leds(hdev); device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); -#ifdef CONFIG_HID_WACOM_POWER_SUPPLY power_supply_unregister(&wdata->battery); power_supply_unregister(&wdata->ac); -#endif kfree(hid_get_drvdata(hdev)); } @@ -693,5 +823,5 @@ static void __exit wacom_exit(void) module_init(wacom_init); module_exit(wacom_exit); +MODULE_DESCRIPTION("Driver for Wacom Graphire Bluetooth and Wacom Intuos4 WL"); MODULE_LICENSE("GPL"); - |