diff options
Diffstat (limited to 'drivers/hwmon')
45 files changed, 3000 insertions, 2349 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc45c9..00ff5334849 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -330,6 +330,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3bdb05a5cbd..d098677e08d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o +obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index ed33fddc4de..f00f497b9ca 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -30,6 +30,7 @@ #include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> +#include <linux/dmi.h> #include <asm/io.h> /* uGuru3 bank addresses */ @@ -323,7 +324,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, "unknown", { + { 0x0013, "Abit AW8D", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -349,6 +350,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX2 Fan", 36, 2, 60, 1, 0 }, { "AUX3 Fan", 37, 2, 60, 1, 0 }, { "AUX4 Fan", 38, 2, 60, 1, 0 }, + { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, { 0x0014, "Abit AB9 Pro", { @@ -1111,11 +1113,12 @@ static int __init abituguru3_detect(void) { /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05 - at CMD instead, why is unknown. So we test for 0x05 too. */ + or 0x55 at CMD instead, why is unknown. */ u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA); u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD); if (((data_val == 0x00) || (data_val == 0x08)) && - ((cmd_val == 0xAC) || (cmd_val == 0x05))) + ((cmd_val == 0xAC) || (cmd_val == 0x05) || + (cmd_val == 0x55))) return ABIT_UGURU3_BASE; ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " @@ -1138,6 +1141,15 @@ static int __init abituguru3_init(void) int address, err; struct resource res = { .flags = IORESOURCE_IO }; +#ifdef CONFIG_DMI + const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + + /* safety check, refuse to load on non Abit motherboards */ + if (!force && (!board_vendor || + strcmp(board_vendor, "http://www.abit.com.tw/"))) + return -ENODEV; +#endif + address = abituguru3_detect(); if (address < 0) return address; diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index 466b9ee9279..f97b5b35687 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -23,12 +23,9 @@ #include "lm75.h" -#define DRV_VERSION "0.3" +#define DRV_VERSION "0.4" -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END }; -/* Insmod parameters */ -I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418); +enum chips { ad7416, ad7417, ad7418 }; /* AD7418 registers */ #define AD7418_REG_TEMP_IN 0x00 @@ -46,7 +43,6 @@ static const u8 AD7418_REG_TEMP[] = { AD7418_REG_TEMP_IN, AD7418_REG_TEMP_OS }; struct ad7418_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; enum chips type; @@ -58,16 +54,25 @@ struct ad7418_data { u16 in[4]; }; -static int ad7418_attach_adapter(struct i2c_adapter *adapter); -static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind); -static int ad7418_detach_client(struct i2c_client *client); +static int ad7418_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ad7418_remove(struct i2c_client *client); + +static const struct i2c_device_id ad7418_id[] = { + { "ad7416", ad7416 }, + { "ad7417", ad7417 }, + { "ad7418", ad7418 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7418_id); static struct i2c_driver ad7418_driver = { .driver = { .name = "ad7418", }, - .attach_adapter = ad7418_attach_adapter, - .detach_client = ad7418_detach_client, + .probe = ad7418_probe, + .remove = ad7418_remove, + .id_table = ad7418_id, }; /* All registers are word-sized, except for the configuration registers. @@ -192,13 +197,6 @@ static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 1); static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 2); static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 3); -static int ad7418_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ad7418_detect); -} - static struct attribute *ad7416_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, @@ -225,98 +223,46 @@ static struct attribute *ad7418_attributes[] = { NULL }; -static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) +static int ad7418_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct ad7418_data *data; - int err = 0; + int err; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) + I2C_FUNC_SMBUS_WORD_DATA)) { + err = -EOPNOTSUPP; goto exit; + } if (!(data = kzalloc(sizeof(struct ad7418_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &ad7418_driver; - i2c_set_clientdata(client, data); mutex_init(&data->lock); - - /* AD7418 has a curious behaviour on registers 6 and 7. They - * both always read 0xC071 and are not documented on the datasheet. - * We use them to detect the chip. - */ - if (kind <= 0) { - int reg, reg6, reg7; - - /* the AD7416 lies within this address range, but I have - * no means to check. - */ - if (address >= 0x48 && address <= 0x4f) { - /* XXX add tests for AD7416 here */ - /* data->type = ad7416; */ - } - /* here we might have AD7417 or AD7418 */ - else if (address >= 0x28 && address <= 0x2f) { - reg6 = i2c_smbus_read_word_data(client, 0x06); - reg7 = i2c_smbus_read_word_data(client, 0x07); - - if (address == 0x28 && reg6 == 0xC071 && reg7 == 0xC071) - data->type = ad7418; - - /* XXX add tests for AD7417 here */ - - - /* both AD7417 and AD7418 have bits 0-5 of - * the CONF2 register at 0 - */ - reg = i2c_smbus_read_byte_data(client, - AD7418_REG_CONF2); - if (reg & 0x3F) - data->type = any_chip; /* detection failed */ - } - } else { - dev_dbg(&adapter->dev, "detection forced\n"); - } - - if (kind > 0) - data->type = kind; - else if (kind < 0 && data->type == any_chip) { - err = -ENODEV; - goto exit_free; - } + data->type = id->driver_data; switch (data->type) { - case any_chip: case ad7416: data->adc_max = 0; data->attrs.attrs = ad7416_attributes; - strlcpy(client->name, "ad7416", I2C_NAME_SIZE); break; case ad7417: data->adc_max = 4; data->attrs.attrs = ad7417_attributes; - strlcpy(client->name, "ad7417", I2C_NAME_SIZE); break; case ad7418: data->adc_max = 1; data->attrs.attrs = ad7418_attributes; - strlcpy(client->name, "ad7418", I2C_NAME_SIZE); break; } - if ((err = i2c_attach_client(client))) - goto exit_free; - dev_info(&client->dev, "%s chip found\n", client->name); /* Initialize the AD7418 chip */ @@ -324,7 +270,7 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -336,20 +282,17 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int ad7418_detach_client(struct i2c_client *client) +static int ad7418_remove(struct i2c_client *client) { struct ad7418_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index ecbf69484bf..b11e06f644b 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -78,7 +78,6 @@ clearing it. Weird, ey? --Phil */ /* Each client has this additional data */ struct adm1021_data { - struct i2c_client client; struct device *hwmon_dev; enum chips type; @@ -98,23 +97,42 @@ struct adm1021_data { u8 remote_temp_offset_prec; }; -static int adm1021_attach_adapter(struct i2c_adapter *adapter); -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1021_init_client(struct i2c_client *client); -static int adm1021_detach_client(struct i2c_client *client); +static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ static int read_only; +static const struct i2c_device_id adm1021_id[] = { + { "adm1021", adm1021 }, + { "adm1023", adm1023 }, + { "max1617", max1617 }, + { "max1617a", max1617a }, + { "thmc10", thmc10 }, + { "lm84", lm84 }, + { "gl523sm", gl523sm }, + { "mc1066", mc1066 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1021_id); + /* This is the driver that will be inserted */ static struct i2c_driver adm1021_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1021", }, - .attach_adapter = adm1021_attach_adapter, - .detach_client = adm1021_detach_client, + .probe = adm1021_probe, + .remove = adm1021_remove, + .id_table = adm1021_id, + .detect = adm1021_detect, + .address_data = &addr_data, }; static ssize_t show_temp(struct device *dev, @@ -216,13 +234,6 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static int adm1021_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1021_detect); -} - static struct attribute *adm1021_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, @@ -243,36 +254,21 @@ static const struct attribute_group adm1021_group = { .attrs = adm1021_attributes, }; -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i; - struct i2c_client *client; - struct adm1021_data *data; - int err = 0; const char *type_name = ""; int conv_rate, status, config; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("adm1021: detect failed, " "smbus byte data not supported!\n"); - goto error0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1021 register values. */ - - if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { - pr_debug("adm1021: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto error0; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1021_driver; status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS); conv_rate = i2c_smbus_read_byte_data(client, ADM1021_REG_CONV_RATE_R); @@ -284,8 +280,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) || (conv_rate & 0xF8) != 0x00) { pr_debug("adm1021: detect failed, " "chip not detected!\n"); - err = -ENODEV; - goto error1; + return -ENODEV; } } @@ -336,24 +331,36 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) type_name = "mc1066"; } pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n", - type_name, i2c_adapter_id(adapter), address); + type_name, i2c_adapter_id(adapter), client->addr); + strlcpy(info->type, type_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields */ - strlcpy(client->name, type_name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1021_data *data; + int err; + + data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL); + if (!data) { + pr_debug("adm1021: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto error0; + } + + i2c_set_clientdata(client, data); + data->type = id->driver_data; + mutex_init(&data->update_lock); /* Initialize the ADM1021 chip */ - if (kind != lm84 && !read_only) + if (data->type != lm84 && !read_only) adm1021_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group))) - goto error2; + goto error1; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -365,8 +372,6 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) error3: sysfs_remove_group(&client->dev.kobj, &adm1021_group); -error2: - i2c_detach_client(client); error1: kfree(data); error0: @@ -382,17 +387,13 @@ static void adm1021_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); } -static int adm1021_detach_client(struct i2c_client *client) +static int adm1021_remove(struct i2c_client *client) { struct adm1021_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1021_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 1d76de7d75c..4db04d603ec 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -2,7 +2,7 @@ * adm1025.c * * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com> - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> * * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 * voltages (including its own power source) and up to two temperatures @@ -109,22 +109,35 @@ static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 }; * Functions declaration */ -static int adm1025_attach_adapter(struct i2c_adapter *adapter); -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1025_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1025_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1025_init_client(struct i2c_client *client); -static int adm1025_detach_client(struct i2c_client *client); +static int adm1025_remove(struct i2c_client *client); static struct adm1025_data *adm1025_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id adm1025_id[] = { + { "adm1025", adm1025 }, + { "ne1619", ne1619 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1025_id); + static struct i2c_driver adm1025_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1025", }, - .attach_adapter = adm1025_attach_adapter, - .detach_client = adm1025_detach_client, + .probe = adm1025_probe, + .remove = adm1025_remove, + .id_table = adm1025_id, + .detect = adm1025_detect, + .address_data = &addr_data, }; /* @@ -132,7 +145,6 @@ static struct i2c_driver adm1025_driver = { */ struct adm1025_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -344,13 +356,6 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); * Real code */ -static int adm1025_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1025_detect); -} - static struct attribute *adm1025_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -403,31 +408,16 @@ static const struct attribute_group adm1025_group_in4 = { .attrs = adm1025_attributes_in4, }; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1025_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adm1025_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; const char *name = ""; u8 config; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1025_driver; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -448,8 +438,8 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) ADM1025_REG_STATUS2) & 0xBC) != 0x00) { dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x.\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } @@ -465,7 +455,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) } } else if (man_id == 0xA1) { /* Philips */ - if (address != 0x2E + if (client->addr != 0x2E && (chip_id & 0xF0) == 0x20) { /* NE1619 */ kind = ne1619; } @@ -475,7 +465,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } @@ -484,23 +474,36 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == ne1619) { name = "ne1619"; } + strlcpy(info->type, name, I2C_NAME_SIZE); - /* We can fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; +static int adm1025_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1025_data *data; + int err; + u8 config; + + data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the ADM1025 chip */ adm1025_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group))) - goto exit_detach; + goto exit_free; /* Pin 11 is either in4 (+12V) or VID4 */ + config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); if (!(config & 0x20)) { if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group_in4))) @@ -518,8 +521,6 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &adm1025_group); sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -568,18 +569,14 @@ static void adm1025_init_client(struct i2c_client *client) (reg&0x7E)|0x01); } -static int adm1025_detach_client(struct i2c_client *client) +static int adm1025_remove(struct i2c_client *client) { struct adm1025_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1025_group); sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 904c6ce9d83..7fe2441fc84 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -259,7 +259,6 @@ struct pwm_data { }; struct adm1026_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -293,10 +292,11 @@ struct adm1026_data { u8 config3; /* Register value */ }; -static int adm1026_attach_adapter(struct i2c_adapter *adapter); -static int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind); -static int adm1026_detach_client(struct i2c_client *client); +static int adm1026_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1026_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adm1026_remove(struct i2c_client *client); static int adm1026_read_value(struct i2c_client *client, u8 reg); static int adm1026_write_value(struct i2c_client *client, u8 reg, int value); static void adm1026_print_gpio(struct i2c_client *client); @@ -305,22 +305,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev); static void adm1026_init_client(struct i2c_client *client); +static const struct i2c_device_id adm1026_id[] = { + { "adm1026", adm1026 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1026_id); + static struct i2c_driver adm1026_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1026", }, - .attach_adapter = adm1026_attach_adapter, - .detach_client = adm1026_detach_client, + .probe = adm1026_probe, + .remove = adm1026_remove, + .id_table = adm1026_id, + .detect = adm1026_detect, + .address_data = &addr_data, }; -static int adm1026_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) { - return 0; - } - return i2c_probe(adapter, &addr_data, adm1026_detect); -} - static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -1647,48 +1649,32 @@ static const struct attribute_group adm1026_group_in8_9 = { .attrs = adm1026_attributes_in8_9, }; -static int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1026_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; int company, verstep; - struct i2c_client *client; - struct adm1026_data *data; - int err = 0; - const char *type_name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ - goto exit; + return -ENODEV; }; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1026_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1026_driver; - /* Now, we do the remaining detection. */ company = adm1026_read_value(client, ADM1026_REG_COMPANY); verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP); - dev_dbg(&client->dev, "Detecting device at %d,0x%02x with" + dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ if (kind <= 0) { - dev_dbg(&client->dev, "Autodetecting device at %d,0x%02x " + dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x " "...\n", i2c_adapter_id(adapter), address); if (company == ADM1026_COMPANY_ANALOG_DEV && verstep == ADM1026_VERSTEP_ADM1026) { @@ -1704,7 +1690,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, verstep); kind = any_chip; } else { - dev_dbg(&client->dev, ": Autodetection " + dev_dbg(&adapter->dev, ": Autodetection " "failed\n"); /* Not an ADM1026 ... */ if (kind == 0) { /* User used force=x,y */ @@ -1713,33 +1699,29 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, "force_adm1026.\n", i2c_adapter_id(adapter), address); } - goto exitfree; + return -ENODEV; } } + strlcpy(info->type, "adm1026", I2C_NAME_SIZE); - /* Fill in the chip specific driver values */ - switch (kind) { - case any_chip : - type_name = "adm1026"; - break; - case adm1026 : - type_name = "adm1026"; - break; - default : - dev_err(&adapter->dev, ": Internal error, invalid " - "kind (%d)!\n", kind); - err = -EFAULT; - goto exitfree; + return 0; +} + +static int adm1026_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1026_data *data; + int err; + + data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - strlcpy(client->name, type_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields */ + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exitfree; - /* Set the VRM version */ data->vrm = vid_which_vrm(); @@ -1748,7 +1730,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1026_group))) - goto exitdetach; + goto exitfree; if (data->config1 & CFG1_AIN8_9) err = sysfs_create_group(&client->dev.kobj, &adm1026_group_in8_9); @@ -1773,15 +1755,13 @@ exitremove: sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9); else sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3); -exitdetach: - i2c_detach_client(client); exitfree: kfree(data); exit: return err; } -static int adm1026_detach_client(struct i2c_client *client) +static int adm1026_remove(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); @@ -1790,7 +1770,6 @@ static int adm1026_detach_client(struct i2c_client *client) sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9); else sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3); - i2c_detach_client(client); kfree(data); return 0; } diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 2c6608d453c..ba84ca5923f 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -115,9 +115,11 @@ static const u8 ADM1029_REG_FAN_DIV[] = { * Functions declaration */ -static int adm1029_attach_adapter(struct i2c_adapter *adapter); -static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind); -static int adm1029_detach_client(struct i2c_client *client); +static int adm1029_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1029_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adm1029_remove(struct i2c_client *client); static struct adm1029_data *adm1029_update_device(struct device *dev); static int adm1029_init_client(struct i2c_client *client); @@ -125,12 +127,22 @@ static int adm1029_init_client(struct i2c_client *client); * Driver data (common to all clients) */ +static const struct i2c_device_id adm1029_id[] = { + { "adm1029", adm1029 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1029_id); + static struct i2c_driver adm1029_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1029", }, - .attach_adapter = adm1029_attach_adapter, - .detach_client = adm1029_detach_client, + .probe = adm1029_probe, + .remove = adm1029_remove, + .id_table = adm1029_id, + .detect = adm1029_detect, + .address_data = &addr_data, }; /* @@ -138,7 +150,6 @@ static struct i2c_driver adm1029_driver = { */ struct adm1029_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -284,37 +295,14 @@ static const struct attribute_group adm1029_group = { * Real code */ -static int adm1029_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1029_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1029_detect); -} + struct i2c_adapter *adapter = client->adapter; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ - -static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct adm1029_data *data; - int err = 0; - const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1029_driver; + return -ENODEV; /* Now we do the detection and identification. A negative kind * means that the driver was loaded with no force parameter @@ -362,32 +350,41 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) if (kind <= 0) { /* identification failed */ pr_debug("adm1029: Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X)\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } + strlcpy(info->type, "adm1029", I2C_NAME_SIZE); - if (kind == adm1029) { - name = "adm1029"; + return 0; +} + +static int adm1029_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1029_data *data; + int err; + + data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* We can fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - /* * Initialize the ADM1029 chip * Check config register */ - if (adm1029_init_client(client) == 0) - goto exit_detach; + if (adm1029_init_client(client) == 0) { + err = -ENODEV; + goto exit_free; + } /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -399,8 +396,6 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&client->dev.kobj, &adm1029_group); - exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -424,17 +419,13 @@ static int adm1029_init_client(struct i2c_client *client) return 1; } -static int adm1029_detach_client(struct i2c_client *client) +static int adm1029_remove(struct i2c_client *client) { struct adm1029_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1029_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 2bffcab7dc9..789441830cd 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -70,7 +70,6 @@ typedef u8 auto_chan_table_t[8][2]; /* Each client has this additional data */ struct adm1031_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; int chip_type; @@ -99,19 +98,32 @@ struct adm1031_data { s8 temp_crit[3]; }; -static int adm1031_attach_adapter(struct i2c_adapter *adapter); -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1031_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1031_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1031_init_client(struct i2c_client *client); -static int adm1031_detach_client(struct i2c_client *client); +static int adm1031_remove(struct i2c_client *client); static struct adm1031_data *adm1031_update_device(struct device *dev); +static const struct i2c_device_id adm1031_id[] = { + { "adm1030", adm1030 }, + { "adm1031", adm1031 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1031_id); + /* This is the driver that will be inserted */ static struct i2c_driver adm1031_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1031", }, - .attach_adapter = adm1031_attach_adapter, - .detach_client = adm1031_detach_client, + .probe = adm1031_probe, + .remove = adm1031_remove, + .id_table = adm1031_id, + .detect = adm1031_detect, + .address_data = &addr_data, }; static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg) @@ -693,13 +705,6 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12); static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14); -static int adm1031_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1031_detect); -} - static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, @@ -770,27 +775,15 @@ static const struct attribute_group adm1031_group_opt = { .attrs = adm1031_attributes_opt, }; -/* This function is called by i2c_probe */ -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1031_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adm1031_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1031_driver; + return -ENODEV; if (kind < 0) { int id, co; @@ -798,7 +791,7 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) co = i2c_smbus_read_byte_data(client, 0x3e); if (!((id == 0x31 || id == 0x30) && co == 0x41)) - goto exit_free; + return -ENODEV; kind = (id == 0x30) ? adm1030 : adm1031; } @@ -809,28 +802,43 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) * auto fan control helper table. */ if (kind == adm1030) { name = "adm1030"; - data->chan_select_table = &auto_channel_select_table_adm1030; } else if (kind == adm1031) { name = "adm1031"; - data->chan_select_table = &auto_channel_select_table_adm1031; } - data->chip_type = kind; + strlcpy(info->type, name, I2C_NAME_SIZE); - strlcpy(client->name, name, I2C_NAME_SIZE); + return 0; +} + +static int adm1031_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1031_data *data; + int err; + + data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->chip_type = id->driver_data; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + if (data->chip_type == adm1030) + data->chan_select_table = &auto_channel_select_table_adm1030; + else + data->chan_select_table = &auto_channel_select_table_adm1031; /* Initialize the ADM1031 chip */ adm1031_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group))) - goto exit_detach; + goto exit_free; - if (kind == adm1031) { + if (data->chip_type == adm1031) { if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group_opt))) goto exit_remove; @@ -847,25 +855,19 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &adm1031_group); sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adm1031_detach_client(struct i2c_client *client) +static int adm1031_remove(struct i2c_client *client) { struct adm1031_data *data = i2c_get_clientdata(client); - int ret; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1031_group); sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt); - if ((ret = i2c_detach_client(client)) != 0) { - return ret; - } kfree(data); return 0; } diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 149ef25252e..2444b15f2e9 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -130,25 +130,37 @@ static inline unsigned int AOUT_FROM_REG(u8 reg) return SCALE(reg, 1250, 255); } -static int adm9240_attach_adapter(struct i2c_adapter *adapter); -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm9240_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm9240_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm9240_init_client(struct i2c_client *client); -static int adm9240_detach_client(struct i2c_client *client); +static int adm9240_remove(struct i2c_client *client); static struct adm9240_data *adm9240_update_device(struct device *dev); /* driver data */ +static const struct i2c_device_id adm9240_id[] = { + { "adm9240", adm9240 }, + { "ds1780", ds1780 }, + { "lm81", lm81 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm9240_id); + static struct i2c_driver adm9240_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm9240", }, - .attach_adapter = adm9240_attach_adapter, - .detach_client = adm9240_detach_client, + .probe = adm9240_probe, + .remove = adm9240_remove, + .id_table = adm9240_id, + .detect = adm9240_detect, + .address_data = &addr_data, }; /* per client data */ struct adm9240_data { - enum chips type; - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; @@ -532,28 +544,17 @@ static const struct attribute_group adm9240_group = { /*** sensor chip detect and driver install ***/ -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm9240_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct adm9240_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; const char *name = ""; + int address = new_client->addr; u8 man_id, die_rev; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm9240_driver; - new_client->flags = 0; + return -ENODEV; if (kind == 0) { kind = adm9240; @@ -566,7 +567,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) != address) { dev_err(&adapter->dev, "detect fail: address match, " "0x%02x\n", address); - goto exit_free; + return -ENODEV; } /* check known chip manufacturer */ @@ -581,7 +582,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } else { dev_err(&adapter->dev, "detect fail: unknown manuf, " "0x%02x\n", man_id); - goto exit_free; + return -ENODEV; } /* successful detect, print chip info */ @@ -600,20 +601,31 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == lm81) { name = "lm81"; } + strlcpy(info->type, name, I2C_NAME_SIZE); - /* fill in the remaining client fields and attach */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + return 0; +} - if ((err = i2c_attach_client(new_client))) - goto exit_free; +static int adm9240_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct adm9240_data *data; + int err; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); + mutex_init(&data->update_lock); adm9240_init_client(new_client); /* populate sysfs filesystem */ if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -625,32 +637,19 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &adm9240_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int adm9240_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm9240_detect); -} - -static int adm9240_detach_client(struct i2c_client *client) +static int adm9240_remove(struct i2c_client *client) { struct adm9240_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm9240_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 5c8b6e0ff47..5c39b4af1b2 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -64,7 +64,6 @@ static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */ /* Each client has this additional data */ struct ads7828_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; /* mutex protect updates */ char valid; /* !=0 if following fields are valid */ @@ -73,7 +72,10 @@ struct ads7828_data { }; /* Function declaration - necessary due to function dependencies */ -static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind); +static int ads7828_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ads7828_probe(struct i2c_client *client, + const struct i2c_device_id *id); /* The ADS7828 returns the 12-bit sample in two bytes, these are read as a word then byte-swapped */ @@ -156,58 +158,43 @@ static const struct attribute_group ads7828_group = { .attrs = ads7828_attributes, }; -static int ads7828_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ads7828_detect); -} - -static int ads7828_detach_client(struct i2c_client *client) +static int ads7828_remove(struct i2c_client *client) { struct ads7828_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ads7828_group); - i2c_detach_client(client); kfree(i2c_get_clientdata(client)); return 0; } +static const struct i2c_device_id ads7828_id[] = { + { "ads7828", ads7828 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ads7828_id); + /* This is the driver that will be inserted */ static struct i2c_driver ads7828_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "ads7828", }, - .attach_adapter = ads7828_attach_adapter, - .detach_client = ads7828_detach_client, + .probe = ads7828_probe, + .remove = ads7828_remove, + .id_table = ads7828_id, + .detect = ads7828_detect, + .address_data = &addr_data, }; -/* This function is called by i2c_probe */ -static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ads7828_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct ads7828_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = client->adapter; /* Check we have a valid client */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ads7828_read_value. */ - data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &ads7828_driver; + return -ENODEV; /* Now, we do the remaining detection. There is no identification dedicated register so attempt to sanity check using knowledge of @@ -225,32 +212,34 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) printk(KERN_DEBUG "%s : Doesn't look like an ads7828 device\n", __func__); - goto exit_free; + return -ENODEV; } } } + strlcpy(info->type, "ads7828", I2C_NAME_SIZE); - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ads7828; + return 0; +} - if (kind == ads7828) - name = "ads7828"; +static int ads7828_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ads7828_data *data; + int err; - /* Fill in the remaining client fields, put it into the global list */ - strlcpy(client->name, name, I2C_NAME_SIZE); + data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - err = i2c_attach_client(client); - if (err) - goto exit_free; - /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &ads7828_group); if (err) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -262,8 +251,6 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &ads7828_group); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 6b5325f33a2..d368d8f845e 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -138,7 +138,6 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) struct adt7470_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; struct mutex lock; @@ -164,16 +163,28 @@ struct adt7470_data { u8 pwm_auto_temp[ADT7470_PWM_COUNT]; }; -static int adt7470_attach_adapter(struct i2c_adapter *adapter); -static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind); -static int adt7470_detach_client(struct i2c_client *client); +static int adt7470_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7470_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7470_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7470_id[] = { + { "adt7470", adt7470 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7470_id); static struct i2c_driver adt7470_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adt7470", }, - .attach_adapter = adt7470_attach_adapter, - .detach_client = adt7470_detach_client, + .probe = adt7470_probe, + .remove = adt7470_remove, + .id_table = adt7470_id, + .detect = adt7470_detect, + .address_data = &addr_data, }; /* @@ -1004,64 +1015,52 @@ static struct attribute *adt7470_attr[] = NULL }; -static int adt7470_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adt7470_detect); -} - -static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7470_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adt7470_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &adt7470_driver; - - i2c_set_clientdata(client, data); - - mutex_init(&data->lock); + return -ENODEV; if (kind <= 0) { int vendor, device, revision; vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); - if (vendor != ADT7470_VENDOR) { - err = -ENODEV; - goto exit_free; - } + if (vendor != ADT7470_VENDOR) + return -ENODEV; device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); - if (device != ADT7470_DEVICE) { - err = -ENODEV; - goto exit_free; - } + if (device != ADT7470_DEVICE) + return -ENODEV; revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION); - if (revision != ADT7470_REVISION) { - err = -ENODEV; - goto exit_free; - } + if (revision != ADT7470_REVISION) + return -ENODEV; } else dev_dbg(&adapter->dev, "detection forced\n"); - strlcpy(client->name, "adt7470", I2C_NAME_SIZE); + strlcpy(info->type, "adt7470", I2C_NAME_SIZE); - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int adt7470_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7470_data *data; + int err; + + data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); dev_info(&client->dev, "%s chip found\n", client->name); @@ -1071,7 +1070,7 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ data->attrs.attrs = adt7470_attr; if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -1083,21 +1082,18 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adt7470_detach_client(struct i2c_client *client) +static int adt7470_remove(struct i2c_client *client) { struct adt7470_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index c1009d6f979..ce4a7cb5a11 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -143,7 +143,6 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) struct adt7473_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; struct mutex lock; @@ -178,16 +177,28 @@ struct adt7473_data { u8 max_duty_at_overheat; }; -static int adt7473_attach_adapter(struct i2c_adapter *adapter); -static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind); -static int adt7473_detach_client(struct i2c_client *client); +static int adt7473_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7473_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7473_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7473_id[] = { + { "adt7473", adt7473 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7473_id); static struct i2c_driver adt7473_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adt7473", }, - .attach_adapter = adt7473_attach_adapter, - .detach_client = adt7473_detach_client, + .probe = adt7473_probe, + .remove = adt7473_remove, + .id_table = adt7473_id, + .detect = adt7473_detect, + .address_data = &addr_data, }; /* @@ -309,6 +320,9 @@ no_sensor_update: ADT7473_REG_PWM_BHVR(i)); } + i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); + data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); + data->limits_last_updated = local_jiffies; data->limits_valid = 1; @@ -1039,66 +1053,52 @@ static struct attribute *adt7473_attr[] = NULL }; -static int adt7473_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7473_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adt7473_detect); -} - -static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct adt7473_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &adt7473_driver; - - i2c_set_clientdata(client, data); - - mutex_init(&data->lock); + return -ENODEV; if (kind <= 0) { int vendor, device, revision; vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); - if (vendor != ADT7473_VENDOR) { - err = -ENODEV; - goto exit_free; - } + if (vendor != ADT7473_VENDOR) + return -ENODEV; device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); - if (device != ADT7473_DEVICE) { - err = -ENODEV; - goto exit_free; - } + if (device != ADT7473_DEVICE) + return -ENODEV; revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION); - if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) { - err = -ENODEV; - goto exit_free; - } + if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) + return -ENODEV; } else dev_dbg(&adapter->dev, "detection forced\n"); - strlcpy(client->name, "adt7473", I2C_NAME_SIZE); + strlcpy(info->type, "adt7473", I2C_NAME_SIZE); - err = i2c_attach_client(client); - if (err) - goto exit_free; + return 0; +} + +static int adt7473_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7473_data *data; + int err; + + data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); dev_info(&client->dev, "%s chip found\n", client->name); @@ -1109,7 +1109,7 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) data->attrs.attrs = adt7473_attr; err = sysfs_create_group(&client->dev.kobj, &data->attrs); if (err) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -1121,21 +1121,18 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adt7473_detach_client(struct i2c_client *client) +static int adt7473_remove(struct i2c_client *client) { struct adt7473_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c index a112a03e8f2..fbefa82a015 100644 --- a/drivers/hwmon/ams/ams-core.c +++ b/drivers/hwmon/ams/ams-core.c @@ -23,8 +23,8 @@ #include <linux/types.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/of_platform.h> #include <asm/pmac_pfunc.h> -#include <asm/of_platform.h> #include "ams.h" diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index fe2eea4d799..8a45a2e6ba8 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -176,10 +176,8 @@ static u8 DIV_TO_REG(long val) data is pointed to by client->data. The structure itself is dynamically allocated, at the same time the client itself is allocated. */ struct asb100_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex lock; - enum chips type; struct mutex update_lock; unsigned long last_updated; /* In jiffies */ @@ -206,18 +204,30 @@ struct asb100_data { static int asb100_read_value(struct i2c_client *client, u16 reg); static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val); -static int asb100_attach_adapter(struct i2c_adapter *adapter); -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind); -static int asb100_detach_client(struct i2c_client *client); +static int asb100_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int asb100_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int asb100_remove(struct i2c_client *client); static struct asb100_data *asb100_update_device(struct device *dev); static void asb100_init_client(struct i2c_client *client); +static const struct i2c_device_id asb100_id[] = { + { "asb100", asb100 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, asb100_id); + static struct i2c_driver asb100_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "asb100", }, - .attach_adapter = asb100_attach_adapter, - .detach_client = asb100_detach_client, + .probe = asb100_probe, + .remove = asb100_remove, + .id_table = asb100_id, + .detect = asb100_detect, + .address_data = &addr_data, }; /* 7 Voltages */ @@ -619,35 +629,13 @@ static const struct attribute_group asb100_group = { .attrs = asb100_attributes, }; -/* This function is called when: - asb100_driver is inserted (when this module is loaded), for each - available adapter - when a new adapter is inserted (and asb100_driver is still present) - */ -static int asb100_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, asb100_detect); -} - -static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +static int asb100_detect_subclients(struct i2c_client *client) { int i, id, err; + int address = client->addr; + unsigned short sc_addr[2]; struct asb100_data *data = i2c_get_clientdata(client); - - data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[0])) { - err = -ENOMEM; - goto ERROR_SC_0; - } - - data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[1])) { - err = -ENOMEM; - goto ERROR_SC_1; - } + struct i2c_adapter *adapter = client->adapter; id = i2c_adapter_id(adapter); @@ -665,37 +653,34 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, asb100_write_value(client, ASB100_REG_I2C_SUBADDR, (force_subclients[2] & 0x07) | ((force_subclients[3] & 0x07) << 4)); - data->lm75[0]->addr = force_subclients[2]; - data->lm75[1]->addr = force_subclients[3]; + sc_addr[0] = force_subclients[2]; + sc_addr[1] = force_subclients[3]; } else { int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR); - data->lm75[0]->addr = 0x48 + (val & 0x07); - data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07); + sc_addr[0] = 0x48 + (val & 0x07); + sc_addr[1] = 0x48 + ((val >> 4) & 0x07); } - if (data->lm75[0]->addr == data->lm75[1]->addr) { + if (sc_addr[0] == sc_addr[1]) { dev_err(&client->dev, "duplicate addresses 0x%x " - "for subclients\n", data->lm75[0]->addr); + "for subclients\n", sc_addr[0]); err = -ENODEV; goto ERROR_SC_2; } - for (i = 0; i <= 1; i++) { - i2c_set_clientdata(data->lm75[i], NULL); - data->lm75[i]->adapter = adapter; - data->lm75[i]->driver = &asb100_driver; - strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE); - } - - if ((err = i2c_attach_client(data->lm75[0]))) { + data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]); + if (!data->lm75[0]) { dev_err(&client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[0]->addr); + "at address 0x%x failed.\n", 1, sc_addr[0]); + err = -ENOMEM; goto ERROR_SC_2; } - if ((err = i2c_attach_client(data->lm75[1]))) { + data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]); + if (!data->lm75[1]) { dev_err(&client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[1]->addr); + "at address 0x%x failed.\n", 2, sc_addr[1]); + err = -ENOMEM; goto ERROR_SC_3; } @@ -703,55 +688,31 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ ERROR_SC_3: - i2c_detach_client(data->lm75[0]); + i2c_unregister_device(data->lm75[0]); ERROR_SC_2: - kfree(data->lm75[1]); -ERROR_SC_1: - kfree(data->lm75[0]); -ERROR_SC_0: return err; } -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int asb100_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - int err; - struct i2c_client *client; - struct asb100_data *data; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("asb100.o: detect failed, " "smbus byte data not supported!\n"); - err = -ENODEV; - goto ERROR0; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access asb100_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) { - pr_debug("asb100.o: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto ERROR0; - } - - client = &data->client; - mutex_init(&data->lock); - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &asb100_driver; - - /* Now, we do the remaining detection. */ - /* The chip may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the chip will be reset to the right bank. */ if (kind < 0) { - int val1 = asb100_read_value(client, ASB100_REG_BANK); - int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN); + int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK); + int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); /* If we're in bank 0 */ if ((!(val1 & 0x07)) && @@ -761,48 +722,60 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) ((val1 & 0x80) && (val2 != 0x06)))) { pr_debug("asb100.o: detect failed, " "bad chip id 0x%02x!\n", val2); - err = -ENODEV; - goto ERROR1; + return -ENODEV; } } /* kind < 0 */ /* We have either had a force parameter, or we have already detected Winbond. Put it now into bank 0 and Vendor ID High Byte */ - asb100_write_value(client, ASB100_REG_BANK, - (asb100_read_value(client, ASB100_REG_BANK) & 0x78) | 0x80); + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, + (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78) + | 0x80); /* Determine the chip type. */ if (kind <= 0) { - int val1 = asb100_read_value(client, ASB100_REG_WCHIPID); - int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN); + int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID); + int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); if ((val1 == 0x31) && (val2 == 0x06)) kind = asb100; else { if (kind == 0) - dev_warn(&client->dev, "ignoring " + dev_warn(&adapter->dev, "ignoring " "'force' parameter for unknown chip " "at adapter %d, address 0x%02x.\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR1; + i2c_adapter_id(adapter), client->addr); + return -ENODEV; } } - /* Fill in remaining client fields and put it into the global list */ - strlcpy(client->name, "asb100", I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + strlcpy(info->type, "asb100", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto ERROR1; + return 0; +} + +static int asb100_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err; + struct asb100_data *data; + + data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL); + if (!data) { + pr_debug("asb100.o: probe failed, kzalloc failed!\n"); + err = -ENOMEM; + goto ERROR0; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + mutex_init(&data->update_lock); /* Attach secondary lm75 clients */ - if ((err = asb100_detect_subclients(adapter, address, kind, - client))) - goto ERROR2; + err = asb100_detect_subclients(client); + if (err) + goto ERROR1; /* Initialize the chip */ asb100_init_client(client); @@ -827,39 +800,25 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) ERROR4: sysfs_remove_group(&client->dev.kobj, &asb100_group); ERROR3: - i2c_detach_client(data->lm75[1]); - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[1]); - kfree(data->lm75[0]); -ERROR2: - i2c_detach_client(client); + i2c_unregister_device(data->lm75[1]); + i2c_unregister_device(data->lm75[0]); ERROR1: kfree(data); ERROR0: return err; } -static int asb100_detach_client(struct i2c_client *client) +static int asb100_remove(struct i2c_client *client) { struct asb100_data *data = i2c_get_clientdata(client); - int err; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &asb100_group); - } - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &asb100_group); - /* main client */ - if (data) - kfree(data); + i2c_unregister_device(data->lm75[1]); + i2c_unregister_device(data->lm75[0]); - /* subclient */ - else - kfree(client); + kfree(data); return 0; } diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 01c17e387f0..d191118ba0c 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -46,21 +46,32 @@ static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; I2C_CLIENT_INSMOD_1(atxp1); -static int atxp1_attach_adapter(struct i2c_adapter * adapter); -static int atxp1_detach_client(struct i2c_client * client); +static int atxp1_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int atxp1_remove(struct i2c_client *client); static struct atxp1_data * atxp1_update_device(struct device *dev); -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind); +static int atxp1_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); + +static const struct i2c_device_id atxp1_id[] = { + { "atxp1", atxp1 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atxp1_id); static struct i2c_driver atxp1_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "atxp1", }, - .attach_adapter = atxp1_attach_adapter, - .detach_client = atxp1_detach_client, + .probe = atxp1_probe, + .remove = atxp1_remove, + .id_table = atxp1_id, + .detect = atxp1_detect, + .address_data = &addr_data, }; struct atxp1_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; unsigned long last_updated; @@ -263,35 +274,16 @@ static const struct attribute_group atxp1_group = { }; -static int atxp1_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int atxp1_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, &atxp1_detect); -}; + struct i2c_adapter *adapter = new_client->adapter; -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client * new_client; - struct atxp1_data * data; - int err = 0; u8 temp; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &atxp1_driver; - new_client->flags = 0; + return -ENODEV; /* Detect ATXP1, checking if vendor ID registers are all zero */ if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && @@ -305,35 +297,46 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && (i2c_smbus_read_byte_data(new_client, 0x11) == temp) )) - goto exit_free; + return -ENODEV; } /* Get VRM */ - data->vrm = vid_which_vrm(); + temp = vid_which_vrm(); - if ((data->vrm != 90) && (data->vrm != 91)) { - dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", - data->vrm / 10, data->vrm % 10); - goto exit_free; + if ((temp != 90) && (temp != 91)) { + dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n", + temp / 10, temp % 10); + return -ENODEV; } - strncpy(new_client->name, "atxp1", I2C_NAME_SIZE); - - data->valid = 0; + strlcpy(info->type, "atxp1", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - err = i2c_attach_client(new_client); +static int atxp1_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct atxp1_data *data; + int err; - if (err) - { - dev_err(&new_client->dev, "Attach client error.\n"); - goto exit_free; + data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } + /* Get VRM */ + data->vrm = vid_which_vrm(); + + i2c_set_clientdata(new_client, data); + data->valid = 0; + + mutex_init(&data->update_lock); + /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -348,30 +351,22 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &atxp1_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; }; -static int atxp1_detach_client(struct i2c_client * client) +static int atxp1_remove(struct i2c_client *client) { struct atxp1_data * data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &atxp1_group); - err = i2c_detach_client(client); - - if (err) - dev_err(&client->dev, "Failed to detach client.\n"); - else - kfree(data); + kfree(data); - return err; + return 0; }; static int __init atxp1_init(void) diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5f300ffed65..7415381601c 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -72,7 +72,6 @@ static const u8 DS1621_REG_TEMP[3] = { /* Each client has this additional data */ struct ds1621_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -82,20 +81,32 @@ struct ds1621_data { u8 conf; /* Register encoding, combined */ }; -static int ds1621_attach_adapter(struct i2c_adapter *adapter); -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind); +static int ds1621_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ds1621_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void ds1621_init_client(struct i2c_client *client); -static int ds1621_detach_client(struct i2c_client *client); +static int ds1621_remove(struct i2c_client *client); static struct ds1621_data *ds1621_update_client(struct device *dev); +static const struct i2c_device_id ds1621_id[] = { + { "ds1621", ds1621 }, + { "ds1625", ds1621 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ds1621_id); + /* This is the driver that will be inserted */ static struct i2c_driver ds1621_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "ds1621", }, - .attach_adapter = ds1621_attach_adapter, - .detach_client = ds1621_detach_client, + .probe = ds1621_probe, + .remove = ds1621_remove, + .id_table = ds1621_id, + .detect = ds1621_detect, + .address_data = &addr_data, }; /* All registers are word-sized, except for the configuration register. @@ -199,40 +210,18 @@ static const struct attribute_group ds1621_group = { }; -static int ds1621_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ds1621_detect); -} - -/* This function is called by i2c_probe */ -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ds1621_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int conf, temp; - struct i2c_client *client; - struct ds1621_data *data; - int i, err = 0; + int i; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_WRITE_BYTE)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &ds1621_driver; + return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ if (kind < 0) { @@ -241,29 +230,41 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, improbable in our case. */ conf = ds1621_read_value(client, DS1621_REG_CONF); if (conf & DS1621_REG_CONFIG_NVB) - goto exit_free; + return -ENODEV; /* The 7 lowest bits of a temperature should always be 0. */ - for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) { temp = ds1621_read_value(client, DS1621_REG_TEMP[i]); if (temp & 0x007f) - goto exit_free; + return -ENODEV; } } - /* Fill in remaining client fields and put it into the global list */ - strlcpy(client->name, "ds1621", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "ds1621", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int ds1621_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ds1621_data *data; + int err; + + data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the DS1621 chip */ ds1621_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -275,25 +276,19 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, exit_remove_files: sysfs_remove_group(&client->dev.kobj, &ds1621_group); - exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int ds1621_detach_client(struct i2c_client *client) +static int ds1621_remove(struct i2c_client *client) { struct ds1621_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ds1621_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index dc1f30e432e..1692de36996 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -87,7 +87,6 @@ I2C_CLIENT_INSMOD_2(f75373, f75375); struct f75375_data { unsigned short addr; - struct i2c_client *client; struct device *hwmon_dev; const char *name; @@ -114,21 +113,12 @@ struct f75375_data { s8 temp_max_hyst[2]; }; -static int f75375_attach_adapter(struct i2c_adapter *adapter); -static int f75375_detect(struct i2c_adapter *adapter, int address, int kind); -static int f75375_detach_client(struct i2c_client *client); +static int f75375_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static int f75375_probe(struct i2c_client *client, const struct i2c_device_id *id); static int f75375_remove(struct i2c_client *client); -static struct i2c_driver f75375_legacy_driver = { - .driver = { - .name = "f75375_legacy", - }, - .attach_adapter = f75375_attach_adapter, - .detach_client = f75375_detach_client, -}; - static const struct i2c_device_id f75375_id[] = { { "f75373", f75373 }, { "f75375", f75375 }, @@ -137,12 +127,15 @@ static const struct i2c_device_id f75375_id[] = { MODULE_DEVICE_TABLE(i2c, f75375_id); static struct i2c_driver f75375_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "f75375", }, .probe = f75375_probe, .remove = f75375_remove, .id_table = f75375_id, + .detect = f75375_detect, + .address_data = &addr_data, }; static inline int f75375_read8(struct i2c_client *client, u8 reg) @@ -607,22 +600,6 @@ static const struct attribute_group f75375_group = { .attrs = f75375_attributes, }; -static int f75375_detach_client(struct i2c_client *client) -{ - int err; - - f75375_remove(client); - err = i2c_detach_client(client); - if (err) { - dev_err(&client->dev, - "Client deregistration failed, " - "client not detached.\n"); - return err; - } - kfree(client); - return 0; -} - static void f75375_init(struct i2c_client *client, struct f75375_data *data, struct f75375s_platform_data *f75375s_pdata) { @@ -651,7 +628,6 @@ static int f75375_probe(struct i2c_client *client, return -ENOMEM; i2c_set_clientdata(client, data); - data->client = client; mutex_init(&data->update_lock); data->kind = id->driver_data; @@ -700,29 +676,13 @@ static int f75375_remove(struct i2c_client *client) return 0; } -static int f75375_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, f75375_detect); -} - -/* This function is called by i2c_probe */ -static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int f75375_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; u8 version = 0; - int err = 0; const char *name = ""; - struct i2c_device_id id; - - if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - client->addr = address; - client->adapter = adapter; - client->driver = &f75375_legacy_driver; if (kind < 0) { u16 vendid = f75375_read16(client, F75375_REG_VENDOR); @@ -736,7 +696,7 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) dev_err(&adapter->dev, "failed,%02X,%02X,%02X\n", chipid, version, vendid); - goto exit_free; + return -ENODEV; } } @@ -746,43 +706,18 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) name = "f75373"; } dev_info(&adapter->dev, "found %s version: %02X\n", name, version); - strlcpy(client->name, name, I2C_NAME_SIZE); - - if ((err = i2c_attach_client(client))) - goto exit_free; - - strlcpy(id.name, name, I2C_NAME_SIZE); - id.driver_data = kind; - if ((err = f75375_probe(client, &id)) < 0) - goto exit_detach; + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; - -exit_detach: - i2c_detach_client(client); -exit_free: - kfree(client); -exit: - return err; } static int __init sensors_f75375_init(void) { - int status; - status = i2c_add_driver(&f75375_driver); - if (status) - return status; - - status = i2c_add_driver(&f75375_legacy_driver); - if (status) - i2c_del_driver(&f75375_driver); - - return status; + return i2c_add_driver(&f75375_driver); } static void __exit sensors_f75375_exit(void) { - i2c_del_driver(&f75375_legacy_driver); i2c_del_driver(&f75375_driver); } diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index ed26b66e083..12c70e402cb 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -106,9 +106,11 @@ I2C_CLIENT_INSMOD_1(fscher); * Functions declaration */ -static int fscher_attach_adapter(struct i2c_adapter *adapter); -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscher_detach_client(struct i2c_client *client); +static int fscher_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fscher_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fscher_remove(struct i2c_client *client); static struct fscher_data *fscher_update_device(struct device *dev); static void fscher_init_client(struct i2c_client *client); @@ -119,12 +121,21 @@ static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); * Driver data (common to all clients) */ +static const struct i2c_device_id fscher_id[] = { + { "fscher", fscher }, + { } +}; + static struct i2c_driver fscher_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "fscher", }, - .attach_adapter = fscher_attach_adapter, - .detach_client = fscher_detach_client, + .probe = fscher_probe, + .remove = fscher_remove, + .id_table = fscher_id, + .detect = fscher_detect, + .address_data = &addr_data, }; /* @@ -132,7 +143,6 @@ static struct i2c_driver fscher_driver = { */ struct fscher_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -283,38 +293,14 @@ static const struct attribute_group fscher_group = { * Real code */ -static int fscher_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fscher_detect); -} - -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int fscher_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct fscher_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - * Hermes-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscher_driver; - new_client->flags = 0; + return -ENODEV; /* Do the remaining detection unless force or force_fscher parameter */ if (kind < 0) { @@ -324,24 +310,35 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ || (i2c_smbus_read_byte_data(new_client, FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ - goto exit_free; + return -ENODEV; + } + + strlcpy(info->type, "fscher", I2C_NAME_SIZE); + + return 0; +} + +static int fscher_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct fscher_data *data; + int err; + + data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* Fill in the remaining client fields and put it into the - * global list */ - strlcpy(new_client->name, "fscher", I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - fscher_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -353,25 +350,19 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &fscher_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int fscher_detach_client(struct i2c_client *client) +static int fscher_remove(struct i2c_client *client) { struct fscher_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &fscher_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index bd89d270a5e..96717036893 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -171,20 +171,37 @@ static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; * Functions declarations */ -static int fschmd_attach_adapter(struct i2c_adapter *adapter); -static int fschmd_detach_client(struct i2c_client *client); +static int fschmd_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fschmd_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fschmd_remove(struct i2c_client *client); static struct fschmd_data *fschmd_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id fschmd_id[] = { + { "fscpos", fscpos }, + { "fscher", fscher }, + { "fscscy", fscscy }, + { "fschrc", fschrc }, + { "fschmd", fschmd }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fschmd_id); + static struct i2c_driver fschmd_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = FSCHMD_NAME, }, - .attach_adapter = fschmd_attach_adapter, - .detach_client = fschmd_detach_client, + .probe = fschmd_probe, + .remove = fschmd_remove, + .id_table = fschmd_id, + .detect = fschmd_detect, + .address_data = &addr_data, }; /* @@ -192,7 +209,6 @@ static struct i2c_driver fschmd_driver = { */ struct fschmd_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; int kind; @@ -269,7 +285,7 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute v = SENSORS_LIMIT(v, -128, 127) + 128; mutex_lock(&data->update_lock); - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); data->temp_max[index] = v; mutex_unlock(&data->update_lock); @@ -346,14 +362,14 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute mutex_lock(&data->update_lock); - reg = i2c_smbus_read_byte_data(&data->client, + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_RIPPLE[data->kind][index]); /* bits 2..7 reserved => mask with 0x03 */ reg &= ~0x03; reg |= v; - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); data->fan_ripple[index] = reg; @@ -416,7 +432,7 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev, mutex_lock(&data->update_lock); - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_MIN[data->kind][index], v); data->fan_min[index] = v; @@ -448,14 +464,14 @@ static ssize_t store_alert_led(struct device *dev, mutex_lock(&data->update_lock); - reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL); + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); if (v) reg |= FSCHMD_CONTROL_ALERT_LED_MASK; else reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; - i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg); + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); data->global_control = reg; @@ -600,32 +616,15 @@ static void fschmd_dmi_decode(const struct dmi_header *header) } } -static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) +static int fschmd_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct fschmd_data *data; - u8 revision; - const char * const names[5] = { "Poseidon", "Hermes", "Scylla", - "Heracles", "Heimdall" }; + struct i2c_adapter *adapter = client->adapter; const char * const client_names[5] = { "fscpos", "fscher", "fscscy", "fschrc", "fschmd" }; - int i, err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - /* OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL))) - return -ENOMEM; - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &fschmd_driver; - mutex_init(&data->update_lock); + return -ENODEV; /* Detect & Identify the chip */ if (kind <= 0) { @@ -650,9 +649,31 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) else if (!strcmp(id, "HMD")) kind = fschmd; else - goto exit_free; + return -ENODEV; } + strlcpy(info->type, client_names[kind - 1], I2C_NAME_SIZE); + + return 0; +} + +static int fschmd_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fschmd_data *data; + u8 revision; + const char * const names[5] = { "Poseidon", "Hermes", "Scylla", + "Heracles", "Heimdall" }; + int i, err; + enum chips kind = id->driver_data; + + data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + if (kind == fscpos) { /* The Poseidon has hardwired temp limits, fill these in for the alarm resetting code */ @@ -674,11 +695,6 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ data->kind = kind - 1; - strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) { err = device_create_file(&client->dev, @@ -726,25 +742,14 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_detach: - fschmd_detach_client(client); /* will also free data for us */ - return err; - -exit_free: - kfree(data); + fschmd_remove(client); /* will also free data for us */ return err; } -static int fschmd_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fschmd_detect); -} - -static int fschmd_detach_client(struct i2c_client *client) +static int fschmd_remove(struct i2c_client *client) { struct fschmd_data *data = i2c_get_clientdata(client); - int i, err; + int i; /* Check if registered in case we're called from fschmd_detect to cleanup after an error */ @@ -760,9 +765,6 @@ static int fschmd_detach_client(struct i2c_client *client) device_remove_file(&client->dev, &fschmd_fan_attr[i].dev_attr); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 00f48484e54..8a7bcf500b4 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -87,9 +87,11 @@ static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; /* * Functions declaration */ -static int fscpos_attach_adapter(struct i2c_adapter *adapter); -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscpos_detach_client(struct i2c_client *client); +static int fscpos_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fscpos_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fscpos_remove(struct i2c_client *client); static int fscpos_read_value(struct i2c_client *client, u8 reg); static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); @@ -101,19 +103,27 @@ static void reset_fan_alarm(struct i2c_client *client, int nr); /* * Driver data (common to all clients) */ +static const struct i2c_device_id fscpos_id[] = { + { "fscpos", fscpos }, + { } +}; + static struct i2c_driver fscpos_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "fscpos", }, - .attach_adapter = fscpos_attach_adapter, - .detach_client = fscpos_detach_client, + .probe = fscpos_probe, + .remove = fscpos_remove, + .id_table = fscpos_id, + .detect = fscpos_detect, + .address_data = &addr_data, }; /* * Client data (each client gets its own) */ struct fscpos_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* 0 until following fields are valid */ @@ -470,39 +480,14 @@ static const struct attribute_group fscpos_group = { .attrs = fscpos_attributes, }; -static int fscpos_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fscpos_detect); -} - -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int fscpos_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct fscpos_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* - * OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access fscpos_{read,write}_value. - */ - - if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscpos_driver; - new_client->flags = 0; + return -ENODEV; /* Do the remaining detection unless force or force_fscpos parameter */ if (kind < 0) { @@ -512,22 +497,30 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) != 0x45) /* 'E' */ || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) != 0x47))/* 'G' */ - { - dev_dbg(&new_client->dev, "fscpos detection failed\n"); - goto exit_free; - } + return -ENODEV; } - /* Fill in the remaining client fields and put it in the global list */ - strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); + strlcpy(info->type, "fscpos", I2C_NAME_SIZE); + return 0; +} + +static int fscpos_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct fscpos_data *data; + int err; + + data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Inizialize the fscpos chip */ fscpos_init_client(new_client); @@ -536,7 +529,7 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -548,24 +541,19 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int fscpos_detach_client(struct i2c_client *client) +static int fscpos_remove(struct i2c_client *client) { struct fscpos_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &fscpos_group); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; } diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 33e9e8a8d1c..7820df45d77 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -114,7 +114,6 @@ static inline u8 FAN_TO_REG(long rpm, int div) /* Each client has this additional data */ struct gl518_data { - struct i2c_client client; struct device *hwmon_dev; enum chips type; @@ -138,21 +137,33 @@ struct gl518_data { u8 beep_enable; /* Boolean */ }; -static int gl518_attach_adapter(struct i2c_adapter *adapter); -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind); +static int gl518_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int gl518_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void gl518_init_client(struct i2c_client *client); -static int gl518_detach_client(struct i2c_client *client); +static int gl518_remove(struct i2c_client *client); static int gl518_read_value(struct i2c_client *client, u8 reg); static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value); static struct gl518_data *gl518_update_device(struct device *dev); +static const struct i2c_device_id gl518_id[] = { + { "gl518sm", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl518_id); + /* This is the driver that will be inserted */ static struct i2c_driver gl518_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "gl518sm", }, - .attach_adapter = gl518_attach_adapter, - .detach_client = gl518_detach_client, + .probe = gl518_probe, + .remove = gl518_remove, + .id_table = gl518_id, + .detect = gl518_detect, + .address_data = &addr_data, }; /* @@ -472,46 +483,23 @@ static const struct attribute_group gl518_group_r80 = { * Real code */ -static int gl518_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, gl518_detect); -} - -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int gl518_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i; - struct i2c_client *client; - struct gl518_data *data; - int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl518_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - - client->addr = address; - client->adapter = adapter; - client->driver = &gl518_driver; + return -ENODEV; /* Now, we do the remaining detection. */ if (kind < 0) { if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80) || (gl518_read_value(client, GL518_REG_CONF) & 0x80)) - goto exit_free; + return -ENODEV; } /* Determine the chip type. */ @@ -526,19 +514,32 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Ignoring 'force' parameter for unknown " "chip at adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - goto exit_free; + i2c_adapter_id(adapter), client->addr); + return -ENODEV; } } - /* Fill in the remaining client fields */ - strlcpy(client->name, "gl518sm", I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + strlcpy(info->type, "gl518sm", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int gl518_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gl518_data *data; + int err, revision; + + data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + revision = gl518_read_value(client, GL518_REG_REVISION); + data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00; + mutex_init(&data->update_lock); /* Initialize the GL518SM chip */ data->alarm_mask = 0xff; @@ -546,7 +547,7 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group))) - goto exit_detach; + goto exit_free; if (data->type == gl518sm_r80) if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group_r80))) @@ -564,8 +565,6 @@ exit_remove_files: sysfs_remove_group(&client->dev.kobj, &gl518_group); if (data->type == gl518sm_r80) sysfs_remove_group(&client->dev.kobj, &gl518_group_r80); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -591,19 +590,15 @@ static void gl518_init_client(struct i2c_client *client) gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); } -static int gl518_detach_client(struct i2c_client *client) +static int gl518_remove(struct i2c_client *client) { struct gl518_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &gl518_group); if (data->type == gl518sm_r80) sysfs_remove_group(&client->dev.kobj, &gl518_group_r80); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 8984ef14162..19616f2242b 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -79,26 +79,37 @@ static const u8 GL520_REG_TEMP_MAX_HYST[] = { 0x06, 0x18 }; * Function declarations */ -static int gl520_attach_adapter(struct i2c_adapter *adapter); -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind); +static int gl520_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int gl520_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void gl520_init_client(struct i2c_client *client); -static int gl520_detach_client(struct i2c_client *client); +static int gl520_remove(struct i2c_client *client); static int gl520_read_value(struct i2c_client *client, u8 reg); static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value); static struct gl520_data *gl520_update_device(struct device *dev); /* Driver data */ +static const struct i2c_device_id gl520_id[] = { + { "gl520sm", gl520sm }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl520_id); + static struct i2c_driver gl520_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "gl520sm", }, - .attach_adapter = gl520_attach_adapter, - .detach_client = gl520_detach_client, + .probe = gl520_probe, + .remove = gl520_remove, + .id_table = gl520_id, + .detect = gl520_detect, + .address_data = &addr_data, }; /* Client data */ struct gl520_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until the following fields are valid */ @@ -669,37 +680,15 @@ static const struct attribute_group gl520_group_opt = { * Real code */ -static int gl520_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, gl520_detect); -} - -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int gl520_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct gl520_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl520_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &gl520_driver; + return -ENODEV; /* Determine the chip type. */ if (kind < 0) { @@ -707,24 +696,36 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { dev_dbg(&client->dev, "Unknown chip type, skipping\n"); - goto exit_free; + return -ENODEV; } } - /* Fill in the remaining client fields */ - strlcpy(client->name, "gl520sm", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "gl520sm", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int gl520_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gl520_data *data; + int err; + + data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the GL520SM chip */ gl520_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group))) - goto exit_detach; + goto exit_free; if (data->two_temps) { if ((err = device_create_file(&client->dev, @@ -764,8 +765,6 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&client->dev.kobj, &gl520_group); sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -811,18 +810,14 @@ static void gl520_init_client(struct i2c_client *client) gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); } -static int gl520_detach_client(struct i2c_client *client) +static int gl520_remove(struct i2c_client *client) { struct gl520_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &gl520_group); sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index ea4fc657759..a4d92d246d5 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -515,16 +515,24 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"), { .ident = NULL } }; diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 6ac5c6f5358..f9e2ed621f7 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -111,6 +111,7 @@ struct i5k_amb_data { void __iomem *amb_mmio; struct i5k_device_attribute *attrs; unsigned int num_attrs; + unsigned long chipset_id; }; static ssize_t show_name(struct device *dev, struct device_attribute *devattr, @@ -382,7 +383,8 @@ err: return res; } -static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) +static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data, + unsigned long devid) { struct pci_dev *pcidev; u32 val32; @@ -390,7 +392,7 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) /* Find AMB register memory space */ pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_5000_ERR, + devid, NULL); if (!pcidev) return -ENODEV; @@ -409,6 +411,8 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) goto out; } + data->chipset_id = devid; + res = 0; out: pci_dev_put(pcidev); @@ -441,10 +445,30 @@ out: return res; } +static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data, + unsigned long channel) +{ + switch (data->chipset_id) { + case PCI_DEVICE_ID_INTEL_5000_ERR: + return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel; + case PCI_DEVICE_ID_INTEL_5400_ERR: + return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel; + default: + BUG(); + } +} + +static unsigned long chipset_ids[] = { + PCI_DEVICE_ID_INTEL_5000_ERR, + PCI_DEVICE_ID_INTEL_5400_ERR, + 0 +}; + static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; struct resource *reso; + int i; int res = -ENODEV; data = kzalloc(sizeof(*data), GFP_KERNEL); @@ -452,19 +476,24 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) return -ENOMEM; /* Figure out where the AMB registers live */ - res = i5k_find_amb_registers(data); + i = 0; + do { + res = i5k_find_amb_registers(data, chipset_ids[i]); + i++; + } while (res && chipset_ids[i]); + if (res) goto err; /* Copy the DIMM presence map for the first two channels */ res = i5k_channel_probe(&data->amb_present[0], - PCI_DEVICE_ID_INTEL_5000_FBD0); + i5k_channel_pci_id(data, 0)); if (res) goto err; /* Copy the DIMM presence map for the optional second two channels */ i5k_channel_probe(&data->amb_present[2], - PCI_DEVICE_ID_INTEL_5000_FBD1); + i5k_channel_pci_id(data, 1)); /* Set up resource regions */ reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c new file mode 100644 index 00000000000..c9416e65748 --- /dev/null +++ b/drivers/hwmon/ibmaem.c @@ -0,0 +1,1111 @@ +/* + * A hwmon driver for the IBM Active Energy Manager temperature/power sensors + * and capping functionality. + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/ipmi.h> +#include <linux/module.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/kdev_t.h> +#include <linux/spinlock.h> +#include <linux/idr.h> +#include <linux/sched.h> +#include <linux/platform_device.h> +#include <linux/math64.h> +#include <linux/time.h> + +#define REFRESH_INTERVAL (HZ) +#define IPMI_TIMEOUT (30 * HZ) +#define DRVNAME "aem" + +#define AEM_NETFN 0x2E + +#define AEM_FIND_FW_CMD 0x80 +#define AEM_ELEMENT_CMD 0x81 +#define AEM_FW_INSTANCE_CMD 0x82 + +#define AEM_READ_ELEMENT_CFG 0x80 +#define AEM_READ_BUFFER 0x81 +#define AEM_READ_REGISTER 0x82 +#define AEM_WRITE_REGISTER 0x83 +#define AEM_SET_REG_MASK 0x84 +#define AEM_CLEAR_REG_MASK 0x85 +#define AEM_READ_ELEMENT_CFG2 0x86 + +#define AEM_CONTROL_ELEMENT 0 +#define AEM_ENERGY_ELEMENT 1 +#define AEM_CLOCK_ELEMENT 4 +#define AEM_POWER_CAP_ELEMENT 7 +#define AEM_EXHAUST_ELEMENT 9 +#define AEM_POWER_ELEMENT 10 + +#define AEM_MODULE_TYPE_ID 0x0001 + +#define AEM2_NUM_ENERGY_REGS 2 +#define AEM2_NUM_PCAP_REGS 6 +#define AEM2_NUM_TEMP_REGS 2 +#define AEM2_NUM_SENSORS 14 + +#define AEM1_NUM_ENERGY_REGS 1 +#define AEM1_NUM_SENSORS 3 + +/* AEM 2.x has more energy registers */ +#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS +/* AEM 2.x needs more sensor files */ +#define AEM_NUM_SENSORS AEM2_NUM_SENSORS + +#define POWER_CAP 0 +#define POWER_CAP_MAX_HOTPLUG 1 +#define POWER_CAP_MAX 2 +#define POWER_CAP_MIN_WARNING 3 +#define POWER_CAP_MIN 4 +#define POWER_AUX 5 + +#define AEM_DEFAULT_POWER_INTERVAL 1000 +#define AEM_MIN_POWER_INTERVAL 200 +#define UJ_PER_MJ 1000L + +static DEFINE_IDR(aem_idr); +static DEFINE_SPINLOCK(aem_idr_lock); + +static struct device_driver aem_driver = { + .name = DRVNAME, + .bus = &platform_bus_type, +}; + +struct aem_ipmi_data { + struct completion read_complete; + struct ipmi_addr address; + ipmi_user_t user; + int interface; + + struct kernel_ipmi_msg tx_message; + long tx_msgid; + + void *rx_msg_data; + unsigned short rx_msg_len; + unsigned char rx_result; + int rx_recv_type; + + struct device *bmc_device; +}; + +struct aem_ro_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + int index; +}; + +struct aem_rw_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + ssize_t (*set)(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count); + int index; +}; + +struct aem_data { + struct list_head list; + + struct device *hwmon_dev; + struct platform_device *pdev; + struct mutex lock; + char valid; + unsigned long last_updated; /* In jiffies */ + u8 ver_major; + u8 ver_minor; + u8 module_handle; + int id; + struct aem_ipmi_data ipmi; + + /* Function to update sensors */ + void (*update)(struct aem_data *data); + + /* + * AEM 1.x sensors: + * Available sensors: + * Energy meter + * Power meter + * + * AEM 2.x sensors: + * Two energy meters + * Two power meters + * Two temperature sensors + * Six power cap registers + */ + + /* sysfs attrs */ + struct sensor_device_attribute sensors[AEM_NUM_SENSORS]; + + /* energy use in mJ */ + u64 energy[AEM_NUM_ENERGY_REGS]; + + /* power sampling interval in ms */ + unsigned long power_period[AEM_NUM_ENERGY_REGS]; + + /* Everything past here is for AEM2 only */ + + /* power caps in dW */ + u16 pcap[AEM2_NUM_PCAP_REGS]; + + /* exhaust temperature in C */ + u8 temp[AEM2_NUM_TEMP_REGS]; +}; + +/* Data structures returned by the AEM firmware */ +struct aem_iana_id { + u8 bytes[3]; +}; +static struct aem_iana_id system_x_id = { + .bytes = {0x4D, 0x4F, 0x00} +}; + +/* These are used to find AEM1 instances */ +struct aem_find_firmware_req { + struct aem_iana_id id; + u8 rsvd; + __be16 index; + __be16 module_type_id; +} __packed; + +struct aem_find_firmware_resp { + struct aem_iana_id id; + u8 num_instances; +} __packed; + +/* These are used to find AEM2 instances */ +struct aem_find_instance_req { + struct aem_iana_id id; + u8 instance_number; + __be16 module_type_id; +} __packed; + +struct aem_find_instance_resp { + struct aem_iana_id id; + u8 num_instances; + u8 major; + u8 minor; + u8 module_handle; + u16 record_id; +} __packed; + +/* These are used to query sensors */ +struct aem_read_sensor_req { + struct aem_iana_id id; + u8 module_handle; + u8 element; + u8 subcommand; + u8 reg; + u8 rx_buf_size; +} __packed; + +struct aem_read_sensor_resp { + struct aem_iana_id id; + u8 bytes[0]; +} __packed; + +/* Data structures to talk to the IPMI layer */ +struct aem_driver_data { + struct list_head aem_devices; + struct ipmi_smi_watcher bmc_events; + struct ipmi_user_hndl ipmi_hndlrs; +}; + +static void aem_register_bmc(int iface, struct device *dev); +static void aem_bmc_gone(int iface); +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); + +static void aem_remove_sensors(struct aem_data *data); +static int aem_init_aem1(struct aem_ipmi_data *probe); +static int aem_init_aem2(struct aem_ipmi_data *probe); +static int aem1_find_sensors(struct aem_data *data); +static int aem2_find_sensors(struct aem_data *data); +static void update_aem1_sensors(struct aem_data *data); +static void update_aem2_sensors(struct aem_data *data); + +static struct aem_driver_data driver_data = { + .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices), + .bmc_events = { + .owner = THIS_MODULE, + .new_smi = aem_register_bmc, + .smi_gone = aem_bmc_gone, + }, + .ipmi_hndlrs = { + .ipmi_recv_hndl = aem_msg_handler, + }, +}; + +/* Functions to talk to the IPMI layer */ + +/* Initialize IPMI address, message buffers and user data */ +static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface, + struct device *bmc) +{ + int err; + + init_completion(&data->read_complete); + data->bmc_device = bmc; + + /* Initialize IPMI address */ + data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + data->address.channel = IPMI_BMC_CHANNEL; + data->address.data[0] = 0; + data->interface = iface; + + /* Initialize message buffers */ + data->tx_msgid = 0; + data->tx_message.netfn = AEM_NETFN; + + /* Create IPMI messaging interface user */ + err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs, + data, &data->user); + if (err < 0) { + dev_err(bmc, "Unable to register user with IPMI " + "interface %d\n", data->interface); + return -EACCES; + } + + return 0; +} + +/* Send an IPMI command */ +static int aem_send_message(struct aem_ipmi_data *data) +{ + int err; + + err = ipmi_validate_addr(&data->address, sizeof(data->address)); + if (err) + goto out; + + data->tx_msgid++; + err = ipmi_request_settime(data->user, &data->address, data->tx_msgid, + &data->tx_message, data, 0, 0, 0); + if (err) + goto out1; + + return 0; +out1: + dev_err(data->bmc_device, "request_settime=%x\n", err); + return err; +out: + dev_err(data->bmc_device, "validate_addr=%x\n", err); + return err; +} + +/* Dispatch IPMI messages to callers */ +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) +{ + unsigned short rx_len; + struct aem_ipmi_data *data = user_msg_data; + + if (msg->msgid != data->tx_msgid) { + dev_err(data->bmc_device, "Mismatch between received msgid " + "(%02x) and transmitted msgid (%02x)!\n", + (int)msg->msgid, + (int)data->tx_msgid); + ipmi_free_recv_msg(msg); + return; + } + + data->rx_recv_type = msg->recv_type; + if (msg->msg.data_len > 0) + data->rx_result = msg->msg.data[0]; + else + data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE; + + if (msg->msg.data_len > 1) { + rx_len = msg->msg.data_len - 1; + if (data->rx_msg_len < rx_len) + rx_len = data->rx_msg_len; + data->rx_msg_len = rx_len; + memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len); + } else + data->rx_msg_len = 0; + + ipmi_free_recv_msg(msg); + complete(&data->read_complete); +} + +/* ID functions */ + +/* Obtain an id */ +static int aem_idr_get(int *id) +{ + int i, err; + +again: + if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL))) + return -ENOMEM; + + spin_lock(&aem_idr_lock); + err = idr_get_new(&aem_idr, NULL, &i); + spin_unlock(&aem_idr_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = i & MAX_ID_MASK; + return 0; +} + +/* Release an object ID */ +static void aem_idr_put(int id) +{ + spin_lock(&aem_idr_lock); + idr_remove(&aem_idr, id); + spin_unlock(&aem_idr_lock); +} + +/* Sensor support functions */ + +/* Read a sensor value */ +static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, + void *buf, size_t size) +{ + int rs_size, res; + struct aem_read_sensor_req rs_req; + struct aem_read_sensor_resp *rs_resp; + struct aem_ipmi_data *ipmi = &data->ipmi; + + /* AEM registers are 1, 2, 4 or 8 bytes */ + switch (size) { + case 1: + case 2: + case 4: + case 8: + break; + default: + return -EINVAL; + } + + rs_req.id = system_x_id; + rs_req.module_handle = data->module_handle; + rs_req.element = elt; + rs_req.subcommand = AEM_READ_REGISTER; + rs_req.reg = reg; + rs_req.rx_buf_size = size; + + ipmi->tx_message.cmd = AEM_ELEMENT_CMD; + ipmi->tx_message.data = (char *)&rs_req; + ipmi->tx_message.data_len = sizeof(rs_req); + + rs_size = sizeof(*rs_resp) + size; + rs_resp = kzalloc(rs_size, GFP_KERNEL); + if (!rs_resp) + return -ENOMEM; + + ipmi->rx_msg_data = rs_resp; + ipmi->rx_msg_len = rs_size; + + aem_send_message(ipmi); + + res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (ipmi->rx_result || ipmi->rx_msg_len != rs_size || + memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) { + kfree(rs_resp); + return -ENOENT; + } + + switch (size) { + case 1: { + u8 *x = buf; + *x = rs_resp->bytes[0]; + break; + } + case 2: { + u16 *x = buf; + *x = be16_to_cpup((__be16 *)rs_resp->bytes); + break; + } + case 4: { + u32 *x = buf; + *x = be32_to_cpup((__be32 *)rs_resp->bytes); + break; + } + case 8: { + u64 *x = buf; + *x = be64_to_cpup((__be64 *)rs_resp->bytes); + break; + } + } + + return 0; +} + +/* Update AEM energy registers */ +static void update_aem_energy(struct aem_data *data) +{ + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8); + if (data->ver_major < 2) + return; + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8); +} + +/* Update all AEM1 sensors */ +static void update_aem1_sensors(struct aem_data *data) +{ + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); +out: + mutex_unlock(&data->lock); +} + +/* Update all AEM2 sensors */ +static void update_aem2_sensors(struct aem_data *data) +{ + int i; + + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1); + + for (i = POWER_CAP; i <= POWER_AUX; i++) + aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i, + &data->pcap[i], 2); +out: + mutex_unlock(&data->lock); +} + +/* Delete an AEM instance */ +static void aem_delete(struct aem_data *data) +{ + list_del(&data->list); + aem_remove_sensors(data); + hwmon_device_unregister(data->hwmon_dev); + ipmi_destroy_user(data->ipmi.user); + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); + aem_idr_put(data->id); + kfree(data); +} + +/* Probe functions for AEM1 devices */ + +/* Retrieve version and module handle for an AEM1 instance */ +static int aem_find_aem1_count(struct aem_ipmi_data *data) +{ + int res; + struct aem_find_firmware_req ff_req; + struct aem_find_firmware_resp ff_resp; + + ff_req.id = system_x_id; + ff_req.index = 0; + ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FIND_FW_CMD; + data->tx_message.data = (char *)&ff_req; + data->tx_message.data_len = sizeof(ff_req); + + data->rx_msg_data = &ff_resp; + data->rx_msg_len = sizeof(ff_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) || + memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return ff_resp.num_instances; +} + +/* Find and initialize one AEM1 instance */ +static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = 1; + data->ver_minor = 0; + data->module_handle = module_handle; + for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem1_sensors; + + /* Find sensors */ + if (aem1_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM1 instances */ +static int aem_init_aem1(struct aem_ipmi_data *probe) +{ + int num, i, err; + + num = aem_find_aem1_count(probe); + for (i = 0; i < num; i++) { + err = aem_init_aem1_inst(probe, i); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM1 0x%X\n", + err, i); + return err; + } + } + + return 0; +} + +/* Probe functions for AEM2 devices */ + +/* Retrieve version and module handle for an AEM2 instance */ +static int aem_find_aem2(struct aem_ipmi_data *data, + struct aem_find_instance_resp *fi_resp, + int instance_num) +{ + int res; + struct aem_find_instance_req fi_req; + + fi_req.id = system_x_id; + fi_req.instance_number = instance_num; + fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FW_INSTANCE_CMD; + data->tx_message.data = (char *)&fi_req; + data->tx_message.data_len = sizeof(fi_req); + + data->rx_msg_data = fi_resp; + data->rx_msg_len = sizeof(*fi_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) || + memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return 0; +} + +/* Find and initialize one AEM2 instance */ +static int aem_init_aem2_inst(struct aem_ipmi_data *probe, + struct aem_find_instance_resp *fi_resp) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = fi_resp->major; + data->ver_minor = fi_resp->minor; + data->module_handle = fi_resp->module_handle; + for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem2_sensors; + + /* Find sensors */ + if (aem2_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM2 instances */ +static int aem_init_aem2(struct aem_ipmi_data *probe) +{ + struct aem_find_instance_resp fi_resp; + int err; + int i = 0; + + while (!aem_find_aem2(probe, &fi_resp, i)) { + if (fi_resp.major != 2) { + dev_err(probe->bmc_device, "Unknown AEM v%d; please " + "report this to the maintainer.\n", + fi_resp.major); + i++; + continue; + } + err = aem_init_aem2_inst(probe, &fi_resp); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM2 0x%X\n", + err, fi_resp.module_handle); + return err; + } + i++; + } + + return 0; +} + +/* Probe a BMC for AEM firmware instances */ +static void aem_register_bmc(int iface, struct device *dev) +{ + struct aem_ipmi_data probe; + + if (aem_init_ipmi_data(&probe, iface, dev)) + return; + + /* Ignore probe errors; they won't cause problems */ + aem_init_aem1(&probe); + aem_init_aem2(&probe); + + ipmi_destroy_user(probe.user); +} + +/* Handle BMC deletion */ +static void aem_bmc_gone(int iface) +{ + struct aem_data *p1, *next1; + + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + if (p1->ipmi.interface == iface) + aem_delete(p1); +} + +/* sysfs support functions */ + +/* AEM device name */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major); +} +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* AEM device version */ +static ssize_t show_version(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor); +} +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0); + +/* Display power use */ +static ssize_t aem_show_power(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *data = dev_get_drvdata(dev); + u64 before, after, delta, time; + signed long leftover; + struct timespec b, a; + + mutex_lock(&data->lock); + update_aem_energy(data); + getnstimeofday(&b); + before = data->energy[attr->index]; + + leftover = schedule_timeout_interruptible( + msecs_to_jiffies(data->power_period[attr->index]) + ); + if (leftover) { + mutex_unlock(&data->lock); + return 0; + } + + update_aem_energy(data); + getnstimeofday(&a); + after = data->energy[attr->index]; + mutex_unlock(&data->lock); + + time = timespec_to_ns(&a) - timespec_to_ns(&b); + delta = (after - before) * UJ_PER_MJ; + + return sprintf(buf, "%llu\n", + (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time)); +} + +/* Display energy use */ +static ssize_t aem_show_energy(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%llu\n", + (unsigned long long)a->energy[attr->index] * 1000); +} + +/* Display power interval registers */ +static ssize_t aem_show_power_period(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%lu\n", a->power_period[attr->index]); +} + +/* Set power interval registers */ +static ssize_t aem_set_power_period(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + unsigned long temp; + int res; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + if (temp < AEM_MIN_POWER_INTERVAL) + return -EINVAL; + + mutex_lock(&a->lock); + a->power_period[attr->index] = temp; + mutex_unlock(&a->lock); + + return count; +} + +/* Discover sensors on an AEM device */ +static int aem_register_sensors(struct aem_data *data, + struct aem_ro_sensor_template *ro, + struct aem_rw_sensor_template *rw) +{ + struct device *dev = &data->pdev->dev; + struct sensor_device_attribute *sensors = data->sensors; + int err; + + /* Set up read-only sensors */ + while (ro->label) { + sensors->dev_attr.attr.name = ro->label; + sensors->dev_attr.attr.mode = S_IRUGO; + sensors->dev_attr.show = ro->show; + sensors->index = ro->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + ro++; + } + + /* Set up read-write sensors */ + while (rw->label) { + sensors->dev_attr.attr.name = rw->label; + sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; + sensors->dev_attr.show = rw->show; + sensors->dev_attr.store = rw->set; + sensors->index = rw->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + rw++; + } + + err = device_create_file(dev, &sensor_dev_attr_name.dev_attr); + if (err) + goto error; + err = device_create_file(dev, &sensor_dev_attr_version.dev_attr); + return err; + +error: + aem_remove_sensors(data); + return err; +} + +/* sysfs support functions for AEM2 sensors */ + +/* Display temperature use */ +static ssize_t aem2_show_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->temp[attr->index] * 1000); +} + +/* Display power-capping registers */ +static ssize_t aem2_show_pcap_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000); +} + +/* Remove sensors attached to an AEM device */ +static void aem_remove_sensors(struct aem_data *data) +{ + int i; + + for (i = 0; i < AEM_NUM_SENSORS; i++) { + if (!data->sensors[i].dev_attr.attr.name) + continue; + device_remove_file(&data->pdev->dev, + &data->sensors[i].dev_attr); + } + + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_name.dev_attr); + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_version.dev_attr); +} + +/* Sensor probe functions */ + +/* Description of AEM1 sensors */ +static struct aem_ro_sensor_template aem1_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"power1_average", aem_show_power, 0}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem1_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{NULL, NULL, NULL, 0}, +}; + +/* Description of AEM2 sensors */ +static struct aem_ro_sensor_template aem2_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"energy2_input", aem_show_energy, 1}, +{"power1_average", aem_show_power, 0}, +{"power2_average", aem_show_power, 1}, +{"temp1_input", aem2_show_temp, 0}, +{"temp2_input", aem2_show_temp, 1}, + +{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG}, +{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX}, +{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING}, +{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN}, + +{"power3_average", aem2_show_pcap_value, POWER_AUX}, +{"power_cap", aem2_show_pcap_value, POWER_CAP}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem2_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1}, +{NULL, NULL, NULL, 0}, +}; + +/* Set up AEM1 sensor attrs */ +static int aem1_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors); +} + +/* Set up AEM2 sensor attrs */ +static int aem2_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors); +} + +/* Module init/exit routines */ + +static int __init aem_init(void) +{ + int res; + + res = driver_register(&aem_driver); + if (res) { + printk(KERN_ERR "Can't register aem driver\n"); + return res; + } + + res = ipmi_smi_watcher_register(&driver_data.bmc_events); + if (res) + goto ipmi_reg_err; + return 0; + +ipmi_reg_err: + driver_unregister(&aem_driver); + return res; + +} + +static void __exit aem_exit(void) +{ + struct aem_data *p1, *next1; + + ipmi_smi_watcher_unregister(&driver_data.bmc_events); + driver_unregister(&aem_driver); + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + aem_delete(p1); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(aem_init); +module_exit(aem_exit); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 11628700808..3195a265f0e 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1,7 +1,7 @@ /* * lm63.c - driver for the National Semiconductor LM63 temperature sensor * with integrated fan control - * Copyright (C) 2004-2006 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org> * Based on the lm90 driver. * * The LM63 is a sensor chip made by National Semiconductor. It measures @@ -128,24 +128,36 @@ I2C_CLIENT_INSMOD_1(lm63); * Functions declaration */ -static int lm63_attach_adapter(struct i2c_adapter *adapter); -static int lm63_detach_client(struct i2c_client *client); +static int lm63_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm63_remove(struct i2c_client *client); static struct lm63_data *lm63_update_device(struct device *dev); -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm63_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm63_init_client(struct i2c_client *client); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm63_id[] = { + { "lm63", lm63 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm63_id); + static struct i2c_driver lm63_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm63", }, - .attach_adapter = lm63_attach_adapter, - .detach_client = lm63_detach_client, + .probe = lm63_probe, + .remove = lm63_remove, + .id_table = lm63_id, + .detect = lm63_detect, + .address_data = &addr_data, }; /* @@ -153,7 +165,6 @@ static struct i2c_driver lm63_driver = { */ struct lm63_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -411,43 +422,14 @@ static const struct attribute_group lm63_group_fan1 = { * Real code */ -static int lm63_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm63_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm63_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm63_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM63-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm63_driver; - new_client->flags = 0; - - /* Default to an LM63 if forced */ - if (kind == 0) - kind = lm63; + return -ENODEV; if (kind < 0) { /* must identify */ u8 man_id, chip_id, reg_config1, reg_config2; @@ -477,25 +459,38 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) dev_dbg(&adapter->dev, "Unsupported chip " "(man_id=0x%02X, chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); + strlcpy(info->type, "lm63", I2C_NAME_SIZE); + + return 0; +} + +static int lm63_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm63_data *data; + int err; + + data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM63 chip */ lm63_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm63_group))) - goto exit_detach; + goto exit_free; if (data->config & 0x04) { /* tachometer enabled */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm63_group_fan1))) @@ -513,8 +508,6 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm63_group); sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -556,18 +549,14 @@ static void lm63_init_client(struct i2c_client *client) (data->config_fan & 0x20) ? "manual" : "auto"); } -static int lm63_detach_client(struct i2c_client *client) +static int lm63_remove(struct i2c_client *client) { struct lm63_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm63_group); sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index fa769690515..de698dc7302 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client) the SMBus standard. */ static int lm75_read_value(struct i2c_client *client, u8 reg) { + int value; + if (reg == LM75_REG_CONF) return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); + + value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); } static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) @@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev) int i; dev_dbg(&client->dev, "Starting lm75 update\n"); - for (i = 0; i < ARRAY_SIZE(data->temp); i++) - data->temp[i] = lm75_read_value(client, - LM75_REG_TEMP[i]); + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + int status; + + status = lm75_read_value(client, LM75_REG_TEMP[i]); + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", + LM75_REG_TEMP[i], status); + else + data->temp[i] = status; + } data->last_updated = jiffies; data->valid = 1; } diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 36d5a8c3ad8..866b401ab6e 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -52,7 +52,6 @@ I2C_CLIENT_INSMOD_1(lm77); /* Each client has this additional data */ struct lm77_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; @@ -65,23 +64,35 @@ struct lm77_data { u8 alarms; }; -static int lm77_attach_adapter(struct i2c_adapter *adapter); -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm77_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm77_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm77_init_client(struct i2c_client *client); -static int lm77_detach_client(struct i2c_client *client); +static int lm77_remove(struct i2c_client *client); static u16 lm77_read_value(struct i2c_client *client, u8 reg); static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm77_data *lm77_update_device(struct device *dev); +static const struct i2c_device_id lm77_id[] = { + { "lm77", lm77 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm77_id); + /* This is the driver that will be inserted */ static struct i2c_driver lm77_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm77", }, - .attach_adapter = lm77_attach_adapter, - .detach_client = lm77_detach_client, + .probe = lm77_probe, + .remove = lm77_remove, + .id_table = lm77_id, + .detect = lm77_detect, + .address_data = &addr_data, }; /* straight from the datasheet */ @@ -215,13 +226,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2); static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1); -static int lm77_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm77_detect); -} - static struct attribute *lm77_attributes[] = { &dev_attr_temp1_input.attr, &dev_attr_temp1_crit.attr, @@ -240,32 +244,15 @@ static const struct attribute_group lm77_group = { .attrs = lm77_attributes, }; -/* This function is called by i2c_probe */ -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm77_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm77_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm77_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm77_driver; - new_client->flags = 0; + return -ENODEV; /* Here comes the remaining detection. Since the LM77 has no register dedicated to identification, we have to rely on the @@ -294,7 +281,7 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) || i2c_smbus_read_word_data(new_client, i + 3) != crit || i2c_smbus_read_word_data(new_client, i + 4) != min || i2c_smbus_read_word_data(new_client, i + 5) != max) - goto exit_free; + return -ENODEV; /* sign bits */ if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) @@ -302,51 +289,55 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) - goto exit_free; + return -ENODEV; /* unused bits */ if (conf & 0xe0) - goto exit_free; + return -ENODEV; /* 0x06 and 0x07 return the last read value */ cur = i2c_smbus_read_word_data(new_client, 0); if (i2c_smbus_read_word_data(new_client, 6) != cur || i2c_smbus_read_word_data(new_client, 7) != cur) - goto exit_free; + return -ENODEV; hyst = i2c_smbus_read_word_data(new_client, 2); if (i2c_smbus_read_word_data(new_client, 6) != hyst || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; + return -ENODEV; min = i2c_smbus_read_word_data(new_client, 4); if (i2c_smbus_read_word_data(new_client, 6) != min || i2c_smbus_read_word_data(new_client, 7) != min) - goto exit_free; + return -ENODEV; } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm77; + strlcpy(info->type, "lm77", I2C_NAME_SIZE); - if (kind == lm77) { - name = "lm77"; + return 0; +} + +static int lm77_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm77_data *data; + int err; + + data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM77 chip */ lm77_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -358,20 +349,17 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm77_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm77_detach_client(struct i2c_client *client) +static int lm77_remove(struct i2c_client *client) { struct lm77_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm77_group); - i2c_detach_client(client); kfree(data); return 0; } diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 26c91c9d476..bcffc189940 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -108,7 +108,6 @@ static inline long TEMP_FROM_REG(u16 temp) */ struct lm80_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -132,10 +131,12 @@ struct lm80_data { * Functions declaration */ -static int lm80_attach_adapter(struct i2c_adapter *adapter); -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm80_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm80_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm80_init_client(struct i2c_client *client); -static int lm80_detach_client(struct i2c_client *client); +static int lm80_remove(struct i2c_client *client); static struct lm80_data *lm80_update_device(struct device *dev); static int lm80_read_value(struct i2c_client *client, u8 reg); static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); @@ -144,12 +145,22 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); * Driver data (common to all clients) */ +static const struct i2c_device_id lm80_id[] = { + { "lm80", lm80 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm80_id); + static struct i2c_driver lm80_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm80", }, - .attach_adapter = lm80_attach_adapter, - .detach_client = lm80_detach_client, + .probe = lm80_probe, + .remove = lm80_remove, + .id_table = lm80_id, + .detect = lm80_detect, + .address_data = &addr_data, }; /* @@ -383,13 +394,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 13); * Real code */ -static int lm80_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm80_detect); -} - static struct attribute *lm80_attributes[] = { &sensor_dev_attr_in0_min.dev_attr.attr, &sensor_dev_attr_in1_min.dev_attr.attr, @@ -442,53 +446,46 @@ static const struct attribute_group lm80_group = { .attrs = lm80_attributes, }; -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm80_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i, cur; - struct i2c_client *client; - struct lm80_data *data; - int err = 0; - const char *name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm80_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &lm80_driver; + return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0) - goto error_free; + return -ENODEV; for (i = 0x2a; i <= 0x3d; i++) { cur = i2c_smbus_read_byte_data(client, i); if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur) || (i2c_smbus_read_byte_data(client, i + 0x80) != cur) || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur)) - goto error_free; + return -ENODEV; } - /* Determine the chip type - only one kind supported! */ - kind = lm80; - name = "lm80"; + strlcpy(info->type, "lm80", I2C_NAME_SIZE); - /* Fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error_free; +static int lm80_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm80_data *data; + int err; + + data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the LM80 chip */ lm80_init_client(client); @@ -499,7 +496,7 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &lm80_group))) - goto error_detach; + goto error_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -511,23 +508,18 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) error_remove: sysfs_remove_group(&client->dev.kobj, &lm80_group); -error_detach: - i2c_detach_client(client); error_free: kfree(data); exit: return err; } -static int lm80_detach_client(struct i2c_client *client) +static int lm80_remove(struct i2c_client *client) { struct lm80_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm80_group); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 6a8642fa25f..e59e2d1f080 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -118,21 +118,34 @@ static const u8 LM83_REG_W_HIGH[] = { * Functions declaration */ -static int lm83_attach_adapter(struct i2c_adapter *adapter); -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind); -static int lm83_detach_client(struct i2c_client *client); +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info); +static int lm83_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm83_remove(struct i2c_client *client); static struct lm83_data *lm83_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm83_id[] = { + { "lm83", lm83 }, + { "lm82", lm82 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm83_id); + static struct i2c_driver lm83_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm83", }, - .attach_adapter = lm83_attach_adapter, - .detach_client = lm83_detach_client, + .probe = lm83_probe, + .remove = lm83_remove, + .id_table = lm83_id, + .detect = lm83_detect, + .address_data = &addr_data, }; /* @@ -140,7 +153,6 @@ static struct i2c_driver lm83_driver = { */ struct lm83_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -278,40 +290,15 @@ static const struct attribute_group lm83_group_opt = { * Real code */ -static int lm83_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm83_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm83_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right after the - * LM83-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm83_driver; - new_client->flags = 0; + return -ENODEV; /* Now we do the detection and identification. A negative kind * means that the driver was loaded with no force parameter @@ -335,8 +322,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41) != 0x00)) { dev_dbg(&adapter->dev, - "LM83 detection failed at 0x%02x.\n", address); - goto exit_free; + "LM83 detection failed at 0x%02x.\n", + new_client->addr); + return -ENODEV; } } @@ -361,7 +349,7 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } @@ -372,15 +360,27 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) name = "lm82"; } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static int lm83_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm83_data *data; + int err; + + data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* * Register sysfs hooks * The LM82 can only monitor one external diode which is @@ -389,9 +389,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group))) - goto exit_detach; + goto exit_free; - if (kind == lm83) { + if (id->driver_data == lm83) { if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group_opt))) goto exit_remove_files; @@ -408,26 +408,20 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm83_group); sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm83_detach_client(struct i2c_client *client) +static int lm83_remove(struct i2c_client *client) { struct lm83_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm83_group); sysfs_remove_group(&client->dev.kobj, &lm83_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 182fe6a5605..ee5eca1c192 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range ) { int i; - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { + if (range >= lm85_range_map[15]) return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } + + /* Find the closest match */ + for (i = 14; i >= 0; --i) { + if (range >= lm85_range_map[i]) { + if ((lm85_range_map[i + 1] - range) < + (range - lm85_range_map[i])) + return i + 1; + return i; } } - return( i & 0x0f ); + + return 0; } #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index e1c183f0aae..21970f0d53a 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -5,7 +5,7 @@ * Philip Edelbrock <phil@netroedge.com> * Stephen Rousset <stephen.rousset@rocketlogix.com> * Dan Eaton <dan.eaton@rocketlogix.com> - * Copyright (C) 2004,2007 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org> * * Original port to Linux 2.6 by Jeff Oliver. * @@ -157,22 +157,35 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; * Functions declaration */ -static int lm87_attach_adapter(struct i2c_adapter *adapter); -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm87_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm87_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info); static void lm87_init_client(struct i2c_client *client); -static int lm87_detach_client(struct i2c_client *client); +static int lm87_remove(struct i2c_client *client); static struct lm87_data *lm87_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm87_id[] = { + { "lm87", lm87 }, + { "adm1024", adm1024 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm87_id); + static struct i2c_driver lm87_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm87", }, - .attach_adapter = lm87_attach_adapter, - .detach_client = lm87_detach_client, + .probe = lm87_probe, + .remove = lm87_remove, + .id_table = lm87_id, + .detect = lm87_detect, + .address_data = &addr_data, }; /* @@ -180,7 +193,6 @@ static struct i2c_driver lm87_driver = { */ struct lm87_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -562,13 +574,6 @@ static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15); * Real code */ -static int lm87_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm87_detect); -} - static struct attribute *lm87_attributes[] = { &dev_attr_in1_input.attr, &dev_attr_in1_min.attr, @@ -656,33 +661,15 @@ static const struct attribute_group lm87_group_opt = { .attrs = lm87_attributes_opt, }; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm87_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm87_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; static const char *names[] = { "lm87", "adm1024" }; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM87-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm87_driver; - new_client->flags = 0; + return -ENODEV; /* Default to an LM87 if forced */ if (kind == 0) @@ -704,20 +691,32 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) { dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE); + strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE); + + return 0; +} + +static int lm87_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm87_data *data; + int err; + + data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM87 chip */ lm87_init_client(new_client); @@ -732,7 +731,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group))) - goto exit_detach; + goto exit_free; if (data->channel & CHAN_NO_FAN(0)) { if ((err = device_create_file(&new_client->dev, @@ -832,8 +831,6 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm87_group); sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -877,18 +874,14 @@ static void lm87_init_client(struct i2c_client *client) } } -static int lm87_detach_client(struct i2c_client *client) +static int lm87_remove(struct i2c_client *client) { struct lm87_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm87_group); sysfs_remove_group(&client->dev.kobj, &lm87_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index d1a3da3dd8e..c24fe36ac78 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -187,23 +187,44 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); * Functions declaration */ -static int lm90_attach_adapter(struct i2c_adapter *adapter); -static int lm90_detect(struct i2c_adapter *adapter, int address, - int kind); +static int lm90_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int lm90_probe(struct i2c_client *client, + const struct i2c_device_id *id); static void lm90_init_client(struct i2c_client *client); -static int lm90_detach_client(struct i2c_client *client); +static int lm90_remove(struct i2c_client *client); static struct lm90_data *lm90_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm90_id[] = { + { "adm1032", adm1032 }, + { "adt7461", adt7461 }, + { "lm90", lm90 }, + { "lm86", lm86 }, + { "lm89", lm99 }, + { "lm99", lm99 }, /* Missing temperature offset */ + { "max6657", max6657 }, + { "max6658", max6657 }, + { "max6659", max6657 }, + { "max6680", max6680 }, + { "max6681", max6680 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm90_id); + static struct i2c_driver lm90_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm90", }, - .attach_adapter = lm90_attach_adapter, - .detach_client = lm90_detach_client, + .probe = lm90_probe, + .remove = lm90_remove, + .id_table = lm90_id, + .detect = lm90_detect, + .address_data = &addr_data, }; /* @@ -211,7 +232,6 @@ static struct i2c_driver lm90_driver = { */ struct lm90_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -477,40 +497,16 @@ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) return 0; } -static int lm90_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm90_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm90_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm90_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; + int address = new_client->addr; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM90-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm90_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -538,7 +534,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) LM90_REG_R_CONFIG1)) < 0 || (reg_convrate = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONVRATE)) < 0) - goto exit_free; + return -ENODEV; if ((address == 0x4C || address == 0x4D) && man_id == 0x01) { /* National Semiconductor */ @@ -546,7 +542,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if ((reg_config2 = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONFIG2)) < 0) - goto exit_free; + return -ENODEV; if ((reg_config1 & 0x2A) == 0x00 && (reg_config2 & 0xF8) == 0x00 @@ -610,10 +606,11 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } + /* Fill the i2c board info */ if (kind == lm90) { name = "lm90"; } else if (kind == adm1032) { @@ -621,7 +618,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) /* The ADM1032 supports PEC, but only if combined transactions are not used. */ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - new_client->flags |= I2C_CLIENT_PEC; + info->flags |= I2C_CLIENT_PEC; } else if (kind == lm99) { name = "lm99"; } else if (kind == lm86) { @@ -633,23 +630,39 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == adt7461) { name = "adt7461"; } + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static int lm90_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent); + struct lm90_data *data; + int err; - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - data->kind = kind; + data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + i2c_set_clientdata(new_client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; + /* Set the device type */ + data->kind = id->driver_data; + if (data->kind == adm1032) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + new_client->flags &= ~I2C_CLIENT_PEC; + } /* Initialize the LM90 chip */ lm90_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group))) - goto exit_detach; + goto exit_free; if (new_client->flags & I2C_CLIENT_PEC) { if ((err = device_create_file(&new_client->dev, &dev_attr_pec))) @@ -672,8 +685,6 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm90_group); device_remove_file(&new_client->dev, &dev_attr_pec); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -710,10 +721,9 @@ static void lm90_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); } -static int lm90_detach_client(struct i2c_client *client) +static int lm90_remove(struct i2c_client *client) { struct lm90_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm90_group); @@ -722,9 +732,6 @@ static int lm90_detach_client(struct i2c_client *client) device_remove_file(&client->dev, &sensor_dev_attr_temp2_offset.dev_attr); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index c31942e0824..b2e00c5a7ee 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -1,6 +1,6 @@ /* * lm92 - Hardware monitoring driver - * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2005-2008 Jean Delvare <khali@linux-fr.org> * * Based on the lm90 driver, with some ideas taken from the lm_sensors * lm92 driver as well. @@ -96,7 +96,6 @@ static struct i2c_driver lm92_driver; /* Client data (each client gets its own) */ struct lm92_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -319,32 +318,15 @@ static const struct attribute_group lm92_group = { .attrs = lm92_attributes, }; -/* The following function does more than just detection. If detection - succeeds, it also registers the new chip. */ -static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm92_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm92_data *data; - int err = 0; - char *name; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* Fill in enough client fields so that we can read from the chip, - which is required for identication */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm92_driver; - new_client->flags = 0; + return -ENODEV; /* A negative kind means that the driver was loaded with no force parameter (default), so we must identify the chip. */ @@ -364,34 +346,36 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) kind = lm92; /* No separate prefix */ } else - goto exit_free; - } else - if (kind == 0) /* Default to an LM92 if forced */ - kind = lm92; - - /* Give it the proper name */ - if (kind == lm92) { - name = "lm92"; - } else { /* Supposedly cannot happen */ - dev_dbg(&new_client->dev, "Kind out of range?\n"); - goto exit_free; + return -ENODEV; } - /* Fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + strlcpy(info->type, "lm92", I2C_NAME_SIZE); + + return 0; +} + +static int lm92_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm92_data *data; + int err; + + data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the i2c subsystem a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the chipset */ lm92_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -403,32 +387,19 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm92_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm92_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm92_detect); -} - -static int lm92_detach_client(struct i2c_client *client) +static int lm92_remove(struct i2c_client *client) { struct lm92_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm92_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } @@ -438,12 +409,23 @@ static int lm92_detach_client(struct i2c_client *client) * Module and driver stuff */ +static const struct i2c_device_id lm92_id[] = { + { "lm92", lm92 }, + /* max6635 could be added here */ + { } +}; +MODULE_DEVICE_TABLE(i2c, lm92_id); + static struct i2c_driver lm92_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm92", }, - .attach_adapter = lm92_attach_adapter, - .detach_client = lm92_detach_client, + .probe = lm92_probe, + .remove = lm92_remove, + .id_table = lm92_id, + .detect = lm92_detect, + .address_data = &addr_data, }; static int __init sensors_lm92_init(void) diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 5e678f5c883..fc36cadf36f 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -200,7 +200,6 @@ struct block1_t { * Client-specific data */ struct lm93_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -2501,45 +2500,14 @@ static void lm93_init_client(struct i2c_client *client) "chip to signal ready!\n"); } -static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm93_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct lm93_data *data; - struct i2c_client *client; - - int err = -ENODEV, func; - void (*update)(struct lm93_data *, struct i2c_client *); - - /* choose update routine based on bus capabilities */ - func = i2c_get_functionality(adapter); - if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) && - (!disable_block) ) { - dev_dbg(&adapter->dev,"using SMBus block data transactions\n"); - update = lm93_update_client_full; - } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) { - dev_dbg(&adapter->dev,"disabled SMBus block data " - "transactions\n"); - update = lm93_update_client_min; - } else { - dev_dbg(&adapter->dev,"detect failed, " - "smbus byte and/or word data not supported!\n"); - goto err_out; - } + struct i2c_adapter *adapter = client->adapter; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm78_{read,write}_value. */ - - if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) { - dev_dbg(&adapter->dev,"out of memory!\n"); - err = -ENOMEM; - goto err_out; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &lm93_driver; + if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN)) + return -ENODEV; /* detection */ if (kind < 0) { @@ -2548,7 +2516,7 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) if (mfr != 0x01) { dev_dbg(&adapter->dev,"detect failed, " "bad manufacturer id 0x%02x!\n", mfr); - goto err_free; + return -ENODEV; } } @@ -2563,31 +2531,61 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) if (kind == 0) dev_dbg(&adapter->dev, "(ignored 'force' parameter)\n"); - goto err_free; + return -ENODEV; } } - /* fill in remaining client fields */ - strlcpy(client->name, "lm93", I2C_NAME_SIZE); + strlcpy(info->type, "lm93", I2C_NAME_SIZE); dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n", client->name, i2c_adapter_id(client->adapter), client->addr); + return 0; +} + +static int lm93_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm93_data *data; + int err, func; + void (*update)(struct lm93_data *, struct i2c_client *); + + /* choose update routine based on bus capabilities */ + func = i2c_get_functionality(client->adapter); + if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) && + (!disable_block)) { + dev_dbg(&client->dev, "using SMBus block data transactions\n"); + update = lm93_update_client_full; + } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) { + dev_dbg(&client->dev, "disabled SMBus block data " + "transactions\n"); + update = lm93_update_client_min; + } else { + dev_dbg(&client->dev, "detect failed, " + "smbus byte and/or word data not supported!\n"); + err = -ENODEV; + goto err_out; + } + + data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL); + if (!data) { + dev_dbg(&client->dev, "out of memory!\n"); + err = -ENOMEM; + goto err_out; + } + i2c_set_clientdata(client, data); + /* housekeeping */ data->valid = 0; data->update = update; mutex_init(&data->update_lock); - /* tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto err_free; - /* initialize the chip */ lm93_init_client(client); err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp); if (err) - goto err_detach; + goto err_free; /* Register hwmon driver class */ data->hwmon_dev = hwmon_device_register(&client->dev); @@ -2597,43 +2595,39 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) err = PTR_ERR(data->hwmon_dev); dev_err(&client->dev, "error registering hwmon device.\n"); sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp); -err_detach: - i2c_detach_client(client); err_free: kfree(data); err_out: return err; } -/* This function is called when: - * lm93_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and lm93_driver is still present) */ -static int lm93_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, lm93_detect); -} - -static int lm93_detach_client(struct i2c_client *client) +static int lm93_remove(struct i2c_client *client) { struct lm93_data *data = i2c_get_clientdata(client); - int err = 0; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp); - err = i2c_detach_client(client); - if (!err) - kfree(data); - return err; + kfree(data); + return 0; } +static const struct i2c_device_id lm93_id[] = { + { "lm93", lm93 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm93_id); + static struct i2c_driver lm93_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm93", }, - .attach_adapter = lm93_attach_adapter, - .detach_client = lm93_detach_client, + .probe = lm93_probe, + .remove = lm93_remove, + .id_table = lm93_id, + .detect = lm93_detect, + .address_data = &addr_data, }; static int __init lm93_init(void) diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 7e7267a0454..1ab1cacad59 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -79,23 +79,34 @@ I2C_CLIENT_INSMOD_1(max1619); * Functions declaration */ -static int max1619_attach_adapter(struct i2c_adapter *adapter); -static int max1619_detect(struct i2c_adapter *adapter, int address, - int kind); +static int max1619_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int max1619_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void max1619_init_client(struct i2c_client *client); -static int max1619_detach_client(struct i2c_client *client); +static int max1619_remove(struct i2c_client *client); static struct max1619_data *max1619_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id max1619_id[] = { + { "max1619", max1619 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max1619_id); + static struct i2c_driver max1619_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "max1619", }, - .attach_adapter = max1619_attach_adapter, - .detach_client = max1619_detach_client, + .probe = max1619_probe, + .remove = max1619_remove, + .id_table = max1619_id, + .detect = max1619_detect, + .address_data = &addr_data, }; /* @@ -103,7 +114,6 @@ static struct i2c_driver max1619_driver = { */ struct max1619_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -208,41 +218,15 @@ static const struct attribute_group max1619_group = { * Real code */ -static int max1619_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, max1619_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max1619_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct max1619_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = new_client->adapter; u8 reg_config=0, reg_convrate=0, reg_status=0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - MAX1619-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &max1619_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -265,8 +249,8 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } @@ -285,28 +269,37 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - if (kind == max1619) - name = "max1619"; + strlcpy(info->type, "max1619", I2C_NAME_SIZE); + + return 0; +} + +static int max1619_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct max1619_data *data; + int err; + + data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the MAX1619 chip */ max1619_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -318,8 +311,6 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &max1619_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -341,17 +332,13 @@ static void max1619_init_client(struct i2c_client *client) config & 0xBF); /* run */ } -static int max1619_detach_client(struct i2c_client *client) +static int max1619_remove(struct i2c_client *client) { struct max1619_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &max1619_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 52d528b76cc..f27af6a9da4 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -104,22 +104,34 @@ I2C_CLIENT_INSMOD_1(max6650); #define DIV_FROM_REG(reg) (1 << (reg & 7)) -static int max6650_attach_adapter(struct i2c_adapter *adapter); -static int max6650_detect(struct i2c_adapter *adapter, int address, int kind); +static int max6650_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int max6650_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static int max6650_init_client(struct i2c_client *client); -static int max6650_detach_client(struct i2c_client *client); +static int max6650_remove(struct i2c_client *client); static struct max6650_data *max6650_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id max6650_id[] = { + { "max6650", max6650 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6650_id); + static struct i2c_driver max6650_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "max6650", }, - .attach_adapter = max6650_attach_adapter, - .detach_client = max6650_detach_client, + .probe = max6650_probe, + .remove = max6650_remove, + .id_table = max6650_id, + .detect = max6650_detect, + .address_data = &addr_data, }; /* @@ -128,7 +140,6 @@ static struct i2c_driver max6650_driver = { struct max6650_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -437,47 +448,21 @@ static struct attribute_group max6650_attr_grp = { * Real code */ -static int max6650_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max6650_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) { - dev_dbg(&adapter->dev, - "FATAL: max6650_attach_adapter class HWMON not set\n"); - return 0; - } - - return i2c_probe(adapter, &addr_data, max6650_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ - -static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct max6650_data *data; - int err = -ENODEV; + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support " "byte read mode, skipping.\n"); - return 0; - } - - if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) { - dev_err(&adapter->dev, "max6650: out of memory.\n"); - return -ENOMEM; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &max6650_driver; - /* * Now we do the remaining detection. A negative kind means that * the driver was loaded with no force parameter (default), so we @@ -501,28 +486,40 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT) & 0xFC))) { dev_dbg(&adapter->dev, "max6650: detection failed at 0x%02x.\n", address); - goto err_free; + return -ENODEV; } dev_info(&adapter->dev, "max6650: chip found at 0x%02x.\n", address); - strlcpy(client->name, "max6650", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "max6650", I2C_NAME_SIZE); - if ((err = i2c_attach_client(client))) { - dev_err(&adapter->dev, "max6650: failed to attach client.\n"); - goto err_free; + return 0; +} + +static int max6650_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max6650_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; } + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + /* * Initialize the max6650 chip */ - if (max6650_init_client(client)) - goto err_detach; + err = max6650_init_client(client); + if (err) + goto err_free; err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp); if (err) - goto err_detach; + goto err_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (!IS_ERR(data->hwmon_dev)) @@ -531,24 +528,19 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) err = PTR_ERR(data->hwmon_dev); dev_err(&client->dev, "error registering hwmon device.\n"); sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); -err_detach: - i2c_detach_client(client); err_free: kfree(data); return err; } -static int max6650_detach_client(struct i2c_client *client) +static int max6650_remove(struct i2c_client *client) { struct max6650_data *data = i2c_get_clientdata(client); - int err; sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); hwmon_device_unregister(data->hwmon_dev); - err = i2c_detach_client(client); - if (!err) - kfree(data); - return err; + kfree(data); + return 0; } static int max6650_init_client(struct i2c_client *client) diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index 3c9db6598ba..8bb5cb532d4 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -96,7 +96,6 @@ static inline int TEMP_FROM_REG(s8 val) } struct smsc47m192_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -114,18 +113,29 @@ struct smsc47m192_data { u8 vrm; }; -static int smsc47m192_attach_adapter(struct i2c_adapter *adapter); -static int smsc47m192_detect(struct i2c_adapter *adapter, int address, - int kind); -static int smsc47m192_detach_client(struct i2c_client *client); +static int smsc47m192_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int smsc47m192_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int smsc47m192_remove(struct i2c_client *client); static struct smsc47m192_data *smsc47m192_update_device(struct device *dev); +static const struct i2c_device_id smsc47m192_id[] = { + { "smsc47m192", smsc47m192 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smsc47m192_id); + static struct i2c_driver smsc47m192_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "smsc47m192", }, - .attach_adapter = smsc47m192_attach_adapter, - .detach_client = smsc47m192_detach_client, + .probe = smsc47m192_probe, + .remove = smsc47m192_remove, + .id_table = smsc47m192_id, + .detect = smsc47m192_detect, + .address_data = &addr_data, }; /* Voltages */ @@ -440,17 +450,6 @@ static const struct attribute_group smsc47m192_group_in4 = { .attrs = smsc47m192_attributes_in4, }; -/* This function is called when: - * smsc47m192_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and smsc47m192_driver is still present) */ -static int smsc47m192_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, smsc47m192_detect); -} - static void smsc47m192_init_client(struct i2c_client *client) { int i; @@ -481,31 +480,15 @@ static void smsc47m192_init_client(struct i2c_client *client) } } -/* This function is called by i2c_probe */ -static int smsc47m192_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int smsc47m192_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct smsc47m192_data *data; - int err = 0; - int version, config; + struct i2c_adapter *adapter = client->adapter; + int version; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &smsc47m192_driver; - - if (kind == 0) - kind = smsc47m192; + return -ENODEV; /* Detection criteria from sensors_detect script */ if (kind < 0) { @@ -523,26 +506,39 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address, } else { dev_dbg(&adapter->dev, "SMSC47M192 detection failed at 0x%02x\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE); + strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE); + + return 0; +} + +static int smsc47m192_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct smsc47m192_data *data; + int config; + int err; + + data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); data->vrm = vid_which_vrm(); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - /* Initialize the SMSC47M192 chip */ smsc47m192_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group))) - goto exit_detach; + goto exit_free; /* Pin 110 is either in4 (+12V) or VID4 */ config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG); @@ -563,26 +559,20 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address, exit_remove_files: sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int smsc47m192_detach_client(struct i2c_client *client) +static int smsc47m192_remove(struct i2c_client *client) { struct smsc47m192_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 76a3859c3fb..3b01001108c 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -60,7 +60,6 @@ static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; /* Each client has this additional data */ struct thmc50_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -77,17 +76,31 @@ struct thmc50_data { u8 alarms; }; -static int thmc50_attach_adapter(struct i2c_adapter *adapter); -static int thmc50_detach_client(struct i2c_client *client); +static int thmc50_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int thmc50_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int thmc50_remove(struct i2c_client *client); static void thmc50_init_client(struct i2c_client *client); static struct thmc50_data *thmc50_update_device(struct device *dev); +static const struct i2c_device_id thmc50_id[] = { + { "adm1022", adm1022 }, + { "thmc50", thmc50 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, thmc50_id); + static struct i2c_driver thmc50_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "thmc50", }, - .attach_adapter = thmc50_attach_adapter, - .detach_client = thmc50_detach_client, + .probe = thmc50_probe, + .remove = thmc50_remove, + .id_table = thmc50_id, + .detect = thmc50_detect, + .address_data = &addr_data, }; static ssize_t show_analog_out(struct device *dev, @@ -250,39 +263,23 @@ static const struct attribute_group temp3_group = { .attrs = temp3_attributes, }; -static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int thmc50_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { unsigned company; unsigned revision; unsigned config; - struct i2c_client *client; - struct thmc50_data *data; - struct device *dev; + struct i2c_adapter *adapter = client->adapter; int err = 0; const char *type_name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("thmc50: detect failed, " "smbus byte data not supported!\n"); - goto exit; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access thmc50 registers. */ - if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) { - pr_debug("thmc50: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto exit; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &thmc50_driver; - dev = &client->dev; - pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n", client->addr, i2c_adapter_id(client->adapter)); @@ -307,21 +304,22 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) } if (err == -ENODEV) { pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); - goto exit_free; + return err; } - data->type = kind; if (kind == adm1022) { int id = i2c_adapter_id(client->adapter); int i; type_name = "adm1022"; - data->has_temp3 = (config >> 7) & 1; /* config MSB */ for (i = 0; i + 1 < adm1022_temp3_num; i += 2) if (adm1022_temp3[i] == id && - adm1022_temp3[i + 1] == address) { + adm1022_temp3[i + 1] == client->addr) { /* enable 2nd remote temp */ - data->has_temp3 = 1; + config |= (1 << 7); + i2c_smbus_write_byte_data(client, + THMC50_REG_CONF, + config); break; } } else { @@ -330,19 +328,33 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) pr_debug("thmc50: Detected %s (version %x, revision %x)\n", type_name, (revision >> 4) - 0xc, revision & 0xf); - /* Fill in the remaining client fields & put it into the global list */ - strlcpy(client->name, type_name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, type_name, I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int thmc50_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct thmc50_data *data; + int err; + + data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL); + if (!data) { + pr_debug("thmc50: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->type = id->driver_data; + mutex_init(&data->update_lock); thmc50_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group))) - goto exit_detach; + goto exit_free; /* Register ADM1022 sysfs hooks */ if (data->has_temp3) @@ -364,34 +376,21 @@ exit_remove_sysfs: sysfs_remove_group(&client->dev.kobj, &temp3_group); exit_remove_sysfs_thmc50: sysfs_remove_group(&client->dev.kobj, &thmc50_group); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int thmc50_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, thmc50_detect); -} - -static int thmc50_detach_client(struct i2c_client *client) +static int thmc50_remove(struct i2c_client *client) { struct thmc50_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &thmc50_group); if (data->has_temp3) sysfs_remove_group(&client->dev.kobj, &temp3_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; @@ -412,8 +411,8 @@ static void thmc50_init_client(struct i2c_client *client) } config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); config |= 0x1; /* start the chip if it is in standby mode */ - if (data->has_temp3) - config |= 0x80; /* enable 2nd remote temp */ + if (data->type == adm1022 && (config & (1 << 7))) + data->has_temp3 = 1; i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); } diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 85077c4c803..e4e91c9d480 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -247,7 +247,6 @@ static u8 div_to_reg(int nr, long val) } struct w83791d_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -286,9 +285,11 @@ struct w83791d_data { u8 vrm; /* hwmon-vid */ }; -static int w83791d_attach_adapter(struct i2c_adapter *adapter); -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83791d_detach_client(struct i2c_client *client); +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83791d_remove(struct i2c_client *client); static int w83791d_read(struct i2c_client *client, u8 register); static int w83791d_write(struct i2c_client *client, u8 register, u8 value); @@ -300,12 +301,22 @@ static void w83791d_print_debug(struct w83791d_data *data, struct device *dev); static void w83791d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83791d_id[] = { + { "w83791d", w83791d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83791d_id); + static struct i2c_driver w83791d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83791d", }, - .attach_adapter = w83791d_attach_adapter, - .detach_client = w83791d_detach_client, + .probe = w83791d_probe, + .remove = w83791d_remove, + .id_table = w83791d_id, + .detect = w83791d_detect, + .address_data = &addr_data, }; /* following are the sysfs callback functions */ @@ -905,49 +916,12 @@ static const struct attribute_group w83791d_group = { .attrs = w83791d_attributes, }; -/* This function is called when: - * w83791d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83791d_driver is still present) */ -static int w83791d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83791d_detect); -} - -static int w83791d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = - kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83791d_driver; - strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - - -static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +static int w83791d_detect_subclients(struct i2c_client *client) { + struct i2c_adapter *adapter = client->adapter; struct w83791d_data *data = i2c_get_clientdata(client); + int address = client->addr; int i, id, err; u8 val; @@ -971,10 +945,7 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83791d_create_subclient(adapter, client, - val & 0x7, &data->lm75[0]); - if (err < 0) - goto error_sc_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -986,10 +957,8 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, err = -ENODEV; goto error_sc_1; } - err = w83791d_create_subclient(adapter, client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto error_sc_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -997,53 +966,31 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ error_sc_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); error_sc_0: return err; } -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct device *dev; - struct w83791d_data *data; - int i, val1, val2; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto error0; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83791d_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error0; - } - - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83791d_driver; - mutex_init(&data->update_lock); - - /* Now, we do the remaining detection. */ - /* The w83791d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_BANK); val2 = w83791d_read(client, W83791D_REG_CHIPMAN); @@ -1052,15 +999,13 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) /* yes it is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto error1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR should match */ if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto error1; + return -ENODEV; } } @@ -1075,30 +1020,33 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) /* get vendor ID */ val2 = w83791d_read(client, W83791D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - dev_dbg(dev, "Detection failed at step 4\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_WCHIPID); if (val1 == 0x71) { kind = w83791d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83791d: Ignoring 'force' parameter " "for unknown chip at adapter %d, " "address 0x%02x\n", i2c_adapter_id(adapter), address); - goto error1; + return -ENODEV; } } - if (kind == w83791d) { - client_name = "w83791d"; - } else { - dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n", - kind); - goto error1; - } + strlcpy(info->type, "w83791d", I2C_NAME_SIZE); + + return 0; +} + +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct w83791d_data *data; + struct device *dev = &client->dev; + int i, val1, err; #ifdef DEBUG val1 = w83791d_read(client, W83791D_REG_DID_VID4); @@ -1106,15 +1054,18 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); #endif - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); + data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto error0; + } - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); - if ((err = w83791d_detect_subclients(adapter, address, kind, client))) - goto error2; + err = w83791d_detect_subclients(client); + if (err) + goto error1; /* Initialize the chip */ w83791d_init_client(client); @@ -1141,43 +1092,29 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) error4: sysfs_remove_group(&client->dev.kobj, &w83791d_group); error3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -error2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); error1: kfree(data); error0: return err; } -static int w83791d_detach_client(struct i2c_client *client) +static int w83791d_remove(struct i2c_client *client) { struct w83791d_data *data = i2c_get_clientdata(client); - int err; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83791d_group); - } - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83791d_group); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 299629d47ed..cf94c5b0c87 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -267,9 +267,7 @@ DIV_TO_REG(long val) } struct w83792d_data { - struct i2c_client client; struct device *hwmon_dev; - enum chips type; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -299,9 +297,11 @@ struct w83792d_data { u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */ }; -static int w83792d_attach_adapter(struct i2c_adapter *adapter); -static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83792d_detach_client(struct i2c_client *client); +static int w83792d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83792d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83792d_remove(struct i2c_client *client); static struct w83792d_data *w83792d_update_device(struct device *dev); #ifdef DEBUG @@ -310,12 +310,22 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev); static void w83792d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83792d_id[] = { + { "w83792d", w83792d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83792d_id); + static struct i2c_driver w83792d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83792d", }, - .attach_adapter = w83792d_attach_adapter, - .detach_client = w83792d_detach_client, + .probe = w83792d_probe, + .remove = w83792d_remove, + .id_table = w83792d_id, + .detect = w83792d_detect, + .address_data = &addr_data, }; static inline long in_count_from_reg(int nr, struct w83792d_data *data) @@ -864,53 +874,14 @@ store_sf2_level(struct device *dev, struct device_attribute *attr, return count; } -/* This function is called when: - * w83792d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83792d_driver is still present) */ -static int -w83792d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83792d_detect); -} - - -static int -w83792d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *new_client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83792d_driver; - sub_client->flags = 0; - strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&new_client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - static int -w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, - struct i2c_client *new_client) +w83792d_detect_subclients(struct i2c_client *new_client) { int i, id, err; + int address = new_client->addr; u8 val; + struct i2c_adapter *adapter = new_client->adapter; struct w83792d_data *data = i2c_get_clientdata(new_client); id = i2c_adapter_id(adapter); @@ -932,10 +903,7 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83792d_create_subclient(adapter, new_client, val & 0x7, - &data->lm75[0]); - if (err < 0) - goto ERROR_SC_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -945,10 +913,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, err = -ENODEV; goto ERROR_SC_1; } - err = w83792d_create_subclient(adapter, new_client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto ERROR_SC_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -956,10 +922,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, /* Undo inits in case of errors */ ERROR_SC_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); ERROR_SC_0: return err; } @@ -1294,47 +1258,25 @@ static const struct attribute_group w83792d_group = { .attrs = w83792d_attributes, }; +/* Return 0 if detection is successful, -ENODEV otherwise */ static int -w83792d_detect(struct i2c_adapter *adapter, int address, int kind) +w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - int i = 0, val1 = 0, val2; - struct i2c_client *client; - struct device *dev; - struct w83792d_data *data; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto ERROR0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83792d_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; + return -ENODEV; } - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83792d_driver; - client->flags = 0; - - /* Now, we do the remaining detection. */ - /* The w83792d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_BANK); val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); @@ -1342,16 +1284,14 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) if (!(val1 & 0x07)) { /* is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto ERROR1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR should match */ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto ERROR1; + return -ENODEV; } } @@ -1367,45 +1307,48 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) /* get vendor ID */ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); if (val1 == 0x7a) { kind = w83792d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83792d: Ignoring 'force' parameter for" " unknown chip at adapter %d, address" " 0x%02x\n", i2c_adapter_id(adapter), address); - goto ERROR1; + return -ENODEV; } } - if (kind == w83792d) { - client_name = "w83792d"; - } else { - dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n", - kind); - goto ERROR1; - } + strlcpy(info->type, "w83792d", I2C_NAME_SIZE); + + return 0; +} + +static int +w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct w83792d_data *data; + struct device *dev = &client->dev; + int i, val1, err; - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); - data->type = kind; + data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto ERROR0; + } + i2c_set_clientdata(client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) + err = w83792d_detect_subclients(client); + if (err) goto ERROR1; - if ((err = w83792d_detect_subclients(adapter, address, - kind, client))) - goto ERROR2; - /* Initialize the chip */ w83792d_init_client(client); @@ -1457,16 +1400,10 @@ exit_remove_files: for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]); ERROR3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -ERROR2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); ERROR1: kfree(data); ERROR0: @@ -1474,30 +1411,23 @@ ERROR0: } static int -w83792d_detach_client(struct i2c_client *client) +w83792d_remove(struct i2c_client *client) { struct w83792d_data *data = i2c_get_clientdata(client); - int err, i; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83792d_group); - for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) - sysfs_remove_group(&client->dev.kobj, - &w83792d_group_fan[i]); - } + int i; - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83792d_group); + for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) + sysfs_remove_group(&client->dev.kobj, + &w83792d_group_fan[i]); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index ed3c019b78c..0a739f1c69b 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -179,7 +179,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max) } struct w83793_data { - struct i2c_client client; struct i2c_client *lm75[2]; struct device *hwmon_dev; struct mutex update_lock; @@ -226,19 +225,31 @@ struct w83793_data { static u8 w83793_read_value(struct i2c_client *client, u16 reg); static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value); -static int w83793_attach_adapter(struct i2c_adapter *adapter); -static int w83793_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83793_detach_client(struct i2c_client *client); +static int w83793_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83793_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83793_remove(struct i2c_client *client); static void w83793_init_client(struct i2c_client *client); static void w83793_update_nonvolatile(struct device *dev); static struct w83793_data *w83793_update_device(struct device *dev); +static const struct i2c_device_id w83793_id[] = { + { "w83793", w83793 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83793_id); + static struct i2c_driver w83793_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83793", }, - .attach_adapter = w83793_attach_adapter, - .detach_client = w83793_detach_client, + .probe = w83793_probe, + .remove = w83793_remove, + .id_table = w83793_id, + .detect = w83793_detect, + .address_data = &addr_data, }; static ssize_t @@ -1053,89 +1064,51 @@ static void w83793_init_client(struct i2c_client *client) } -static int w83793_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83793_detect); -} - -static int w83793_detach_client(struct i2c_client *client) +static int w83793_remove(struct i2c_client *client) { struct w83793_data *data = i2c_get_clientdata(client); struct device *dev = &client->dev; - int err, i; + int i; - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); + hwmon_device_unregister(data->hwmon_dev); - for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) - device_remove_file(dev, - &w83793_sensor_attr_2[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) + device_remove_file(dev, + &w83793_sensor_attr_2[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) - device_remove_file(dev, &sda_single_files[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) + device_remove_file(dev, &sda_single_files[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) - device_remove_file(dev, &w83793_vid[i].dev_attr); - device_remove_file(dev, &dev_attr_vrm); + for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) + device_remove_file(dev, &w83793_vid[i].dev_attr); + device_remove_file(dev, &dev_attr_vrm); - for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++) - device_remove_file(dev, &w83793_left_fan[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++) + device_remove_file(dev, &w83793_left_fan[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++) - device_remove_file(dev, &w83793_left_pwm[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++) + device_remove_file(dev, &w83793_left_pwm[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) - device_remove_file(dev, &w83793_temp[i].dev_attr); - } + for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) + device_remove_file(dev, &w83793_temp[i].dev_attr); - if ((err = i2c_detach_client(client))) - return err; + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + kfree(data); return 0; } static int -w83793_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *client, int addr, - struct i2c_client **sub_cli) -{ - int err = 0; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = - kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83793_driver; - strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - } - return err; -} - -static int -w83793_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +w83793_detect_subclients(struct i2c_client *client) { int i, id, err; + int address = client->addr; u8 tmp; + struct i2c_adapter *adapter = client->adapter; struct w83793_data *data = i2c_get_clientdata(client); id = i2c_adapter_id(adapter); @@ -1158,11 +1131,7 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR); if (!(tmp & 0x08)) { - err = - w83793_create_subclient(adapter, client, tmp & 0x7, - &data->lm75[0]); - if (err < 0) - goto ERROR_SC_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7)); } if (!(tmp & 0x80)) { if ((data->lm75[0] != NULL) @@ -1173,10 +1142,8 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, err = -ENODEV; goto ERROR_SC_1; } - err = w83793_create_subclient(adapter, client, - (tmp >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto ERROR_SC_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((tmp >> 4) & 0x7)); } return 0; @@ -1184,69 +1151,44 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ ERROR_SC_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); ERROR_SC_0: return err; } -static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83793_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - int i; - u8 tmp, val; - struct i2c_client *client; - struct device *dev; - struct w83793_data *data; - int files_fan = ARRAY_SIZE(w83793_left_fan) / 7; - int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5; - int files_temp = ARRAY_SIZE(w83793_temp) / 6; - int err = 0; + u8 tmp, bank; + struct i2c_adapter *adapter = client->adapter; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto exit; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83793_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83793_driver; + bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); - data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); - - /* Now, we do the remaining detection. */ if (kind < 0) { - tmp = data->bank & 0x80 ? 0x5c : 0xa3; + tmp = bank & 0x80 ? 0x5c : 0xa3; /* Check Winbond vendor ID */ if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) { pr_debug("w83793: Detection failed at check " "vendor id\n"); - err = -ENODEV; - goto free_mem; + return -ENODEV; } /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR should match */ - if ((data->bank & 0x07) == 0 + if ((bank & 0x07) == 0 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) != (address << 1)) { pr_debug("w83793: Detection failed at check " "i2c addr\n"); - err = -ENODEV; - goto free_mem; + return -ENODEV; } } @@ -1255,30 +1197,47 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) Winbond. Determine the chip type now */ if (kind <= 0) { - if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) { + if (0x7b == i2c_smbus_read_byte_data(client, + W83793_REG_CHIPID)) { kind = w83793; } else { if (kind == 0) dev_warn(&adapter->dev, "w83793: Ignoring " "'force' parameter for unknown chip " "at address 0x%02x\n", address); - err = -ENODEV; - goto free_mem; + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "w83793", I2C_NAME_SIZE); + strlcpy(info->type, "w83793", I2C_NAME_SIZE); + + return 0; +} +static int w83793_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct w83793_data *data; + int i, tmp, val, err; + int files_fan = ARRAY_SIZE(w83793_left_fan) / 7; + int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5; + int files_temp = ARRAY_SIZE(w83793_temp) / 6; + + data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) + err = w83793_detect_subclients(client); + if (err) goto free_mem; - if ((err = w83793_detect_subclients(adapter, address, kind, client))) - goto detach_client; - /* Initialize the chip */ w83793_init_client(client); @@ -1459,16 +1418,10 @@ exit_remove: for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) device_remove_file(dev, &w83793_temp[i].dev_attr); - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -detach_client: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); free_mem: kfree(data); exit: diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 52e268e25da..ea295b9fc4f 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -81,10 +81,11 @@ I2C_CLIENT_INSMOD_1(w83l785ts); * Functions declaration */ -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, - int kind); -static int w83l785ts_detach_client(struct i2c_client *client); +static int w83l785ts_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83l785ts_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83l785ts_remove(struct i2c_client *client); static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); @@ -92,12 +93,22 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); * Driver data (common to all clients) */ +static const struct i2c_device_id w83l785ts_id[] = { + { "w83l785ts", w83l785ts }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83l785ts_id); + static struct i2c_driver w83l785ts_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83l785ts", }, - .attach_adapter = w83l785ts_attach_adapter, - .detach_client = w83l785ts_detach_client, + .probe = w83l785ts_probe, + .remove = w83l785ts_remove, + .id_table = w83l785ts_id, + .detect = w83l785ts_detect, + .address_data = &addr_data, }; /* @@ -105,7 +116,6 @@ static struct i2c_driver w83l785ts_driver = { */ struct w83l785ts_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -135,40 +145,14 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); * Real code */ -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83l785ts_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83l785ts_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct w83l785ts_data *data; - int err = 0; - + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - * W83L785TS-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &w83l785ts_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -188,8 +172,8 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { dev_dbg(&adapter->dev, "W83L785TS-S detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } @@ -214,22 +198,34 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%04X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - /* We can fill in the remaining client fields. */ - strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); + strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE); + + return 0; +} + +static int w83l785ts_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct w83l785ts_data *data; + int err = 0; + + data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); /* Default values in case the first read fails (unlikely). */ data->temp[1] = data->temp[0] = 0; - /* Tell the I2C layer a new client has arrived. */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* * Initialize the W83L785TS chip * Nothing yet, assume it is already started. @@ -259,25 +255,20 @@ exit_remove: &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - i2c_detach_client(new_client); -exit_free: kfree(data); exit: return err; } -static int w83l785ts_detach_client(struct i2c_client *client) +static int w83l785ts_remove(struct i2c_client *client) { struct w83l785ts_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); device_remove_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; @@ -286,6 +277,18 @@ static int w83l785ts_detach_client(struct i2c_client *client) static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) { int value, i; + struct device *dev; + const char *prefix; + + /* We might be called during detection, at which point the client + isn't yet fully initialized, so we can't use dev_dbg on it */ + if (i2c_get_clientdata(client)) { + dev = &client->dev; + prefix = ""; + } else { + dev = &client->adapter->dev; + prefix = "w83l785ts: "; + } /* Frequent read errors have been reported on Asus boards, so we * retry on read errors. If it still fails (unlikely), return the @@ -293,15 +296,15 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) for (i = 1; i <= MAX_RETRIES; i++) { value = i2c_smbus_read_byte_data(client, reg); if (value >= 0) { - dev_dbg(&client->dev, "Read 0x%02x from register " - "0x%02x.\n", value, reg); + dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n", + prefix, value, reg); return value; } - dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); + dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i); msleep(i); } - dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n", + dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix, reg); return defval; } diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index 41e22ddb568..badca769f35 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -121,7 +121,6 @@ DIV_TO_REG(long val) } struct w83l786ng_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -146,18 +145,30 @@ struct w83l786ng_data { u8 tolerance[2]; }; -static int w83l786ng_attach_adapter(struct i2c_adapter *adapter); -static int w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83l786ng_detach_client(struct i2c_client *client); +static int w83l786ng_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83l786ng_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83l786ng_remove(struct i2c_client *client); static void w83l786ng_init_client(struct i2c_client *client); static struct w83l786ng_data *w83l786ng_update_device(struct device *dev); +static const struct i2c_device_id w83l786ng_id[] = { + { "w83l786ng", w83l786ng }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83l786ng_id); + static struct i2c_driver w83l786ng_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83l786ng", }, - .attach_adapter = w83l786ng_attach_adapter, - .detach_client = w83l786ng_detach_client, + .probe = w83l786ng_probe, + .remove = w83l786ng_remove, + .id_table = w83l786ng_id, + .detect = w83l786ng_detect, + .address_data = &addr_data, }; static u8 @@ -575,42 +586,15 @@ static const struct attribute_group w83l786ng_group = { }; static int -w83l786ng_attach_adapter(struct i2c_adapter *adapter) +w83l786ng_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83l786ng_detect); -} - -static int -w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct device *dev; - struct w83l786ng_data *data; - int i, err = 0; - u8 reg_tmp; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto exit; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83l786ng_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; + return -ENODEV; } - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83l786ng_driver; - /* * Now we do the remaining detection. A negative kind means that * the driver was loaded with no force parameter (default), so we @@ -627,8 +611,8 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) W83L786NG_REG_CONFIG) & 0x80) != 0x00)) { dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x.\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } @@ -651,17 +635,31 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%04X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "w83l786ng", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int +w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct w83l786ng_data *data; + int i, err = 0; + u8 reg_tmp; + + data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the chip */ w83l786ng_init_client(client); @@ -693,25 +691,19 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); - i2c_detach_client(client); -exit_free: kfree(data); exit: return err; } static int -w83l786ng_detach_client(struct i2c_client *client) +w83l786ng_remove(struct i2c_client *client) { struct w83l786ng_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; |