diff options
Diffstat (limited to 'drivers/hwmon/jc42.c')
-rw-r--r-- | drivers/hwmon/jc42.c | 315 |
1 files changed, 139 insertions, 176 deletions
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 6013611e4f2..388f8bcd898 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -65,6 +65,7 @@ static const unsigned short normal_i2c[] = { /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ #define ATMEL_MANID 0x001f /* Atmel */ +#define ATMEL_MANID2 0x1114 /* Atmel */ #define MAX_MANID 0x004d /* Maxim */ #define IDT_MANID 0x00b3 /* IDT */ #define MCP_MANID 0x0054 /* Microchip */ @@ -82,6 +83,9 @@ static const unsigned short normal_i2c[] = { #define AT30TS00_DEVID 0x8201 #define AT30TS00_DEVID_MASK 0xffff +#define AT30TSE004_DEVID 0x2200 +#define AT30TSE004_DEVID_MASK 0xffff + /* IDT */ #define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ #define TS3000B3_DEVID_MASK 0xffff @@ -130,6 +134,9 @@ static const unsigned short normal_i2c[] = { #define STTS2002_DEVID 0x0300 #define STTS2002_DEVID_MASK 0xffff +#define STTS2004_DEVID 0x2201 +#define STTS2004_DEVID_MASK 0xffff + #define STTS3000_DEVID 0x0200 #define STTS3000_DEVID_MASK 0xffff @@ -144,6 +151,7 @@ struct jc42_chips { static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, + { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK }, { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, @@ -158,9 +166,25 @@ static struct jc42_chips jc42_chips[] = { { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, + { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK }, { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; +enum temp_index { + t_input = 0, + t_crit, + t_min, + t_max, + t_num_temp +}; + +static const u8 temp_regs[t_num_temp] = { + [t_input] = JC42_REG_TEMP, + [t_crit] = JC42_REG_TEMP_CRITICAL, + [t_min] = JC42_REG_TEMP_LOWER, + [t_max] = JC42_REG_TEMP_UPPER, +}; + /* Each client has this additional data */ struct jc42_data { struct i2c_client *client; @@ -170,69 +194,7 @@ struct jc42_data { unsigned long last_updated; /* In jiffies */ u16 orig_config; /* original configuration */ u16 config; /* current configuration */ - u16 temp_input; /* Temperatures */ - u16 temp_crit; - u16 temp_min; - u16 temp_max; -}; - -static int jc42_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info); -static int jc42_remove(struct i2c_client *client); - -static struct jc42_data *jc42_update_device(struct device *dev); - -static const struct i2c_device_id jc42_id[] = { - { "jc42", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, jc42_id); - -#ifdef CONFIG_PM - -static int jc42_suspend(struct device *dev) -{ - struct jc42_data *data = dev_get_drvdata(dev); - - data->config |= JC42_CFG_SHUTDOWN; - i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, - data->config); - return 0; -} - -static int jc42_resume(struct device *dev) -{ - struct jc42_data *data = dev_get_drvdata(dev); - - data->config &= ~JC42_CFG_SHUTDOWN; - i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, - data->config); - return 0; -} - -static const struct dev_pm_ops jc42_dev_pm_ops = { - .suspend = jc42_suspend, - .resume = jc42_resume, -}; - -#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops) -#else -#define JC42_DEV_PM_OPS NULL -#endif /* CONFIG_PM */ - -/* This is the driver that will be inserted */ -static struct i2c_driver jc42_driver = { - .class = I2C_CLASS_SPD, - .driver = { - .name = "jc42", - .pm = JC42_DEV_PM_OPS, - }, - .probe = jc42_probe, - .remove = jc42_remove, - .id_table = jc42_id, - .detect = jc42_detect, - .address_list = normal_i2c, + u16 temp[t_num_temp];/* Temperatures */ }; #define JC42_TEMP_MIN_EXTENDED (-40000) @@ -261,79 +223,81 @@ static int jc42_temp_from_reg(s16 reg) return reg * 125 / 2; } -/* sysfs stuff */ - -/* read routines for temperature limits */ -#define show(value) \ -static ssize_t show_##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct jc42_data *data = jc42_update_device(dev); \ - if (IS_ERR(data)) \ - return PTR_ERR(data); \ - return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value)); \ +static struct jc42_data *jc42_update_device(struct device *dev) +{ + struct jc42_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + struct jc42_data *ret = data; + int i, val; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + for (i = 0; i < t_num_temp; i++) { + val = i2c_smbus_read_word_swapped(client, temp_regs[i]); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp[i] = val; + } + data->last_updated = jiffies; + data->valid = true; + } +abort: + mutex_unlock(&data->update_lock); + return ret; } -show(temp_input); -show(temp_crit); -show(temp_min); -show(temp_max); +/* sysfs functions */ -/* read routines for hysteresis values */ -static ssize_t show_temp_crit_hyst(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct jc42_data *data = jc42_update_device(dev); - int temp, hyst; - if (IS_ERR(data)) return PTR_ERR(data); - - temp = jc42_temp_from_reg(data->temp_crit); - hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) - >> JC42_CFG_HYST_SHIFT]; - return sprintf(buf, "%d\n", temp - hyst); + return sprintf(buf, "%d\n", + jc42_temp_from_reg(data->temp[attr->index])); } -static ssize_t show_temp_max_hyst(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_temp_hyst(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct jc42_data *data = jc42_update_device(dev); int temp, hyst; if (IS_ERR(data)) return PTR_ERR(data); - temp = jc42_temp_from_reg(data->temp_max); + temp = jc42_temp_from_reg(data->temp[attr->index]); hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) >> JC42_CFG_HYST_SHIFT]; return sprintf(buf, "%d\n", temp - hyst); } -/* write routines */ -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct jc42_data *data = dev_get_drvdata(dev); \ - int err, ret = count; \ - long val; \ - if (kstrtol(buf, 10, &val) < 0) \ - return -EINVAL; \ - mutex_lock(&data->update_lock); \ - data->value = jc42_temp_to_reg(val, data->extended); \ - err = i2c_smbus_write_word_swapped(data->client, reg, data->value); \ - if (err < 0) \ - ret = err; \ - mutex_unlock(&data->update_lock); \ - return ret; \ -} +static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct jc42_data *data = dev_get_drvdata(dev); + int err, ret = count; + int nr = attr->index; + long val; -set(temp_min, JC42_REG_TEMP_LOWER); -set(temp_max, JC42_REG_TEMP_UPPER); -set(temp_crit, JC42_REG_TEMP_CRITICAL); + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + mutex_lock(&data->update_lock); + data->temp[nr] = jc42_temp_to_reg(val, data->extended); + err = i2c_smbus_write_word_swapped(data->client, temp_regs[nr], + data->temp[nr]); + if (err < 0) + ret = err; + mutex_unlock(&data->update_lock); + return ret; +} /* * JC42.4 compliant chips only support four hysteresis values. @@ -352,7 +316,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev, if (kstrtoul(buf, 10, &val) < 0) return -EINVAL; - diff = jc42_temp_from_reg(data->temp_crit) - val; + diff = jc42_temp_from_reg(data->temp[t_crit]) - val; hyst = 0; if (diff > 0) { if (diff < 2250) @@ -384,25 +348,20 @@ static ssize_t show_alarm(struct device *dev, if (IS_ERR(data)) return PTR_ERR(data); - val = data->temp_input; + val = data->temp[t_input]; if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY)) val = 0; return sprintf(buf, "%u\n", (val >> bit) & 1); } -static DEVICE_ATTR(temp1_input, S_IRUGO, - show_temp_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IRUGO, - show_temp_crit, set_temp_crit); -static DEVICE_ATTR(temp1_min, S_IRUGO, - show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IRUGO, - show_temp_max, set_temp_max); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, t_input); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, set_temp, t_crit); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, set_temp, t_min); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, set_temp, t_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, - show_temp_crit_hyst, set_temp_crit_hyst); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, - show_temp_max_hyst, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_hyst, + set_temp_crit_hyst, t_crit); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_hyst, NULL, t_max); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_CRIT_BIT); @@ -412,12 +371,12 @@ static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_MAX_BIT); static struct attribute *jc42_attributes[] = { - &dev_attr_temp1_input.attr, - &dev_attr_temp1_crit.attr, - &dev_attr_temp1_min.attr, - &dev_attr_temp1_max.attr, - &dev_attr_temp1_crit_hyst.attr, - &dev_attr_temp1_max_hyst.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, @@ -432,12 +391,12 @@ static umode_t jc42_attribute_mode(struct kobject *kobj, unsigned int config = data->config; bool readonly; - if (attr == &dev_attr_temp1_crit.attr) + if (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr) readonly = config & JC42_CFG_TCRIT_LOCK; - else if (attr == &dev_attr_temp1_min.attr || - attr == &dev_attr_temp1_max.attr) + else if (attr == &sensor_dev_attr_temp1_min.dev_attr.attr || + attr == &sensor_dev_attr_temp1_max.dev_attr.attr) readonly = config & JC42_CFG_EVENT_LOCK; - else if (attr == &dev_attr_temp1_crit_hyst.attr) + else if (attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr) readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); else readonly = true; @@ -537,52 +496,56 @@ static int jc42_remove(struct i2c_client *client) return 0; } -static struct jc42_data *jc42_update_device(struct device *dev) +#ifdef CONFIG_PM + +static int jc42_suspend(struct device *dev) { struct jc42_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - struct jc42_data *ret = data; - int val; - mutex_lock(&data->update_lock); + data->config |= JC42_CFG_SHUTDOWN; + i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, + data->config); + return 0; +} - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_input = val; +static int jc42_resume(struct device *dev) +{ + struct jc42_data *data = dev_get_drvdata(dev); - val = i2c_smbus_read_word_swapped(client, - JC42_REG_TEMP_CRITICAL); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_crit = val; + data->config &= ~JC42_CFG_SHUTDOWN; + i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, + data->config); + return 0; +} - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_min = val; +static const struct dev_pm_ops jc42_dev_pm_ops = { + .suspend = jc42_suspend, + .resume = jc42_resume, +}; - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_max = val; +#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops) +#else +#define JC42_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ - data->last_updated = jiffies; - data->valid = true; - } -abort: - mutex_unlock(&data->update_lock); - return ret; -} +static const struct i2c_device_id jc42_id[] = { + { "jc42", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, jc42_id); + +static struct i2c_driver jc42_driver = { + .class = I2C_CLASS_SPD, + .driver = { + .name = "jc42", + .pm = JC42_DEV_PM_OPS, + }, + .probe = jc42_probe, + .remove = jc42_remove, + .id_table = jc42_id, + .detect = jc42_detect, + .address_list = normal_i2c, +}; module_i2c_driver(jc42_driver); |