summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/lm80.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/lm80.c')
-rw-r--r--drivers/hwmon/lm80.c247
1 files changed, 178 insertions, 69 deletions
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 0891b38ffec..e2c43e1774b 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -1,8 +1,8 @@
/*
* lm80.c - From lm_sensors, Linux kernel modules for hardware
- * monitoring
+ * monitoring
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- * and Philip Edelbrock <phil@netroedge.com>
+ * and Philip Edelbrock <phil@netroedge.com>
*
* Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org>
*
@@ -60,11 +60,17 @@ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
#define LM80_REG_FANDIV 0x05
#define LM80_REG_RES 0x06
+#define LM96080_REG_CONV_RATE 0x07
+#define LM96080_REG_MAN_ID 0x3e
+#define LM96080_REG_DEV_ID 0x3f
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
#define IN_TO_REG(val) (SENSORS_LIMIT(((val) + 5) / 10, 0, 255))
#define IN_FROM_REG(val) ((val) * 10)
@@ -108,6 +114,7 @@ static inline long TEMP_FROM_REG(u16 temp)
struct lm80_data {
struct device *hwmon_dev;
struct mutex update_lock;
+ char error; /* !=0 if error occurred during last update */
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -144,6 +151,7 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
static const struct i2c_device_id lm80_id[] = {
{ "lm80", 0 },
+ { "lm96080", 1 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm80_id);
@@ -170,6 +178,8 @@ static ssize_t show_in_##suffix(struct device *dev, \
{ \
int nr = to_sensor_dev_attr(attr)->index; \
struct lm80_data *data = lm80_update_device(dev); \
+ if (IS_ERR(data)) \
+ return PTR_ERR(data); \
return sprintf(buf, "%d\n", IN_FROM_REG(data->value[nr])); \
}
show_in(min, in_min)
@@ -183,7 +193,10 @@ static ssize_t set_in_##suffix(struct device *dev, \
int nr = to_sensor_dev_attr(attr)->index; \
struct i2c_client *client = to_i2c_client(dev); \
struct lm80_data *data = i2c_get_clientdata(client); \
- long val = simple_strtol(buf, NULL, 10); \
+ long val; \
+ int err = kstrtol(buf, 10, &val); \
+ if (err < 0) \
+ return err; \
\
mutex_lock(&data->update_lock);\
data->value[nr] = IN_TO_REG(val); \
@@ -200,6 +213,8 @@ static ssize_t show_fan_##suffix(struct device *dev, \
{ \
int nr = to_sensor_dev_attr(attr)->index; \
struct lm80_data *data = lm80_update_device(dev); \
+ if (IS_ERR(data)) \
+ return PTR_ERR(data); \
return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[nr], \
DIV_FROM_REG(data->fan_div[nr]))); \
}
@@ -211,6 +226,8 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
{
int nr = to_sensor_dev_attr(attr)->index;
struct lm80_data *data = lm80_update_device(dev);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
}
@@ -220,7 +237,10 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm80_data *data = i2c_get_clientdata(client);
- long val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
@@ -229,18 +249,23 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
return count;
}
-/* Note: we save and restore the fan minimum here, because its value is
- determined in part by the fan divisor. This follows the principle of
- least surprise; the user doesn't expect the fan minimum to change just
- because the divisor changed. */
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor. This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm80_data *data = i2c_get_clientdata(client);
- unsigned long min, val = simple_strtoul(buf, NULL, 10);
+ unsigned long min, val;
u8 reg;
+ int err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
/* Save fan_min */
mutex_lock(&data->update_lock);
@@ -283,6 +308,8 @@ static ssize_t show_temp_input1(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lm80_data *data = lm80_update_device(dev);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp));
}
@@ -291,6 +318,8 @@ static ssize_t show_temp_##suffix(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct lm80_data *data = lm80_update_device(dev); \
+ if (IS_ERR(data)) \
+ return PTR_ERR(data); \
return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \
}
show_temp(hot_max, temp_hot_max);
@@ -304,7 +333,10 @@ static ssize_t set_temp_##suffix(struct device *dev, \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct lm80_data *data = i2c_get_clientdata(client); \
- long val = simple_strtoul(buf, NULL, 10); \
+ long val; \
+ int err = kstrtol(buf, 10, &val); \
+ if (err < 0) \
+ return err; \
\
mutex_lock(&data->update_lock); \
data->value = TEMP_LIMIT_TO_REG(val); \
@@ -321,6 +353,8 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct lm80_data *data = lm80_update_device(dev);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
return sprintf(buf, "%u\n", data->alarms);
}
@@ -329,6 +363,8 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct lm80_data *data = lm80_update_device(dev);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
@@ -459,23 +495,44 @@ static const struct attribute_group lm80_group = {
static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- int i, cur;
+ int i, cur, man_id, dev_id;
+ const char *name = NULL;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now, we do the remaining detection. It is lousy. */
- if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0)
+ /* First check for unused bits, common to both chip types */
+ if ((lm80_read_value(client, LM80_REG_ALARM2) & 0xc0)
+ || (lm80_read_value(client, LM80_REG_CONFIG) & 0x80))
return -ENODEV;
- for (i = 0x2a; i <= 0x3d; i++) {
- cur = i2c_smbus_read_byte_data(client, i);
- if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur)
- || (i2c_smbus_read_byte_data(client, i + 0x80) != cur)
- || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur))
+
+ /*
+ * The LM96080 has manufacturer and stepping/die rev registers so we
+ * can just check that. The LM80 does not have such registers so we
+ * have to use a more expensive trick.
+ */
+ man_id = lm80_read_value(client, LM96080_REG_MAN_ID);
+ dev_id = lm80_read_value(client, LM96080_REG_DEV_ID);
+ if (man_id == 0x01 && dev_id == 0x08) {
+ /* Check more unused bits for confirmation */
+ if (lm80_read_value(client, LM96080_REG_CONV_RATE) & 0xfe)
return -ENODEV;
+
+ name = "lm96080";
+ } else {
+ /* Check 6-bit addressing */
+ for (i = 0x2a; i <= 0x3d; i++) {
+ cur = i2c_smbus_read_byte_data(client, i);
+ if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur)
+ || (i2c_smbus_read_byte_data(client, i + 0x80) != cur)
+ || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur))
+ return -ENODEV;
+ }
+
+ name = "lm80";
}
- strlcpy(info->type, "lm80", I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
@@ -547,9 +604,11 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value)
/* Called when we have found a new LM80. */
static void lm80_init_client(struct i2c_client *client)
{
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others. This makes most other
- initializations unnecessary */
+ /*
+ * Reset all except Watchdog values and last conversion values
+ * This sets fan-divs to 2, among others. This makes most other
+ * initializations unnecessary
+ */
lm80_write_value(client, LM80_REG_CONFIG, 0x80);
/* Set 11-bit temperature resolution */
lm80_write_value(client, LM80_REG_RES, 0x08);
@@ -563,66 +622,116 @@ static struct lm80_data *lm80_update_device(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct lm80_data *data = i2c_get_clientdata(client);
int i;
+ int rv;
+ int prev_rv;
+ struct lm80_data *ret = data;
mutex_lock(&data->update_lock);
+ if (data->error)
+ lm80_init_client(client);
+
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting lm80 update\n");
for (i = 0; i <= 6; i++) {
- data->in[i] =
- lm80_read_value(client, LM80_REG_IN(i));
- data->in_min[i] =
- lm80_read_value(client, LM80_REG_IN_MIN(i));
- data->in_max[i] =
- lm80_read_value(client, LM80_REG_IN_MAX(i));
+ rv = lm80_read_value(client, LM80_REG_IN(i));
+ if (rv < 0)
+ goto abort;
+ data->in[i] = rv;
+
+ rv = lm80_read_value(client, LM80_REG_IN_MIN(i));
+ if (rv < 0)
+ goto abort;
+ data->in_min[i] = rv;
+
+ rv = lm80_read_value(client, LM80_REG_IN_MAX(i));
+ if (rv < 0)
+ goto abort;
+ data->in_max[i] = rv;
}
- data->fan[0] = lm80_read_value(client, LM80_REG_FAN1);
- data->fan_min[0] =
- lm80_read_value(client, LM80_REG_FAN_MIN(1));
- data->fan[1] = lm80_read_value(client, LM80_REG_FAN2);
- data->fan_min[1] =
- lm80_read_value(client, LM80_REG_FAN_MIN(2));
-
- data->temp =
- (lm80_read_value(client, LM80_REG_TEMP) << 8) |
- (lm80_read_value(client, LM80_REG_RES) & 0xf0);
- data->temp_os_max =
- lm80_read_value(client, LM80_REG_TEMP_OS_MAX);
- data->temp_os_hyst =
- lm80_read_value(client, LM80_REG_TEMP_OS_HYST);
- data->temp_hot_max =
- lm80_read_value(client, LM80_REG_TEMP_HOT_MAX);
- data->temp_hot_hyst =
- lm80_read_value(client, LM80_REG_TEMP_HOT_HYST);
-
- i = lm80_read_value(client, LM80_REG_FANDIV);
- data->fan_div[0] = (i >> 2) & 0x03;
- data->fan_div[1] = (i >> 4) & 0x03;
- data->alarms = lm80_read_value(client, LM80_REG_ALARM1) +
- (lm80_read_value(client, LM80_REG_ALARM2) << 8);
+
+ rv = lm80_read_value(client, LM80_REG_FAN1);
+ if (rv < 0)
+ goto abort;
+ data->fan[0] = rv;
+
+ rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+ if (rv < 0)
+ goto abort;
+ data->fan_min[0] = rv;
+
+ rv = lm80_read_value(client, LM80_REG_FAN2);
+ if (rv < 0)
+ goto abort;
+ data->fan[1] = rv;
+
+ rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
+ if (rv < 0)
+ goto abort;
+ data->fan_min[1] = rv;
+
+ prev_rv = rv = lm80_read_value(client, LM80_REG_TEMP);
+ if (rv < 0)
+ goto abort;
+ rv = lm80_read_value(client, LM80_REG_RES);
+ if (rv < 0)
+ goto abort;
+ data->temp = (prev_rv << 8) | (rv & 0xf0);
+
+ rv = lm80_read_value(client, LM80_REG_TEMP_OS_MAX);
+ if (rv < 0)
+ goto abort;
+ data->temp_os_max = rv;
+
+ rv = lm80_read_value(client, LM80_REG_TEMP_OS_HYST);
+ if (rv < 0)
+ goto abort;
+ data->temp_os_hyst = rv;
+
+ rv = lm80_read_value(client, LM80_REG_TEMP_HOT_MAX);
+ if (rv < 0)
+ goto abort;
+ data->temp_hot_max = rv;
+
+ rv = lm80_read_value(client, LM80_REG_TEMP_HOT_HYST);
+ if (rv < 0)
+ goto abort;
+ data->temp_hot_hyst = rv;
+
+ rv = lm80_read_value(client, LM80_REG_FANDIV);
+ if (rv < 0)
+ goto abort;
+ data->fan_div[0] = (rv >> 2) & 0x03;
+ data->fan_div[1] = (rv >> 4) & 0x03;
+
+ prev_rv = rv = lm80_read_value(client, LM80_REG_ALARM1);
+ if (rv < 0)
+ goto abort;
+ rv = lm80_read_value(client, LM80_REG_ALARM2);
+ if (rv < 0)
+ goto abort;
+ data->alarms = prev_rv + (rv << 8);
+
data->last_updated = jiffies;
data->valid = 1;
+ data->error = 0;
}
+ goto done;
+
+abort:
+ ret = ERR_PTR(rv);
+ data->valid = 0;
+ data->error = 1;
+done:
mutex_unlock(&data->update_lock);
- return data;
+ return ret;
}
-static int __init sensors_lm80_init(void)
-{
- return i2c_add_driver(&lm80_driver);
-}
-
-static void __exit sensors_lm80_exit(void)
-{
- i2c_del_driver(&lm80_driver);
-}
+module_i2c_driver(lm80_driver);
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("LM80 driver");
MODULE_LICENSE("GPL");
-
-module_init(sensors_lm80_init);
-module_exit(sensors_lm80_exit);