summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/ds1621.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/ds1621.c')
-rw-r--r--drivers/hwmon/ds1621.c161
1 files changed, 78 insertions, 83 deletions
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index d5ac422d73b..1212d6b7f31 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -27,6 +27,7 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
@@ -52,9 +53,11 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
#define DS1621_REG_CONFIG_DONE 0x80
/* The DS1621 registers */
-#define DS1621_REG_TEMP 0xAA /* word, RO */
-#define DS1621_REG_TEMP_MIN 0xA2 /* word, RW */
-#define DS1621_REG_TEMP_MAX 0xA1 /* word, RW */
+static const u8 DS1621_REG_TEMP[3] = {
+ 0xAA, /* input, word, RO */
+ 0xA2, /* min, word, RW */
+ 0xA1, /* max, word, RW */
+};
#define DS1621_REG_CONF 0xAC /* byte, RW */
#define DS1621_COM_START 0xEE /* no data */
#define DS1621_COM_STOP 0x22 /* no data */
@@ -63,10 +66,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
#define DS1621_ALARM_TEMP_HIGH 0x40
#define DS1621_ALARM_TEMP_LOW 0x20
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+/* Conversions */
#define ALARMS_FROM_REG(val) ((val) & \
(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
@@ -78,7 +78,7 @@ struct ds1621_data {
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp, temp_min, temp_max; /* Register values, word */
+ u16 temp[3]; /* Register values, word */
u8 conf; /* Register encoding, combined */
};
@@ -101,7 +101,7 @@ static struct i2c_driver ds1621_driver = {
/* All registers are word-sized, except for the configuration register.
DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int ds1621_read_value(struct i2c_client *client, u8 reg)
{
if (reg == DS1621_REG_CONF)
@@ -110,9 +110,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg)
return swab16(i2c_smbus_read_word_data(client, reg));
}
-/* All registers are word-sized, except for the configuration register.
- DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == DS1621_REG_CONF)
@@ -139,50 +136,61 @@ static void ds1621_init_client(struct i2c_client *client)
i2c_smbus_write_byte(client, DS1621_COM_START);
}
-#define show(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct ds1621_data *data = ds1621_update_client(dev); \
- return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ return sprintf(buf, "%d\n",
+ LM75_TEMP_FROM_REG(data->temp[attr->index]));
}
-show(temp);
-show(temp_min);
-show(temp_max);
-
-#define set_temp(suffix, value, reg) \
-static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct ds1621_data *data = ds1621_update_client(dev); \
- u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
- \
- mutex_lock(&data->update_lock); \
- data->value = val; \
- ds1621_write_value(client, reg, data->value); \
- mutex_unlock(&data->update_lock); \
- return count; \
-}
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));
-set_temp(min, temp_min, DS1621_REG_TEMP_MIN);
-set_temp(max, temp_max, DS1621_REG_TEMP_MAX);
+ mutex_lock(&data->update_lock);
+ data->temp[attr->index] = val;
+ ds1621_write_value(client, DS1621_REG_TEMP[attr->index],
+ data->temp[attr->index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct ds1621_data *data = ds1621_update_client(dev);
return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ return sprintf(buf, "%d\n", !!(data->conf & attr->index));
+}
+
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+ DS1621_ALARM_TEMP_LOW);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+ DS1621_ALARM_TEMP_HIGH);
static struct attribute *ds1621_attributes[] = {
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp1_max.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
NULL
};
@@ -204,9 +212,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
int kind)
{
int conf, temp;
- struct i2c_client *new_client;
+ struct i2c_client *client;
struct ds1621_data *data;
- int err = 0;
+ int i, err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA
@@ -221,55 +229,44 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
goto exit;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &ds1621_driver;
- new_client->flags = 0;
-
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &ds1621_driver;
/* Now, we do the remaining detection. It is lousy. */
if (kind < 0) {
/* The NVB bit should be low if no EEPROM write has been
requested during the latest 10ms, which is highly
improbable in our case. */
- conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+ conf = ds1621_read_value(client, DS1621_REG_CONF);
if (conf & DS1621_REG_CONFIG_NVB)
goto exit_free;
/* The 7 lowest bits of a temperature should always be 0. */
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
- if (temp & 0x007f)
- goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
- if (temp & 0x007f)
- goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
- if (temp & 0x007f)
- goto exit_free;
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
+ if (temp & 0x007f)
+ goto exit_free;
+ }
}
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = ds1621;
-
/* Fill in remaining client fields and put it into the global list */
- strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
- data->valid = 0;
+ strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto exit_free;
/* Initialize the DS1621 chip */
- ds1621_init_client(new_client);
+ ds1621_init_client(client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group)))
+ if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -278,9 +275,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &ds1621_group);
+ sysfs_remove_group(&client->dev.kobj, &ds1621_group);
exit_detach:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -314,23 +311,21 @@ static struct ds1621_data *ds1621_update_client(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
+ int i;
dev_dbg(&client->dev, "Starting ds1621 update\n");
data->conf = ds1621_read_value(client, DS1621_REG_CONF);
- data->temp = ds1621_read_value(client, DS1621_REG_TEMP);
-
- data->temp_min = ds1621_read_value(client,
- DS1621_REG_TEMP_MIN);
- data->temp_max = ds1621_read_value(client,
- DS1621_REG_TEMP_MAX);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ data->temp[i] = ds1621_read_value(client,
+ DS1621_REG_TEMP[i]);
/* reset alarms if necessary */
new_conf = data->conf;
- if (data->temp > data->temp_min)
+ if (data->temp[0] > data->temp[1]) /* input > min */
new_conf &= ~DS1621_ALARM_TEMP_LOW;
- if (data->temp < data->temp_max)
+ if (data->temp[0] < data->temp[2]) /* input < max */
new_conf &= ~DS1621_ALARM_TEMP_HIGH;
if (data->conf != new_conf)
ds1621_write_value(client, DS1621_REG_CONF,