diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/pmbus/zl6100.c | 12 | ||||
| -rw-r--r-- | drivers/hwmon/w83627ehf.c | 17 |
2 files changed, 11 insertions, 18 deletions
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 880b90cf4d3..e3e8420b7b8 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -200,17 +200,11 @@ static int zl6100_probe(struct i2c_client *client, data->id = mid->driver_data; /* - * ZL2005, ZL2008, ZL2105, and ZL6100 are known to require a wait time - * between I2C accesses. ZL2004 and ZL6105 are known to be safe. - * Other chips have not yet been tested. - * - * Only clear the wait time for chips known to be safe. The wait time - * can be cleared later for additional chips if tests show that it - * is not needed (in other words, better be safe than sorry). + * According to information from the chip vendor, all currently + * supported chips are known to require a wait time between I2C + * accesses. */ data->delay = delay; - if (data->id == zl2004 || data->id == zl6105) - data->delay = 0; /* * Since there was a direct I2C device access above, wait before diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 5276d1933db..a658d62c5e1 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -39,7 +39,7 @@ 0x8860 0xa1 w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 - w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3 + w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3 @@ -1607,7 +1607,7 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ val = step_time_to_reg(val, data->pwm_mode[nr]); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ + w83627ehf_write_value(data, data->REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } \ @@ -2004,7 +2004,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) goto exit; } - data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL); + data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data), + GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit_release; @@ -2157,16 +2158,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) w83627ehf_set_temp_reg_ehf(data, 3); /* - * Temperature sources for temp1 and temp2 are selected with + * Temperature sources for temp2 and temp3 are selected with * bank 0, registers 0x49 and 0x4a. */ data->temp_src[0] = 0; /* SYSTIN */ reg = w83627ehf_read_value(data, 0x49) & 0x07; /* Adjust to have the same mapping as other source registers */ if (reg == 0) - data->temp_src[1]++; + data->temp_src[1] = 1; else if (reg >= 2 && reg <= 5) - data->temp_src[1] += 2; + data->temp_src[1] = reg + 2; else /* should never happen */ data->have_temp &= ~(1 << 1); reg = w83627ehf_read_value(data, 0x4a); @@ -2493,9 +2494,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) exit_remove: w83627ehf_device_remove_files(dev); - kfree(data); - platform_set_drvdata(pdev, NULL); exit_release: + platform_set_drvdata(pdev, NULL); release_region(res->start, IOREGION_LENGTH); exit: return err; @@ -2509,7 +2509,6 @@ static int __devexit w83627ehf_remove(struct platform_device *pdev) w83627ehf_device_remove_files(&pdev->dev); release_region(data->addr, IOREGION_LENGTH); platform_set_drvdata(pdev, NULL); - kfree(data); return 0; } |