diff options
Diffstat (limited to 'drivers/hwmon/pc87360.c')
| -rw-r--r-- | drivers/hwmon/pc87360.c | 73 |
1 files changed, 46 insertions, 27 deletions
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 3d99b8854d7..b54637efc87 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -498,9 +498,11 @@ static struct sensor_device_attribute in_max[] = { #define CHAN_ALM_MAX 0x04 /* max limit exceeded */ #define TEMP_ALM_CRIT 0x08 /* temp crit exceeded (temp only) */ -/* show_in_min/max_alarm() reads data from the per-channel status - register (sec 11.5.12), not the vin event status registers (sec - 11.5.2) that (legacy) show_in_alarm() resds (via data->in_alarms) */ +/* + * show_in_min/max_alarm() reads data from the per-channel status + * register (sec 11.5.12), not the vin event status registers (sec + * 11.5.2) that (legacy) show_in_alarm() resds (via data->in_alarms) + */ static ssize_t show_in_min_alarm(struct device *dev, struct device_attribute *devattr, char *buf) @@ -679,9 +681,10 @@ static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devat return count; } -/* the +11 term below reflects the fact that VLM units 11,12,13 are - used in the chip to measure voltage across the thermistors -*/ +/* + * the +11 term below reflects the fact that VLM units 11,12,13 are + * used in the chip to measure voltage across the thermistors + */ static struct sensor_device_attribute therm_input[] = { SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11), SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11), @@ -717,8 +720,10 @@ static struct sensor_device_attribute therm_crit[] = { show_therm_crit, set_therm_crit, 2+11), }; -/* show_therm_min/max_alarm() reads data from the per-channel voltage - status register (sec 11.5.12) */ +/* + * show_therm_min/max_alarm() reads data from the per-channel voltage + * status register (sec 11.5.12) + */ static ssize_t show_therm_min_alarm(struct device *dev, struct device_attribute *devattr, char *buf) @@ -905,9 +910,11 @@ static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *att } static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); -/* show_temp_min/max_alarm() reads data from the per-channel status - register (sec 12.3.7), not the temp event status registers (sec - 12.3.2) that show_temp_alarm() reads (via data->temp_alarms) */ +/* + * show_temp_min/max_alarm() reads data from the per-channel status + * register (sec 12.3.7), not the temp event status registers (sec + * 12.3.2) that show_temp_alarm() reads (via data->temp_alarms) + */ static ssize_t show_temp_min_alarm(struct device *dev, struct device_attribute *devattr, char *buf) @@ -1063,9 +1070,11 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses } else if (i==1) { /* Voltages */ /* Are we using thermistors? */ if (*devid == 0xE9) { /* PC87366 */ - /* These registers are not logical-device - specific, just that we won't need them if - we don't use the VLM device */ + /* + * These registers are not logical-device + * specific, just that we won't need them if + * we don't use the VLM device + */ confreg[2] = superio_inb(sioaddr, 0x2B); confreg[3] = superio_inb(sioaddr, 0x25); @@ -1147,9 +1156,11 @@ static int __devinit pc87360_probe(struct platform_device *pdev) if (data->fannr) data->fan_conf = confreg[0] | (confreg[1] << 8); - /* Use the correct reference voltage - Unless both the VLM and the TMS logical devices agree to - use an external Vref, the internal one is used. */ + /* + * Use the correct reference voltage + * Unless both the VLM and the TMS logical devices agree to + * use an external Vref, the internal one is used. + */ if (data->innr) { i = pc87360_read_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONFIG); @@ -1287,8 +1298,10 @@ static int __devexit pc87360_remove(struct platform_device *pdev) return 0; } -/* ldi is the logical device index - bank is for voltages and temperatures only */ +/* + * ldi is the logical device index + * bank is for voltages and temperatures only + */ static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, u8 reg) { @@ -1359,8 +1372,10 @@ static void pc87360_init_device(struct platform_device *pdev, } } - /* We can't blindly trust the Super-I/O space configuration bit, - most BIOS won't set it properly */ + /* + * We can't blindly trust the Super-I/O space configuration bit, + * most BIOS won't set it properly + */ dev_dbg(&pdev->dev, "bios thermistors:%d\n", use_thermistors); for (i = 11; i < data->innr; i++) { reg = pc87360_read_value(data, LD_IN, i, @@ -1391,8 +1406,10 @@ static void pc87360_init_device(struct platform_device *pdev, if (use_thermistors) { for (i = 11; i < data->innr; i++) { if (init >= init_in[i]) { - /* The pin may already be used by thermal - diodes */ + /* + * The pin may already be used by thermal + * diodes + */ reg = pc87360_read_value(data, LD_TEMP, (i-11)/2, PC87365_REG_TEMP_STATUS); if (reg & CHAN_ENA) { @@ -1444,10 +1461,12 @@ static void pc87360_init_device(struct platform_device *pdev, if (init >= 2) { /* Chip config as documented by National Semi. */ pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08); - /* We voluntarily omit the bank here, in case the - sequence itself matters. It shouldn't be a problem, - since nobody else is supposed to access the - device at that point. */ + /* + * We voluntarily omit the bank here, in case the + * sequence itself matters. It shouldn't be a problem, + * since nobody else is supposed to access the + * device at that point. + */ pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04); pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35); pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05); |