summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/ds1621.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/ds1621.c')
-rw-r--r--drivers/hwmon/ds1621.c172
1 files changed, 83 insertions, 89 deletions
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 7415381601c..53f88f51181 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -81,71 +81,84 @@ struct ds1621_data {
u8 conf; /* Register encoding, combined */
};
-static int ds1621_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int ds1621_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static void ds1621_init_client(struct i2c_client *client);
-static int ds1621_remove(struct i2c_client *client);
-static struct ds1621_data *ds1621_update_client(struct device *dev);
-
-static const struct i2c_device_id ds1621_id[] = {
- { "ds1621", ds1621 },
- { "ds1625", ds1621 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ds1621_id);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver ds1621_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "ds1621",
- },
- .probe = ds1621_probe,
- .remove = ds1621_remove,
- .id_table = ds1621_id,
- .detect = ds1621_detect,
- .address_data = &addr_data,
-};
-
-/* All registers are word-sized, except for the configuration register.
+/* Temperature registers are word-sized.
DS1621 uses a high-byte first convention, which is exactly opposite to
the SMBus standard. */
-static int ds1621_read_value(struct i2c_client *client, u8 reg)
+static int ds1621_read_temp(struct i2c_client *client, u8 reg)
{
- if (reg == DS1621_REG_CONF)
- return i2c_smbus_read_byte_data(client, reg);
- else
- return swab16(i2c_smbus_read_word_data(client, reg));
+ int ret;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0)
+ return ret;
+ return swab16(ret);
}
-static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
+static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
{
- if (reg == DS1621_REG_CONF)
- return i2c_smbus_write_byte_data(client, reg, value);
- else
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_data(client, reg, swab16(value));
}
static void ds1621_init_client(struct i2c_client *client)
{
- int reg = ds1621_read_value(client, DS1621_REG_CONF);
+ u8 conf, new_conf;
+
+ new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
/* switch to continuous conversion mode */
- reg &= ~ DS1621_REG_CONFIG_1SHOT;
+ new_conf &= ~DS1621_REG_CONFIG_1SHOT;
/* setup output polarity */
if (polarity == 0)
- reg &= ~DS1621_REG_CONFIG_POLARITY;
+ new_conf &= ~DS1621_REG_CONFIG_POLARITY;
else if (polarity == 1)
- reg |= DS1621_REG_CONFIG_POLARITY;
+ new_conf |= DS1621_REG_CONFIG_POLARITY;
- ds1621_write_value(client, DS1621_REG_CONF, reg);
+ if (conf != new_conf)
+ i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
/* start conversion */
i2c_smbus_write_byte(client, DS1621_COM_START);
}
+static struct ds1621_data *ds1621_update_client(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1621_data *data = i2c_get_clientdata(client);
+ u8 new_conf;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ int i;
+
+ dev_dbg(&client->dev, "Starting ds1621 update\n");
+
+ data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ data->temp[i] = ds1621_read_temp(client,
+ DS1621_REG_TEMP[i]);
+
+ /* reset alarms if necessary */
+ new_conf = data->conf;
+ if (data->temp[0] > data->temp[1]) /* input > min */
+ new_conf &= ~DS1621_ALARM_TEMP_LOW;
+ if (data->temp[0] < data->temp[2]) /* input < max */
+ new_conf &= ~DS1621_ALARM_TEMP_HIGH;
+ if (data->conf != new_conf)
+ i2c_smbus_write_byte_data(client, DS1621_REG_CONF,
+ new_conf);
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
static ssize_t show_temp(struct device *dev, struct device_attribute *da,
char *buf)
{
@@ -160,13 +173,13 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
- struct ds1621_data *data = ds1621_update_client(dev);
+ struct ds1621_data *data = i2c_get_clientdata(client);
u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
- ds1621_write_value(client, DS1621_REG_TEMP[attr->index],
- data->temp[attr->index]);
+ ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -228,13 +241,14 @@ static int ds1621_detect(struct i2c_client *client, int kind,
/* The NVB bit should be low if no EEPROM write has been
requested during the latest 10ms, which is highly
improbable in our case. */
- conf = ds1621_read_value(client, DS1621_REG_CONF);
- if (conf & DS1621_REG_CONFIG_NVB)
+ conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+ if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
return -ENODEV;
/* The 7 lowest bits of a temperature should always be 0. */
for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
- temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
- if (temp & 0x007f)
+ temp = i2c_smbus_read_word_data(client,
+ DS1621_REG_TEMP[i]);
+ if (temp < 0 || (temp & 0x7f00))
return -ENODEV;
}
}
@@ -294,45 +308,25 @@ static int ds1621_remove(struct i2c_client *client)
return 0;
}
+static const struct i2c_device_id ds1621_id[] = {
+ { "ds1621", ds1621 },
+ { "ds1625", ds1621 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1621_id);
-static struct ds1621_data *ds1621_update_client(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1621_data *data = i2c_get_clientdata(client);
- u8 new_conf;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
- || !data->valid) {
- int i;
-
- dev_dbg(&client->dev, "Starting ds1621 update\n");
-
- data->conf = ds1621_read_value(client, DS1621_REG_CONF);
-
- for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = ds1621_read_value(client,
- DS1621_REG_TEMP[i]);
-
- /* reset alarms if necessary */
- new_conf = data->conf;
- if (data->temp[0] > data->temp[1]) /* input > min */
- new_conf &= ~DS1621_ALARM_TEMP_LOW;
- if (data->temp[0] < data->temp[2]) /* input < max */
- new_conf &= ~DS1621_ALARM_TEMP_HIGH;
- if (data->conf != new_conf)
- ds1621_write_value(client, DS1621_REG_CONF,
- new_conf);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
+/* This is the driver that will be inserted */
+static struct i2c_driver ds1621_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "ds1621",
+ },
+ .probe = ds1621_probe,
+ .remove = ds1621_remove,
+ .id_table = ds1621_id,
+ .detect = ds1621_detect,
+ .address_data = &addr_data,
+};
static int __init ds1621_init(void)
{