diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 177 |
1 files changed, 110 insertions, 67 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 297bc9a7d6e..e4bd13b3cd8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -467,6 +467,17 @@ config SENSORS_JC42 This driver can also be built as a module. If so, the module will be called jc42. +config SENSORS_LINEAGE + tristate "Lineage Compact Power Line Power Entry Module" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Lineage Compact Power Line + series of DC/DC and AC/DC converters such as CP1800, CP2000AC, + CP2000DC, CP2725, and others. + + This driver can also be built as a module. If so, the module + will be called lineage-pem. + config SENSORS_LM63 tristate "National Semiconductor LM63 and LM64" depends on I2C @@ -510,7 +521,7 @@ config SENSORS_LM75 - Dallas Semiconductor DS75 and DS1775 - Maxim MAX6625 and MAX6626 - Microchip MCP980x - - National Semiconductor LM75 + - National Semiconductor LM75, LM75A - NXP's LM75A - ST Microelectronics STDS75 - TelCom (now Microchip) TCN75 @@ -625,6 +636,17 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + config SENSORS_LTC4215 tristate "Linear Technology LTC4215" depends on I2C && EXPERIMENTAL @@ -685,6 +707,16 @@ config SENSORS_MAX1619 This driver can also be built as a module. If so, the module will be called max1619. +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C && EXPERIMENTAL @@ -735,6 +767,61 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +config PMBUS + tristate "PMBus support" + depends on I2C && EXPERIMENTAL + default n + help + Say yes here if you want to enable PMBus support. + + This driver can also be built as a module. If so, the module will + be called pmbus_core. + +if PMBUS + +config SENSORS_PMBUS + tristate "Generic PMBus devices" + default n + help + If you say yes here you get hardware monitoring support for generic + PMBus devices, including but not limited to BMR450, BMR451, BMR453, + BMR454, and LTC2978. + + This driver can also be built as a module. If so, the module will + be called pmbus. + +config SENSORS_MAX16064 + tristate "Maxim MAX16064" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX16064. + + This driver can also be built as a module. If so, the module will + be called max16064. + +config SENSORS_MAX34440 + tristate "Maxim MAX34440/MAX34441" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX34440 and MAX34441. + + This driver can also be built as a module. If so, the module will + be called max34440. + +config SENSORS_MAX8688 + tristate "Maxim MAX8688" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX8688. + + This driver can also be built as a module. If so, the module will + be called max8688. + +endif # PMBUS + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GENERIC_GPIO @@ -872,6 +959,25 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_SCH5627 + tristate "SMSC SCH5627" + help + If you say yes here you get support for the hardware monitoring + features of the SMSC SCH5627 Super-I/O chip. + + This driver can also be built as a module. If so, the module + will be called sch5627. + +config SENSORS_ADS1015 + tristate "Texas Instruments ADS1015" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADS1015 + 12-bit 4-input ADC device. + + This driver can also be built as a module. If so, the module + will be called ads1015. + config SENSORS_ADS7828 tristate "Texas Instruments ADS7828" depends on I2C @@ -1083,7 +1189,7 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/EHG/DHG, W83667HG" + tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F" select HWMON_VID help If you say yes here you get support for the hardware @@ -1094,7 +1200,8 @@ config SENSORS_W83627EHF chip suited for specific Intel processors that use PECI such as the Core 2 Duo. - This driver also supports the W83667HG chip. + This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F + (also known as W83667HG-I), and NCT6776F. This driver can also be built as a module. If so, the module will be called w83627ehf. @@ -1127,40 +1234,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_LIS3_SPI - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" - depends on !ACPI && SPI_MASTER && INPUT - select INPUT_POLLDEV - default n - help - This driver provides support for the LIS3LV02Dx accelerometer connected - via SPI. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for the SPI transport - is called lis3lv02d_spi. - -config SENSORS_LIS3_I2C - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" - depends on I2C && INPUT - select INPUT_POLLDEV - default n - help - This driver provides support for the LIS3LV02Dx accelerometer connected - via I2C. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the device to act as a pinball machine-esque joystick. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for the I2C transport - is called lis3lv02d_i2c. - config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 @@ -1208,36 +1281,6 @@ config SENSORS_ATK0110 This driver can also be built as a module. If so, the module will be called asus_atk0110. -config SENSORS_LIS3LV02D - tristate "STMicroeletronics LIS3* three-axis digital accelerometer" - depends on INPUT - select INPUT_POLLDEV - select NEW_LEDS - select LEDS_CLASS - default n - help - This driver provides support for the LIS3* accelerometers, such as the - LIS3LV02DL or the LIS331DL. In particular, it can be found in a number - of HP laptops, which have the "Mobile Data Protection System 3D" or - "3D DriveGuard" feature. On such systems the driver should load - automatically (via ACPI alias). The accelerometer might also be found - in other systems, connected via SPI or I2C. The accelerometer data is - readable via /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - a laptop to act as a pinball machine-esque joystick. It provides also - a misc device which can be used to detect free-fall. On HP laptops, - if the led infrastructure is activated, support for a led indicating - disk protection will be provided as hp::hddprotect. For more - information on the feature, refer to Documentation/hwmon/lis3lv02d. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for HP laptops will be - called hp_accel. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of lis3lv02d. - endif # ACPI endif # HWMON |