1 files changed, 87 insertions, 54 deletions

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37..cf47e6e476e 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 enum chips {
 	any_chip, lm85b, lm85c,
 	adm1027, adt7463, adt7468,
-	emc6d100, emc6d102
+	emc6d100, emc6d102, emc6d103, emc6d103s
 };
 
 /* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
 #define	LM85_VERSTEP_EMC6D100_A0        0x60
 #define	LM85_VERSTEP_EMC6D100_A1        0x61
 #define	LM85_VERSTEP_EMC6D102		0x65
+#define	LM85_VERSTEP_EMC6D103_A0	0x68
+#define	LM85_VERSTEP_EMC6D103_A1	0x69
+#define	LM85_VERSTEP_EMC6D103S		0x6A	/* Also known as EMC6D103:A2 */
 
 #define	LM85_REG_CONFIG			0x40
 
@@ -280,10 +283,6 @@ struct lm85_zone {
 	u8 hyst;	/* Low limit hysteresis. (0-15) */
 	u8 range;	/* Temp range, encoded */
 	s8 critical;	/* "All fans ON" temp limit */
-	u8 off_desired; /* Actual "off" temperature specified.  Preserved
-			 * to prevent "drift" as other autofan control
-			 * values change.
-			 */
 	u8 max_desired; /* Actual "max" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
@@ -303,6 +302,8 @@ struct lm85_data {
 	const int *freq_map;
 	enum chips type;
 
+	bool has_vid5;	/* true if VID5 is configured for ADT7463 or ADT7468 */
+
 	struct mutex update_lock;
 	int valid;		/* !=0 if following fields are valid */
 	unsigned long last_reading;	/* In jiffies */
@@ -348,6 +349,8 @@ static const struct i2c_device_id lm85_id[] = {
 	{ "emc6d100", emc6d100 },
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
+	{ "emc6d103", emc6d103 },
+	{ "emc6d103s", emc6d103s },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -416,8 +419,7 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
 
-	if ((data->type == adt7463 || data->type == adt7468) &&
-	    (data->vid & 0x80)) {
+	if (data->has_vid5) {
 		/* 6-pin VID (VRM 10) */
 		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
 	} else {
@@ -887,7 +889,6 @@ static ssize_t set_temp_auto_temp_off(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 	min = TEMP_FROM_REG(data->zone[nr].limit);
-	data->zone[nr].off_desired = TEMP_TO_REG(val);
 	data->zone[nr].hyst = HYST_TO_REG(min - val);
 	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
@@ -930,18 +931,6 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
 		((data->zone[nr].range & 0x0f) << 4)
 		| (data->pwm_freq[nr] & 0x07));
 
-/* Update temp_auto_hyst and temp_auto_off */
-	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
-		data->zone[nr].limit) - TEMP_FROM_REG(
-		data->zone[nr].off_desired));
-	if (nr == 0 || nr == 1) {
-		lm85_write_value(client, LM85_REG_AFAN_HYST1,
-			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst);
-	} else {
-		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4));
-	}
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1080,13 +1069,7 @@ static struct attribute *lm85_attributes[] = {
 	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
 
-	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
-	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
-	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
 	&sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
@@ -1107,6 +1090,26 @@ static const struct attribute_group lm85_group = {
 	.attrs = lm85_attributes,
 };
 
+static struct attribute *lm85_attributes_minctl[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+};
+
+static const struct attribute_group lm85_group_minctl = {
+	.attrs = lm85_attributes_minctl,
+};
+
+static struct attribute *lm85_attributes_temp_off[] = {
+	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+};
+
+static const struct attribute_group lm85_group_temp_off = {
+	.attrs = lm85_attributes_temp_off,
+};
+
 static struct attribute *lm85_attributes_in4[] = {
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 	&sensor_dev_attr_in4_min.dev_attr.attr,
@@ -1250,6 +1253,13 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 		case LM85_VERSTEP_EMC6D102:
 			type_name = "emc6d102";
 			break;
+		case LM85_VERSTEP_EMC6D103_A0:
+		case LM85_VERSTEP_EMC6D103_A1:
+			type_name = "emc6d103";
+			break;
+		case LM85_VERSTEP_EMC6D103S:
+			type_name = "emc6d103s";
+			break;
 		}
 	} else {
 		dev_dbg(&adapter->dev,
@@ -1262,6 +1272,19 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 	return 0;
 }
 
+static void lm85_remove_files(struct i2c_client *client, struct lm85_data *data)
+{
+	sysfs_remove_group(&client->dev.kobj, &lm85_group);
+	if (data->type != emc6d103s) {
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_minctl);
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_temp_off);
+	}
+	if (!data->has_vid5)
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
+	if (data->type == emc6d100)
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+}
+
 static int lm85_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id)
 {
@@ -1283,6 +1306,8 @@ static int lm85_probe(struct i2c_client *client,
 	case adt7468:
 	case emc6d100:
 	case emc6d102:
+	case emc6d103:
+	case emc6d103s:
 		data->freq_map = adm1027_freq_map;
 		break;
 	default:
@@ -1300,11 +1325,26 @@ static int lm85_probe(struct i2c_client *client,
 	if (err)
 		goto err_kfree;
 
+	/* minctl and temp_off exist on all chips except emc6d103s */
+	if (data->type != emc6d103s) {
+		err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
+		if (err)
+			goto err_kfree;
+		err = sysfs_create_group(&client->dev.kobj,
+					 &lm85_group_temp_off);
+		if (err)
+			goto err_kfree;
+	}
+
 	/* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
 	   as a sixth digital VID input rather than an analog input. */
-	data->vid = lm85_read_value(client, LM85_REG_VID);
-	if (!((data->type == adt7463 || data->type == adt7468) &&
-	    (data->vid & 0x80)))
+	if (data->type == adt7463 || data->type == adt7468) {
+		u8 vid = lm85_read_value(client, LM85_REG_VID);
+		if (vid & 0x80)
+			data->has_vid5 = true;
+	}
+
+	if (!data->has_vid5)
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in4)))
 			goto err_remove_files;
@@ -1325,10 +1365,7 @@ static int lm85_probe(struct i2c_client *client,
 
 	/* Error out and cleanup code */
  err_remove_files:
-	sysfs_remove_group(&client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
-	if (data->type == emc6d100)
-		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+	lm85_remove_files(client, data);
  err_kfree:
 	kfree(data);
 	return err;
@@ -1338,10 +1375,7 @@ static int lm85_remove(struct i2c_client *client)
 {
 	struct lm85_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
-	if (data->type == emc6d100)
-		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+	lm85_remove_files(client, data);
 	kfree(data);
 	return 0;
 }
@@ -1438,11 +1472,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_FAN(i));
 		}
 
-		if (!((data->type == adt7463 || data->type == adt7468) &&
-		    (data->vid & 0x80))) {
-			data->in[4] = lm85_read_value(client,
-				      LM85_REG_IN(4));
-		}
+		if (!data->has_vid5)
+			data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
 
 		if (data->type == adt7468)
 			data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
@@ -1468,7 +1499,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			/* More alarm bits */
 			data->alarms |= lm85_read_value(client,
 						EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102) {
+		} else if (data->type == emc6d102 || data->type == emc6d103 ||
+			   data->type == emc6d103s) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
@@ -1509,8 +1541,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
 		}
 
-		if (!((data->type == adt7463 || data->type == adt7468) &&
-		    (data->vid & 0x80))) {
+		if (!data->has_vid5)  {
 			data->in_min[4] = lm85_read_value(client,
 					  LM85_REG_IN_MIN(4));
 			data->in_max[4] = lm85_read_value(client,
@@ -1554,17 +1585,19 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			}
 		}
 
-		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
-		data->autofan[0].min_off = (i & 0x20) != 0;
-		data->autofan[1].min_off = (i & 0x40) != 0;
-		data->autofan[2].min_off = (i & 0x80) != 0;
+		if (data->type != emc6d103s) {
+			i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+			data->autofan[0].min_off = (i & 0x20) != 0;
+			data->autofan[1].min_off = (i & 0x40) != 0;
+			data->autofan[2].min_off = (i & 0x80) != 0;
 
-		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
-		data->zone[0].hyst = i >> 4;
-		data->zone[1].hyst = i & 0x0f;
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+			data->zone[0].hyst = i >> 4;
+			data->zone[1].hyst = i & 0x0f;
 
-		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
-		data->zone[2].hyst = i >> 4;
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+			data->zone[2].hyst = i >> 4;
+		}
 
 		data->last_config = jiffies;
 	}  /* last_config */