diff options
Diffstat (limited to 'drivers/hwmon/fschmd.c')
| -rw-r--r-- | drivers/hwmon/fschmd.c | 235 |
1 files changed, 145 insertions, 90 deletions
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index aa6d8b686f8..519ce8b9c14 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -1,4 +1,5 @@ -/* fschmd.c +/* + * fschmd.c * * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com> * @@ -52,8 +53,8 @@ static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -76,12 +77,12 @@ enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl }; #define FSCHMD_CONTROL_ALERT_LED 0x01 /* watchdog */ -static const u8 FSCHMD_REG_WDOG_CONTROL[7] = - { 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 }; -static const u8 FSCHMD_REG_WDOG_STATE[7] = - { 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 }; -static const u8 FSCHMD_REG_WDOG_PRESET[7] = - { 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a }; +static const u8 FSCHMD_REG_WDOG_CONTROL[7] = { + 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 }; +static const u8 FSCHMD_REG_WDOG_STATE[7] = { + 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 }; +static const u8 FSCHMD_REG_WDOG_PRESET[7] = { + 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a }; #define FSCHMD_WDOG_CONTROL_TRIGGER 0x10 #define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */ @@ -103,10 +104,12 @@ static const u8 FSCHMD_REG_VOLT[7][6] = { static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 }; -/* minimum pwm at which the fan is driven (pwm can by increased depending on - the temp. Notice that for the scy some fans share there minimum speed. - Also notice that with the scy the sensor order is different than with the - other chips, this order was in the 2.4 driver and kept for consistency. */ +/* + * minimum pwm at which the fan is driven (pwm can by increased depending on + * the temp. Notice that for the scy some fans share there minimum speed. + * Also notice that with the scy the sensor order is different than with the + * other chips, this order was in the 2.4 driver and kept for consistency. + */ static const u8 FSCHMD_REG_FAN_MIN[7][7] = { { 0x55, 0x65 }, /* pos */ { 0x55, 0x65, 0xb5 }, /* her */ @@ -182,11 +185,13 @@ static const u8 FSCHMD_REG_TEMP_STATE[7][11] = { 0xb9, 0xc9, 0xd9, 0xe9, 0xf9 }, }; -/* temperature high limit registers, FSC does not document these. Proven to be - there with field testing on the fscher and fschrc, already supported / used - in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers - at these addresses, but doesn't want to confirm they are the same as with - the fscher?? */ +/* + * temperature high limit registers, FSC does not document these. Proven to be + * there with field testing on the fscher and fschrc, already supported / used + * in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers + * at these addresses, but doesn't want to confirm they are the same as with + * the fscher?? + */ static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = { { 0, 0, 0 }, /* pos */ { 0x76, 0x86, 0x96 }, /* her */ @@ -198,13 +203,15 @@ static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = { 0xba, 0xca, 0xda, 0xea, 0xfa }, }; -/* These were found through experimenting with an fscher, currently they are - not used, but we keep them around for future reference. - On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc), - AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence - the fan speed. -static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; -static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ +/* + * These were found through experimenting with an fscher, currently they are + * not used, but we keep them around for future reference. + * On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc), + * AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence + * the fan speed. + * static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; + * static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; + */ static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 }; @@ -290,24 +297,30 @@ struct fschmd_data { u8 fan_ripple[7]; /* divider for rps */ }; -/* Global variables to hold information read from special DMI tables, which are - available on FSC machines with an fscher or later chip. There is no need to - protect these with a lock as they are only modified from our attach function - which always gets called with the i2c-core lock held and never accessed - before the attach function is done with them. */ +/* + * Global variables to hold information read from special DMI tables, which are + * available on FSC machines with an fscher or later chip. There is no need to + * protect these with a lock as they are only modified from our attach function + * which always gets called with the i2c-core lock held and never accessed + * before the attach function is done with them. + */ static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 }; static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 }; static int dmi_vref = -1; -/* Somewhat ugly :( global data pointer list with all fschmd devices, so that - we can find our device data as when using misc_register there is no other - method to get to ones device data from the open fop. */ +/* + * Somewhat ugly :( global data pointer list with all fschmd devices, so that + * we can find our device data as when using misc_register there is no other + * method to get to ones device data from the open fop. + */ static LIST_HEAD(watchdog_data_list); /* Note this lock not only protect list access, but also data.kref access */ static DEFINE_MUTEX(watchdog_data_mutex); -/* Release our data struct when we're detached from the i2c client *and* all - references to our watchdog device are released */ +/* + * Release our data struct when we're detached from the i2c client *and* all + * references to our watchdog device are released + */ static void fschmd_release_resources(struct kref *ref) { struct fschmd_data *data = container_of(ref, struct fschmd_data, kref); @@ -359,9 +372,14 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute { int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = dev_get_drvdata(dev); - long v = simple_strtol(buf, NULL, 10) / 1000; + long v; + int err; - v = SENSORS_LIMIT(v, -128, 127) + 128; + err = kstrtol(buf, 10, &v); + if (err) + return err; + + v = SENSORS_LIMIT(v / 1000, -128, 127) + 128; mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(to_i2c_client(dev), @@ -427,12 +445,23 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = dev_get_drvdata(dev); /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; + case 2: + v = 1; + break; + case 4: + v = 2; + break; + case 8: + v = 3; + break; default: dev_err(dev, "fan_div value %lu not supported. " "Choose one of 2, 4 or 8!\n", v); @@ -502,7 +531,12 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev, { int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = dev_get_drvdata(dev); - unsigned long v = simple_strtoul(buf, NULL, 10); + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */ if (v || data->kind == fscsyl) { @@ -522,8 +556,10 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev, } -/* The FSC hwmon family has the ability to force an attached alert led to flash - from software, we export this as an alert_led sysfs attr */ +/* + * The FSC hwmon family has the ability to force an attached alert led to flash + * from software, we export this as an alert_led sysfs attr + */ static ssize_t show_alert_led(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -540,7 +576,12 @@ static ssize_t store_alert_led(struct device *dev, { u8 reg; struct fschmd_data *data = dev_get_drvdata(dev); - unsigned long v = simple_strtoul(buf, NULL, 10); + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; mutex_lock(&data->update_lock); @@ -754,8 +795,10 @@ static int watchdog_stop(struct fschmd_data *data) } data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED; - /* Don't store the stop flag in our watchdog control register copy, as - its a write only bit (read always returns 0) */ + /* + * Don't store the stop flag in our watchdog control register copy, as + * its a write only bit (read always returns 0) + */ i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL[data->kind], data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP); @@ -769,10 +812,12 @@ static int watchdog_open(struct inode *inode, struct file *filp) struct fschmd_data *pos, *data = NULL; int watchdog_is_open; - /* We get called from drivers/char/misc.c with misc_mtx hold, and we - call misc_register() from fschmd_probe() with watchdog_data_mutex - hold, as misc_register() takes the misc_mtx lock, this is a possible - deadlock, so we use mutex_trylock here. */ + /* + * We get called from drivers/char/misc.c with misc_mtx hold, and we + * call misc_register() from fschmd_probe() with watchdog_data_mutex + * hold, as misc_register() takes the misc_mtx lock, this is a possible + * deadlock, so we use mutex_trylock here. + */ if (!mutex_trylock(&watchdog_data_mutex)) return -ERESTARTSYS; list_for_each_entry(pos, &watchdog_data_list, list) { @@ -847,7 +892,8 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf, return count; } -static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +static long watchdog_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) { struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | @@ -930,30 +976,38 @@ static const struct file_operations watchdog_fops = { * Detect, register, unregister and update device functions */ -/* DMI decode routine to read voltage scaling factors from special DMI tables, - which are available on FSC machines with an fscher or later chip. */ +/* + * DMI decode routine to read voltage scaling factors from special DMI tables, + * which are available on FSC machines with an fscher or later chip. + */ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy) { int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0; - /* dmi code ugliness, we get passed the address of the contents of - a complete DMI record, but in the form of a dmi_header pointer, in - reality this address holds header->length bytes of which the header - are the first 4 bytes */ + /* + * dmi code ugliness, we get passed the address of the contents of + * a complete DMI record, but in the form of a dmi_header pointer, in + * reality this address holds header->length bytes of which the header + * are the first 4 bytes + */ u8 *dmi_data = (u8 *)header; /* We are looking for OEM-specific type 185 */ if (header->type != 185) return; - /* we are looking for what Siemens calls "subtype" 19, the subtype - is stored in byte 5 of the dmi block */ + /* + * we are looking for what Siemens calls "subtype" 19, the subtype + * is stored in byte 5 of the dmi block + */ if (header->length < 5 || dmi_data[4] != 19) return; - /* After the subtype comes 1 unknown byte and then blocks of 5 bytes, - consisting of what Siemens calls an "Entity" number, followed by - 2 16-bit words in LSB first order */ + /* + * After the subtype comes 1 unknown byte and then blocks of 5 bytes, + * consisting of what Siemens calls an "Entity" number, followed by + * 2 16-bit words in LSB first order + */ for (i = 6; (i + 4) < header->length; i += 5) { /* entity 1 - 3: voltage multiplier and offset */ if (dmi_data[i] >= 1 && dmi_data[i] <= 3) { @@ -988,9 +1042,11 @@ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy) dmi_mult[i] = mult[i] * 10; dmi_offset[i] = offset[i] * 10; } - /* According to the docs there should be separate dmi entries - for the mult's and offsets of in3-5 of the syl, but on - my test machine these are not present */ + /* + * According to the docs there should be separate dmi entries + * for the mult's and offsets of in3-5 of the syl, but on + * my test machine these are not present + */ dmi_mult[3] = dmi_mult[2]; dmi_mult[4] = dmi_mult[1]; dmi_mult[5] = dmi_mult[2]; @@ -1058,15 +1114,19 @@ static int fschmd_probe(struct i2c_client *client, mutex_init(&data->watchdog_lock); INIT_LIST_HEAD(&data->list); kref_init(&data->kref); - /* Store client pointer in our data struct for watchdog usage - (where the client is found through a data ptr instead of the - otherway around) */ + /* + * Store client pointer in our data struct for watchdog usage + * (where the client is found through a data ptr instead of the + * otherway around) + */ data->client = client; data->kind = kind; if (kind == fscpos) { - /* The Poseidon has hardwired temp limits, fill these - in for the alarm resetting code */ + /* + * The Poseidon has hardwired temp limits, fill these + * in for the alarm resetting code + */ data->temp_max[0] = 70 + 128; data->temp_max[1] = 50 + 128; data->temp_max[2] = 50 + 128; @@ -1157,9 +1217,11 @@ static int fschmd_probe(struct i2c_client *client, goto exit_detach; } - /* We take the data_mutex lock early so that watchdog_open() cannot - run when misc_register() has completed, but we've not yet added - our data to the watchdog_data_list (and set the default timeout) */ + /* + * We take the data_mutex lock early so that watchdog_open() cannot + * run when misc_register() has completed, but we've not yet added + * our data to the watchdog_data_list (and set the default timeout) + */ mutex_lock(&watchdog_data_mutex); for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { /* Register our watchdog part */ @@ -1225,8 +1287,10 @@ static int fschmd_remove(struct i2c_client *client) mutex_unlock(&data->watchdog_lock); } - /* Check if registered in case we're called from fschmd_detect - to cleanup after an error */ + /* + * Check if registered in case we're called from fschmd_detect + * to cleanup after an error + */ if (data->hwmon_dev) hwmon_device_unregister(data->hwmon_dev); @@ -1269,8 +1333,10 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) client, FSCHMD_REG_TEMP_LIMIT[data->kind][i]); - /* reset alarm if the alarm condition is gone, - the chip doesn't do this itself */ + /* + * reset alarm if the alarm condition is gone, + * the chip doesn't do this itself + */ if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) == FSCHMD_TEMP_ALARM_MASK && data->temp_act[i] < data->temp_max[i]) @@ -1314,20 +1380,9 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) return data; } -static int __init fschmd_init(void) -{ - return i2c_add_driver(&fschmd_driver); -} - -static void __exit fschmd_exit(void) -{ - i2c_del_driver(&fschmd_driver); -} +module_i2c_driver(fschmd_driver); MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades " "and Syleus driver"); MODULE_LICENSE("GPL"); - -module_init(fschmd_init); -module_exit(fschmd_exit); |