diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 146 |
1 files changed, 84 insertions, 62 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 25b72a49170..3ba3a5221c4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2,9 +2,7 @@ # Hardware monitoring chip drivers configuration # -menu "Hardware Monitoring support" - -config HWMON +menuconfig HWMON tristate "Hardware Monitoring support" default y help @@ -23,13 +21,15 @@ config HWMON This support can also be built as a module. If so, the module will be called hwmon. +if HWMON + config HWMON_VID tristate default n config SENSORS_ABITUGURU tristate "Abit uGuru" - depends on HWMON && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for the Abit uGuru chips sensor part. The voltage and frequency control parts of the Abit @@ -39,9 +39,19 @@ config SENSORS_ABITUGURU This driver can also be built as a module. If so, the module will be called abituguru. +config SENSORS_AD7418 + tristate "Analog Devices AD7416, AD7417 and AD7418" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7416, AD7417 and AD7418 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called ad7418. + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, @@ -53,7 +63,7 @@ config SENSORS_ADM1021 config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" - depends on HWMON && I2C + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 @@ -64,7 +74,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 @@ -75,7 +85,7 @@ config SENSORS_ADM1026 config SENSORS_ADM1029 tristate "Analog Devices ADM1029" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1029 sensor chip. @@ -86,7 +96,7 @@ config SENSORS_ADM1029 config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -96,7 +106,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -107,7 +117,7 @@ config SENSORS_ADM9240 config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" - depends on HWMON && X86 && PCI && EXPERIMENTAL + depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported is whole AMD K8 @@ -119,7 +129,7 @@ config SENSORS_K8TEMP config SENSORS_AMS tristate "Apple Motion Sensor driver" - depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL + depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL help Support for the motion sensor included in PowerBooks. Includes implementations for PMU and I2C. @@ -144,7 +154,7 @@ config SENSORS_AMS_I2C config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -155,7 +165,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID @@ -169,7 +179,7 @@ config SENSORS_ATXP1 config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. @@ -179,7 +189,7 @@ config SENSORS_DS1621 config SENSORS_F71805F tristate "Fintek F71805F/FG and F71872F/FG" - depends on HWMON && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71805F/FG and F71872F/FG Super-I/O @@ -190,7 +200,7 @@ config SENSORS_F71805F config SENSORS_FSCHER tristate "FSC Hermes" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -200,7 +210,7 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -210,7 +220,7 @@ config SENSORS_FSCPOS config SENSORS_GL518SM tristate "Genesys Logic GL518SM" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Genesys Logic GL518SM sensor chips. @@ -220,7 +230,7 @@ config SENSORS_GL518SM config SENSORS_GL520SM tristate "Genesys Logic GL520SM" - depends on HWMON && I2C + depends on I2C select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM @@ -229,9 +239,17 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_CORETEMP + tristate "Intel Core (2) Duo/Solo temperature sensor" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported all are all known variants + of Intel Core family. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" - depends on HWMON && I2C + depends on I2C select I2C_ISA select HWMON_VID help @@ -243,7 +261,7 @@ config SENSORS_IT87 config SENSORS_LM63 tristate "National Semiconductor LM63" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan @@ -255,7 +273,7 @@ config SENSORS_LM63 config SENSORS_LM70 tristate "National Semiconductor LM70" - depends on HWMON && SPI_MASTER && EXPERIMENTAL + depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor LM70 digital temperature sensor chip. @@ -265,7 +283,7 @@ config SENSORS_LM70 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in @@ -280,7 +298,7 @@ config SENSORS_LM75 config SENSORS_LM77 tristate "National Semiconductor LM77" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM77 sensor chips. @@ -290,8 +308,7 @@ config SENSORS_LM77 config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" - depends on HWMON && I2C - select I2C_ISA + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM78, @@ -302,7 +319,7 @@ config SENSORS_LM78 config SENSORS_LM80 tristate "National Semiconductor LM80" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM80 sensor chips. @@ -312,7 +329,7 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. @@ -322,7 +339,7 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 @@ -333,7 +350,7 @@ config SENSORS_LM85 config SENSORS_LM87 tristate "National Semiconductor LM87" - depends on HWMON && I2C + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 @@ -344,7 +361,7 @@ config SENSORS_LM87 config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and @@ -358,7 +375,7 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. @@ -368,16 +385,26 @@ config SENSORS_LM92 config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for MAX1619 sensor chip. This driver can also be built as a module. If so, the module will be called max1619. +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select I2C_ISA select HWMON_VID help @@ -392,7 +419,7 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" - depends on HWMON && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC87427 Super-I/O chip. @@ -405,7 +432,7 @@ config SENSORS_PC87427 config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on HWMON && I2C && PCI && EXPERIMENTAL + depends on I2C && PCI && EXPERIMENTAL select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -416,28 +443,28 @@ config SENSORS_SIS5595 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" - depends on HWMON && I2C - select I2C_ISA help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, - LPC47M192 and LPC47M997 chips. + LPC47M192, LPC47M292 and LPC47M997 chips. - The temperature and voltage sensor features of the LPC47M192 - and LPC47M997 are supported by another driver, select also - "SMSC LPC47M192 and compatibles" below for those. + The temperature and voltage sensor features of the LPC47M15x, + LPC47M192, LPC47M292 and LPC47M997 are supported by another + driver, select also "SMSC LPC47M192 and compatibles" below for + those. This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47M192 tristate "SMSC LPC47M192 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the temperature and - voltage sensors of the SMSC LPC47M192 and LPC47M997 chips. + voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 + and LPC47M997 chips. The fan monitoring and control capabilities of these chips are supported by another driver, select @@ -449,8 +476,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA + depends on EXPERIMENTAL help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. @@ -460,7 +486,7 @@ config SENSORS_SMSC47B397 config SENSORS_VIA686A tristate "VIA686A" - depends on HWMON && I2C && PCI + depends on I2C && PCI select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -471,7 +497,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" - depends on HWMON && EXPERIMENTAL + depends on EXPERIMENTAL select HWMON_VID help If you say yes here then you get support for hardware monitoring @@ -482,7 +508,7 @@ config SENSORS_VT1211 config SENSORS_VT8231 tristate "VIA VT8231" - depends on HWMON && I2C && PCI && EXPERIMENTAL + depends on I2C && PCI && EXPERIMENTAL select HWMON_VID select I2C_ISA help @@ -494,8 +520,7 @@ config SENSORS_VT8231 config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on HWMON && I2C - select I2C_ISA + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series @@ -507,7 +532,7 @@ config SENSORS_W83781D config SENSORS_W83791D tristate "Winbond W83791D" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. @@ -517,7 +542,7 @@ config SENSORS_W83791D config SENSORS_W83792D tristate "Winbond W83792D" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83792D chip. @@ -526,7 +551,7 @@ config SENSORS_W83792D config SENSORS_W83793 tristate "Winbond W83793" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Winbond W83793 @@ -537,7 +562,7 @@ config SENSORS_W83793 config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -548,8 +573,6 @@ config SENSORS_W83L785TS config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" - depends on HWMON && I2C - select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series @@ -561,7 +584,7 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select I2C_ISA help If you say yes here you get preliminary support for the hardware @@ -577,7 +600,7 @@ config SENSORS_W83627EHF config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" - depends on HWMON && INPUT && X86 + depends on INPUT && X86 default n help This driver provides support for the IBM Hard Drive Active Protection @@ -620,7 +643,6 @@ config SENSORS_APPLESMC config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" - depends on HWMON default n help Say Y here if you want the I2C chip drivers to produce a bunch of @@ -628,4 +650,4 @@ config HWMON_DEBUG_CHIP a problem with I2C support and want to see more of what is going on. -endmenu +endif # HWMON |