summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/adt7475.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/adt7475.c')
-rw-r--r--drivers/hwmon/adt7475.c105
1 files changed, 60 insertions, 45 deletions
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 7dab3547fee..df29d13a534 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -32,9 +32,10 @@
#define THERM 5
#define HYSTERSIS 6
-/* These are unique identifiers for the sysfs functions - unlike the
- numbers above, these are not also indexes into an array
-*/
+/*
+ * These are unique identifiers for the sysfs functions - unlike the
+ * numbers above, these are not also indexes into an array
+ */
#define ALARM 9
#define FAULT 10
@@ -288,8 +289,10 @@ static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
i2c_smbus_write_byte_data(client, reg, val & 0xFF);
}
-/* Find the nearest value in a table - used for pwm frequency and
- auto temp range */
+/*
+ * Find the nearest value in a table - used for pwm frequency and
+ * auto temp range
+ */
static int find_nearest(long val, const int *array, int size)
{
int i;
@@ -385,16 +388,20 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
out = (out >> 4) & 0xF;
else
out = (out & 0xF);
- /* Show the value as an absolute number tied to
- * THERM */
+ /*
+ * Show the value as an absolute number tied to
+ * THERM
+ */
out = reg2temp(data, data->temp[THERM][sattr->index]) -
out * 1000;
mutex_unlock(&data->lock);
break;
case OFFSET:
- /* Offset is always 2's complement, regardless of the
- * setting in CONFIG5 */
+ /*
+ * Offset is always 2's complement, regardless of the
+ * setting in CONFIG5
+ */
mutex_lock(&data->lock);
out = (s8)data->temp[sattr->nr][sattr->index];
if (data->config5 & CONFIG5_TEMPOFFSET)
@@ -452,8 +459,10 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
break;
case HYSTERSIS:
- /* The value will be given as an absolute value, turn it
- into an offset based on THERM */
+ /*
+ * The value will be given as an absolute value, turn it
+ * into an offset based on THERM
+ */
/* Read fresh THERM and HYSTERSIS values from the chip */
data->temp[THERM][sattr->index] =
@@ -478,8 +487,10 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
default:
data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
- /* We maintain an extra 2 digits of precision for simplicity
- * - shift those back off before writing the value */
+ /*
+ * We maintain an extra 2 digits of precision for simplicity
+ * - shift those back off before writing the value
+ */
out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
}
@@ -514,8 +525,10 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
return count;
}
-/* Table of autorange values - the user will write the value in millidegrees,
- and we'll convert it */
+/*
+ * Table of autorange values - the user will write the value in millidegrees,
+ * and we'll convert it
+ */
static const int autorange_table[] = {
2000, 2500, 3330, 4000, 5000, 6670, 8000,
10000, 13330, 16000, 20000, 26670, 32000, 40000,
@@ -558,8 +571,10 @@ static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
data->range[sattr->index] =
adt7475_read(TEMP_TRANGE_REG(sattr->index));
- /* The user will write an absolute value, so subtract the start point
- to figure the range */
+ /*
+ * The user will write an absolute value, so subtract the start point
+ * to figure the range
+ */
temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
val = SENSORS_LIMIT(val, temp + autorange_table[0],
temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
@@ -664,8 +679,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
data->pwm[CONTROL][sattr->index] =
adt7475_read(PWM_CONFIG_REG(sattr->index));
- /* If we are not in manual mode, then we shouldn't allow
- * the user to set the pwm speed */
+ /*
+ * If we are not in manual mode, then we shouldn't allow
+ * the user to set the pwm speed
+ */
if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
mutex_unlock(&data->lock);
return count;
@@ -1232,7 +1249,7 @@ static void adt7475_remove_files(struct i2c_client *client,
static int adt7475_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- static const char *names[] = {
+ static const char * const names[] = {
[adt7473] = "ADT7473",
[adt7475] = "ADT7475",
[adt7476] = "ADT7476",
@@ -1280,9 +1297,11 @@ static int adt7475_probe(struct i2c_client *client,
if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
data->has_fan4 = 1;
- /* THERM configuration is more complex on the ADT7476 and ADT7490,
- because 2 different pins (TACH4 and +2.5 Vin) can be used for
- this function */
+ /*
+ * THERM configuration is more complex on the ADT7476 and ADT7490,
+ * because 2 different pins (TACH4 and +2.5 Vin) can be used for
+ * this function
+ */
if (id->driver_data == adt7490) {
if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
!(config3 & CONFIG3_THERM))
@@ -1294,8 +1313,10 @@ static int adt7475_probe(struct i2c_client *client,
data->has_voltage |= (1 << 0); /* in0 */
}
- /* On the ADT7476, the +12V input pin may instead be used as VID5,
- and VID pins may alternatively be used as GPIO */
+ /*
+ * On the ADT7476, the +12V input pin may instead be used as VID5,
+ * and VID pins may alternatively be used as GPIO
+ */
if (id->driver_data == adt7476) {
u8 vid = adt7475_read(REG_VID);
if (!(vid & VID_VIDSEL))
@@ -1314,8 +1335,10 @@ static int adt7475_probe(struct i2c_client *client,
}
data->bypass_attn &= data->has_voltage;
- /* Call adt7475_read_pwm for all pwm's as this will reprogram any
- pwm's which are disabled to manual mode with 0% duty cycle */
+ /*
+ * Call adt7475_read_pwm for all pwm's as this will reprogram any
+ * pwm's which are disabled to manual mode with 0% duty cycle
+ */
for (i = 0; i < ADT7475_PWM_COUNT; i++)
adt7475_read_pwm(client, i);
@@ -1431,8 +1454,10 @@ static void adt7475_read_pwm(struct i2c_client *client, int index)
data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
- /* Figure out the internal value for pwmctrl and pwmchan
- based on the current settings */
+ /*
+ * Figure out the internal value for pwmctrl and pwmchan
+ * based on the current settings
+ */
v = (data->pwm[CONTROL][index] >> 5) & 7;
if (v == 3)
@@ -1440,10 +1465,11 @@ static void adt7475_read_pwm(struct i2c_client *client, int index)
else if (v == 7)
data->pwmctl[index] = 1;
else if (v == 4) {
- /* The fan is disabled - we don't want to
- support that, so change to manual mode and
- set the duty cycle to 0 instead
- */
+ /*
+ * The fan is disabled - we don't want to
+ * support that, so change to manual mode and
+ * set the duty cycle to 0 instead
+ */
data->pwm[INPUT][index] = 0;
data->pwm[CONTROL][index] &= ~0xE0;
data->pwm[CONTROL][index] |= (7 << 5);
@@ -1600,19 +1626,8 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
return data;
}
-static int __init sensors_adt7475_init(void)
-{
- return i2c_add_driver(&adt7475_driver);
-}
-
-static void __exit sensors_adt7475_exit(void)
-{
- i2c_del_driver(&adt7475_driver);
-}
+module_i2c_driver(adt7475_driver);
MODULE_AUTHOR("Advanced Micro Devices, Inc");
MODULE_DESCRIPTION("adt7475 driver");
MODULE_LICENSE("GPL");
-
-module_init(sensors_adt7475_init);
-module_exit(sensors_adt7475_exit);