diff options
Diffstat (limited to 'drivers/hwmon/lis3lv02d.c')
| -rw-r--r-- | drivers/hwmon/lis3lv02d.c | 1000 |
1 files changed, 0 insertions, 1000 deletions
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c deleted file mode 100644 index d805e8e5796..00000000000 --- a/drivers/hwmon/lis3lv02d.c +++ /dev/null @@ -1,1000 +0,0 @@ -/* - * lis3lv02d.c - ST LIS3LV02DL accelerometer driver - * - * Copyright (C) 2007-2008 Yan Burman - * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008-2009 Pavel Machek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/dmi.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/input-polldev.h> -#include <linux/delay.h> -#include <linux/wait.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/freezer.h> -#include <linux/uaccess.h> -#include <linux/miscdevice.h> -#include <linux/pm_runtime.h> -#include <asm/atomic.h> -#include "lis3lv02d.h" - -#define DRIVER_NAME "lis3lv02d" - -/* joystick device poll interval in milliseconds */ -#define MDPS_POLL_INTERVAL 50 -#define MDPS_POLL_MIN 0 -#define MDPS_POLL_MAX 2000 - -#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */ - -#define SELFTEST_OK 0 -#define SELFTEST_FAIL -1 -#define SELFTEST_IRQ -2 - -#define IRQ_LINE0 0 -#define IRQ_LINE1 1 - -/* - * The sensor can also generate interrupts (DRDY) but it's pretty pointless - * because they are generated even if the data do not change. So it's better - * to keep the interrupt for the free-fall event. The values are updated at - * 40Hz (at the lowest frequency), but as it can be pretty time consuming on - * some low processor, we poll the sensor only at 20Hz... enough for the - * joystick. - */ - -#define LIS3_PWRON_DELAY_WAI_12B (5000) -#define LIS3_PWRON_DELAY_WAI_8B (3000) - -/* - * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG - * LIS302D spec says: 18 mG / digit - * LIS3_ACCURACY is used to increase accuracy of the intermediate - * calculation results. - */ -#define LIS3_ACCURACY 1024 -/* Sensitivity values for -2G +2G scale */ -#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024) -#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY) - -#define LIS3_DEFAULT_FUZZ_12B 3 -#define LIS3_DEFAULT_FLAT_12B 3 -#define LIS3_DEFAULT_FUZZ_8B 1 -#define LIS3_DEFAULT_FLAT_8B 1 - -struct lis3lv02d lis3_dev = { - .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait), -}; - -EXPORT_SYMBOL_GPL(lis3_dev); - -/* just like param_set_int() but does sanity-check so that it won't point - * over the axis array size - */ -static int param_set_axis(const char *val, const struct kernel_param *kp) -{ - int ret = param_set_int(val, kp); - if (!ret) { - int val = *(int *)kp->arg; - if (val < 0) - val = -val; - if (!val || val > 3) - return -EINVAL; - } - return ret; -} - -static struct kernel_param_ops param_ops_axis = { - .set = param_set_axis, - .get = param_get_int, -}; - -module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644); -MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions"); - -static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg) -{ - s8 lo; - if (lis3->read(lis3, reg, &lo) < 0) - return 0; - - return lo; -} - -static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg) -{ - u8 lo, hi; - - lis3->read(lis3, reg - 1, &lo); - lis3->read(lis3, reg, &hi); - /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ - return (s16)((hi << 8) | lo); -} - -/** - * lis3lv02d_get_axis - For the given axis, give the value converted - * @axis: 1,2,3 - can also be negative - * @hw_values: raw values returned by the hardware - * - * Returns the converted value. - */ -static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) -{ - if (axis > 0) - return hw_values[axis - 1]; - else - return -hw_values[-axis - 1]; -} - -/** - * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer - * @lis3: pointer to the device struct - * @x: where to store the X axis value - * @y: where to store the Y axis value - * @z: where to store the Z axis value - * - * Note that 40Hz input device can eat up about 10% CPU at 800MHZ - */ -static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) -{ - int position[3]; - int i; - - if (lis3->blkread) { - if (lis3_dev.whoami == WAI_12B) { - u16 data[3]; - lis3->blkread(lis3, OUTX_L, 6, (u8 *)data); - for (i = 0; i < 3; i++) - position[i] = (s16)le16_to_cpu(data[i]); - } else { - u8 data[5]; - /* Data: x, dummy, y, dummy, z */ - lis3->blkread(lis3, OUTX, 5, data); - for (i = 0; i < 3; i++) - position[i] = (s8)data[i * 2]; - } - } else { - position[0] = lis3->read_data(lis3, OUTX); - position[1] = lis3->read_data(lis3, OUTY); - position[2] = lis3->read_data(lis3, OUTZ); - } - - for (i = 0; i < 3; i++) - position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY; - - *x = lis3lv02d_get_axis(lis3->ac.x, position); - *y = lis3lv02d_get_axis(lis3->ac.y, position); - *z = lis3lv02d_get_axis(lis3->ac.z, position); -} - -/* conversion btw sampling rate and the register values */ -static int lis3_12_rates[4] = {40, 160, 640, 2560}; -static int lis3_8_rates[2] = {100, 400}; -static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000}; - -/* ODR is Output Data Rate */ -static int lis3lv02d_get_odr(void) -{ - u8 ctrl; - int shift; - - lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - ctrl &= lis3_dev.odr_mask; - shift = ffs(lis3_dev.odr_mask) - 1; - return lis3_dev.odrs[(ctrl >> shift)]; -} - -static int lis3lv02d_set_odr(int rate) -{ - u8 ctrl; - int i, len, shift; - - if (!rate) - return -EINVAL; - - lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - ctrl &= ~lis3_dev.odr_mask; - len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */ - shift = ffs(lis3_dev.odr_mask) - 1; - - for (i = 0; i < len; i++) - if (lis3_dev.odrs[i] == rate) { - lis3_dev.write(&lis3_dev, CTRL_REG1, - ctrl | (i << shift)); - return 0; - } - return -EINVAL; -} - -static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3]) -{ - u8 ctlreg, reg; - s16 x, y, z; - u8 selftest; - int ret; - u8 ctrl_reg_data; - unsigned char irq_cfg; - - mutex_lock(&lis3->mutex); - - irq_cfg = lis3->irq_cfg; - if (lis3_dev.whoami == WAI_8B) { - lis3->data_ready_count[IRQ_LINE0] = 0; - lis3->data_ready_count[IRQ_LINE1] = 0; - - /* Change interrupt cfg to data ready for selftest */ - atomic_inc(&lis3_dev.wake_thread); - lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY; - lis3->read(lis3, CTRL_REG3, &ctrl_reg_data); - lis3->write(lis3, CTRL_REG3, (ctrl_reg_data & - ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) | - (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY)); - } - - if (lis3_dev.whoami == WAI_3DC) { - ctlreg = CTRL_REG4; - selftest = CTRL4_ST0; - } else { - ctlreg = CTRL_REG1; - if (lis3_dev.whoami == WAI_12B) - selftest = CTRL1_ST; - else - selftest = CTRL1_STP; - } - - lis3->read(lis3, ctlreg, ®); - lis3->write(lis3, ctlreg, (reg | selftest)); - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - /* Read directly to avoid axis remap */ - x = lis3->read_data(lis3, OUTX); - y = lis3->read_data(lis3, OUTY); - z = lis3->read_data(lis3, OUTZ); - - /* back to normal settings */ - lis3->write(lis3, ctlreg, reg); - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - results[0] = x - lis3->read_data(lis3, OUTX); - results[1] = y - lis3->read_data(lis3, OUTY); - results[2] = z - lis3->read_data(lis3, OUTZ); - - ret = 0; - - if (lis3_dev.whoami == WAI_8B) { - /* Restore original interrupt configuration */ - atomic_dec(&lis3_dev.wake_thread); - lis3->write(lis3, CTRL_REG3, ctrl_reg_data); - lis3->irq_cfg = irq_cfg; - - if ((irq_cfg & LIS3_IRQ1_MASK) && - lis3->data_ready_count[IRQ_LINE0] < 2) { - ret = SELFTEST_IRQ; - goto fail; - } - - if ((irq_cfg & LIS3_IRQ2_MASK) && - lis3->data_ready_count[IRQ_LINE1] < 2) { - ret = SELFTEST_IRQ; - goto fail; - } - } - - if (lis3->pdata) { - int i; - for (i = 0; i < 3; i++) { - /* Check against selftest acceptance limits */ - if ((results[i] < lis3->pdata->st_min_limits[i]) || - (results[i] > lis3->pdata->st_max_limits[i])) { - ret = SELFTEST_FAIL; - goto fail; - } - } - } - - /* test passed */ -fail: - mutex_unlock(&lis3->mutex); - return ret; -} - -/* - * Order of registers in the list affects to order of the restore process. - * Perhaps it is a good idea to set interrupt enable register as a last one - * after all other configurations - */ -static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1, - FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2, - CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ, - CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW, - CTRL_REG1, CTRL_REG2, CTRL_REG3}; - -static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H, - FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H, - DD_THSE_L, DD_THSE_H, - CTRL_REG1, CTRL_REG3, CTRL_REG2}; - -static inline void lis3_context_save(struct lis3lv02d *lis3) -{ - int i; - for (i = 0; i < lis3->regs_size; i++) - lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]); - lis3->regs_stored = true; -} - -static inline void lis3_context_restore(struct lis3lv02d *lis3) -{ - int i; - if (lis3->regs_stored) - for (i = 0; i < lis3->regs_size; i++) - lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]); -} - -void lis3lv02d_poweroff(struct lis3lv02d *lis3) -{ - if (lis3->reg_ctrl) - lis3_context_save(lis3); - /* disable X,Y,Z axis and power down */ - lis3->write(lis3, CTRL_REG1, 0x00); - if (lis3->reg_ctrl) - lis3->reg_ctrl(lis3, LIS3_REG_OFF); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); - -void lis3lv02d_poweron(struct lis3lv02d *lis3) -{ - u8 reg; - - lis3->init(lis3); - - /* - * Common configuration - * BDU: (12 bits sensors only) LSB and MSB values are not updated until - * both have been read. So the value read will always be correct. - * Set BOOT bit to refresh factory tuning values. - */ - lis3->read(lis3, CTRL_REG2, ®); - if (lis3->whoami == WAI_12B) - reg |= CTRL2_BDU | CTRL2_BOOT; - else - reg |= CTRL2_BOOT_8B; - lis3->write(lis3, CTRL_REG2, reg); - - /* LIS3 power on delay is quite long */ - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - if (lis3->reg_ctrl) - lis3_context_restore(lis3); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweron); - - -static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) -{ - int x, y, z; - - mutex_lock(&lis3_dev.mutex); - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - input_report_abs(pidev->input, ABS_X, x); - input_report_abs(pidev->input, ABS_Y, y); - input_report_abs(pidev->input, ABS_Z, z); - input_sync(pidev->input); - mutex_unlock(&lis3_dev.mutex); -} - -static void lis3lv02d_joystick_open(struct input_polled_dev *pidev) -{ - if (lis3_dev.pm_dev) - pm_runtime_get_sync(lis3_dev.pm_dev); - - if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev) - atomic_set(&lis3_dev.wake_thread, 1); - /* - * Update coordinates for the case where poll interval is 0 and - * the chip in running purely under interrupt control - */ - lis3lv02d_joystick_poll(pidev); -} - -static void lis3lv02d_joystick_close(struct input_polled_dev *pidev) -{ - atomic_set(&lis3_dev.wake_thread, 0); - if (lis3_dev.pm_dev) - pm_runtime_put(lis3_dev.pm_dev); -} - -static irqreturn_t lis302dl_interrupt(int irq, void *dummy) -{ - if (!test_bit(0, &lis3_dev.misc_opened)) - goto out; - - /* - * Be careful: on some HP laptops the bios force DD when on battery and - * the lid is closed. This leads to interrupts as soon as a little move - * is done. - */ - atomic_inc(&lis3_dev.count); - - wake_up_interruptible(&lis3_dev.misc_wait); - kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN); -out: - if (atomic_read(&lis3_dev.wake_thread)) - return IRQ_WAKE_THREAD; - return IRQ_HANDLED; -} - -static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3) -{ - struct input_dev *dev = lis3->idev->input; - u8 click_src; - - mutex_lock(&lis3->mutex); - lis3->read(lis3, CLICK_SRC, &click_src); - - if (click_src & CLICK_SINGLE_X) { - input_report_key(dev, lis3->mapped_btns[0], 1); - input_report_key(dev, lis3->mapped_btns[0], 0); - } - - if (click_src & CLICK_SINGLE_Y) { - input_report_key(dev, lis3->mapped_btns[1], 1); - input_report_key(dev, lis3->mapped_btns[1], 0); - } - - if (click_src & CLICK_SINGLE_Z) { - input_report_key(dev, lis3->mapped_btns[2], 1); - input_report_key(dev, lis3->mapped_btns[2], 0); - } - input_sync(dev); - mutex_unlock(&lis3->mutex); -} - -static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index) -{ - int dummy; - - /* Dummy read to ack interrupt */ - lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy); - lis3->data_ready_count[index]++; -} - -static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data) -{ - struct lis3lv02d *lis3 = data; - u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK; - - if (irq_cfg == LIS3_IRQ1_CLICK) - lis302dl_interrupt_handle_click(lis3); - else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY)) - lis302dl_data_ready(lis3, IRQ_LINE0); - else - lis3lv02d_joystick_poll(lis3->idev); - - return IRQ_HANDLED; -} - -static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data) -{ - struct lis3lv02d *lis3 = data; - u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK; - - if (irq_cfg == LIS3_IRQ2_CLICK) - lis302dl_interrupt_handle_click(lis3); - else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY)) - lis302dl_data_ready(lis3, IRQ_LINE1); - else - lis3lv02d_joystick_poll(lis3->idev); - - return IRQ_HANDLED; -} - -static int lis3lv02d_misc_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &lis3_dev.misc_opened)) - return -EBUSY; /* already open */ - - if (lis3_dev.pm_dev) - pm_runtime_get_sync(lis3_dev.pm_dev); - - atomic_set(&lis3_dev.count, 0); - return 0; -} - -static int lis3lv02d_misc_release(struct inode *inode, struct file *file) -{ - fasync_helper(-1, file, 0, &lis3_dev.async_queue); - clear_bit(0, &lis3_dev.misc_opened); /* release the device */ - if (lis3_dev.pm_dev) - pm_runtime_put(lis3_dev.pm_dev); - return 0; -} - -static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, - size_t count, loff_t *pos) -{ - DECLARE_WAITQUEUE(wait, current); - u32 data; - unsigned char byte_data; - ssize_t retval = 1; - - if (count < 1) - return -EINVAL; - - add_wait_queue(&lis3_dev.misc_wait, &wait); - while (true) { - set_current_state(TASK_INTERRUPTIBLE); - data = atomic_xchg(&lis3_dev.count, 0); - if (data) - break; - - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - goto out; - } - - schedule(); - } - - if (data < 255) - byte_data = data; - else - byte_data = 255; - - /* make sure we are not going into copy_to_user() with - * TASK_INTERRUPTIBLE state */ - set_current_state(TASK_RUNNING); - if (copy_to_user(buf, &byte_data, sizeof(byte_data))) - retval = -EFAULT; - -out: - __set_current_state(TASK_RUNNING); - remove_wait_queue(&lis3_dev.misc_wait, &wait); - - return retval; -} - -static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &lis3_dev.misc_wait, wait); - if (atomic_read(&lis3_dev.count)) - return POLLIN | POLLRDNORM; - return 0; -} - -static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) -{ - return fasync_helper(fd, file, on, &lis3_dev.async_queue); -} - -static const struct file_operations lis3lv02d_misc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = lis3lv02d_misc_read, - .open = lis3lv02d_misc_open, - .release = lis3lv02d_misc_release, - .poll = lis3lv02d_misc_poll, - .fasync = lis3lv02d_misc_fasync, -}; - -static struct miscdevice lis3lv02d_misc_device = { - .minor = MISC_DYNAMIC_MINOR, - .name = "freefall", - .fops = &lis3lv02d_misc_fops, -}; - -int lis3lv02d_joystick_enable(void) -{ - struct input_dev *input_dev; - int err; - int max_val, fuzz, flat; - int btns[] = {BTN_X, BTN_Y, BTN_Z}; - - if (lis3_dev.idev) - return -EINVAL; - - lis3_dev.idev = input_allocate_polled_device(); - if (!lis3_dev.idev) - return -ENOMEM; - - lis3_dev.idev->poll = lis3lv02d_joystick_poll; - lis3_dev.idev->open = lis3lv02d_joystick_open; - lis3_dev.idev->close = lis3lv02d_joystick_close; - lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; - lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN; - lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX; - input_dev = lis3_dev.idev->input; - - input_dev->name = "ST LIS3LV02DL Accelerometer"; - input_dev->phys = DRIVER_NAME "/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0; - input_dev->dev.parent = &lis3_dev.pdev->dev; - - set_bit(EV_ABS, input_dev->evbit); - max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY; - if (lis3_dev.whoami == WAI_12B) { - fuzz = LIS3_DEFAULT_FUZZ_12B; - flat = LIS3_DEFAULT_FLAT_12B; - } else { - fuzz = LIS3_DEFAULT_FUZZ_8B; - flat = LIS3_DEFAULT_FLAT_8B; - } - fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY; - flat = (flat * lis3_dev.scale) / LIS3_ACCURACY; - - input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat); - input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat); - input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat); - - lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns); - lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns); - lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns); - - err = input_register_polled_device(lis3_dev.idev); - if (err) { - input_free_polled_device(lis3_dev.idev); - lis3_dev.idev = NULL; - } - - return err; -} -EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable); - -void lis3lv02d_joystick_disable(void) -{ - if (lis3_dev.irq) - free_irq(lis3_dev.irq, &lis3_dev); - if (lis3_dev.pdata && lis3_dev.pdata->irq2) - free_irq(lis3_dev.pdata->irq2, &lis3_dev); - - if (!lis3_dev.idev) - return; - - if (lis3_dev.irq) - misc_deregister(&lis3lv02d_misc_device); - input_unregister_polled_device(lis3_dev.idev); - input_free_polled_device(lis3_dev.idev); - lis3_dev.idev = NULL; -} -EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); - -/* Sysfs stuff */ -static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3) -{ - /* - * SYSFS functions are fast visitors so put-call - * immediately after the get-call. However, keep - * chip running for a while and schedule delayed - * suspend. This way periodic sysfs calls doesn't - * suffer from relatively long power up time. - */ - - if (lis3->pm_dev) { - pm_runtime_get_sync(lis3->pm_dev); - pm_runtime_put_noidle(lis3->pm_dev); - pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY); - } -} - -static ssize_t lis3lv02d_selftest_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - s16 values[3]; - - static const char ok[] = "OK"; - static const char fail[] = "FAIL"; - static const char irq[] = "FAIL_IRQ"; - const char *res; - - lis3lv02d_sysfs_poweron(&lis3_dev); - switch (lis3lv02d_selftest(&lis3_dev, values)) { - case SELFTEST_FAIL: - res = fail; - break; - case SELFTEST_IRQ: - res = irq; - break; - case SELFTEST_OK: - default: - res = ok; - break; - } - return sprintf(buf, "%s %d %d %d\n", res, - values[0], values[1], values[2]); -} - -static ssize_t lis3lv02d_position_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int x, y, z; - - lis3lv02d_sysfs_poweron(&lis3_dev); - mutex_lock(&lis3_dev.mutex); - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - mutex_unlock(&lis3_dev.mutex); - return sprintf(buf, "(%d,%d,%d)\n", x, y, z); -} - -static ssize_t lis3lv02d_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - lis3lv02d_sysfs_poweron(&lis3_dev); - return sprintf(buf, "%d\n", lis3lv02d_get_odr()); -} - -static ssize_t lis3lv02d_rate_set(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) -{ - unsigned long rate; - - if (strict_strtoul(buf, 0, &rate)) - return -EINVAL; - - lis3lv02d_sysfs_poweron(&lis3_dev); - if (lis3lv02d_set_odr(rate)) - return -EINVAL; - - return count; -} - -static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL); -static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); -static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show, - lis3lv02d_rate_set); - -static struct attribute *lis3lv02d_attributes[] = { - &dev_attr_selftest.attr, - &dev_attr_position.attr, - &dev_attr_rate.attr, - NULL -}; - -static struct attribute_group lis3lv02d_attribute_group = { - .attrs = lis3lv02d_attributes -}; - - -static int lis3lv02d_add_fs(struct lis3lv02d *lis3) -{ - lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); - if (IS_ERR(lis3->pdev)) - return PTR_ERR(lis3->pdev); - - return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); -} - -int lis3lv02d_remove_fs(struct lis3lv02d *lis3) -{ - sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); - platform_device_unregister(lis3->pdev); - if (lis3->pm_dev) { - /* Barrier after the sysfs remove */ - pm_runtime_barrier(lis3->pm_dev); - - /* SYSFS may have left chip running. Turn off if necessary */ - if (!pm_runtime_suspended(lis3->pm_dev)) - lis3lv02d_poweroff(&lis3_dev); - - pm_runtime_disable(lis3->pm_dev); - pm_runtime_set_suspended(lis3->pm_dev); - } - kfree(lis3->reg_cache); - return 0; -} -EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); - -static void lis3lv02d_8b_configure(struct lis3lv02d *dev, - struct lis3lv02d_platform_data *p) -{ - int err; - int ctrl2 = p->hipass_ctrl; - - if (p->click_flags) { - dev->write(dev, CLICK_CFG, p->click_flags); - dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); - dev->write(dev, CLICK_LATENCY, p->click_latency); - dev->write(dev, CLICK_WINDOW, p->click_window); - dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); - dev->write(dev, CLICK_THSY_X, - (p->click_thresh_x & 0xf) | - (p->click_thresh_y << 4)); - - if (dev->idev) { - struct input_dev *input_dev = lis3_dev.idev->input; - input_set_capability(input_dev, EV_KEY, BTN_X); - input_set_capability(input_dev, EV_KEY, BTN_Y); - input_set_capability(input_dev, EV_KEY, BTN_Z); - } - } - - if (p->wakeup_flags) { - dev->write(dev, FF_WU_CFG_1, p->wakeup_flags); - dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f); - /* pdata value + 1 to keep this backward compatible*/ - dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1); - ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/ - } - - if (p->wakeup_flags2) { - dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2); - dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f); - /* pdata value + 1 to keep this backward compatible*/ - dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1); - ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/ - } - /* Configure hipass filters */ - dev->write(dev, CTRL_REG2, ctrl2); - - if (p->irq2) { - err = request_threaded_irq(p->irq2, - NULL, - lis302dl_interrupt_thread2_8b, - IRQF_TRIGGER_RISING | IRQF_ONESHOT | - (p->irq_flags2 & IRQF_TRIGGER_MASK), - DRIVER_NAME, &lis3_dev); - if (err < 0) - pr_err("No second IRQ. Limited functionality\n"); - } -} - -/* - * Initialise the accelerometer and the various subsystems. - * Should be rather independent of the bus system. - */ -int lis3lv02d_init_device(struct lis3lv02d *dev) -{ - int err; - irq_handler_t thread_fn; - int irq_flags = 0; - - dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I); - - switch (dev->whoami) { - case WAI_12B: - pr_info("12 bits sensor found\n"); - dev->read_data = lis3lv02d_read_12; - dev->mdps_max_val = 2048; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B; - dev->odrs = lis3_12_rates; - dev->odr_mask = CTRL1_DF0 | CTRL1_DF1; - dev->scale = LIS3_SENSITIVITY_12B; - dev->regs = lis3_wai12_regs; - dev->regs_size = ARRAY_SIZE(lis3_wai12_regs); - break; - case WAI_8B: - pr_info("8 bits sensor found\n"); - dev->read_data = lis3lv02d_read_8; - dev->mdps_max_val = 128; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; - dev->odrs = lis3_8_rates; - dev->odr_mask = CTRL1_DR; - dev->scale = LIS3_SENSITIVITY_8B; - dev->regs = lis3_wai8_regs; - dev->regs_size = ARRAY_SIZE(lis3_wai8_regs); - break; - case WAI_3DC: - pr_info("8 bits 3DC sensor found\n"); - dev->read_data = lis3lv02d_read_8; - dev->mdps_max_val = 128; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; - dev->odrs = lis3_3dc_rates; - dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3; - dev->scale = LIS3_SENSITIVITY_8B; - break; - default: - pr_err("unknown sensor type 0x%X\n", dev->whoami); - return -EINVAL; - } - - dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs), - sizeof(lis3_wai12_regs)), GFP_KERNEL); - - if (dev->reg_cache == NULL) { - printk(KERN_ERR DRIVER_NAME "out of memory\n"); - return -ENOMEM; - } - - mutex_init(&dev->mutex); - atomic_set(&dev->wake_thread, 0); - - lis3lv02d_add_fs(dev); - lis3lv02d_poweron(dev); - - if (dev->pm_dev) { - pm_runtime_set_active(dev->pm_dev); - pm_runtime_enable(dev->pm_dev); - } - - if (lis3lv02d_joystick_enable()) - pr_err("joystick initialization failed\n"); - - /* passing in platform specific data is purely optional and only - * used by the SPI transport layer at the moment */ - if (dev->pdata) { - struct lis3lv02d_platform_data *p = dev->pdata; - - if (dev->whoami == WAI_8B) - lis3lv02d_8b_configure(dev, p); - - irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK; - - dev->irq_cfg = p->irq_cfg; - if (p->irq_cfg) - dev->write(dev, CTRL_REG3, p->irq_cfg); - - if (p->default_rate) - lis3lv02d_set_odr(p->default_rate); - } - - /* bail if we did not get an IRQ from the bus layer */ - if (!dev->irq) { - pr_debug("No IRQ. Disabling /dev/freefall\n"); - goto out; - } - - /* - * The sensor can generate interrupts for free-fall and direction - * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep - * the things simple and _fast_ we activate it only for free-fall, so - * no need to read register (very slow with ACPI). For the same reason, - * we forbid shared interrupts. - * - * IRQF_TRIGGER_RISING seems pointless on HP laptops because the - * io-apic is not configurable (and generates a warning) but I keep it - * in case of support for other hardware. - */ - if (dev->pdata && dev->whoami == WAI_8B) - thread_fn = lis302dl_interrupt_thread1_8b; - else - thread_fn = NULL; - - err = request_threaded_irq(dev->irq, lis302dl_interrupt, - thread_fn, - IRQF_TRIGGER_RISING | IRQF_ONESHOT | - irq_flags, - DRIVER_NAME, &lis3_dev); - - if (err < 0) { - pr_err("Cannot get IRQ\n"); - goto out; - } - - if (misc_register(&lis3lv02d_misc_device)) - pr_err("misc_register failed\n"); -out: - return 0; -} -EXPORT_SYMBOL_GPL(lis3lv02d_init_device); - -MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); -MODULE_LICENSE("GPL"); |