summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/f75375s.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/f75375s.c')
-rw-r--r--drivers/hwmon/f75375s.c382
1 files changed, 300 insertions, 82 deletions
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 95cbfb3a707..6aa5a9fad87 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -1,16 +1,19 @@
/*
- * f75375s.c - driver for the Fintek F75375/SP and F75373
- * hardware monitoring features
+ * f75375s.c - driver for the Fintek F75375/SP, F75373 and
+ * F75387SG/RG hardware monitoring features
* Copyright (C) 2006-2007 Riku Voipio
*
* Datasheets available at:
*
* f75375:
- * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
*
* f75373:
* http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
*
+ * f75387:
+ * http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -40,7 +43,7 @@
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
-enum chips { f75373, f75375 };
+enum chips { f75373, f75375, f75387 };
/* Fintek F75375 registers */
#define F75375_REG_CONFIG0 0x0
@@ -59,6 +62,7 @@ enum chips { f75373, f75375 };
#define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
#define F75375_REG_TEMP(nr) (0x14 + (nr))
+#define F75387_REG_TEMP11_LSB(nr) (0x1a + (nr))
#define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
#define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
@@ -78,8 +82,11 @@ enum chips { f75373, f75375 };
#define F75375_REG_PWM1_DROP_DUTY 0x6B
#define F75375_REG_PWM2_DROP_DUTY 0x6C
-#define FAN_CTRL_LINEAR(nr) (4 + nr)
+#define F75375_FAN_CTRL_LINEAR(nr) (4 + nr)
+#define F75387_FAN_CTRL_LINEAR(nr) (1 + ((nr) * 4))
#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2))
+#define F75387_FAN_DUTY_MODE(nr) (2 + ((nr) * 4))
+#define F75387_FAN_MANU_MODE(nr) ((nr) * 4)
/*
* Data structures and manipulation thereof
@@ -102,13 +109,18 @@ struct f75375_data {
u8 in_min[4];
u16 fan[2];
u16 fan_min[2];
- u16 fan_full[2];
- u16 fan_exp[2];
+ u16 fan_max[2];
+ u16 fan_target[2];
u8 fan_timer;
u8 pwm[2];
u8 pwm_mode[2];
u8 pwm_enable[2];
- s8 temp[2];
+ /*
+ * f75387: For remote temperature reading, it uses signed 11-bit
+ * values with LSB = 0.125 degree Celsius, left-justified in 16-bit
+ * registers. For original 8-bit temp readings, the LSB just is 0.
+ */
+ s16 temp11[2];
s8 temp_high[2];
s8 temp_max_hyst[2];
};
@@ -122,6 +134,7 @@ static int f75375_remove(struct i2c_client *client);
static const struct i2c_device_id f75375_id[] = {
{ "f75373", f75373 },
{ "f75375", f75375 },
+ { "f75387", f75387 },
{ }
};
MODULE_DEVICE_TABLE(i2c, f75375_id);
@@ -146,8 +159,8 @@ static inline int f75375_read8(struct i2c_client *client, u8 reg)
/* in most cases, should be called while holding update_lock */
static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
{
- return ((i2c_smbus_read_byte_data(client, reg) << 8)
- | i2c_smbus_read_byte_data(client, reg + 1));
+ return (i2c_smbus_read_byte_data(client, reg) << 8)
+ | i2c_smbus_read_byte_data(client, reg + 1);
}
static inline void f75375_write8(struct i2c_client *client, u8 reg,
@@ -159,12 +172,22 @@ static inline void f75375_write8(struct i2c_client *client, u8 reg,
static inline void f75375_write16(struct i2c_client *client, u8 reg,
u16 value)
{
- int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
+ int err = i2c_smbus_write_byte_data(client, reg, (value >> 8));
if (err)
return;
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
+static void f75375_write_pwm(struct i2c_client *client, int nr)
+{
+ struct f75375_data *data = i2c_get_clientdata(client);
+ if (data->kind == f75387)
+ f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
+ else
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+}
+
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -181,15 +204,12 @@ static struct f75375_data *f75375_update_device(struct device *dev)
f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
data->temp_max_hyst[nr] =
f75375_read8(client, F75375_REG_TEMP_HYST(nr));
- data->fan_full[nr] =
+ data->fan_max[nr] =
f75375_read16(client, F75375_REG_FAN_FULL(nr));
data->fan_min[nr] =
f75375_read16(client, F75375_REG_FAN_MIN(nr));
- data->fan_exp[nr] =
+ data->fan_target[nr] =
f75375_read16(client, F75375_REG_FAN_EXP(nr));
- data->pwm[nr] = f75375_read8(client,
- F75375_REG_FAN_PWM_DUTY(nr));
-
}
for (nr = 0; nr < 4; nr++) {
data->in_max[nr] =
@@ -205,8 +225,16 @@ static struct f75375_data *f75375_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + 2 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
- data->temp[nr] =
- f75375_read8(client, F75375_REG_TEMP(nr));
+ data->pwm[nr] = f75375_read8(client,
+ F75375_REG_FAN_PWM_DUTY(nr));
+ /* assign MSB, therefore shift it by 8 bits */
+ data->temp11[nr] =
+ f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
+ if (data->kind == f75387)
+ /* merge F75387's temperature LSB (11-bit) */
+ data->temp11[nr] |=
+ f75375_read8(client,
+ F75387_REG_TEMP11_LSB(nr));
data->fan[nr] =
f75375_read16(client, F75375_REG_FAN(nr));
}
@@ -226,14 +254,44 @@ static inline u16 rpm_from_reg(u16 reg)
{
if (reg == 0 || reg == 0xffff)
return 0;
- return (1500000 / reg);
+ return 1500000 / reg;
}
static inline u16 rpm_to_reg(int rpm)
{
if (rpm < 367 || rpm > 0xffff)
return 0xffff;
- return (1500000 / rpm);
+ return 1500000 / rpm;
+}
+
+static bool duty_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ case 2: /* Auto, speed mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ default:
+ BUG();
+ }
+}
+
+static bool auto_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ case 2: /* Auto, speed mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ default:
+ BUG();
+ }
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
@@ -242,7 +300,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] = rpm_to_reg(val);
@@ -251,17 +314,27 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
return count;
}
-static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr,
+static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ if (auto_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+ if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
mutex_lock(&data->update_lock);
- data->fan_exp[nr] = rpm_to_reg(val);
- f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]);
+ data->fan_target[nr] = rpm_to_reg(val);
+ f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -272,11 +345,20 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ if (auto_mode_enabled(data->pwm_enable[nr]) ||
+ !duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
mutex_lock(&data->update_lock);
data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+ f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
}
@@ -298,26 +380,58 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
- fanmode &= ~(3 << FAN_CTRL_MODE(nr));
-
- switch (val) {
- case 0: /* Full speed */
- fanmode |= (3 << FAN_CTRL_MODE(nr));
- data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
- break;
- case 1: /* PWM */
- fanmode |= (3 << FAN_CTRL_MODE(nr));
- break;
- case 2: /* AUTOMATIC*/
- fanmode |= (2 << FAN_CTRL_MODE(nr));
- break;
- case 3: /* fan speed */
- break;
+ if (data->kind == f75387) {
+ /* For now, deny dangerous toggling of duty mode */
+ if (duty_mode_enabled(data->pwm_enable[nr]) !=
+ duty_mode_enabled(val))
+ return -EOPNOTSUPP;
+ /* clear each fanX_mode bit before setting them properly */
+ fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
+ fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
+ switch (val) {
+ case 0: /* full speed */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ data->pwm[nr] = 255;
+ break;
+ case 1: /* PWM */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
+ case 2: /* Automatic, speed mode */
+ break;
+ case 3: /* fan speed */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ break;
+ case 4: /* Automatic, pwm */
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
+ }
+ } else {
+ /* clear each fanX_mode bit before setting them properly */
+ fanmode &= ~(3 << FAN_CTRL_MODE(nr));
+ switch (val) {
+ case 0: /* full speed */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ data->pwm[nr] = 255;
+ break;
+ case 1: /* PWM */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ break;
+ case 2: /* AUTOMATIC*/
+ fanmode |= (1 << FAN_CTRL_MODE(nr));
+ break;
+ case 3: /* fan speed */
+ break;
+ case 4: /* Automatic pwm */
+ return -EINVAL;
+ }
}
+
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val == 0)
+ f75375_write_pwm(client, nr);
return 0;
}
@@ -327,8 +441,12 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
- int err = 0;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
mutex_lock(&data->update_lock);
err = set_pwm_enable_direct(client, nr, val);
@@ -342,20 +460,39 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
- u8 conf = 0;
+ unsigned long val;
+ int err;
+ u8 conf;
+ char reg, ctrl;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
if (!(val == 0 || val == 1))
return -EINVAL;
+ /* F75373 does not support DC (linear voltage) fan control mode */
+ if (data->kind == f75373 && val == 0)
+ return -EINVAL;
+
+ /* take care for different registers */
+ if (data->kind == f75387) {
+ reg = F75375_REG_FAN_TIMER;
+ ctrl = F75387_FAN_CTRL_LINEAR(nr);
+ } else {
+ reg = F75375_REG_CONFIG1;
+ ctrl = F75375_FAN_CTRL_LINEAR(nr);
+ }
+
mutex_lock(&data->update_lock);
- conf = f75375_read8(client, F75375_REG_CONFIG1);
- conf &= ~(1 << FAN_CTRL_LINEAR(nr));
+ conf = f75375_read8(client, reg);
+ conf &= ~(1 << ctrl);
if (val == 0)
- conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
+ conf |= (1 << ctrl);
- f75375_write8(client, F75375_REG_CONFIG1, conf);
+ f75375_write8(client, reg, conf);
data->pwm_mode[nr] = val;
mutex_unlock(&data->update_lock);
return count;
@@ -410,7 +547,13 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_max[nr] = val;
@@ -425,7 +568,13 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_min[nr] = val;
@@ -435,13 +584,14 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
}
#define TEMP_FROM_REG(val) ((val) * 1000)
#define TEMP_TO_REG(val) ((val) / 1000)
+#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125)
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+static ssize_t show_temp11(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+ return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
@@ -466,7 +616,13 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_high[nr] = val;
@@ -481,7 +637,13 @@ static ssize_t set_temp_max_hyst(struct device *dev,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_max_hyst[nr] = val;
@@ -502,8 +664,8 @@ static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
show_fan(fan);
show_fan(fan_min);
-show_fan(fan_full);
-show_fan(fan_exp);
+show_fan(fan_max);
+show_fan(fan_target);
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
@@ -525,28 +687,28 @@ static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 3);
static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 3);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 1);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO, show_fan_max, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 0);
-static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR,
- show_fan_exp, set_fan_exp, 0);
+static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO|S_IWUSR,
+ show_fan_target, set_fan_target, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_max, S_IRUGO, show_fan_max, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 1);
-static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR,
- show_fan_exp, set_fan_exp, 1);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO|S_IWUSR,
+ show_fan_target, set_fan_target, 1);
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
@@ -568,13 +730,13 @@ static struct attribute *f75375_attributes[] = {
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
- &sensor_dev_attr_fan1_full.dev_attr.attr,
+ &sensor_dev_attr_fan1_max.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
- &sensor_dev_attr_fan1_exp.dev_attr.attr,
+ &sensor_dev_attr_fan1_target.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
- &sensor_dev_attr_fan2_full.dev_attr.attr,
+ &sensor_dev_attr_fan2_max.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
- &sensor_dev_attr_fan2_exp.dev_attr.attr,
+ &sensor_dev_attr_fan2_target.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
@@ -604,12 +766,62 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
struct f75375s_platform_data *f75375s_pdata)
{
int nr;
+
+ if (!f75375s_pdata) {
+ u8 conf, mode;
+ int nr;
+
+ conf = f75375_read8(client, F75375_REG_CONFIG1);
+ mode = f75375_read8(client, F75375_REG_FAN_TIMER);
+ for (nr = 0; nr < 2; nr++) {
+ if (data->kind == f75387) {
+ bool manu, duty;
+
+ if (!(mode & (1 << F75387_FAN_CTRL_LINEAR(nr))))
+ data->pwm_mode[nr] = 1;
+
+ manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
+ duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
+ if (!manu && duty)
+ /* auto, pwm */
+ data->pwm_enable[nr] = 4;
+ else if (manu && !duty)
+ /* manual, speed */
+ data->pwm_enable[nr] = 3;
+ else if (!manu && !duty)
+ /* automatic, speed */
+ data->pwm_enable[nr] = 2;
+ else
+ /* manual, pwm */
+ data->pwm_enable[nr] = 1;
+ } else {
+ if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
+ data->pwm_mode[nr] = 1;
+
+ switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
+ case 0: /* speed */
+ data->pwm_enable[nr] = 3;
+ break;
+ case 1: /* automatic */
+ data->pwm_enable[nr] = 2;
+ break;
+ default: /* manual */
+ data->pwm_enable[nr] = 1;
+ break;
+ }
+ }
+ }
+ return;
+ }
+
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
+ if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
+ !duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
+ continue;
data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
+ f75375_write_pwm(client, nr);
}
}
@@ -624,17 +836,19 @@ static int f75375_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL)))
+ data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL);
+ if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->kind = id->driver_data;
- if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
+ err = sysfs_create_group(&client->dev.kobj, &f75375_group);
+ if (err)
goto exit_free;
- if (data->kind == f75375) {
+ if (data->kind != f75373) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
@@ -653,8 +867,7 @@ static int f75375_probe(struct i2c_client *client,
goto exit_remove;
}
- if (f75375s_pdata != NULL)
- f75375_init(client, data, f75375s_pdata);
+ f75375_init(client, data, f75375s_pdata);
return 0;
@@ -685,10 +898,15 @@ static int f75375_detect(struct i2c_client *client,
vendid = f75375_read16(client, F75375_REG_VENDOR);
chipid = f75375_read16(client, F75375_CHIP_ID);
- if (chipid == 0x0306 && vendid == 0x1934)
+ if (vendid != 0x1934)
+ return -ENODEV;
+
+ if (chipid == 0x0306)
name = "f75375";
- else if (chipid == 0x0204 && vendid == 0x1934)
+ else if (chipid == 0x0204)
name = "f75373";
+ else if (chipid == 0x0410)
+ name = "f75387";
else
return -ENODEV;
@@ -711,7 +929,7 @@ static void __exit sensors_f75375_exit(void)
MODULE_AUTHOR("Riku Voipio");
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
+MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver");
module_init(sensors_f75375_init);
module_exit(sensors_f75375_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 03:37:41 +0000