diff options
Diffstat (limited to 'drivers/hwmon/it87.c')
-rw-r--r-- | drivers/hwmon/it87.c | 30 |
1 files changed, 21 insertions, 9 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index b74c95735f9..0e0d692f0c9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -14,6 +14,7 @@ IT8712F Super I/O chip w/LPC interface IT8716F Super I/O chip w/LPC interface IT8718F Super I/O chip w/LPC interface + IT8720F Super I/O chip w/LPC interface IT8726F Super I/O chip w/LPC interface Sis950 A clone of the IT8705F @@ -52,7 +53,7 @@ #define DRVNAME "it87" -enum chips { it87, it8712, it8716, it8718 }; +enum chips { it87, it8712, it8716, it8718, it8720 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -64,7 +65,10 @@ static struct platform_device *pdev; #define DEV 0x07 /* Register: Logical device select */ #define VAL 0x2f /* The value to read/write */ #define PME 0x04 /* The device with the fan registers in it */ -#define GPIO 0x07 /* The device with the IT8718F VID value in it */ + +/* The device with the IT8718F/IT8720F VID value in it */ +#define GPIO 0x07 + #define DEVID 0x20 /* Register: Device ID */ #define DEVREV 0x22 /* Register: Device Revision */ @@ -113,6 +117,7 @@ superio_exit(void) #define IT8705F_DEVID 0x8705 #define IT8716F_DEVID 0x8716 #define IT8718F_DEVID 0x8718 +#define IT8720F_DEVID 0x8720 #define IT8726F_DEVID 0x8726 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 @@ -150,8 +155,8 @@ static int fix_pwm_polarity; #define IT87_REG_ALARM2 0x02 #define IT87_REG_ALARM3 0x03 -/* The IT8718F has the VID value in a different register, in Super-I/O - configuration space. */ +/* The IT8718F and IT8720F have the VID value in a different register, in + Super-I/O configuration space. */ #define IT87_REG_VID 0x0a /* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b for fan divisors. Later IT8712F revisions must use 16-bit tachometer @@ -282,7 +287,8 @@ static inline int has_16bit_fans(const struct it87_data *data) return (data->type == it87 && data->revision >= 0x03) || (data->type == it8712 && data->revision >= 0x08) || data->type == it8716 - || data->type == it8718; + || data->type == it8718 + || data->type == it8720; } static int it87_probe(struct platform_device *pdev); @@ -992,6 +998,9 @@ static int __init it87_find(unsigned short *address, case IT8718F_DEVID: sio_data->type = it8718; break; + case IT8720F_DEVID: + sio_data->type = it8720; + break; case 0xffff: /* No device at all */ goto exit; default: @@ -1022,7 +1031,8 @@ static int __init it87_find(unsigned short *address, int reg; superio_select(GPIO); - if (chip_type == it8718) + if ((chip_type == it8718) || + (chip_type == it8720)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1068,6 +1078,7 @@ static int __devinit it87_probe(struct platform_device *pdev) "it8712", "it8716", "it8718", + "it8720", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -1226,7 +1237,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } if (data->type == it8712 || data->type == it8716 - || data->type == it8718) { + || data->type == it8718 || data->type == it8720) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; @@ -1513,7 +1524,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability. - The 8718 does not use IT87_REG_VID for the same purpose. */ + The 8718 and the 8720 don't use IT87_REG_VID for the + same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, @@ -1608,7 +1620,7 @@ static void __exit sm_it87_exit(void) MODULE_AUTHOR("Chris Gauthron, " "Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver"); +MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); module_param(fix_pwm_polarity, bool, 0); |