diff options
Diffstat (limited to 'drivers/hwmon/it87.c')
| -rw-r--r-- | drivers/hwmon/it87.c | 85 |
1 files changed, 61 insertions, 24 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 30cdb095677..b74c95735f9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -46,6 +46,8 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/string.h> +#include <linux/dmi.h> #include <asm/io.h> #define DRVNAME "it87" @@ -236,6 +238,8 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; + /* Values set based on DMI strings */ + u8 skip_pwm; }; /* For each registered chip, we need to keep some data in memory. @@ -273,10 +277,10 @@ struct it87_data { static inline int has_16bit_fans(const struct it87_data *data) { /* IT8705F Datasheet 0.4.1, 3h == Version G. - IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J. These are the first revisions with 16bit tachometer support. */ return (data->type == it87 && data->revision >= 0x03) - || (data->type == it8712 && data->revision >= 0x07) + || (data->type == it8712 && data->revision >= 0x08) || data->type == it8716 || data->type == it8718; } @@ -473,7 +477,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, if (reg & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ if (reg & (8 << nr)) - return sprintf(buf, "2\n"); /* thermistor */ + return sprintf(buf, "4\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, @@ -489,10 +493,15 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, data->sensor &= ~(1 << nr); data->sensor &= ~(8 << nr); - /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ + if (val == 2) { /* backwards compatibility */ + dev_warn(dev, "Sensor type 2 is deprecated, please use 4 " + "instead\n"); + val = 4; + } + /* 3 = thermal diode; 4 = thermistor; 0 = disabled */ if (val == 3) data->sensor |= 1 << nr; - else if (val == 2) + else if (val == 4) data->sensor |= 8 << nr; else if (val != 0) { mutex_unlock(&data->update_lock); @@ -964,6 +973,7 @@ static int __init it87_find(unsigned short *address, { int err = -ENODEV; u16 chip_type; + const char *board_vendor, *board_name; superio_enter(); chip_type = force_id ? force_id : superio_inw(DEVID); @@ -1022,6 +1032,24 @@ static int __init it87_find(unsigned short *address, pr_info("it87: in7 is VCCH (+5V Stand-By)\n"); } + /* Disable specific features based on DMI strings */ + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + if (board_vendor && board_name) { + if (strcmp(board_vendor, "nVIDIA") == 0 + && strcmp(board_name, "FN68PT") == 0) { + /* On the Shuttle SN68PT, FAN_CTL2 is apparently not + connected to a fan, but to something else. One user + has reported instant system power-off when changing + the PWM2 duty cycle, so we disable it. + I use the board name string as the trigger in case + the same board is ever used in other systems. */ + pr_info("it87: Disabling pwm2 due to " + "hardware constraints\n"); + sio_data->skip_pwm = (1 << 1); + } + } + exit: superio_exit(); return err; @@ -1168,25 +1196,33 @@ static int __devinit it87_probe(struct platform_device *pdev) } if (enable_pwm_interface) { - if ((err = device_create_file(dev, - &sensor_dev_attr_pwm1_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm2_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm3_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm1.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm2.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm3.dev_attr)) - || (err = device_create_file(dev, - &dev_attr_pwm1_freq)) - || (err = device_create_file(dev, - &dev_attr_pwm2_freq)) - || (err = device_create_file(dev, - &dev_attr_pwm3_freq))) - goto ERROR4; + if (!(sio_data->skip_pwm & (1 << 0))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm1.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm1_freq))) + goto ERROR4; + } + if (!(sio_data->skip_pwm & (1 << 1))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm2_freq))) + goto ERROR4; + } + if (!(sio_data->skip_pwm & (1 << 2))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm3.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm3_freq))) + goto ERROR4; + } } if (data->type == it8712 || data->type == it8716 @@ -1546,6 +1582,7 @@ static int __init sm_it87_init(void) unsigned short isa_address=0; struct it87_sio_data sio_data; + memset(&sio_data, 0, sizeof(struct it87_sio_data)); err = it87_find(&isa_address, &sio_data); if (err) return err; |