diff options
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus.h')
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus.h | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h new file mode 100644 index 00000000000..50647ab7235 --- /dev/null +++ b/drivers/hwmon/pmbus/pmbus.h @@ -0,0 +1,311 @@ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PMBUS_H +#define PMBUS_H + +/* + * Registers + */ +#define PMBUS_PAGE 0x00 +#define PMBUS_OPERATION 0x01 +#define PMBUS_ON_OFF_CONFIG 0x02 +#define PMBUS_CLEAR_FAULTS 0x03 +#define PMBUS_PHASE 0x04 + +#define PMBUS_CAPABILITY 0x19 +#define PMBUS_QUERY 0x1A + +#define PMBUS_VOUT_MODE 0x20 +#define PMBUS_VOUT_COMMAND 0x21 +#define PMBUS_VOUT_TRIM 0x22 +#define PMBUS_VOUT_CAL_OFFSET 0x23 +#define PMBUS_VOUT_MAX 0x24 +#define PMBUS_VOUT_MARGIN_HIGH 0x25 +#define PMBUS_VOUT_MARGIN_LOW 0x26 +#define PMBUS_VOUT_TRANSITION_RATE 0x27 +#define PMBUS_VOUT_DROOP 0x28 +#define PMBUS_VOUT_SCALE_LOOP 0x29 +#define PMBUS_VOUT_SCALE_MONITOR 0x2A + +#define PMBUS_COEFFICIENTS 0x30 +#define PMBUS_POUT_MAX 0x31 + +#define PMBUS_FAN_CONFIG_12 0x3A +#define PMBUS_FAN_COMMAND_1 0x3B +#define PMBUS_FAN_COMMAND_2 0x3C +#define PMBUS_FAN_CONFIG_34 0x3D +#define PMBUS_FAN_COMMAND_3 0x3E +#define PMBUS_FAN_COMMAND_4 0x3F + +#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 +#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 +#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 +#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 +#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 +#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 +#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 +#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 +#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 +#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 +#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A +#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B +#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C + +#define PMBUS_OT_FAULT_LIMIT 0x4F +#define PMBUS_OT_FAULT_RESPONSE 0x50 +#define PMBUS_OT_WARN_LIMIT 0x51 +#define PMBUS_UT_WARN_LIMIT 0x52 +#define PMBUS_UT_FAULT_LIMIT 0x53 +#define PMBUS_UT_FAULT_RESPONSE 0x54 +#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 +#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 +#define PMBUS_VIN_OV_WARN_LIMIT 0x57 +#define PMBUS_VIN_UV_WARN_LIMIT 0x58 +#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 + +#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B +#define PMBUS_IIN_OC_WARN_LIMIT 0x5D + +#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 +#define PMBUS_POUT_OP_WARN_LIMIT 0x6A +#define PMBUS_PIN_OP_WARN_LIMIT 0x6B + +#define PMBUS_STATUS_BYTE 0x78 +#define PMBUS_STATUS_WORD 0x79 +#define PMBUS_STATUS_VOUT 0x7A +#define PMBUS_STATUS_IOUT 0x7B +#define PMBUS_STATUS_INPUT 0x7C +#define PMBUS_STATUS_TEMPERATURE 0x7D +#define PMBUS_STATUS_CML 0x7E +#define PMBUS_STATUS_OTHER 0x7F +#define PMBUS_STATUS_MFR_SPECIFIC 0x80 +#define PMBUS_STATUS_FAN_12 0x81 +#define PMBUS_STATUS_FAN_34 0x82 + +#define PMBUS_READ_VIN 0x88 +#define PMBUS_READ_IIN 0x89 +#define PMBUS_READ_VCAP 0x8A +#define PMBUS_READ_VOUT 0x8B +#define PMBUS_READ_IOUT 0x8C +#define PMBUS_READ_TEMPERATURE_1 0x8D +#define PMBUS_READ_TEMPERATURE_2 0x8E +#define PMBUS_READ_TEMPERATURE_3 0x8F +#define PMBUS_READ_FAN_SPEED_1 0x90 +#define PMBUS_READ_FAN_SPEED_2 0x91 +#define PMBUS_READ_FAN_SPEED_3 0x92 +#define PMBUS_READ_FAN_SPEED_4 0x93 +#define PMBUS_READ_DUTY_CYCLE 0x94 +#define PMBUS_READ_FREQUENCY 0x95 +#define PMBUS_READ_POUT 0x96 +#define PMBUS_READ_PIN 0x97 + +#define PMBUS_REVISION 0x98 +#define PMBUS_MFR_ID 0x99 +#define PMBUS_MFR_MODEL 0x9A +#define PMBUS_MFR_REVISION 0x9B +#define PMBUS_MFR_LOCATION 0x9C +#define PMBUS_MFR_DATE 0x9D +#define PMBUS_MFR_SERIAL 0x9E + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT (1<<4) +#define PB_CAPABILITY_ERROR_CHECK (1<<7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) +#define PB_FAN_2_RPM (1 << 2) +#define PB_FAN_2_INSTALLED (1 << 3) +#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) +#define PB_FAN_1_RPM (1 << 6) +#define PB_FAN_1_INSTALLED (1 << 7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE (1<<0) +#define PB_STATUS_CML (1<<1) +#define PB_STATUS_TEMPERATURE (1<<2) +#define PB_STATUS_VIN_UV (1<<3) +#define PB_STATUS_IOUT_OC (1<<4) +#define PB_STATUS_VOUT_OV (1<<5) +#define PB_STATUS_OFF (1<<6) +#define PB_STATUS_BUSY (1<<7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN (1<<8) +#define PB_STATUS_OTHER (1<<9) +#define PB_STATUS_FANS (1<<10) +#define PB_STATUS_POWER_GOOD_N (1<<11) +#define PB_STATUS_WORD_MFR (1<<12) +#define PB_STATUS_INPUT (1<<13) +#define PB_STATUS_IOUT_POUT (1<<14) +#define PB_STATUS_VOUT (1<<15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING (1<<0) +#define PB_POUT_OP_FAULT (1<<1) +#define PB_POWER_LIMITING (1<<2) +#define PB_CURRENT_SHARE_FAULT (1<<3) +#define PB_IOUT_UC_FAULT (1<<4) +#define PB_IOUT_OC_WARNING (1<<5) +#define PB_IOUT_OC_LV_FAULT (1<<6) +#define PB_IOUT_OC_FAULT (1<<7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT (1<<4) +#define PB_VOLTAGE_UV_WARNING (1<<5) +#define PB_VOLTAGE_OV_WARNING (1<<6) +#define PB_VOLTAGE_OV_FAULT (1<<7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING (1<<0) +#define PB_IIN_OC_WARNING (1<<1) +#define PB_IIN_OC_FAULT (1<<2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT (1<<4) +#define PB_TEMP_UT_WARNING (1<<5) +#define PB_TEMP_OT_WARNING (1<<6) +#define PB_TEMP_OT_FAULT (1<<7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING (1<<0) +#define PB_FAN_AIRFLOW_FAULT (1<<1) +#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) +#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) +#define PB_FAN_FAN2_WARNING (1<<4) +#define PB_FAN_FAN1_WARNING (1<<5) +#define PB_FAN_FAN2_FAULT (1<<6) +#define PB_FAN_FAN1_FAULT (1<<7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) +#define PB_CML_FAULT_OTHER_COMM (1<<1) +#define PB_CML_FAULT_PROCESSOR (1<<3) +#define PB_CML_FAULT_MEMORY (1<<4) +#define PB_CML_FAULT_PACKET_ERROR (1<<5) +#define PB_CML_FAULT_INVALID_DATA (1<<6) +#define PB_CML_FAULT_INVALID_COMMAND (1<<7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN (1 << 0) +#define PMBUS_HAVE_VCAP (1 << 1) +#define PMBUS_HAVE_VOUT (1 << 2) +#define PMBUS_HAVE_IIN (1 << 3) +#define PMBUS_HAVE_IOUT (1 << 4) +#define PMBUS_HAVE_PIN (1 << 5) +#define PMBUS_HAVE_POUT (1 << 6) +#define PMBUS_HAVE_FAN12 (1 << 7) +#define PMBUS_HAVE_FAN34 (1 << 8) +#define PMBUS_HAVE_TEMP (1 << 9) +#define PMBUS_HAVE_TEMP2 (1 << 10) +#define PMBUS_HAVE_TEMP3 (1 << 11) +#define PMBUS_HAVE_STATUS_VOUT (1 << 12) +#define PMBUS_HAVE_STATUS_IOUT (1 << 13) +#define PMBUS_HAVE_STATUS_INPUT (1 << 14) +#define PMBUS_HAVE_STATUS_TEMP (1 << 15) +#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) +#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + bool direct[PSC_NUM_CLASSES]; + /* true if device uses direct data format + for the given sensor class */ + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); +}; + +/* Function declarations */ + +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ |