diff options
Diffstat (limited to 'drivers/hwmon')
39 files changed, 2797 insertions, 1124 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5ce43d8dfa9..b13172cfbee 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -111,22 +111,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADCXX - tristate "National Semiconductor ADCxxxSxxx" - depends on SPI_MASTER - help - If you say yes here you get support for the National Semiconductor - ADC<bb><c>S<sss> chip family, where - * bb is the resolution in number of bits (8, 10, 12) - * c is the number of channels (1, 2, 4, 8) - * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 - kSPS and 101 for 1 MSPS) - - Examples : ADC081S101, ADC124S501, ... - - This driver can also be built as a module. If so, the module - will be called adcxx. - config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -296,8 +280,8 @@ config SENSORS_K10TEMP If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h, - 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and - 16h (Kabini) microarchitectures. + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and + 16h (Kabini/Mullins) microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. @@ -312,6 +296,31 @@ config SENSORS_FAM15H_POWER This driver can also be built as a module. If so, the module will be called fam15h_power. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C @@ -435,6 +444,12 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -451,26 +466,6 @@ config SENSORS_FSCHMD This driver can also be built as a module. If so, the module will be called fschmd. -config SENSORS_G760A - tristate "GMT G760A" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G760A fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g760a. - -config SENSORS_G762 - tristate "GMT G762 and G763" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G762 and G763 fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g762. - config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -492,6 +487,26 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GPIO_FAN tristate "GPIO fan" depends on GPIOLIB @@ -511,24 +526,6 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. -config SENSORS_HTU21 - tristate "Measurement Specialties HTU21D humidity/temperature sensors" - depends on I2C - help - If you say yes here you get support for the Measurement Specialties - HTU21D humidity and temperature sensors. - - This driver can also be built as a module. If so, the module - will be called htu21. - -config SENSORS_CORETEMP - tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 - help - If you say yes here you get support for the temperature - sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. - config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -557,6 +554,14 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_IBMPOWERNV + tristate "IBM PowerNv Platform temperature/power/fan sensor" + depends on PPC_POWERNV + default y + help + If you say yes here you get support for the temperature/fan/power + sensors on your platform. + config SENSORS_IIO_HWMON tristate "Hwmon driver that uses channels specified via iio maps" depends on IIO @@ -566,6 +571,14 @@ config SENSORS_IIO_HWMON for those channels specified in the map. This map can be provided either via platform data or the device tree bindings. +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp for details. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on !PPC @@ -614,6 +627,219 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_HTU21 + tristate "Measurement Specialties HTU21D humidity/temperature sensors" + depends on I2C + help + If you say yes here you get support for the Measurement Specialties + HTU21D humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu21. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" + depends on I2C + help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_LM63 tristate "National Semiconductor LM63 and compatibles" depends on I2C @@ -776,50 +1002,6 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. -config SENSORS_LTC4151 - tristate "Linear Technology LTC4151" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4151 - High Voltage I2C Current and Voltage Monitor interface. - - This driver can also be built as a module. If so, the module will - be called ltc4151. - -config SENSORS_LTC4215 - tristate "Linear Technology LTC4215" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4215 - Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4215. - -config SENSORS_LTC4245 - tristate "Linear Technology LTC4245" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4245 - Multiple Supply Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4245. - -config SENSORS_LTC4261 - tristate "Linear Technology LTC4261" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4261 - Negative Voltage Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4261. - config SENSORS_LM95234 tristate "National Semiconductor LM95234" depends on I2C @@ -849,125 +1031,33 @@ config SENSORS_LM95245 This driver can also be built as a module. If so, the module will be called lm95245. -config SENSORS_MAX1111 - tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" - depends on SPI_MASTER - help - Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 - ADC chips. - - This driver can also be built as a module. If so, the module - will be called max1111. - -config SENSORS_MAX16065 - tristate "Maxim MAX16065 System Manager and compatibles" - depends on I2C - help - If you say yes here you get support for hardware monitoring - capabilities of the following Maxim System Manager chips. - MAX16065 - MAX16066 - MAX16067 - MAX16068 - MAX16070 - MAX16071 - - This driver can also be built as a module. If so, the module - will be called max16065. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_MAX1668 - tristate "Maxim MAX1668 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX1668, MAX1989 and - MAX1805 chips. - - This driver can also be built as a module. If so, the module - will be called max1668. - -config SENSORS_MAX197 - tristate "Maxim MAX197 and compatibles" - help - Support for the Maxim MAX197 A/D converter. - Support will include, but not be limited to, MAX197, and MAX199. - - This driver can also be built as a module. If so, the module - will be called max197. - -config SENSORS_MAX6639 - tristate "Maxim MAX6639 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6639 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6639. - -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - -config SENSORS_MAX6650 - tristate "Maxim MAX6650 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6650 / MAX6651 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6650. - -config SENSORS_MAX6697 - tristate "Maxim MAX6697 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX6581, MAX6602, MAX6622, - MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 - temperature sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6697. - -config SENSORS_MCP3021 - tristate "Microchip MCP3021 and compatibles" - depends on I2C +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on !PPC + select HWMON_VID help - If you say yes here you get support for MCP3021 and MCP3221. - The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 - with 12-bit resolution. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. This driver can also be built as a module. If so, the module - will be called mcp3021. + will be called pc87360. -config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" +config SENSORS_PC87427 + tristate "National Semiconductor PC87427" depends on !PPC - select HWMON_VID help - If you say yes here you get support for the hardware monitoring - functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D - and compatible Super-I/O chips. This driver replaces the - w83627ehf driver for NCT6775F and NCT6776F. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC87427 Super-I/O chip. + The chip has two distinct logical devices, one for fan speed + monitoring and control, and one for voltage and temperature + monitoring. Fan speed monitoring and control are supported, as + well as temperature monitoring. Voltages aren't supported yet. This driver can also be built as a module. If so, the module - will be called nct6775. + will be called pc87427. config SENSORS_NTC_THERMISTOR tristate "NTC thermistor support" @@ -983,33 +1073,18 @@ config SENSORS_NTC_THERMISTOR This driver can also be built as a module. If so, the module will be called ntc-thermistor. -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" +config SENSORS_NCT6775 + tristate "Nuvoton NCT6775F and compatibles" depends on !PPC select HWMON_VID help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. - - This driver can also be built as a module. If so, the module - will be called pc87360. - -config SENSORS_PC87427 - tristate "National Semiconductor PC87427" - depends on !PPC - help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC87427 Super-I/O chip. - The chip has two distinct logical devices, one for fan speed - monitoring and control, and one for voltage and temperature - monitoring. Fan speed monitoring and control are supported, as - well as temperature monitoring. Voltages aren't supported yet. + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D + and compatible Super-I/O chips. This driver replaces the + w83627ehf driver for NCT6775F and NCT6776F. This driver can also be built as a module. If so, the module - will be called pc87427. + will be called nct6775. config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" @@ -1074,21 +1149,6 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C - default n - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && !PPC @@ -1210,6 +1270,31 @@ config SENSORS_SCH5636 This driver can also be built as a module. If so, the module will be called sch5636. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + +config SENSORS_ADC128D818 + tristate "Texas Instruments ADC128D818" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + ADC128D818 System Monitor with Temperature Sensor chip. + + This driver can also be built as a module. If so, the module + will be called adc128d818. + config SENSORS_ADS1015 tristate "Texas Instruments ADS1015" depends on I2C @@ -1525,37 +1610,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_APPLESMC - tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on INPUT && X86 - select NEW_LEDS - select LEDS_CLASS - select INPUT_POLLDEV - default n - help - This driver provides support for the Apple System Management - Controller, which provides an accelerometer (Apple Sudden Motion - Sensor), light sensors, temperature sensors, keyboard backlight - control and fan control. - - Only Intel-based Apple's computers are supported (MacBook Pro, - MacBook, MacMini). - - Data from the different sensors, keyboard backlight control and fan - control are accessible via sysfs. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of applesmc. - -config SENSORS_MC13783_ADC - tristate "Freescale MC13783/MC13892 ADC" - depends on MFD_MC13XXX - help - Support for the A/D converter on MC13783 and MC13892 PMIC. - if ACPI comment "ACPI drivers" diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index ec7cde06eb5..199c401bf8d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o obj-$(CONFIG_SENSORS_AD7314) += ad7314.o obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o +obj-$(CONFIG_SENSORS_ADC128D818) += adc128d818.o obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o @@ -70,6 +71,7 @@ obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o +obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o obj-$(CONFIG_SENSORS_INA209) += ina209.o obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o @@ -95,9 +97,12 @@ obj-$(CONFIG_SENSORS_LM93) += lm93.o obj-$(CONFIG_SENSORS_LM95234) += lm95234.o obj-$(CONFIG_SENSORS_LM95241) += lm95241.o obj-$(CONFIG_SENSORS_LM95245) += lm95245.o +obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o obj-$(CONFIG_SENSORS_LTC4215) += ltc4215.o +obj-$(CONFIG_SENSORS_LTC4222) += ltc4222.o obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o +obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX16065) += max16065.o diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c new file mode 100644 index 00000000000..5ffd81f19d0 --- /dev/null +++ b/drivers/hwmon/adc128d818.c @@ -0,0 +1,491 @@ +/* + * Driver for TI ADC128D818 System Monitor with Temperature Sensor + * + * Copyright (c) 2014 Guenter Roeck + * + * Derived from lm80.c + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + * and Philip Edelbrock <phil@netroedge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/mutex.h> + +/* Addresses to scan + * The chip also supports addresses 0x35..0x37. Don't scan those addresses + * since they are also used by some EEPROMs, which may result in false + * positives. + */ +static const unsigned short normal_i2c[] = { + 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; + +/* registers */ +#define ADC128_REG_IN_MAX(nr) (0x2a + (nr) * 2) +#define ADC128_REG_IN_MIN(nr) (0x2b + (nr) * 2) +#define ADC128_REG_IN(nr) (0x20 + (nr)) + +#define ADC128_REG_TEMP 0x27 +#define ADC128_REG_TEMP_MAX 0x38 +#define ADC128_REG_TEMP_HYST 0x39 + +#define ADC128_REG_CONFIG 0x00 +#define ADC128_REG_ALARM 0x01 +#define ADC128_REG_MASK 0x03 +#define ADC128_REG_CONV_RATE 0x07 +#define ADC128_REG_ONESHOT 0x09 +#define ADC128_REG_SHUTDOWN 0x0a +#define ADC128_REG_CONFIG_ADV 0x0b +#define ADC128_REG_BUSY_STATUS 0x0c + +#define ADC128_REG_MAN_ID 0x3e +#define ADC128_REG_DEV_ID 0x3f + +struct adc128_data { + struct i2c_client *client; + struct regulator *regulator; + int vref; /* Reference voltage in mV */ + struct mutex update_lock; + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u16 in[3][7]; /* Register value, normalized to 12 bit + * 0: input voltage + * 1: min limit + * 2: max limit + */ + s16 temp[3]; /* Register value, normalized to 9 bit + * 0: sensor 1: limit 2: hyst + */ + u8 alarms; /* alarm register value */ +}; + +static struct adc128_data *adc128_update_device(struct device *dev) +{ + struct adc128_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + struct adc128_data *ret = data; + int i, rv; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + for (i = 0; i < 7; i++) { + rv = i2c_smbus_read_word_swapped(client, + ADC128_REG_IN(i)); + if (rv < 0) + goto abort; + data->in[0][i] = rv >> 4; + + rv = i2c_smbus_read_byte_data(client, + ADC128_REG_IN_MIN(i)); + if (rv < 0) + goto abort; + data->in[1][i] = rv << 4; + + rv = i2c_smbus_read_byte_data(client, + ADC128_REG_IN_MAX(i)); + if (rv < 0) + goto abort; + data->in[2][i] = rv << 4; + } + + rv = i2c_smbus_read_word_swapped(client, ADC128_REG_TEMP); + if (rv < 0) + goto abort; + data->temp[0] = rv >> 7; + + rv = i2c_smbus_read_byte_data(client, ADC128_REG_TEMP_MAX); + if (rv < 0) + goto abort; + data->temp[1] = rv << 1; + + rv = i2c_smbus_read_byte_data(client, ADC128_REG_TEMP_HYST); + if (rv < 0) + goto abort; + data->temp[2] = rv << 1; + + rv = i2c_smbus_read_byte_data(client, ADC128_REG_ALARM); + if (rv < 0) + goto abort; + data->alarms |= rv; + + data->last_updated = jiffies; + data->valid = true; + } + goto done; + +abort: + ret = ERR_PTR(rv); + data->valid = false; +done: + mutex_unlock(&data->update_lock); + return ret; +} + +static ssize_t adc128_show_in(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adc128_data *data = adc128_update_device(dev); + int index = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = DIV_ROUND_CLOSEST(data->in[index][nr] * data->vref, 4095); + return sprintf(buf, "%d\n", val); +} + +static ssize_t adc128_set_in(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adc128_data *data = dev_get_drvdata(dev); + int index = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + u8 reg, regval; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err < 0) + return err; + + mutex_lock(&data->update_lock); + /* 10 mV LSB on limit registers */ + regval = clamp_val(DIV_ROUND_CLOSEST(val, 10), 0, 255); + data->in[index][nr] = regval << 4; + reg = index == 1 ? ADC128_REG_IN_MIN(nr) : ADC128_REG_IN_MAX(nr); + i2c_smbus_write_byte_data(data->client, reg, regval); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t adc128_show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adc128_data *data = adc128_update_device(dev); + int index = to_sensor_dev_attr(attr)->index; + int temp; + + if (IS_ERR(data)) + return PTR_ERR(data); + + temp = (data->temp[index] << 7) >> 7; /* sign extend */ + return sprintf(buf, "%d\n", temp * 500);/* 0.5 degrees C resolution */ +} + +static ssize_t adc128_set_temp(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adc128_data *data = dev_get_drvdata(dev); + int index = to_sensor_dev_attr(attr)->index; + long val; + int err; + s8 regval; + + err = kstrtol(buf, 10, &val); + if (err < 0) + return err; + + mutex_lock(&data->update_lock); + regval = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); + data->temp[index] = regval << 1; + i2c_smbus_write_byte_data(data->client, + index == 1 ? ADC128_REG_TEMP_MAX + : ADC128_REG_TEMP_HYST, + regval); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t adc128_show_alarm(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adc128_data *data = adc128_update_device(dev); + int mask = 1 << to_sensor_dev_attr(attr)->index; + u8 alarms; + + if (IS_ERR(data)) + return PTR_ERR(data); + + /* + * Clear an alarm after reporting it to user space. If it is still + * active, the next update sequence will set the alarm bit again. + */ + alarms = data->alarms; + data->alarms &= ~mask; + + return sprintf(buf, "%u\n", !!(alarms & mask)); +} + +static SENSOR_DEVICE_ATTR_2(in0_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 0, 0); +static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 0, 1); +static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 0, 2); + +static SENSOR_DEVICE_ATTR_2(in1_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 1, 0); +static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 1, 1); +static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 1, 2); + +static SENSOR_DEVICE_ATTR_2(in2_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 2, 0); +static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 2, 1); +static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 2, 2); + +static SENSOR_DEVICE_ATTR_2(in3_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 3, 0); +static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 3, 1); +static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 3, 2); + +static SENSOR_DEVICE_ATTR_2(in4_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 4, 0); +static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 4, 1); +static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 4, 2); + +static SENSOR_DEVICE_ATTR_2(in5_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 5, 0); +static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 5, 1); +static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 5, 2); + +static SENSOR_DEVICE_ATTR_2(in6_input, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 6, 0); +static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 6, 1); +static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO, + adc128_show_in, adc128_set_in, 6, 2); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adc128_show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + adc128_show_temp, adc128_set_temp, 1); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + adc128_show_temp, adc128_set_temp, 2); + +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, adc128_show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, adc128_show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, adc128_show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, adc128_show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, adc128_show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, adc128_show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, adc128_show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adc128_show_alarm, NULL, 7); + +static struct attribute *adc128_attrs[] = { + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(adc128); + +static int adc128_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + int man_id, dev_id; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + man_id = i2c_smbus_read_byte_data(client, ADC128_REG_MAN_ID); + dev_id = i2c_smbus_read_byte_data(client, ADC128_REG_DEV_ID); + if (man_id != 0x01 || dev_id != 0x09) + return -ENODEV; + + /* Check unused bits for confirmation */ + if (i2c_smbus_read_byte_data(client, ADC128_REG_CONFIG) & 0xf4) + return -ENODEV; + if (i2c_smbus_read_byte_data(client, ADC128_REG_CONV_RATE) & 0xfe) + return -ENODEV; + if (i2c_smbus_read_byte_data(client, ADC128_REG_ONESHOT) & 0xfe) + return -ENODEV; + if (i2c_smbus_read_byte_data(client, ADC128_REG_SHUTDOWN) & 0xfe) + return -ENODEV; + if (i2c_smbus_read_byte_data(client, ADC128_REG_CONFIG_ADV) & 0xf8) + return -ENODEV; + if (i2c_smbus_read_byte_data(client, ADC128_REG_BUSY_STATUS) & 0xfc) + return -ENODEV; + + strlcpy(info->type, "adc128d818", I2C_NAME_SIZE); + + return 0; +} + +static int adc128_init_client(struct adc128_data *data) +{ + struct i2c_client *client = data->client; + int err; + + /* + * Reset chip to defaults. + * This makes most other initializations unnecessary. + */ + err = i2c_smbus_write_byte_data(client, ADC128_REG_CONFIG, 0x80); + if (err) + return err; + + /* Start monitoring */ + err = i2c_smbus_write_byte_data(client, ADC128_REG_CONFIG, 0x01); + if (err) + return err; + + /* If external vref is selected, configure the chip to use it */ + if (data->regulator) { + err = i2c_smbus_write_byte_data(client, + ADC128_REG_CONFIG_ADV, 0x01); + if (err) + return err; + } + + return 0; +} + +static int adc128_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct regulator *regulator; + struct device *hwmon_dev; + struct adc128_data *data; + int err, vref; + + data = devm_kzalloc(dev, sizeof(struct adc128_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* vref is optional. If specified, is used as chip reference voltage */ + regulator = devm_regulator_get_optional(dev, "vref"); + if (!IS_ERR(regulator)) { + data->regulator = regulator; + err = regulator_enable(regulator); + if (err < 0) + return err; + vref = regulator_get_voltage(regulator); + if (vref < 0) { + err = vref; + goto error; + } + data->vref = DIV_ROUND_CLOSEST(vref, 1000); + } else { + data->vref = 2560; /* 2.56V, in mV */ + } + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Initialize the chip */ + err = adc128_init_client(data); + if (err < 0) + goto error; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, adc128_groups); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + goto error; + } + + return 0; + +error: + if (data->regulator) + regulator_disable(data->regulator); + return err; +} + +static int adc128_remove(struct i2c_client *client) +{ + struct adc128_data *data = i2c_get_clientdata(client); + + if (data->regulator) + regulator_disable(data->regulator); + + return 0; +} + +static const struct i2c_device_id adc128_id[] = { + { "adc128d818", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adc128_id); + +static struct i2c_driver adc128_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adc128d818", + }, + .probe = adc128_probe, + .remove = adc128_remove, + .id_table = adc128_id, + .detect = adc128_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(adc128_driver); + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("Driver for ADC128D818"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 29dd9f746df..3eb4281689b 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -79,9 +79,11 @@ enum chips { /* Each client has this additional data */ struct adm1021_data { - struct device *hwmon_dev; + struct i2c_client *client; enum chips type; + const struct attribute_group *groups[3]; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ char low_power; /* !=0 if device in low power mode */ @@ -101,7 +103,6 @@ static int adm1021_probe(struct i2c_client *client, static int adm1021_detect(struct i2c_client *client, struct i2c_board_info *info); static void adm1021_init_client(struct i2c_client *client); -static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ @@ -128,7 +129,6 @@ static struct i2c_driver adm1021_driver = { .name = "adm1021", }, .probe = adm1021_probe, - .remove = adm1021_remove, .id_table = adm1021_id, .detect = adm1021_detect, .address_list = normal_i2c, @@ -182,8 +182,8 @@ static ssize_t set_temp_max(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); + struct adm1021_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long temp; int err; @@ -207,8 +207,8 @@ static ssize_t set_temp_min(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); + struct adm1021_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long temp; int err; @@ -238,8 +238,8 @@ static ssize_t set_low_power(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); + struct adm1021_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; char low_power; unsigned long val; int err; @@ -412,15 +412,15 @@ static int adm1021_detect(struct i2c_client *client, static int adm1021_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct adm1021_data *data; - int err; + struct device *hwmon_dev; - data = devm_kzalloc(&client->dev, sizeof(struct adm1021_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct adm1021_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); + data->client = client; data->type = id->driver_data; mutex_init(&data->update_lock); @@ -428,29 +428,14 @@ static int adm1021_probe(struct i2c_client *client, if (data->type != lm84 && !read_only) adm1021_init_client(client); - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &adm1021_group); - if (err) - return err; - - if (data->type != lm84) { - err = sysfs_create_group(&client->dev.kobj, &adm1021_min_group); - if (err) - goto error; - } + data->groups[0] = &adm1021_group; + if (data->type != lm84) + data->groups[1] = &adm1021_min_group; - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto error; - } + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); - return 0; - -error: - sysfs_remove_group(&client->dev.kobj, &adm1021_min_group); - sysfs_remove_group(&client->dev.kobj, &adm1021_group); - return err; + return PTR_ERR_OR_ZERO(hwmon_dev); } static void adm1021_init_client(struct i2c_client *client) @@ -462,21 +447,10 @@ static void adm1021_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); } -static int adm1021_remove(struct i2c_client *client) -{ - struct adm1021_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &adm1021_min_group); - sysfs_remove_group(&client->dev.kobj, &adm1021_group); - - return 0; -} - static struct adm1021_data *adm1021_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); + struct adm1021_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; mutex_lock(&data->update_lock); @@ -484,7 +458,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) || !data->valid) { int i; - dev_dbg(&client->dev, "Starting adm1021 update\n"); + dev_dbg(dev, "Starting adm1021 update\n"); for (i = 0; i < 2; i++) { data->temp[i] = 1000 * diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c index 8d9f2a0e8ef..71463689d16 100644 --- a/drivers/hwmon/asc7621.c +++ b/drivers/hwmon/asc7621.c @@ -1115,7 +1115,6 @@ asc7621_probe(struct i2c_client *client, const struct i2c_device_id *id) return -ENOMEM; i2c_set_clientdata(client, data); - data->valid = 0; mutex_init(&data->update_lock); /* Initialize the asc7621 chip */ diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index ddff02e3e66..6edce42c61d 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -353,8 +353,6 @@ static int atxp1_probe(struct i2c_client *new_client, data->vrm = vid_which_vrm(); i2c_set_clientdata(new_client, data); - data->valid = 0; - mutex_init(&data->update_lock); /* Register sysfs hooks */ diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index bbb0b0d463f..f31bc4c4864 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -94,6 +94,8 @@ struct temp_data { bool valid; struct sensor_device_attribute sd_attrs[TOTAL_ATTRS]; char attr_name[TOTAL_ATTRS][CORETEMP_NAME_LENGTH]; + struct attribute *attrs[TOTAL_ATTRS + 1]; + struct attribute_group attr_group; struct mutex update_lock; }; @@ -114,12 +116,6 @@ struct pdev_entry { static LIST_HEAD(pdev_list); static DEFINE_MUTEX(pdev_list_mutex); -static ssize_t show_name(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - return sprintf(buf, "%s\n", DRVNAME); -} - static ssize_t show_label(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -393,20 +389,10 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) return adjust_tjmax(c, id, dev); } -static int create_name_attr(struct platform_data *pdata, - struct device *dev) -{ - sysfs_attr_init(&pdata->name_attr.attr); - pdata->name_attr.attr.name = "name"; - pdata->name_attr.attr.mode = S_IRUGO; - pdata->name_attr.show = show_name; - return device_create_file(dev, &pdata->name_attr); -} - static int create_core_attrs(struct temp_data *tdata, struct device *dev, int attr_no) { - int err, i; + int i; static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev, struct device_attribute *devattr, char *buf) = { show_label, show_crit_alarm, show_temp, show_tjmax, @@ -424,16 +410,10 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; tdata->sd_attrs[i].index = attr_no; - err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr); - if (err) - goto exit_free; + tdata->attrs[i] = &tdata->sd_attrs[i].dev_attr.attr; } - return 0; - -exit_free: - while (--i >= 0) - device_remove_file(dev, &tdata->sd_attrs[i].dev_attr); - return err; + tdata->attr_group.attrs = tdata->attrs; + return sysfs_create_group(&dev->kobj, &tdata->attr_group); } @@ -548,7 +528,7 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu, pdata->core_data[attr_no] = tdata; /* Create sysfs interfaces */ - err = create_core_attrs(tdata, &pdev->dev, attr_no); + err = create_core_attrs(tdata, pdata->hwmon_dev, attr_no); if (err) goto exit_free; @@ -573,14 +553,12 @@ static void coretemp_add_core(unsigned int cpu, int pkg_flag) } static void coretemp_remove_core(struct platform_data *pdata, - struct device *dev, int indx) + int indx) { - int i; struct temp_data *tdata = pdata->core_data[indx]; /* Remove the sysfs attributes */ - for (i = 0; i < tdata->attr_size; i++) - device_remove_file(dev, &tdata->sd_attrs[i].dev_attr); + sysfs_remove_group(&pdata->hwmon_dev->kobj, &tdata->attr_group); kfree(pdata->core_data[indx]); pdata->core_data[indx] = NULL; @@ -588,34 +566,20 @@ static void coretemp_remove_core(struct platform_data *pdata, static int coretemp_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct platform_data *pdata; - int err; /* Initialize the per-package data structures */ - pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL); + pdata = devm_kzalloc(dev, sizeof(struct platform_data), GFP_KERNEL); if (!pdata) return -ENOMEM; - err = create_name_attr(pdata, &pdev->dev); - if (err) - goto exit_free; - pdata->phys_proc_id = pdev->id; platform_set_drvdata(pdev, pdata); - pdata->hwmon_dev = hwmon_device_register(&pdev->dev); - if (IS_ERR(pdata->hwmon_dev)) { - err = PTR_ERR(pdata->hwmon_dev); - dev_err(&pdev->dev, "Class registration failed (%d)\n", err); - goto exit_name; - } - return 0; - -exit_name: - device_remove_file(&pdev->dev, &pdata->name_attr); -exit_free: - kfree(pdata); - return err; + pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME, + pdata, NULL); + return PTR_ERR_OR_ZERO(pdata->hwmon_dev); } static int coretemp_remove(struct platform_device *pdev) @@ -625,11 +589,8 @@ static int coretemp_remove(struct platform_device *pdev) for (i = MAX_CORE_DATA - 1; i >= 0; --i) if (pdata->core_data[i]) - coretemp_remove_core(pdata, &pdev->dev, i); + coretemp_remove_core(pdata, i); - device_remove_file(&pdev->dev, &pdata->name_attr); - hwmon_device_unregister(pdata->hwmon_dev); - kfree(pdata); return 0; } @@ -777,7 +738,7 @@ static void put_core_offline(unsigned int cpu) return; if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu) - coretemp_remove_core(pdata, &pdev->dev, indx); + coretemp_remove_core(pdata, indx); /* * If a HT sibling of a core is taken offline, but another HT sibling diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index 2c137b26acb..fd892dd48e4 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -349,7 +349,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, dev_dbg(&client->dev, "reg 0x%02x, err %d\n", REG_FAN_CONF1, status); mutex_unlock(&data->update_lock); - return -EIO; + return status; } status &= 0x9F; status |= (new_range_bits << 5); diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 1a8aa126526..32f5132c465 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -1648,7 +1648,7 @@ static void __exit f71805f_exit(void) platform_driver_unregister(&f71805f_driver); } -MODULE_AUTHOR("Jean Delvare <khali@linux-fr>"); +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver"); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index e176a43af63..a26c385a435 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -22,6 +22,7 @@ #include <linux/gfp.h> #include <linux/spinlock.h> #include <linux/pci.h> +#include <linux/string.h> #define HWMON_ID_PREFIX "hwmon" #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" @@ -99,6 +100,10 @@ hwmon_device_register_with_groups(struct device *dev, const char *name, struct hwmon_device *hwdev; int err, id; + /* Do not accept invalid characters in hwmon name attribute */ + if (name && (!strlen(name) || strpbrk(name, "-* \t\n"))) + return ERR_PTR(-EINVAL); + id = ida_simple_get(&hwmon_ida, 0, 0, GFP_KERNEL); if (id < 0) return ERR_PTR(id); diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c new file mode 100644 index 00000000000..b7b1297a9b0 --- /dev/null +++ b/drivers/hwmon/ibmpowernv.c @@ -0,0 +1,529 @@ +/* + * hwmon driver for temperature/power/fan on IBM PowerNV platform + * Copyright (C) 2013 IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/of.h> +#include <linux/slab.h> + +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <asm/opal.h> +#include <linux/err.h> + +MODULE_DESCRIPTION("IBM PowerNV Platform power/temp/fan sensor hwmon module"); +MODULE_LICENSE("GPL"); + +#define MAX_ATTR_LENGTH 32 + +/* Device tree sensor name prefixes. The device tree has the names in the + * format "cooling-fan#2-faulted" where the "cooling-fan" is the sensor type, + * 2 is the sensor count, and "faulted" is the sensor data attribute type. + */ +#define DT_FAULT_ATTR_SUFFIX "faulted" +#define DT_DATA_ATTR_SUFFIX "data" +#define DT_THRESHOLD_ATTR_SUFFIX "thrs" + +enum sensors { + FAN, + TEMPERATURE, + POWERSUPPLY, + POWER, + MAX_SENSOR_TYPE, +}; + +enum attributes { + INPUT, + MINIMUM, + MAXIMUM, + FAULT, + MAX_ATTR_TYPES +}; + +static struct sensor_name { + char *name; + char *compaible; +} sensor_names[] = { + {"fan-sensor", "ibm,opal-sensor-cooling-fan"}, + {"amb-temp-sensor", "ibm,opal-sensor-amb-temp"}, + {"power-sensor", "ibm,opal-sensor-power-supply"}, + {"power", "ibm,opal-sensor-power"} +}; + +static const char * const attribute_type_table[] = { + "input", + "min", + "max", + "fault", + NULL +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + enum sensors type; +}; + +static LIST_HEAD(pdev_list); + +/* The sensors are categorised on type. + * + * The sensors of same type are categorised under a common platform device. + * So, The pdev is shared by all sensors of same type. + * Ex : temp1_input, temp1_max, temp2_input,temp2_max all share same platform + * device. + * + * "sensor_data" is the Platform device specific data. + * There is one hwmon_device instance for all the sensors of same type. + * This also holds the list of all sensors with same type but different + * attribute and index. + */ +struct sensor_specific_data { + u32 sensor_id; /* The hex value as in the device tree */ + u32 sensor_index; /* The sensor instance index */ + struct sensor_device_attribute sd_attr; + enum attributes attr_type; + char attr_name[64]; +}; + +struct sensor_data { + struct device *hwmon_dev; + struct list_head sensor_list; + struct device_attribute name_attr; +}; + +struct sensor_entry { + struct list_head list; + struct sensor_specific_data *sensor_data; +}; + +static struct platform_device *powernv_sensor_get_pdev(enum sensors type) +{ + struct pdev_entry *p; + list_for_each_entry(p, &pdev_list, list) + if (p->type == type) + return p->pdev; + + return NULL; +} + +static struct sensor_specific_data *powernv_sensor_get_sensor_data( + struct sensor_data *pdata, + int index, enum attributes attr_type) +{ + struct sensor_entry *p; + list_for_each_entry(p, &pdata->sensor_list, list) + if ((p->sensor_data->sensor_index == index) && + (attr_type == p->sensor_data->attr_type)) + return p->sensor_data; + + return NULL; +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + + return sprintf(buf, "%s\n", pdev->name); +} + +/* Note: Data from the sensors for each sensor type needs to be converted to + * the dimension appropriate. + */ +static ssize_t show_sensor(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(devattr); + struct platform_device *pdev = to_platform_device(dev); + struct sensor_data *pdata = platform_get_drvdata(pdev); + struct sensor_specific_data *tdata = NULL; + enum sensors sensor_type = pdev->id; + u32 x = -1; + int ret; + + if (sd_attr && sd_attr->dev_attr.attr.name) { + char *pos = strchr(sd_attr->dev_attr.attr.name, '_'); + int i; + + for (i = 0; i < MAX_ATTR_TYPES; i++) { + if (strcmp(pos+1, attribute_type_table[i]) == 0) { + tdata = powernv_sensor_get_sensor_data(pdata, + sd_attr->index, i); + break; + } + } + } + + if (tdata) { + ret = opal_get_sensor_data(tdata->sensor_id, &x); + if (ret) + x = -1; + } + + if (sensor_type == TEMPERATURE && x > 0) { + /* Temperature comes in Degrees and convert it to + * milli-degrees. + */ + x = x*1000; + } else if (sensor_type == POWER && x > 0) { + /* Power value comes in watts, convert to micro-watts */ + x = x * 1000000; + } + + return sprintf(buf, "%d\n", x); +} + +static u32 get_sensor_index_from_name(const char *name) +{ + char *hash_position = strchr(name, '#'); + u32 index = 0, copy_length; + char newbuf[8]; + + if (hash_position) { + copy_length = strchr(hash_position, '-') - hash_position - 1; + if (copy_length < sizeof(newbuf)) { + strncpy(newbuf, hash_position + 1, copy_length); + sscanf(newbuf, "%d", &index); + } + } + + return index; +} + +static inline void get_sensor_suffix_from_name(const char *name, char *suffix) +{ + char *dash_position = strrchr(name, '-'); + if (dash_position) + strncpy(suffix, dash_position+1, MAX_ATTR_LENGTH); + else + strcpy(suffix,""); +} + +static int get_sensor_attr_properties(const char *sensor_name, + enum sensors sensor_type, enum attributes *attr_type, + u32 *sensor_index) +{ + char suffix[MAX_ATTR_LENGTH]; + + *attr_type = MAX_ATTR_TYPES; + *sensor_index = get_sensor_index_from_name(sensor_name); + if (*sensor_index == 0) + return -EINVAL; + + get_sensor_suffix_from_name(sensor_name, suffix); + if (strcmp(suffix, "") == 0) + return -EINVAL; + + if (strcmp(suffix, DT_FAULT_ATTR_SUFFIX) == 0) + *attr_type = FAULT; + else if (strcmp(suffix, DT_DATA_ATTR_SUFFIX) == 0) + *attr_type = INPUT; + else if ((sensor_type == TEMPERATURE) && + (strcmp(suffix, DT_THRESHOLD_ATTR_SUFFIX) == 0)) + *attr_type = MAXIMUM; + else if ((sensor_type == FAN) && + (strcmp(suffix, DT_THRESHOLD_ATTR_SUFFIX) == 0)) + *attr_type = MINIMUM; + else + return -ENOENT; + + if (((sensor_type == FAN) && ((*attr_type == INPUT) || + (*attr_type == MINIMUM))) + || ((sensor_type == TEMPERATURE) && ((*attr_type == INPUT) || + (*attr_type == MAXIMUM))) + || ((sensor_type == POWER) && ((*attr_type == INPUT)))) + return 0; + + return -ENOENT; +} + +static int create_sensor_attr(struct sensor_specific_data *tdata, + struct device *dev, enum sensors sensor_type, + enum attributes attr_type) +{ + int err = 0; + char temp_file_prefix[50]; + static const char *const file_name_format = "%s%d_%s"; + + tdata->attr_type = attr_type; + + if (sensor_type == FAN) + strcpy(temp_file_prefix, "fan"); + else if (sensor_type == TEMPERATURE) + strcpy(temp_file_prefix, "temp"); + else if (sensor_type == POWERSUPPLY) + strcpy(temp_file_prefix, "powersupply"); + else if (sensor_type == POWER) + strcpy(temp_file_prefix, "power"); + + snprintf(tdata->attr_name, sizeof(tdata->attr_name), file_name_format, + temp_file_prefix, tdata->sensor_index, + attribute_type_table[tdata->attr_type]); + + sysfs_attr_init(&tdata->sd_attr.dev_attr.attr); + tdata->sd_attr.dev_attr.attr.name = tdata->attr_name; + tdata->sd_attr.dev_attr.attr.mode = S_IRUGO; + tdata->sd_attr.dev_attr.show = show_sensor; + + tdata->sd_attr.index = tdata->sensor_index; + err = device_create_file(dev, &tdata->sd_attr.dev_attr); + + return err; +} + +static int create_name_attr(struct sensor_data *pdata, + struct device *dev) +{ + sysfs_attr_init(&pdata->name_attr.attr); + pdata->name_attr.attr.name = "name"; + pdata->name_attr.attr.mode = S_IRUGO; + pdata->name_attr.show = show_name; + return device_create_file(dev, &pdata->name_attr); +} + +static int create_platform_device(enum sensors sensor_type, + struct platform_device **pdev) +{ + struct pdev_entry *pdev_entry = NULL; + int err; + + *pdev = platform_device_alloc(sensor_names[sensor_type].name, + sensor_type); + if (!*pdev) { + pr_err("Device allocation failed\n"); + err = -ENOMEM; + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + pr_err("Device allocation failed\n"); + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(*pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_free; + } + + pdev_entry->pdev = *pdev; + pdev_entry->type = (*pdev)->id; + + list_add_tail(&pdev_entry->list, &pdev_list); + + return 0; +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(*pdev); +exit: + return err; +} + +static int create_sensor_data(struct platform_device *pdev) +{ + struct sensor_data *pdata = NULL; + int err = 0; + + pdata = kzalloc(sizeof(struct sensor_data), GFP_KERNEL); + if (!pdata) { + err = -ENOMEM; + goto exit; + } + + err = create_name_attr(pdata, &pdev->dev); + if (err) + goto exit_free; + + pdata->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(pdata->hwmon_dev)) { + err = PTR_ERR(pdata->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", + err); + goto exit_name; + } + + INIT_LIST_HEAD(&pdata->sensor_list); + platform_set_drvdata(pdev, pdata); + + return 0; + +exit_name: + device_remove_file(&pdev->dev, &pdata->name_attr); +exit_free: + kfree(pdata); +exit: + return err; +} + +static void delete_sensor_attr(struct sensor_data *pdata) +{ + struct sensor_entry *s, *l; + + list_for_each_entry_safe(s, l, &pdata->sensor_list, list) { + struct sensor_specific_data *tdata = s->sensor_data; + kfree(tdata); + list_del(&s->list); + kfree(s); + } +} + +static int powernv_sensor_init(u32 sensor_id, const struct device_node *np, + enum sensors sensor_type, enum attributes attr_type, + u32 sensor_index) +{ + struct platform_device *pdev = powernv_sensor_get_pdev(sensor_type); + struct sensor_specific_data *tdata; + struct sensor_entry *sensor_entry; + struct sensor_data *pdata; + int err = 0; + + if (!pdev) { + err = create_platform_device(sensor_type, &pdev); + if (err) + goto exit; + + err = create_sensor_data(pdev); + if (err) + goto exit; + } + + pdata = platform_get_drvdata(pdev); + if (!pdata) { + err = -ENOMEM; + goto exit; + } + + tdata = kzalloc(sizeof(struct sensor_specific_data), GFP_KERNEL); + if (!tdata) { + err = -ENOMEM; + goto exit; + } + + tdata->sensor_id = sensor_id; + tdata->sensor_index = sensor_index; + + err = create_sensor_attr(tdata, &pdev->dev, sensor_type, attr_type); + if (err) + goto exit_free; + + sensor_entry = kzalloc(sizeof(struct sensor_entry), GFP_KERNEL); + if (!sensor_entry) { + err = -ENOMEM; + goto exit_attr; + } + + sensor_entry->sensor_data = tdata; + + list_add_tail(&sensor_entry->list, &pdata->sensor_list); + + return 0; +exit_attr: + device_remove_file(&pdev->dev, &tdata->sd_attr.dev_attr); +exit_free: + kfree(tdata); +exit: + return err; +} + +static void delete_unregister_sensors(void) +{ + struct pdev_entry *p, *n; + + list_for_each_entry_safe(p, n, &pdev_list, list) { + struct sensor_data *pdata = platform_get_drvdata(p->pdev); + if (pdata) { + delete_sensor_attr(pdata); + + hwmon_device_unregister(pdata->hwmon_dev); + kfree(pdata); + } + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } +} + +static int __init powernv_hwmon_init(void) +{ + struct device_node *opal, *np = NULL; + enum attributes attr_type; + enum sensors type; + const u32 *sensor_id; + u32 sensor_index; + int err; + + opal = of_find_node_by_path("/ibm,opal/sensors"); + if (!opal) { + pr_err("%s: Opal 'sensors' node not found\n", __func__); + return -ENXIO; + } + + for_each_child_of_node(opal, np) { + if (np->name == NULL) + continue; + + for (type = 0; type < MAX_SENSOR_TYPE; type++) + if (of_device_is_compatible(np, + sensor_names[type].compaible)) + break; + + if (type == MAX_SENSOR_TYPE) + continue; + + if (get_sensor_attr_properties(np->name, type, &attr_type, + &sensor_index)) + continue; + + sensor_id = of_get_property(np, "sensor-id", NULL); + if (!sensor_id) { + pr_info("%s: %s doesn't have sensor-id\n", __func__, + np->name); + continue; + } + + err = powernv_sensor_init(*sensor_id, np, type, attr_type, + sensor_index); + if (err) { + of_node_put(opal); + goto exit; + } + } + of_node_put(opal); + + return 0; +exit: + delete_unregister_sensors(); + return err; + +} + +static void powernv_hwmon_exit(void) +{ + delete_unregister_sensors(); +} + +module_init(powernv_hwmon_init); +module_exit(powernv_hwmon_exit); diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 708081b68c6..9fbb1b1fdff 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -31,6 +31,7 @@ struct iio_hwmon_state { int num_channels; struct device *hwmon_dev; struct attribute_group attr_group; + const struct attribute_group *groups[2]; struct attribute **attrs; }; @@ -56,19 +57,6 @@ static ssize_t iio_hwmon_read_val(struct device *dev, return sprintf(buf, "%d\n", result); } -static ssize_t show_name(struct device *dev, struct device_attribute *attr, - char *buf) -{ - const char *name = "iio_hwmon"; - - if (dev->of_node && dev->of_node->name) - name = dev->of_node->name; - - return sprintf(buf, "%s\n", name); -} - -static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); - static int iio_hwmon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -78,6 +66,10 @@ static int iio_hwmon_probe(struct platform_device *pdev) int in_i = 1, temp_i = 1, curr_i = 1; enum iio_chan_type type; struct iio_channel *channels; + const char *name = "iio_hwmon"; + + if (dev->of_node && dev->of_node->name) + name = dev->of_node->name; channels = iio_channel_get_all(dev); if (IS_ERR(channels)) @@ -96,7 +88,7 @@ static int iio_hwmon_probe(struct platform_device *pdev) st->num_channels++; st->attrs = devm_kzalloc(dev, - sizeof(*st->attrs) * (st->num_channels + 2), + sizeof(*st->attrs) * (st->num_channels + 1), GFP_KERNEL); if (st->attrs == NULL) { ret = -ENOMEM; @@ -144,22 +136,18 @@ static int iio_hwmon_probe(struct platform_device *pdev) a->index = i; st->attrs[i] = &a->dev_attr.attr; } - st->attrs[st->num_channels] = &dev_attr_name.attr; - st->attr_group.attrs = st->attrs; - platform_set_drvdata(pdev, st); - ret = sysfs_create_group(&dev->kobj, &st->attr_group); - if (ret < 0) - goto error_release_channels; - st->hwmon_dev = hwmon_device_register(dev); + st->attr_group.attrs = st->attrs; + st->groups[0] = &st->attr_group; + st->hwmon_dev = hwmon_device_register_with_groups(dev, name, st, + st->groups); if (IS_ERR(st->hwmon_dev)) { ret = PTR_ERR(st->hwmon_dev); - goto error_remove_group; + goto error_release_channels; } + platform_set_drvdata(pdev, st); return 0; -error_remove_group: - sysfs_remove_group(&dev->kobj, &st->attr_group); error_release_channels: iio_channel_release_all(channels); return ret; @@ -170,7 +158,6 @@ static int iio_hwmon_remove(struct platform_device *pdev) struct iio_hwmon_state *st = platform_get_drvdata(pdev); hwmon_device_unregister(st->hwmon_dev); - sysfs_remove_group(&pdev->dev.kobj, &st->attr_group); iio_channel_release_all(st->channels); return 0; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 70749fc15a4..a327fd3402a 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -11,6 +11,7 @@ * similar parts. The other devices are supported by different drivers. * * Supports: IT8603E Super I/O chip w/LPC interface + * IT8623E Super I/O chip w/LPC interface * IT8705F Super I/O chip w/LPC interface * IT8712F Super I/O chip w/LPC interface * IT8716F Super I/O chip w/LPC interface @@ -147,7 +148,8 @@ static inline void superio_exit(void) #define IT8772E_DEVID 0x8772 #define IT8782F_DEVID 0x8782 #define IT8783E_DEVID 0x8783 -#define IT8306E_DEVID 0x8603 +#define IT8603E_DEVID 0x8603 +#define IT8623E_DEVID 0x8623 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 @@ -1431,7 +1433,7 @@ static ssize_t show_label(struct device *dev, struct device_attribute *attr, static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0); static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1); static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2); -/* special AVCC3 IT8306E in9 */ +/* special AVCC3 IT8603E in9 */ static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 0); static ssize_t show_name(struct device *dev, struct device_attribute @@ -1766,7 +1768,8 @@ static int __init it87_find(unsigned short *address, case IT8783E_DEVID: sio_data->type = it8783; break; - case IT8306E_DEVID: + case IT8603E_DEVID: + case IT8623E_DEVID: sio_data->type = it8603; break; case 0xffff: /* No device at all */ diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index a183e488db7..7488e36809c 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -28,7 +28,6 @@ #include <linux/hwmon.h> struct jz4740_hwmon { - struct resource *mem; void __iomem *base; int irq; @@ -106,6 +105,7 @@ static int jz4740_hwmon_probe(struct platform_device *pdev) { int ret; struct jz4740_hwmon *hwmon; + struct resource *mem; hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); if (!hwmon) @@ -120,25 +120,10 @@ static int jz4740_hwmon_probe(struct platform_device *pdev) return hwmon->irq; } - hwmon->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!hwmon->mem) { - dev_err(&pdev->dev, "Failed to get platform mmio resource\n"); - return -ENOENT; - } - - hwmon->mem = devm_request_mem_region(&pdev->dev, hwmon->mem->start, - resource_size(hwmon->mem), pdev->name); - if (!hwmon->mem) { - dev_err(&pdev->dev, "Failed to request mmio memory region\n"); - return -EBUSY; - } - - hwmon->base = devm_ioremap_nocache(&pdev->dev, hwmon->mem->start, - resource_size(hwmon->mem)); - if (!hwmon->base) { - dev_err(&pdev->dev, "Failed to ioremap mmio memory\n"); - return -EBUSY; - } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hwmon->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(hwmon->base)) + return PTR_ERR(hwmon->base); init_completion(&hwmon->read_completion); mutex_init(&hwmon->lock); diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index baf375b5ab0..f7b46f68ef4 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -212,6 +212,7 @@ static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, {} }; MODULE_DEVICE_TABLE(pci, k10temp_id_table); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index b4ad598feb6..848b9611151 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -155,8 +155,9 @@ enum chips { lm63, lm64, lm96163 }; */ struct lm63_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; + const struct attribute_group *groups[5]; char valid; /* zero until following fields are valid */ char lut_valid; /* zero until lut fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -218,9 +219,9 @@ static inline int lut_temp_to_reg(struct lm63_data *data, long val) * Update the lookup table register cache. * client->update_lock must be held when calling this function. */ -static void lm63_update_lut(struct i2c_client *client) +static void lm63_update_lut(struct lm63_data *data) { - struct lm63_data *data = i2c_get_clientdata(client); + struct i2c_client *client = data->client; int i; if (time_after(jiffies, data->lut_last_updated + 5 * HZ) || @@ -241,8 +242,8 @@ static void lm63_update_lut(struct i2c_client *client) static struct lm63_data *lm63_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long next_update; mutex_lock(&data->update_lock); @@ -310,7 +311,7 @@ static struct lm63_data *lm63_update_device(struct device *dev) data->valid = 1; } - lm63_update_lut(client); + lm63_update_lut(data); mutex_unlock(&data->update_lock); @@ -321,18 +322,17 @@ static struct lm63_data *lm63_update_device(struct device *dev) * Trip points in the lookup table should be in ascending order for both * temperatures and PWM output values. */ -static int lm63_lut_looks_bad(struct i2c_client *client) +static int lm63_lut_looks_bad(struct device *dev, struct lm63_data *data) { - struct lm63_data *data = i2c_get_clientdata(client); int i; mutex_lock(&data->update_lock); - lm63_update_lut(client); + lm63_update_lut(data); for (i = 1; i < data->lut_size; i++) { if (data->pwm1[1 + i - 1] > data->pwm1[1 + i] || data->temp8[3 + i - 1] > data->temp8[3 + i]) { - dev_warn(&client->dev, + dev_warn(dev, "Lookup table doesn't look sane (check entries %d and %d)\n", i, i + 1); break; @@ -358,8 +358,8 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int err; @@ -399,8 +399,8 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int nr = attr->index; unsigned long val; int err; @@ -435,8 +435,8 @@ static ssize_t set_pwm1_enable(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int err; @@ -450,7 +450,7 @@ static ssize_t set_pwm1_enable(struct device *dev, * Only let the user switch to automatic mode if the lookup table * looks sane. */ - if (val == 2 && lm63_lut_looks_bad(client)) + if (val == 2 && lm63_lut_looks_bad(dev, data)) return -EPERM; mutex_lock(&data->update_lock); @@ -461,7 +461,7 @@ static ssize_t set_pwm1_enable(struct device *dev, else data->config_fan &= ~0x20; i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN, - data->config_fan); + data->config_fan); mutex_unlock(&data->update_lock); return count; } @@ -505,8 +505,8 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int nr = attr->index; long val; int err; @@ -579,8 +579,8 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long val; int err; int nr = attr->index; @@ -635,8 +635,8 @@ static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long val; int err; long hyst; @@ -657,11 +657,11 @@ static ssize_t set_temp2_crit_hyst(struct device *dev, * Set conversion rate. * client->update_lock must be held when calling this function. */ -static void lm63_set_convrate(struct i2c_client *client, struct lm63_data *data, - unsigned int interval) +static void lm63_set_convrate(struct lm63_data *data, unsigned int interval) { - int i; + struct i2c_client *client = data->client; unsigned int update_interval; + int i; /* Shift calculations to avoid rounding errors */ interval <<= 6; @@ -689,8 +689,7 @@ static ssize_t set_update_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); unsigned long val; int err; @@ -699,7 +698,7 @@ static ssize_t set_update_interval(struct device *dev, return err; mutex_lock(&data->update_lock); - lm63_set_convrate(client, data, clamp_val(val, 0, 100000)); + lm63_set_convrate(data, clamp_val(val, 0, 100000)); mutex_unlock(&data->update_lock); return count; @@ -708,8 +707,7 @@ static ssize_t set_update_interval(struct device *dev, static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); return sprintf(buf, data->trutherm ? "1\n" : "2\n"); } @@ -717,8 +715,8 @@ static ssize_t show_type(struct device *dev, struct device_attribute *attr, static ssize_t set_type(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int ret; u8 reg; @@ -915,6 +913,15 @@ static struct attribute *lm63_attributes[] = { NULL }; +static struct attribute *lm63_attributes_temp2_type[] = { + &dev_attr_temp2_type.attr, + NULL +}; + +static const struct attribute_group lm63_group_temp2_type = { + .attrs = lm63_attributes_temp2_type, +}; + static struct attribute *lm63_attributes_extra_lut[] = { &sensor_dev_attr_pwm1_auto_point9_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point9_temp.dev_attr.attr, @@ -946,8 +953,7 @@ static umode_t lm63_attribute_mode(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = container_of(kobj, struct device, kobj); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); + struct lm63_data *data = dev_get_drvdata(dev); if (attr == &sensor_dev_attr_temp2_crit.dev_attr.attr && (data->kind == lm64 || @@ -1026,9 +1032,10 @@ static int lm63_detect(struct i2c_client *client, * Ideally we shouldn't have to initialize anything, since the BIOS * should have taken care of everything */ -static void lm63_init_client(struct i2c_client *client) +static void lm63_init_client(struct lm63_data *data) { - struct lm63_data *data = i2c_get_clientdata(client); + struct i2c_client *client = data->client; + struct device *dev = &client->dev; u8 convrate; data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); @@ -1037,7 +1044,7 @@ static void lm63_init_client(struct i2c_client *client) /* Start converting if needed */ if (data->config & 0x40) { /* standby */ - dev_dbg(&client->dev, "Switching to operational mode\n"); + dev_dbg(dev, "Switching to operational mode\n"); data->config &= 0xA7; i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, data->config); @@ -1090,13 +1097,13 @@ static void lm63_init_client(struct i2c_client *client) /* Show some debug info about the LM63 configuration */ if (data->kind == lm63) - dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", + dev_dbg(dev, "Alert/tach pin configured for %s\n", (data->config & 0x04) ? "tachometer input" : "alert output"); - dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", + dev_dbg(dev, "PWM clock %s kHz, output frequency %u Hz\n", (data->config_fan & 0x08) ? "1.4" : "360", ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); - dev_dbg(&client->dev, "PWM output active %s, %s mode\n", + dev_dbg(dev, "PWM output active %s, %s mode\n", (data->config_fan & 0x10) ? "low" : "high", (data->config_fan & 0x20) ? "manual" : "auto"); } @@ -1104,15 +1111,16 @@ static void lm63_init_client(struct i2c_client *client) static int lm63_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; + struct device *hwmon_dev; struct lm63_data *data; - int err; + int groups = 0; - data = devm_kzalloc(&client->dev, sizeof(struct lm63_data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct lm63_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); - data->valid = 0; + data->client = client; mutex_init(&data->update_lock); /* Set the device type */ @@ -1121,59 +1129,21 @@ static int lm63_probe(struct i2c_client *client, data->temp2_offset = 16000; /* Initialize chip */ - lm63_init_client(client); + lm63_init_client(data); /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &lm63_group); - if (err) - return err; - if (data->config & 0x04) { /* tachometer enabled */ - err = sysfs_create_group(&client->dev.kobj, &lm63_group_fan1); - if (err) - goto exit_remove_files; - } - if (data->kind == lm96163) { - err = device_create_file(&client->dev, &dev_attr_temp2_type); - if (err) - goto exit_remove_files; - - err = sysfs_create_group(&client->dev.kobj, - &lm63_group_extra_lut); - if (err) - goto exit_remove_files; - } - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } + data->groups[groups++] = &lm63_group; + if (data->config & 0x04) /* tachometer enabled */ + data->groups[groups++] = &lm63_group_fan1; - return 0; - -exit_remove_files: - sysfs_remove_group(&client->dev.kobj, &lm63_group); - sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1); if (data->kind == lm96163) { - device_remove_file(&client->dev, &dev_attr_temp2_type); - sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut); + data->groups[groups++] = &lm63_group_temp2_type; + data->groups[groups++] = &lm63_group_extra_lut; } - return err; -} - -static int lm63_remove(struct i2c_client *client) -{ - struct lm63_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm63_group); - sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1); - if (data->kind == lm96163) { - device_remove_file(&client->dev, &dev_attr_temp2_type); - sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut); - } - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } /* @@ -1194,7 +1164,6 @@ static struct i2c_driver lm63_driver = { .name = "lm63", }, .probe = lm63_probe, - .remove = lm63_remove, .id_table = lm63_id, .detect = lm63_detect, .address_list = normal_i2c, diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index f17beb5e6dd..502771c06fd 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -348,7 +348,6 @@ static int lm77_probe(struct i2c_client *client, const struct i2c_device_id *id) return -ENOMEM; i2c_set_clientdata(client, data); - data->valid = 0; mutex_init(&data->update_lock); /* Initialize the LM77 chip */ diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index eba89aac3ec..bd0a1ebbf86 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -112,7 +112,7 @@ static inline long TEMP_FROM_REG(u16 temp) */ struct lm80_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; char error; /* !=0 if error occurred during last update */ char valid; /* !=0 if following fields are valid */ @@ -140,7 +140,6 @@ static int lm80_probe(struct i2c_client *client, const struct i2c_device_id *id); static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info); static void lm80_init_client(struct i2c_client *client); -static int lm80_remove(struct i2c_client *client); static struct lm80_data *lm80_update_device(struct device *dev); static int lm80_read_value(struct i2c_client *client, u8 reg); static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); @@ -162,7 +161,6 @@ static struct i2c_driver lm80_driver = { .name = "lm80", }, .probe = lm80_probe, - .remove = lm80_remove, .id_table = lm80_id, .detect = lm80_detect, .address_list = normal_i2c, @@ -191,8 +189,8 @@ static ssize_t set_in_##suffix(struct device *dev, \ struct device_attribute *attr, const char *buf, size_t count) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ + struct lm80_data *data = dev_get_drvdata(dev); \ + struct i2c_client *client = data->client; \ long val; \ int err = kstrtol(buf, 10, &val); \ if (err < 0) \ @@ -235,8 +233,8 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); + struct lm80_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int err = kstrtoul(buf, 10, &val); if (err < 0) @@ -259,8 +257,8 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); + struct lm80_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long min, val; u8 reg; int err = kstrtoul(buf, 10, &val); @@ -286,7 +284,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, data->fan_div[nr] = 3; break; default: - dev_err(&client->dev, + dev_err(dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", val); mutex_unlock(&data->update_lock); @@ -332,8 +330,8 @@ show_temp(os_hyst, temp_os_hyst); static ssize_t set_temp_##suffix(struct device *dev, \ struct device_attribute *attr, const char *buf, size_t count) \ { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ + struct lm80_data *data = dev_get_drvdata(dev); \ + struct i2c_client *client = data->client; \ long val; \ int err = kstrtol(buf, 10, &val); \ if (err < 0) \ @@ -440,7 +438,7 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 13); * Real code */ -static struct attribute *lm80_attributes[] = { +static struct attribute *lm80_attrs[] = { &sensor_dev_attr_in0_min.dev_attr.attr, &sensor_dev_attr_in1_min.dev_attr.attr, &sensor_dev_attr_in2_min.dev_attr.attr, @@ -487,10 +485,7 @@ static struct attribute *lm80_attributes[] = { &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, NULL }; - -static const struct attribute_group lm80_group = { - .attrs = lm80_attributes, -}; +ATTRIBUTE_GROUPS(lm80); /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info) @@ -541,14 +536,15 @@ static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info) static int lm80_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; + struct device *hwmon_dev; struct lm80_data *data; - int err; - data = devm_kzalloc(&client->dev, sizeof(struct lm80_data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); + data->client = client; mutex_init(&data->update_lock); /* Initialize the LM80 chip */ @@ -558,32 +554,10 @@ static int lm80_probe(struct i2c_client *client, data->fan_min[0] = lm80_read_value(client, LM80_REG_FAN_MIN(1)); data->fan_min[1] = lm80_read_value(client, LM80_REG_FAN_MIN(2)); - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &lm80_group); - if (err) - return err; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto error_remove; - } + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, lm80_groups); - return 0; - -error_remove: - sysfs_remove_group(&client->dev.kobj, &lm80_group); - return err; -} - -static int lm80_remove(struct i2c_client *client) -{ - struct lm80_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm80_group); - - return 0; + return PTR_ERR_OR_ZERO(hwmon_dev); } static int lm80_read_value(struct i2c_client *client, u8 reg) @@ -614,8 +588,8 @@ static void lm80_init_client(struct i2c_client *client) static struct lm80_data *lm80_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); + struct lm80_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int i; int rv; int prev_rv; @@ -627,7 +601,7 @@ static struct lm80_data *lm80_update_device(struct device *dev) lm80_init_client(client); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - dev_dbg(&client->dev, "Starting lm80 update\n"); + dev_dbg(dev, "Starting lm80 update\n"); for (i = 0; i <= 6; i++) { rv = lm80_read_value(client, LM80_REG_IN(i)); if (rv < 0) diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index abd270243ba..be02155788c 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -349,7 +349,6 @@ static int lm83_probe(struct i2c_client *new_client, return -ENOMEM; i2c_set_clientdata(new_client, data); - data->valid = 0; mutex_init(&data->update_lock); /* diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index 4c5f20231c1..ba1d83d4805 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -903,7 +903,6 @@ static int lm87_probe(struct i2c_client *client, const struct i2c_device_id *id) return -ENOMEM; i2c_set_clientdata(client, data); - data->valid = 0; mutex_init(&data->update_lock); /* Initialize the LM87 chip */ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 701e952ae52..c9ff08dbe10 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -365,7 +365,9 @@ enum lm90_temp11_reg_index { */ struct lm90_data { + struct i2c_client *client; struct device *hwmon_dev; + const struct attribute_group *groups[6]; struct mutex update_lock; struct regulator *regulator; char valid; /* zero until following fields are valid */ @@ -513,8 +515,8 @@ static void lm90_set_convrate(struct i2c_client *client, struct lm90_data *data, static struct lm90_data *lm90_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long next_update; mutex_lock(&data->update_lock); @@ -793,8 +795,8 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int nr = attr->index; long val; int err; @@ -860,8 +862,8 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, }; struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int nr = attr->nr; int index = attr->index; long val; @@ -922,8 +924,8 @@ static ssize_t show_temphyst(struct device *dev, static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long val; int err; int temp; @@ -976,8 +978,8 @@ static ssize_t set_update_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int err; @@ -1057,6 +1059,15 @@ static const struct attribute_group lm90_group = { .attrs = lm90_attributes, }; +static struct attribute *lm90_temp2_offset_attributes[] = { + &sensor_dev_attr_temp2_offset.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm90_temp2_offset_group = { + .attrs = lm90_temp2_offset_attributes, +}; + /* * Additional attributes for devices with emergency sensors */ @@ -1393,22 +1404,6 @@ static int lm90_detect(struct i2c_client *client, return 0; } -static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data) -{ - struct device *dev = &client->dev; - - if (data->flags & LM90_HAVE_TEMP3) - sysfs_remove_group(&dev->kobj, &lm90_temp3_group); - if (data->flags & LM90_HAVE_EMERGENCY_ALARM) - sysfs_remove_group(&dev->kobj, &lm90_emergency_alarm_group); - if (data->flags & LM90_HAVE_EMERGENCY) - sysfs_remove_group(&dev->kobj, &lm90_emergency_group); - if (data->flags & LM90_HAVE_OFFSET) - device_remove_file(dev, &sensor_dev_attr_temp2_offset.dev_attr); - device_remove_file(dev, &dev_attr_pec); - sysfs_remove_group(&dev->kobj, &lm90_group); -} - static void lm90_restore_conf(struct i2c_client *client, struct lm90_data *data) { /* Restore initial configuration */ @@ -1418,10 +1413,9 @@ static void lm90_restore_conf(struct i2c_client *client, struct lm90_data *data) data->config_orig); } -static void lm90_init_client(struct i2c_client *client) +static void lm90_init_client(struct i2c_client *client, struct lm90_data *data) { u8 config, convrate; - struct lm90_data *data = i2c_get_clientdata(client); if (lm90_read_reg(client, LM90_REG_R_CONVRATE, &convrate) < 0) { dev_warn(&client->dev, "Failed to read convrate register!\n"); @@ -1519,6 +1513,7 @@ static int lm90_probe(struct i2c_client *client, struct i2c_adapter *adapter = to_i2c_adapter(dev->parent); struct lm90_data *data; struct regulator *regulator; + int groups = 0; int err; regulator = devm_regulator_get(dev, "vcc"); @@ -1527,15 +1522,15 @@ static int lm90_probe(struct i2c_client *client, err = regulator_enable(regulator); if (err < 0) { - dev_err(&client->dev, - "Failed to enable regulator: %d\n", err); + dev_err(dev, "Failed to enable regulator: %d\n", err); return err; } - data = devm_kzalloc(&client->dev, sizeof(struct lm90_data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct lm90_data), GFP_KERNEL); if (!data) return -ENOMEM; + data->client = client; i2c_set_clientdata(client, data); mutex_init(&data->update_lock); @@ -1562,44 +1557,34 @@ static int lm90_probe(struct i2c_client *client, data->max_convrate = lm90_params[data->kind].max_convrate; /* Initialize the LM90 chip */ - lm90_init_client(client); + lm90_init_client(client, data); /* Register sysfs hooks */ - err = sysfs_create_group(&dev->kobj, &lm90_group); - if (err) - goto exit_restore; + data->groups[groups++] = &lm90_group; + + if (data->flags & LM90_HAVE_OFFSET) + data->groups[groups++] = &lm90_temp2_offset_group; + + if (data->flags & LM90_HAVE_EMERGENCY) + data->groups[groups++] = &lm90_emergency_group; + + if (data->flags & LM90_HAVE_EMERGENCY_ALARM) + data->groups[groups++] = &lm90_emergency_alarm_group; + + if (data->flags & LM90_HAVE_TEMP3) + data->groups[groups++] = &lm90_temp3_group; + if (client->flags & I2C_CLIENT_PEC) { err = device_create_file(dev, &dev_attr_pec); if (err) - goto exit_remove_files; - } - if (data->flags & LM90_HAVE_OFFSET) { - err = device_create_file(dev, - &sensor_dev_attr_temp2_offset.dev_attr); - if (err) - goto exit_remove_files; - } - if (data->flags & LM90_HAVE_EMERGENCY) { - err = sysfs_create_group(&dev->kobj, &lm90_emergency_group); - if (err) - goto exit_remove_files; - } - if (data->flags & LM90_HAVE_EMERGENCY_ALARM) { - err = sysfs_create_group(&dev->kobj, - &lm90_emergency_alarm_group); - if (err) - goto exit_remove_files; - } - if (data->flags & LM90_HAVE_TEMP3) { - err = sysfs_create_group(&dev->kobj, &lm90_temp3_group); - if (err) - goto exit_remove_files; + goto exit_restore; } - data->hwmon_dev = hwmon_device_register(dev); + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, data->groups); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; + goto exit_remove_pec; } if (client->irq) { @@ -1618,8 +1603,8 @@ static int lm90_probe(struct i2c_client *client, exit_unregister: hwmon_device_unregister(data->hwmon_dev); -exit_remove_files: - lm90_remove_files(client, data); +exit_remove_pec: + device_remove_file(dev, &dev_attr_pec); exit_restore: lm90_restore_conf(client, data); regulator_disable(data->regulator); @@ -1632,7 +1617,7 @@ static int lm90_remove(struct i2c_client *client) struct lm90_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); - lm90_remove_files(client, data); + device_remove_file(&client->dev, &dev_attr_pec); lm90_restore_conf(client, data); regulator_disable(data->regulator); diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 9d0e87a4f0c..b9022db6511 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -380,7 +380,6 @@ static int lm92_probe(struct i2c_client *new_client, return -ENOMEM; i2c_set_clientdata(new_client, data); - data->valid = 0; mutex_init(&data->update_lock); /* Initialize the chipset */ diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 6f1c6c0dbaf..adf23165a6a 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -2754,7 +2754,6 @@ static int lm93_probe(struct i2c_client *client, i2c_set_clientdata(client, data); /* housekeeping */ - data->valid = 0; data->update = update; mutex_init(&data->update_lock); diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 4b68fb2a31d..cdf19adaec7 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -89,7 +89,7 @@ static const u8 lm95241_reg_address[] = { /* Client data (each client gets its own) */ struct lm95241_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; unsigned long last_updated, interval; /* in jiffies */ char valid; /* zero until following fields are valid */ @@ -113,8 +113,8 @@ static int temp_from_reg_unsigned(u8 val_h, u8 val_l) static struct lm95241_data *lm95241_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; mutex_lock(&data->update_lock); @@ -122,7 +122,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) !data->valid) { int i; - dev_dbg(&client->dev, "Updating lm95241 data.\n"); + dev_dbg(dev, "Updating lm95241 data.\n"); for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++) data->temp[i] = i2c_smbus_read_byte_data(client, @@ -153,8 +153,7 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr, static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE - 1, data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n"); @@ -163,8 +162,8 @@ static ssize_t show_type(struct device *dev, struct device_attribute *attr, static ssize_t set_type(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int shift; u8 mask = to_sensor_dev_attr(attr)->index; @@ -201,8 +200,7 @@ static ssize_t set_type(struct device *dev, struct device_attribute *attr, static ssize_t show_min(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE - 1, data->config & to_sensor_dev_attr(attr)->index ? @@ -212,8 +210,7 @@ static ssize_t show_min(struct device *dev, struct device_attribute *attr, static ssize_t set_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); long val; if (kstrtol(buf, 10, &val) < 0) @@ -229,7 +226,8 @@ static ssize_t set_min(struct device *dev, struct device_attribute *attr, data->config &= ~to_sensor_dev_attr(attr)->index; data->valid = 0; - i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); + i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG, + data->config); mutex_unlock(&data->update_lock); @@ -239,8 +237,7 @@ static ssize_t set_min(struct device *dev, struct device_attribute *attr, static ssize_t show_max(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE - 1, data->config & to_sensor_dev_attr(attr)->index ? @@ -250,8 +247,7 @@ static ssize_t show_max(struct device *dev, struct device_attribute *attr, static ssize_t set_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); long val; if (kstrtol(buf, 10, &val) < 0) @@ -267,7 +263,8 @@ static ssize_t set_max(struct device *dev, struct device_attribute *attr, data->config &= ~to_sensor_dev_attr(attr)->index; data->valid = 0; - i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); + i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG, + data->config); mutex_unlock(&data->update_lock); @@ -286,8 +283,7 @@ static ssize_t show_interval(struct device *dev, struct device_attribute *attr, static ssize_t set_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95241_data *data = i2c_get_clientdata(client); + struct lm95241_data *data = dev_get_drvdata(dev); unsigned long val; if (kstrtoul(buf, 10, &val) < 0) @@ -316,7 +312,7 @@ static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, set_interval); -static struct attribute *lm95241_attributes[] = { +static struct attribute *lm95241_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, @@ -329,10 +325,7 @@ static struct attribute *lm95241_attributes[] = { &dev_attr_update_interval.attr, NULL }; - -static const struct attribute_group lm95241_group = { - .attrs = lm95241_attributes, -}; +ATTRIBUTE_GROUPS(lm95241); /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm95241_detect(struct i2c_client *new_client, @@ -366,14 +359,11 @@ static int lm95241_detect(struct i2c_client *new_client, return 0; } -static void lm95241_init_client(struct i2c_client *client) +static void lm95241_init_client(struct i2c_client *client, + struct lm95241_data *data) { - struct lm95241_data *data = i2c_get_clientdata(client); - data->interval = HZ; /* 1 sec default */ - data->valid = 0; data->config = CFG_CR0076; - data->model = 0; data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); @@ -385,49 +375,27 @@ static void lm95241_init_client(struct i2c_client *client) data->model); } -static int lm95241_probe(struct i2c_client *new_client, +static int lm95241_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct lm95241_data *data; - int err; + struct device *hwmon_dev; - data = devm_kzalloc(&new_client->dev, sizeof(struct lm95241_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct lm95241_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(new_client, data); + data->client = client; mutex_init(&data->update_lock); /* Initialize the LM95241 chip */ - lm95241_init_client(new_client); + lm95241_init_client(client, data); - /* Register sysfs hooks */ - err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group); - if (err) - return err; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &lm95241_group); - return err; -} - -static int lm95241_remove(struct i2c_client *client) -{ - struct lm95241_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm95241_group); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + lm95241_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } /* Driver data (common to all clients) */ @@ -444,7 +412,6 @@ static struct i2c_driver lm95241_driver = { .name = DEVNAME, }, .probe = lm95241_probe, - .remove = lm95241_remove, .id_table = lm95241_id, .detect = lm95241_detect, .address_list = normal_i2c, diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c index a6c85f0ff8f..0ae0dfdafdf 100644 --- a/drivers/hwmon/lm95245.c +++ b/drivers/hwmon/lm95245.c @@ -115,7 +115,7 @@ static const u8 lm95245_reg_address[] = { /* Client data (each client gets its own) */ struct lm95245_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; unsigned long last_updated; /* in jiffies */ unsigned long interval; /* in msecs */ @@ -140,8 +140,8 @@ static int temp_from_reg_signed(u8 val_h, u8 val_l) static struct lm95245_data *lm95245_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; mutex_lock(&data->update_lock); @@ -149,7 +149,6 @@ static struct lm95245_data *lm95245_update_device(struct device *dev) + msecs_to_jiffies(data->interval)) || !data->valid) { int i; - dev_dbg(&client->dev, "Updating lm95245 data.\n"); for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) data->regs[i] = i2c_smbus_read_byte_data(client, @@ -249,9 +248,9 @@ static ssize_t show_limit(struct device *dev, struct device_attribute *attr, static ssize_t set_limit(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); int index = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = data->client; unsigned long val; if (kstrtoul(buf, 10, &val) < 0) @@ -272,27 +271,38 @@ static ssize_t set_limit(struct device *dev, struct device_attribute *attr, return count; } +static ssize_t show_crit_hyst(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm95245_data *data = lm95245_update_device(dev); + int index = to_sensor_dev_attr(attr)->index; + int hyst = data->regs[index] - data->regs[8]; + + return snprintf(buf, PAGE_SIZE - 1, "%d\n", hyst * 1000); +} + static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); + int index = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = data->client; unsigned long val; + int hyst, limit; if (kstrtoul(buf, 10, &val) < 0) return -EINVAL; - val /= 1000; - - val = clamp_val(val, 0, 31); - mutex_lock(&data->update_lock); - data->valid = 0; + limit = i2c_smbus_read_byte_data(client, lm95245_reg_address[index]); + hyst = limit - val / 1000; + hyst = clamp_val(hyst, 0, 31); + data->regs[8] = hyst; /* shared crit hysteresis */ i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, - val); + hyst); mutex_unlock(&data->update_lock); @@ -302,8 +312,7 @@ static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE - 1, data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); @@ -312,8 +321,8 @@ static ssize_t show_type(struct device *dev, struct device_attribute *attr, static ssize_t set_type(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; if (kstrtoul(buf, 10, &val) < 0) @@ -359,8 +368,8 @@ static ssize_t show_interval(struct device *dev, struct device_attribute *attr, static ssize_t set_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct lm95245_data *data = i2c_get_clientdata(client); + struct lm95245_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; if (kstrtoul(buf, 10, &val) < 0) @@ -378,16 +387,15 @@ static ssize_t set_interval(struct device *dev, struct device_attribute *attr, static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, set_limit, 6); -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit, - set_crit_hyst, 8); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_crit_hyst, + set_crit_hyst, 6); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, STATUS1_LOC); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, set_limit, 7); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit, - set_crit_hyst, 8); +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_crit_hyst, NULL, 7); static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, STATUS1_RTCRIT); static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, @@ -398,7 +406,7 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, set_interval); -static struct attribute *lm95245_attributes[] = { +static struct attribute *lm95245_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, @@ -412,10 +420,7 @@ static struct attribute *lm95245_attributes[] = { &dev_attr_update_interval.attr, NULL }; - -static const struct attribute_group lm95245_group = { - .attrs = lm95245_attributes, -}; +ATTRIBUTE_GROUPS(lm95245); /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm95245_detect(struct i2c_client *new_client, @@ -436,11 +441,9 @@ static int lm95245_detect(struct i2c_client *new_client, return 0; } -static void lm95245_init_client(struct i2c_client *client) +static void lm95245_init_client(struct i2c_client *client, + struct lm95245_data *data) { - struct lm95245_data *data = i2c_get_clientdata(client); - - data->valid = 0; data->interval = lm95245_read_conversion_rate(client); data->config1 = i2c_smbus_read_byte_data(client, @@ -456,49 +459,27 @@ static void lm95245_init_client(struct i2c_client *client) } } -static int lm95245_probe(struct i2c_client *new_client, +static int lm95245_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct lm95245_data *data; - int err; + struct device *hwmon_dev; - data = devm_kzalloc(&new_client->dev, sizeof(struct lm95245_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct lm95245_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(new_client, data); + data->client = client; mutex_init(&data->update_lock); /* Initialize the LM95245 chip */ - lm95245_init_client(new_client); - - /* Register sysfs hooks */ - err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group); - if (err) - return err; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &lm95245_group); - return err; -} + lm95245_init_client(client, data); -static int lm95245_remove(struct i2c_client *client) -{ - struct lm95245_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm95245_group); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + lm95245_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } /* Driver data (common to all clients) */ @@ -514,7 +495,6 @@ static struct i2c_driver lm95245_driver = { .name = DEVNAME, }, .probe = lm95245_probe, - .remove = lm95245_remove, .id_table = lm95245_id, .detect = lm95245_detect, .address_list = normal_i2c, diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c new file mode 100644 index 00000000000..c104cc32989 --- /dev/null +++ b/drivers/hwmon/ltc2945.c @@ -0,0 +1,519 @@ +/* + * Driver for Linear Technology LTC2945 I2C Power Monitor + * + * Copyright (c) 2014 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/regmap.h> + +/* chip registers */ +#define LTC2945_CONTROL 0x00 +#define LTC2945_ALERT 0x01 +#define LTC2945_STATUS 0x02 +#define LTC2945_FAULT 0x03 +#define LTC2945_POWER_H 0x05 +#define LTC2945_MAX_POWER_H 0x08 +#define LTC2945_MIN_POWER_H 0x0b +#define LTC2945_MAX_POWER_THRES_H 0x0e +#define LTC2945_MIN_POWER_THRES_H 0x11 +#define LTC2945_SENSE_H 0x14 +#define LTC2945_MAX_SENSE_H 0x16 +#define LTC2945_MIN_SENSE_H 0x18 +#define LTC2945_MAX_SENSE_THRES_H 0x1a +#define LTC2945_MIN_SENSE_THRES_H 0x1c +#define LTC2945_VIN_H 0x1e +#define LTC2945_MAX_VIN_H 0x20 +#define LTC2945_MIN_VIN_H 0x22 +#define LTC2945_MAX_VIN_THRES_H 0x24 +#define LTC2945_MIN_VIN_THRES_H 0x26 +#define LTC2945_ADIN_H 0x28 +#define LTC2945_MAX_ADIN_H 0x2a +#define LTC2945_MIN_ADIN_H 0x2c +#define LTC2945_MAX_ADIN_THRES_H 0x2e +#define LTC2945_MIN_ADIN_THRES_H 0x30 +#define LTC2945_MIN_ADIN_THRES_L 0x31 + +/* Fault register bits */ + +#define FAULT_ADIN_UV (1 << 0) +#define FAULT_ADIN_OV (1 << 1) +#define FAULT_VIN_UV (1 << 2) +#define FAULT_VIN_OV (1 << 3) +#define FAULT_SENSE_UV (1 << 4) +#define FAULT_SENSE_OV (1 << 5) +#define FAULT_POWER_UV (1 << 6) +#define FAULT_POWER_OV (1 << 7) + +/* Control register bits */ + +#define CONTROL_MULT_SELECT (1 << 0) +#define CONTROL_TEST_MODE (1 << 4) + +static inline bool is_power_reg(u8 reg) +{ + return reg < LTC2945_SENSE_H; +} + +/* Return the value from the given register in uW, mV, or mA */ +static long long ltc2945_reg_to_val(struct device *dev, u8 reg) +{ + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int control; + u8 buf[3]; + long long val; + int ret; + + ret = regmap_bulk_read(regmap, reg, buf, + is_power_reg(reg) ? 3 : 2); + if (ret < 0) + return ret; + + if (is_power_reg(reg)) { + /* power */ + val = (buf[0] << 16) + (buf[1] << 8) + buf[2]; + } else { + /* current, voltage */ + val = (buf[0] << 4) + (buf[1] >> 4); + } + + switch (reg) { + case LTC2945_POWER_H: + case LTC2945_MAX_POWER_H: + case LTC2945_MIN_POWER_H: + case LTC2945_MAX_POWER_THRES_H: + case LTC2945_MIN_POWER_THRES_H: + /* + * Convert to uW by assuming current is measured with + * an 1mOhm sense resistor, similar to current + * measurements. + * Control register bit 0 selects if voltage at SENSE+/VDD + * or voltage at ADIN is used to measure power. + */ + ret = regmap_read(regmap, LTC2945_CONTROL, &control); + if (ret < 0) + return ret; + if (control & CONTROL_MULT_SELECT) { + /* 25 mV * 25 uV = 0.625 uV resolution. */ + val *= 625LL; + } else { + /* 0.5 mV * 25 uV = 0.0125 uV resolution. */ + val = (val * 25LL) >> 1; + } + break; + case LTC2945_VIN_H: + case LTC2945_MAX_VIN_H: + case LTC2945_MIN_VIN_H: + case LTC2945_MAX_VIN_THRES_H: + case LTC2945_MIN_VIN_THRES_H: + /* 25 mV resolution. Convert to mV. */ + val *= 25; + break; + case LTC2945_ADIN_H: + case LTC2945_MAX_ADIN_H: + case LTC2945_MIN_ADIN_THRES_H: + case LTC2945_MAX_ADIN_THRES_H: + case LTC2945_MIN_ADIN_H: + /* 0.5mV resolution. Convert to mV. */ + val = val >> 1; + break; + case LTC2945_SENSE_H: + case LTC2945_MAX_SENSE_H: + case LTC2945_MIN_SENSE_H: + case LTC2945_MAX_SENSE_THRES_H: + case LTC2945_MIN_SENSE_THRES_H: + /* + * 25 uV resolution. Convert to current as measured with + * an 1 mOhm sense resistor, in mA. If a different sense + * resistor is installed, calculate the actual current by + * dividing the reported current by the sense resistor value + * in mOhm. + */ + val *= 25; + break; + default: + return -EINVAL; + } + return val; +} + +static int ltc2945_val_to_reg(struct device *dev, u8 reg, + unsigned long val) +{ + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int control; + int ret; + + switch (reg) { + case LTC2945_POWER_H: + case LTC2945_MAX_POWER_H: + case LTC2945_MIN_POWER_H: + case LTC2945_MAX_POWER_THRES_H: + case LTC2945_MIN_POWER_THRES_H: + /* + * Convert to register value by assuming current is measured + * with an 1mOhm sense resistor, similar to current + * measurements. + * Control register bit 0 selects if voltage at SENSE+/VDD + * or voltage at ADIN is used to measure power, which in turn + * determines register calculations. + */ + ret = regmap_read(regmap, LTC2945_CONTROL, &control); + if (ret < 0) + return ret; + if (control & CONTROL_MULT_SELECT) { + /* 25 mV * 25 uV = 0.625 uV resolution. */ + val = DIV_ROUND_CLOSEST(val, 625); + } else { + /* + * 0.5 mV * 25 uV = 0.0125 uV resolution. + * Divide first to avoid overflow; + * accept loss of accuracy. + */ + val = DIV_ROUND_CLOSEST(val, 25) * 2; + } + break; + case LTC2945_VIN_H: + case LTC2945_MAX_VIN_H: + case LTC2945_MIN_VIN_H: + case LTC2945_MAX_VIN_THRES_H: + case LTC2945_MIN_VIN_THRES_H: + /* 25 mV resolution. */ + val /= 25; + break; + case LTC2945_ADIN_H: + case LTC2945_MAX_ADIN_H: + case LTC2945_MIN_ADIN_THRES_H: + case LTC2945_MAX_ADIN_THRES_H: + case LTC2945_MIN_ADIN_H: + /* 0.5mV resolution. */ + val *= 2; + break; + case LTC2945_SENSE_H: + case LTC2945_MAX_SENSE_H: + case LTC2945_MIN_SENSE_H: + case LTC2945_MAX_SENSE_THRES_H: + case LTC2945_MIN_SENSE_THRES_H: + /* + * 25 uV resolution. Convert to current as measured with + * an 1 mOhm sense resistor, in mA. If a different sense + * resistor is installed, calculate the actual current by + * dividing the reported current by the sense resistor value + * in mOhm. + */ + val = DIV_ROUND_CLOSEST(val, 25); + break; + default: + return -EINVAL; + } + return val; +} + +static ssize_t ltc2945_show_value(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + long long value; + + value = ltc2945_reg_to_val(dev, attr->index); + if (value < 0) + return value; + return snprintf(buf, PAGE_SIZE, "%lld\n", value); +} + +static ssize_t ltc2945_set_value(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct regmap *regmap = dev_get_drvdata(dev); + u8 reg = attr->index; + unsigned long val; + u8 regbuf[3]; + int num_regs; + int regval; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + /* convert to register value, then clamp and write result */ + regval = ltc2945_val_to_reg(dev, reg, val); + if (is_power_reg(reg)) { + regval = clamp_val(regval, 0, 0xffffff); + regbuf[0] = regval >> 16; + regbuf[1] = (regval >> 8) & 0xff; + regbuf[2] = regval; + num_regs = 3; + } else { + regval = clamp_val(regval, 0, 0xfff) << 4; + regbuf[0] = regval >> 8; + regbuf[1] = regval & 0xff; + num_regs = 2; + } + ret = regmap_bulk_write(regmap, reg, regbuf, num_regs); + return ret < 0 ? ret : count; +} + +static ssize_t ltc2945_reset_history(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct regmap *regmap = dev_get_drvdata(dev); + u8 reg = attr->index; + int num_regs = is_power_reg(reg) ? 3 : 2; + u8 buf_min[3] = { 0xff, 0xff, 0xff }; + u8 buf_max[3] = { 0, 0, 0 }; + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + if (val != 1) + return -EINVAL; + + ret = regmap_update_bits(regmap, LTC2945_CONTROL, CONTROL_TEST_MODE, + CONTROL_TEST_MODE); + + /* Reset minimum */ + ret = regmap_bulk_write(regmap, reg, buf_min, num_regs); + if (ret) + return ret; + + switch (reg) { + case LTC2945_MIN_POWER_H: + reg = LTC2945_MAX_POWER_H; + break; + case LTC2945_MIN_SENSE_H: + reg = LTC2945_MAX_SENSE_H; + break; + case LTC2945_MIN_VIN_H: + reg = LTC2945_MAX_VIN_H; + break; + case LTC2945_MIN_ADIN_H: + reg = LTC2945_MAX_ADIN_H; + break; + default: + BUG(); + break; + } + /* Reset maximum */ + ret = regmap_bulk_write(regmap, reg, buf_max, num_regs); + + /* Try resetting test mode even if there was an error */ + regmap_update_bits(regmap, LTC2945_CONTROL, CONTROL_TEST_MODE, 0); + + return ret ? : count; +} + +static ssize_t ltc2945_show_bool(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int fault; + int ret; + + ret = regmap_read(regmap, LTC2945_FAULT, &fault); + if (ret < 0) + return ret; + + fault &= attr->index; + if (fault) /* Clear reported faults in chip register */ + regmap_update_bits(regmap, LTC2945_FAULT, attr->index, 0); + + return snprintf(buf, PAGE_SIZE, "%d\n", !!fault); +} + +/* Input voltages */ + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_VIN_H); +static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MIN_VIN_THRES_H); +static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MAX_VIN_THRES_H); +static SENSOR_DEVICE_ATTR(in1_lowest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MIN_VIN_H); +static SENSOR_DEVICE_ATTR(in1_highest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MAX_VIN_H); +static SENSOR_DEVICE_ATTR(in1_reset_history, S_IWUSR, NULL, + ltc2945_reset_history, LTC2945_MIN_VIN_H); + +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_ADIN_H); +static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MIN_ADIN_THRES_H); +static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MAX_ADIN_THRES_H); +static SENSOR_DEVICE_ATTR(in2_lowest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MIN_ADIN_H); +static SENSOR_DEVICE_ATTR(in2_highest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MAX_ADIN_H); +static SENSOR_DEVICE_ATTR(in2_reset_history, S_IWUSR, NULL, + ltc2945_reset_history, LTC2945_MIN_ADIN_H); + +/* Voltage alarms */ + +static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_VIN_UV); +static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_VIN_OV); +static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_ADIN_UV); +static SENSOR_DEVICE_ATTR(in2_max_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_ADIN_OV); + +/* Currents (via sense resistor) */ + +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_SENSE_H); +static SENSOR_DEVICE_ATTR(curr1_min, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MIN_SENSE_THRES_H); +static SENSOR_DEVICE_ATTR(curr1_max, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MAX_SENSE_THRES_H); +static SENSOR_DEVICE_ATTR(curr1_lowest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MIN_SENSE_H); +static SENSOR_DEVICE_ATTR(curr1_highest, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_MAX_SENSE_H); +static SENSOR_DEVICE_ATTR(curr1_reset_history, S_IWUSR, NULL, + ltc2945_reset_history, LTC2945_MIN_SENSE_H); + +/* Current alarms */ + +static SENSOR_DEVICE_ATTR(curr1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_SENSE_UV); +static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_SENSE_OV); + +/* Power */ + +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ltc2945_show_value, NULL, + LTC2945_POWER_H); +static SENSOR_DEVICE_ATTR(power1_min, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MIN_POWER_THRES_H); +static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO | S_IWUSR, ltc2945_show_value, + ltc2945_set_value, LTC2945_MAX_POWER_THRES_H); +static SENSOR_DEVICE_ATTR(power1_input_lowest, S_IRUGO, ltc2945_show_value, + NULL, LTC2945_MIN_POWER_H); +static SENSOR_DEVICE_ATTR(power1_input_highest, S_IRUGO, ltc2945_show_value, + NULL, LTC2945_MAX_POWER_H); +static SENSOR_DEVICE_ATTR(power1_reset_history, S_IWUSR, NULL, + ltc2945_reset_history, LTC2945_MIN_POWER_H); + +/* Power alarms */ + +static SENSOR_DEVICE_ATTR(power1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_POWER_UV); +static SENSOR_DEVICE_ATTR(power1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL, + FAULT_POWER_OV); + +static struct attribute *ltc2945_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_lowest.dev_attr.attr, + &sensor_dev_attr_in1_highest.dev_attr.attr, + &sensor_dev_attr_in1_reset_history.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_lowest.dev_attr.attr, + &sensor_dev_attr_in2_highest.dev_attr.attr, + &sensor_dev_attr_in2_reset_history.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + &sensor_dev_attr_in2_max_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_min.dev_attr.attr, + &sensor_dev_attr_curr1_max.dev_attr.attr, + &sensor_dev_attr_curr1_lowest.dev_attr.attr, + &sensor_dev_attr_curr1_highest.dev_attr.attr, + &sensor_dev_attr_curr1_reset_history.dev_attr.attr, + &sensor_dev_attr_curr1_min_alarm.dev_attr.attr, + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_power1_min.dev_attr.attr, + &sensor_dev_attr_power1_max.dev_attr.attr, + &sensor_dev_attr_power1_input_lowest.dev_attr.attr, + &sensor_dev_attr_power1_input_highest.dev_attr.attr, + &sensor_dev_attr_power1_reset_history.dev_attr.attr, + &sensor_dev_attr_power1_min_alarm.dev_attr.attr, + &sensor_dev_attr_power1_max_alarm.dev_attr.attr, + + NULL, +}; +ATTRIBUTE_GROUPS(ltc2945); + +static struct regmap_config ltc2945_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LTC2945_MIN_ADIN_THRES_L, +}; + +static int ltc2945_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, <c2945_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + /* Clear faults */ + regmap_write(regmap, LTC2945_FAULT, 0x00); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + regmap, + ltc2945_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id ltc2945_id[] = { + {"ltc2945", 0}, + { } +}; + +MODULE_DEVICE_TABLE(i2c, ltc2945_id); + +static struct i2c_driver ltc2945_driver = { + .driver = { + .name = "ltc2945", + }, + .probe = ltc2945_probe, + .id_table = ltc2945_id, +}; + +module_i2c_driver(ltc2945_driver); + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("LTC2945 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c index 8a142960d69..c8a9bd9b050 100644 --- a/drivers/hwmon/ltc4215.c +++ b/drivers/hwmon/ltc4215.c @@ -33,7 +33,7 @@ enum ltc4215_cmd { }; struct ltc4215_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; bool valid; @@ -45,8 +45,8 @@ struct ltc4215_data { static struct ltc4215_data *ltc4215_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct ltc4215_data *data = i2c_get_clientdata(client); + struct ltc4215_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; s32 val; int i; @@ -214,7 +214,7 @@ static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc4215_show_alarm, NULL, * Finally, construct an array of pointers to members of the above objects, * as required for sysfs_create_group() */ -static struct attribute *ltc4215_attributes[] = { +static struct attribute *ltc4215_attrs[] = { &sensor_dev_attr_curr1_input.dev_attr.attr, &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, @@ -229,57 +229,33 @@ static struct attribute *ltc4215_attributes[] = { NULL, }; - -static const struct attribute_group ltc4215_group = { - .attrs = ltc4215_attributes, -}; +ATTRIBUTE_GROUPS(ltc4215); static int ltc4215_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; struct ltc4215_data *data; - int ret; + struct device *hwmon_dev; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); + data->client = client; mutex_init(&data->update_lock); /* Initialize the LTC4215 chip */ i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); - /* Register sysfs hooks */ - ret = sysfs_create_group(&client->dev.kobj, <c4215_group); - if (ret) - return ret; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - ret = PTR_ERR(data->hwmon_dev); - goto out_hwmon_device_register; - } - - return 0; - -out_hwmon_device_register: - sysfs_remove_group(&client->dev.kobj, <c4215_group); - return ret; -} - -static int ltc4215_remove(struct i2c_client *client) -{ - struct ltc4215_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, <c4215_group); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + ltc4215_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } static const struct i2c_device_id ltc4215_id[] = { @@ -294,7 +270,6 @@ static struct i2c_driver ltc4215_driver = { .name = "ltc4215", }, .probe = ltc4215_probe, - .remove = ltc4215_remove, .id_table = ltc4215_id, }; diff --git a/drivers/hwmon/ltc4222.c b/drivers/hwmon/ltc4222.c new file mode 100644 index 00000000000..07c25653659 --- /dev/null +++ b/drivers/hwmon/ltc4222.c @@ -0,0 +1,237 @@ +/* + * Driver for Linear Technology LTC4222 Dual Hot Swap controller + * + * Copyright (c) 2014 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/regmap.h> + +/* chip registers */ + +#define LTC4222_CONTROL1 0xd0 +#define LTC4222_ALERT1 0xd1 +#define LTC4222_STATUS1 0xd2 +#define LTC4222_FAULT1 0xd3 +#define LTC4222_CONTROL2 0xd4 +#define LTC4222_ALERT2 0xd5 +#define LTC4222_STATUS2 0xd6 +#define LTC4222_FAULT2 0xd7 +#define LTC4222_SOURCE1 0xd8 +#define LTC4222_SOURCE2 0xda +#define LTC4222_ADIN1 0xdc +#define LTC4222_ADIN2 0xde +#define LTC4222_SENSE1 0xe0 +#define LTC4222_SENSE2 0xe2 +#define LTC4222_ADC_CONTROL 0xe4 + +/* + * Fault register bits + */ +#define FAULT_OV BIT(0) +#define FAULT_UV BIT(1) +#define FAULT_OC BIT(2) +#define FAULT_POWER_BAD BIT(3) +#define FAULT_FET_BAD BIT(5) + +/* Return the voltage from the given register in mV or mA */ +static int ltc4222_get_value(struct device *dev, u8 reg) +{ + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int val; + u8 buf[2]; + int ret; + + ret = regmap_bulk_read(regmap, reg, buf, 2); + if (ret < 0) + return ret; + + val = ((buf[0] << 8) + buf[1]) >> 6; + + switch (reg) { + case LTC4222_ADIN1: + case LTC4222_ADIN2: + /* 1.25 mV resolution. Convert to mV. */ + val = DIV_ROUND_CLOSEST(val * 5, 4); + break; + case LTC4222_SOURCE1: + case LTC4222_SOURCE2: + /* 31.25 mV resolution. Convert to mV. */ + val = DIV_ROUND_CLOSEST(val * 125, 4); + break; + case LTC4222_SENSE1: + case LTC4222_SENSE2: + /* + * 62.5 uV resolution. Convert to current as measured with + * an 1 mOhm sense resistor, in mA. If a different sense + * resistor is installed, calculate the actual current by + * dividing the reported current by the sense resistor value + * in mOhm. + */ + val = DIV_ROUND_CLOSEST(val * 125, 2); + break; + default: + return -EINVAL; + } + return val; +} + +static ssize_t ltc4222_show_value(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + int value; + + value = ltc4222_get_value(dev, attr->index); + if (value < 0) + return value; + return snprintf(buf, PAGE_SIZE, "%d\n", value); +} + +static ssize_t ltc4222_show_bool(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int fault; + int ret; + + ret = regmap_read(regmap, attr->nr, &fault); + if (ret < 0) + return ret; + fault &= attr->index; + if (fault) /* Clear reported faults in chip register */ + regmap_update_bits(regmap, attr->nr, attr->index, 0); + + return snprintf(buf, PAGE_SIZE, "%d\n", !!fault); +} + +/* Voltages */ +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_SOURCE1); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_ADIN1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_SOURCE2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_ADIN2); + +/* + * Voltage alarms + * UV/OV faults are associated with the input voltage, and power bad and fet + * faults are associated with the output voltage. + */ +static SENSOR_DEVICE_ATTR_2(in1_min_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT1, FAULT_UV); +static SENSOR_DEVICE_ATTR_2(in1_max_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT1, FAULT_OV); +static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT1, FAULT_POWER_BAD | FAULT_FET_BAD); + +static SENSOR_DEVICE_ATTR_2(in3_min_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT2, FAULT_UV); +static SENSOR_DEVICE_ATTR_2(in3_max_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT2, FAULT_OV); +static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT2, FAULT_POWER_BAD | FAULT_FET_BAD); + +/* Current (via sense resistor) */ +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_SENSE1); +static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc4222_show_value, NULL, + LTC4222_SENSE2); + +/* Overcurrent alarm */ +static SENSOR_DEVICE_ATTR_2(curr1_max_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT1, FAULT_OC); +static SENSOR_DEVICE_ATTR_2(curr2_max_alarm, S_IRUGO, ltc4222_show_bool, NULL, + LTC4222_FAULT2, FAULT_OC); + +static struct attribute *ltc4222_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min_alarm.dev_attr.attr, + &sensor_dev_attr_in3_max_alarm.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr2_input.dev_attr.attr, + &sensor_dev_attr_curr2_max_alarm.dev_attr.attr, + + NULL, +}; +ATTRIBUTE_GROUPS(ltc4222); + +static struct regmap_config ltc4222_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LTC4222_ADC_CONTROL, +}; + +static int ltc4222_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, <c4222_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + /* Clear faults */ + regmap_write(regmap, LTC4222_FAULT1, 0x00); + regmap_write(regmap, LTC4222_FAULT2, 0x00); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + regmap, + ltc4222_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id ltc4222_id[] = { + {"ltc4222", 0}, + { } +}; + +MODULE_DEVICE_TABLE(i2c, ltc4222_id); + +static struct i2c_driver ltc4222_driver = { + .driver = { + .name = "ltc4222", + }, + .probe = ltc4222_probe, + .id_table = ltc4222_id, +}; + +module_i2c_driver(ltc4222_driver); + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("LTC4222 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index d4172933ce4..681b5b7b3c3 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -95,7 +95,6 @@ static void ltc4245_update_gpios(struct device *dev) * readings as stale by setting them to -EAGAIN */ if (time_after(jiffies, data->last_updated + 5 * HZ)) { - dev_dbg(&client->dev, "Marking GPIOs invalid\n"); for (i = 0; i < ARRAY_SIZE(data->gpios); i++) data->gpios[i] = -EAGAIN; } @@ -141,8 +140,6 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - dev_dbg(&client->dev, "Starting ltc4245 update\n"); - /* Read control registers -- 0x00 to 0x07 */ for (i = 0; i < ARRAY_SIZE(data->cregs); i++) { val = i2c_smbus_read_byte_data(client, i); @@ -470,19 +467,15 @@ static void ltc4245_sysfs_add_groups(struct ltc4245_data *data) static bool ltc4245_use_extra_gpios(struct i2c_client *client) { struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev); -#ifdef CONFIG_OF struct device_node *np = client->dev.of_node; -#endif /* prefer platform data */ if (pdata) return pdata->use_extra_gpios; -#ifdef CONFIG_OF /* fallback on OF */ if (of_find_property(np, "ltc4245,use-extra-gpios", NULL)) return true; -#endif return false; } @@ -512,24 +505,10 @@ static int ltc4245_probe(struct i2c_client *client, /* Add sysfs hooks */ ltc4245_sysfs_add_groups(data); - hwmon_dev = hwmon_device_register_with_groups(&client->dev, - client->name, data, - data->groups); - if (IS_ERR(hwmon_dev)) - return PTR_ERR(hwmon_dev); - - i2c_set_clientdata(client, hwmon_dev); - - return 0; -} - -static int ltc4245_remove(struct i2c_client *client) -{ - struct device *hwmon_dev = i2c_get_clientdata(client); - - hwmon_device_unregister(hwmon_dev); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, + client->name, data, + data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } static const struct i2c_device_id ltc4245_id[] = { @@ -544,7 +523,6 @@ static struct i2c_driver ltc4245_driver = { .name = "ltc4245", }, .probe = ltc4245_probe, - .remove = ltc4245_remove, .id_table = ltc4245_id, }; diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c new file mode 100644 index 00000000000..453a250d9df --- /dev/null +++ b/drivers/hwmon/ltc4260.c @@ -0,0 +1,200 @@ +/* + * Driver for Linear Technology LTC4260 I2C Positive Voltage Hot Swap Controller + * + * Copyright (c) 2014 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/regmap.h> + +/* chip registers */ +#define LTC4260_CONTROL 0x00 +#define LTC4260_ALERT 0x01 +#define LTC4260_STATUS 0x02 +#define LTC4260_FAULT 0x03 +#define LTC4260_SENSE 0x04 +#define LTC4260_SOURCE 0x05 +#define LTC4260_ADIN 0x06 + +/* + * Fault register bits + */ +#define FAULT_OV (1 << 0) +#define FAULT_UV (1 << 1) +#define FAULT_OC (1 << 2) +#define FAULT_POWER_BAD (1 << 3) +#define FAULT_FET_SHORT (1 << 5) + +/* Return the voltage from the given register in mV or mA */ +static int ltc4260_get_value(struct device *dev, u8 reg) +{ + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = regmap_read(regmap, reg, &val); + if (ret < 0) + return ret; + + switch (reg) { + case LTC4260_ADIN: + /* 10 mV resolution. Convert to mV. */ + val = val * 10; + break; + case LTC4260_SOURCE: + /* 400 mV resolution. Convert to mV. */ + val = val * 400; + break; + case LTC4260_SENSE: + /* + * 300 uV resolution. Convert to current as measured with + * an 1 mOhm sense resistor, in mA. If a different sense + * resistor is installed, calculate the actual current by + * dividing the reported current by the sense resistor value + * in mOhm. + */ + val = val * 300; + break; + default: + return -EINVAL; + } + + return val; +} + +static ssize_t ltc4260_show_value(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + int value; + + value = ltc4260_get_value(dev, attr->index); + if (value < 0) + return value; + return snprintf(buf, PAGE_SIZE, "%d\n", value); +} + +static ssize_t ltc4260_show_bool(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int fault; + int ret; + + ret = regmap_read(regmap, LTC4260_FAULT, &fault); + if (ret < 0) + return ret; + + fault &= attr->index; + if (fault) /* Clear reported faults in chip register */ + regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0); + + return snprintf(buf, PAGE_SIZE, "%d\n", !!fault); +} + +/* Voltages */ +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4260_show_value, NULL, + LTC4260_SOURCE); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4260_show_value, NULL, + LTC4260_ADIN); + +/* + * Voltage alarms + * UV/OV faults are associated with the input voltage, and the POWER BAD and + * FET SHORT faults are associated with the output voltage. + */ +static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4260_show_bool, NULL, + FAULT_UV); +static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL, + FAULT_OV); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, ltc4260_show_bool, NULL, + FAULT_POWER_BAD | FAULT_FET_SHORT); + +/* Current (via sense resistor) */ +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4260_show_value, NULL, + LTC4260_SENSE); + +/* Overcurrent alarm */ +static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL, + FAULT_OC); + +static struct attribute *ltc4260_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + + NULL, +}; +ATTRIBUTE_GROUPS(ltc4260); + +static struct regmap_config ltc4260_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LTC4260_ADIN, +}; + +static int ltc4260_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, <c4260_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + /* Clear faults */ + regmap_write(regmap, LTC4260_FAULT, 0x00); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + regmap, + ltc4260_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id ltc4260_id[] = { + {"ltc4260", 0}, + { } +}; + +MODULE_DEVICE_TABLE(i2c, ltc4260_id); + +static struct i2c_driver ltc4260_driver = { + .driver = { + .name = "ltc4260", + }, + .probe = ltc4260_probe, + .id_table = ltc4260_id, +}; + +module_i2c_driver(ltc4260_driver); + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("LTC4260 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 6638e997f83..4c23afe113e 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -273,7 +273,6 @@ static int max1619_probe(struct i2c_client *new_client, return -ENOMEM; i2c_set_clientdata(new_client, data); - data->valid = 0; mutex_init(&data->update_lock); /* Initialize the MAX1619 chip */ diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c index 029b65e6c58..e3ed0a5b6d9 100644 --- a/drivers/hwmon/max1668.c +++ b/drivers/hwmon/max1668.c @@ -66,7 +66,8 @@ MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); enum chips { max1668, max1805, max1989 }; struct max1668_data { - struct device *hwmon_dev; + struct i2c_client *client; + const struct attribute_group *groups[3]; enum chips type; struct mutex update_lock; @@ -82,8 +83,8 @@ struct max1668_data { static struct max1668_data *max1668_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct max1668_data *data = i2c_get_clientdata(client); + struct max1668_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; struct max1668_data *ret = data; s32 val; int i; @@ -205,8 +206,8 @@ static ssize_t set_temp_max(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct max1668_data *data = i2c_get_clientdata(client); + struct max1668_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long temp; int ret; @@ -216,10 +217,11 @@ static ssize_t set_temp_max(struct device *dev, mutex_lock(&data->update_lock); data->temp_max[index] = clamp_val(temp/1000, -128, 127); - if (i2c_smbus_write_byte_data(client, + ret = i2c_smbus_write_byte_data(client, MAX1668_REG_LIMH_WR(index), - data->temp_max[index])) - count = -EIO; + data->temp_max[index]); + if (ret < 0) + count = ret; mutex_unlock(&data->update_lock); return count; @@ -230,8 +232,8 @@ static ssize_t set_temp_min(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct max1668_data *data = i2c_get_clientdata(client); + struct max1668_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; long temp; int ret; @@ -241,10 +243,11 @@ static ssize_t set_temp_min(struct device *dev, mutex_lock(&data->update_lock); data->temp_min[index] = clamp_val(temp/1000, -128, 127); - if (i2c_smbus_write_byte_data(client, + ret = i2c_smbus_write_byte_data(client, MAX1668_REG_LIML_WR(index), - data->temp_min[index])) - count = -EIO; + data->temp_min[index]); + if (ret < 0) + count = ret; mutex_unlock(&data->update_lock); return count; @@ -405,60 +408,29 @@ static int max1668_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + struct device *hwmon_dev; struct max1668_data *data; - int err; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - data = devm_kzalloc(&client->dev, sizeof(struct max1668_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct max1668_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); + data->client = client; data->type = id->driver_data; mutex_init(&data->update_lock); - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &max1668_group_common); - if (err) - return err; - - if (data->type == max1668 || data->type == max1989) { - err = sysfs_create_group(&client->dev.kobj, - &max1668_group_unique); - if (err) - goto error_sysrem0; - } - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto error_sysrem1; - } - - return 0; - -error_sysrem1: + /* sysfs hooks */ + data->groups[0] = &max1668_group_common; if (data->type == max1668 || data->type == max1989) - sysfs_remove_group(&client->dev.kobj, &max1668_group_unique); -error_sysrem0: - sysfs_remove_group(&client->dev.kobj, &max1668_group_common); - return err; -} - -static int max1668_remove(struct i2c_client *client) -{ - struct max1668_data *data = i2c_get_clientdata(client); + data->groups[1] = &max1668_group_unique; - hwmon_device_unregister(data->hwmon_dev); - if (data->type == max1668 || data->type == max1989) - sysfs_remove_group(&client->dev.kobj, &max1668_group_unique); - - sysfs_remove_group(&client->dev.kobj, &max1668_group_common); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } static const struct i2c_device_id max1668_id[] = { @@ -476,7 +448,6 @@ static struct i2c_driver max1668_driver = { .name = "max1668", }, .probe = max1668_probe, - .remove = max1668_remove, .id_table = max1668_id, .detect = max1668_detect, .address_list = max1668_addr_list, diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index 066e587a18a..70650de2cbd 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -80,7 +80,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; * Client data (each client gets its own) */ struct max6639_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -104,8 +104,8 @@ struct max6639_data { static struct max6639_data *max6639_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); + struct max6639_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; struct max6639_data *ret = data; int i; int status_reg; @@ -191,9 +191,8 @@ static ssize_t show_temp_fault(struct device *dev, static ssize_t show_temp_max(struct device *dev, struct device_attribute *dev_attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000)); } @@ -202,9 +201,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *dev_attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int res; @@ -224,9 +223,8 @@ static ssize_t set_temp_max(struct device *dev, static ssize_t show_temp_crit(struct device *dev, struct device_attribute *dev_attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000)); } @@ -235,9 +233,9 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *dev_attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int res; @@ -258,9 +256,8 @@ static ssize_t show_temp_emergency(struct device *dev, struct device_attribute *dev_attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000)); } @@ -269,9 +266,9 @@ static ssize_t set_temp_emergency(struct device *dev, struct device_attribute *dev_attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int res; @@ -291,9 +288,8 @@ static ssize_t set_temp_emergency(struct device *dev, static ssize_t show_pwm(struct device *dev, struct device_attribute *dev_attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120); } @@ -302,9 +298,9 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *dev_attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6639_data *data = i2c_get_clientdata(client); struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct max6639_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long val; int res; @@ -378,7 +374,7 @@ static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 5); static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 4); -static struct attribute *max6639_attributes[] = { +static struct attribute *max6639_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp1_fault.dev_attr.attr, @@ -403,10 +399,7 @@ static struct attribute *max6639_attributes[] = { &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr, NULL }; - -static const struct attribute_group max6639_group = { - .attrs = max6639_attributes, -}; +ATTRIBUTE_GROUPS(max6639); /* * returns respective index in rpm_ranges table @@ -424,9 +417,9 @@ static int rpm_range_to_reg(int range) return 1; /* default: 4000 RPM */ } -static int max6639_init_client(struct i2c_client *client) +static int max6639_init_client(struct i2c_client *client, + struct max6639_data *data) { - struct max6639_data *data = i2c_get_clientdata(client); struct max6639_platform_data *max6639_info = dev_get_platdata(&client->dev); int i; @@ -545,50 +538,27 @@ static int max6639_detect(struct i2c_client *client, static int max6639_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct max6639_data *data; + struct device *hwmon_dev; int err; - data = devm_kzalloc(&client->dev, sizeof(struct max6639_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct max6639_data), GFP_KERNEL); if (!data) return -ENOMEM; - i2c_set_clientdata(client, data); + data->client = client; mutex_init(&data->update_lock); /* Initialize the max6639 chip */ - err = max6639_init_client(client); + err = max6639_init_client(client, data); if (err < 0) return err; - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &max6639_group); - if (err) - return err; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto error_remove; - } - - dev_info(&client->dev, "temperature sensor and fan control found\n"); - - return 0; - -error_remove: - sysfs_remove_group(&client->dev.kobj, &max6639_group); - return err; -} - -static int max6639_remove(struct i2c_client *client) -{ - struct max6639_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &max6639_group); - - return 0; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + max6639_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } #ifdef CONFIG_PM_SLEEP @@ -622,9 +592,7 @@ static const struct i2c_device_id max6639_id[] = { MODULE_DEVICE_TABLE(i2c, max6639_id); -static const struct dev_pm_ops max6639_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(max6639_suspend, max6639_resume) -}; +static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume); static struct i2c_driver max6639_driver = { .class = I2C_CLASS_HWMON, @@ -633,7 +601,6 @@ static struct i2c_driver max6639_driver = { .pm = &max6639_pm_ops, }, .probe = max6639_probe, - .remove = max6639_remove, .id_table = max6639_id, .detect = max6639_detect, .address_list = normal_i2c, diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 0cafc390db4..162a520f4bd 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -105,38 +105,13 @@ module_param(clock, int, S_IRUGO); #define DIV_FROM_REG(reg) (1 << (reg & 7)) -static int max6650_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int max6650_init_client(struct i2c_client *client); -static int max6650_remove(struct i2c_client *client); -static struct max6650_data *max6650_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static const struct i2c_device_id max6650_id[] = { - { "max6650", 1 }, - { "max6651", 4 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, max6650_id); - -static struct i2c_driver max6650_driver = { - .driver = { - .name = "max6650", - }, - .probe = max6650_probe, - .remove = max6650_remove, - .id_table = max6650_id, -}; - /* * Client data (each client gets its own) */ struct max6650_data { - struct device *hwmon_dev; + struct i2c_client *client; + const struct attribute_group *groups[3]; struct mutex update_lock; int nr_fans; char valid; /* zero until following fields are valid */ @@ -151,6 +126,51 @@ struct max6650_data { u8 alarm; }; +static const u8 tach_reg[] = { + MAX6650_REG_TACH0, + MAX6650_REG_TACH1, + MAX6650_REG_TACH2, + MAX6650_REG_TACH3, +}; + +static struct max6650_data *max6650_update_device(struct device *dev) +{ + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + data->speed = i2c_smbus_read_byte_data(client, + MAX6650_REG_SPEED); + data->config = i2c_smbus_read_byte_data(client, + MAX6650_REG_CONFIG); + for (i = 0; i < data->nr_fans; i++) { + data->tach[i] = i2c_smbus_read_byte_data(client, + tach_reg[i]); + } + data->count = i2c_smbus_read_byte_data(client, + MAX6650_REG_COUNT); + data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC); + + /* + * Alarms are cleared on read in case the condition that + * caused the alarm is removed. Keep the value latched here + * for providing the register through different alarm files. + */ + data->alarm |= i2c_smbus_read_byte_data(client, + MAX6650_REG_ALARM); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + static ssize_t get_fan(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -235,8 +255,8 @@ static ssize_t get_target(struct device *dev, struct device_attribute *devattr, static ssize_t set_target(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6650_data *data = i2c_get_clientdata(client); + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int kscale, ktach; unsigned long rpm; int err; @@ -304,8 +324,8 @@ static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr, static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6650_data *data = i2c_get_clientdata(client); + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long pwm; int err; @@ -350,8 +370,8 @@ static ssize_t get_enable(struct device *dev, struct device_attribute *devattr, static ssize_t set_enable(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6650_data *data = i2c_get_clientdata(client); + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; int max6650_modes[3] = {0, 3, 2}; unsigned long mode; int err; @@ -400,8 +420,8 @@ static ssize_t get_div(struct device *dev, struct device_attribute *devattr, static ssize_t set_div(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct max6650_data *data = i2c_get_clientdata(client); + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; unsigned long div; int err; @@ -446,7 +466,7 @@ static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct max6650_data *data = max6650_update_device(dev); - struct i2c_client *client = to_i2c_client(dev); + struct i2c_client *client = data->client; int alarm = 0; if (data->alarm & attr->index) { @@ -484,7 +504,8 @@ static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a, int n) { struct device *dev = container_of(kobj, struct device, kobj); - struct i2c_client *client = to_i2c_client(dev); + struct max6650_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN); struct device_attribute *devattr; @@ -519,7 +540,7 @@ static struct attribute *max6650_attrs[] = { NULL }; -static struct attribute_group max6650_attr_grp = { +static const struct attribute_group max6650_group = { .attrs = max6650_attrs, .is_visible = max6650_attrs_visible, }; @@ -531,7 +552,7 @@ static struct attribute *max6651_attrs[] = { NULL }; -static const struct attribute_group max6651_attr_grp = { +static const struct attribute_group max6651_group = { .attrs = max6651_attrs, }; @@ -539,74 +560,17 @@ static const struct attribute_group max6651_attr_grp = { * Real code */ -static int max6650_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct max6650_data *data; - int err; - - data = devm_kzalloc(&client->dev, sizeof(struct max6650_data), - GFP_KERNEL); - if (!data) { - dev_err(&client->dev, "out of memory.\n"); - return -ENOMEM; - } - - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - data->nr_fans = id->driver_data; - - /* - * Initialize the max6650 chip - */ - err = max6650_init_client(client); - if (err) - return err; - - err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp); - if (err) - return err; - /* 3 additional fan inputs for the MAX6651 */ - if (data->nr_fans == 4) { - err = sysfs_create_group(&client->dev.kobj, &max6651_attr_grp); - if (err) - goto err_remove; - } - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (!IS_ERR(data->hwmon_dev)) - return 0; - - err = PTR_ERR(data->hwmon_dev); - dev_err(&client->dev, "error registering hwmon device.\n"); - if (data->nr_fans == 4) - sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp); -err_remove: - sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); - return err; -} - -static int max6650_remove(struct i2c_client *client) +static int max6650_init_client(struct max6650_data *data, + struct i2c_client *client) { - struct max6650_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - if (data->nr_fans == 4) - sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp); - sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); - return 0; -} - -static int max6650_init_client(struct i2c_client *client) -{ - struct max6650_data *data = i2c_get_clientdata(client); + struct device *dev = &client->dev; int config; int err = -EIO; config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG); if (config < 0) { - dev_err(&client->dev, "Error reading config, aborting.\n"); + dev_err(dev, "Error reading config, aborting.\n"); return err; } @@ -620,11 +584,11 @@ static int max6650_init_client(struct i2c_client *client) config |= MAX6650_CFG_V12; break; default: - dev_err(&client->dev, "illegal value for fan_voltage (%d)\n", + dev_err(dev, "illegal value for fan_voltage (%d)\n", fan_voltage); } - dev_info(&client->dev, "Fan voltage is set to %dV.\n", + dev_info(dev, "Fan voltage is set to %dV.\n", (config & MAX6650_CFG_V12) ? 12 : 5); switch (prescaler) { @@ -650,11 +614,10 @@ static int max6650_init_client(struct i2c_client *client) | MAX6650_CFG_PRESCALER_16; break; default: - dev_err(&client->dev, "illegal value for prescaler (%d)\n", - prescaler); + dev_err(dev, "illegal value for prescaler (%d)\n", prescaler); } - dev_info(&client->dev, "Prescaler is set to %d.\n", + dev_info(dev, "Prescaler is set to %d.\n", 1 << (config & MAX6650_CFG_PRESCALER_MASK)); /* @@ -664,17 +627,17 @@ static int max6650_init_client(struct i2c_client *client) */ if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) { - dev_dbg(&client->dev, "Change mode to open loop, full off.\n"); + dev_dbg(dev, "Change mode to open loop, full off.\n"); config = (config & ~MAX6650_CFG_MODE_MASK) | MAX6650_CFG_MODE_OPEN_LOOP; if (i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, 255)) { - dev_err(&client->dev, "DAC write error, aborting.\n"); + dev_err(dev, "DAC write error, aborting.\n"); return err; } } if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) { - dev_err(&client->dev, "Config write error, aborting.\n"); + dev_err(dev, "Config write error, aborting.\n"); return err; } @@ -684,51 +647,55 @@ static int max6650_init_client(struct i2c_client *client) return 0; } -static const u8 tach_reg[] = { - MAX6650_REG_TACH0, - MAX6650_REG_TACH1, - MAX6650_REG_TACH2, - MAX6650_REG_TACH3, -}; - -static struct max6650_data *max6650_update_device(struct device *dev) +static int max6650_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i; - struct i2c_client *client = to_i2c_client(dev); - struct max6650_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); + struct device *dev = &client->dev; + struct max6650_data *data; + struct device *hwmon_dev; + int err; - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - data->speed = i2c_smbus_read_byte_data(client, - MAX6650_REG_SPEED); - data->config = i2c_smbus_read_byte_data(client, - MAX6650_REG_CONFIG); - for (i = 0; i < data->nr_fans; i++) { - data->tach[i] = i2c_smbus_read_byte_data(client, - tach_reg[i]); - } - data->count = i2c_smbus_read_byte_data(client, - MAX6650_REG_COUNT); - data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC); + data = devm_kzalloc(dev, sizeof(struct max6650_data), GFP_KERNEL); + if (!data) + return -ENOMEM; - /* - * Alarms are cleared on read in case the condition that - * caused the alarm is removed. Keep the value latched here - * for providing the register through different alarm files. - */ - data->alarm |= i2c_smbus_read_byte_data(client, - MAX6650_REG_ALARM); + data->client = client; + mutex_init(&data->update_lock); + data->nr_fans = id->driver_data; - data->last_updated = jiffies; - data->valid = 1; - } + /* + * Initialize the max6650 chip + */ + err = max6650_init_client(data, client); + if (err) + return err; - mutex_unlock(&data->update_lock); + data->groups[0] = &max6650_group; + /* 3 additional fan inputs for the MAX6651 */ + if (data->nr_fans == 4) + data->groups[1] = &max6651_group; - return data; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + client->name, data, + data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); } +static const struct i2c_device_id max6650_id[] = { + { "max6650", 1 }, + { "max6651", 4 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6650_id); + +static struct i2c_driver max6650_driver = { + .driver = { + .name = "max6650", + }, + .probe = max6650_probe, + .id_table = max6650_id, +}; + module_i2c_driver(max6650_driver); MODULE_AUTHOR("Hans J. Koch"); diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 330fe117e21..988181e4cfc 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -1225,7 +1225,7 @@ static int pc87360_probe(struct platform_device *pdev) int i; struct pc87360_data *data; int err = 0; - const char *name = "pc87360"; + const char *name; int use_thermistors = 0; struct device *dev = &pdev->dev; @@ -1233,13 +1233,14 @@ static int pc87360_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - data->fannr = 2; - data->innr = 0; - data->tempnr = 0; - switch (devid) { + default: + name = "pc87360"; + data->fannr = 2; + break; case 0xe8: name = "pc87363"; + data->fannr = 2; break; case 0xe4: name = "pc87364"; @@ -1260,7 +1261,6 @@ static int pc87360_probe(struct platform_device *pdev) } data->name = name; - data->valid = 0; mutex_init(&data->lock); mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c index de3c152a1d9..e24ed521051 100644 --- a/drivers/hwmon/pmbus/ltc2978.c +++ b/drivers/hwmon/pmbus/ltc2978.c @@ -1,9 +1,9 @@ /* * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880, - * and LTC3883 + * LTC3883, and LTM4676 * * Copyright (c) 2011 Ericsson AB. - * Copyright (c) 2013 Guenter Roeck + * Copyright (c) 2013, 2014 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> @@ -28,7 +24,7 @@ #include <linux/i2c.h> #include "pmbus.h" -enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 }; +enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 }; /* Common for all chips */ #define LTC2978_MFR_VOUT_PEAK 0xdd @@ -45,7 +41,7 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 }; #define LTC2974_MFR_IOUT_PEAK 0xd7 #define LTC2974_MFR_IOUT_MIN 0xd8 -/* LTC3880 and LTC3883 */ +/* LTC3880, LTC3883, and LTM4676 */ #define LTC3880_MFR_IOUT_PEAK 0xd7 #define LTC3880_MFR_CLEAR_PEAKS 0xe3 #define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 @@ -53,7 +49,8 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 }; /* LTC3883 only */ #define LTC3883_MFR_IIN_PEAK 0xe1 -#define LTC2974_ID 0x0212 +#define LTC2974_ID_REV1 0x0212 +#define LTC2974_ID_REV2 0x0213 #define LTC2977_ID 0x0130 #define LTC2978_ID_REV1 0x0121 #define LTC2978_ID_REV2 0x0122 @@ -62,6 +59,8 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 }; #define LTC3880_ID_MASK 0xff00 #define LTC3883_ID 0x4300 #define LTC3883_ID_MASK 0xff00 +#define LTM4676_ID 0x4480 /* datasheet claims 0x440X */ +#define LTM4676_ID_MASK 0xfff0 #define LTC2974_NUM_PAGES 4 #define LTC2978_NUM_PAGES 8 @@ -370,6 +369,7 @@ static const struct i2c_device_id ltc2978_id[] = { {"ltc2978", ltc2978}, {"ltc3880", ltc3880}, {"ltc3883", ltc3883}, + {"ltm4676", ltm4676}, {} }; MODULE_DEVICE_TABLE(i2c, ltc2978_id); @@ -394,7 +394,7 @@ static int ltc2978_probe(struct i2c_client *client, if (chip_id < 0) return chip_id; - if (chip_id == LTC2974_ID) { + if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) { data->id = ltc2974; } else if (chip_id == LTC2977_ID) { data->id = ltc2977; @@ -405,6 +405,8 @@ static int ltc2978_probe(struct i2c_client *client, data->id = ltc3880; } else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) { data->id = ltc3883; + } else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID) { + data->id = ltm4676; } else { dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); return -ENODEV; @@ -458,6 +460,7 @@ static int ltc2978_probe(struct i2c_client *client, } break; case ltc3880: + case ltm4676: info->read_word_data = ltc3880_read_word_data; info->pages = LTC3880_NUM_PAGES; info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN @@ -500,5 +503,5 @@ static struct i2c_driver ltc2978_driver = { module_i2c_driver(ltc2978_driver); MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, and LTC3883"); +MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c index d9e1b7de78d..4ef5802df6d 100644 --- a/drivers/hwmon/smm665.c +++ b/drivers/hwmon/smm665.c @@ -222,7 +222,7 @@ static int smm665_read_adc(struct smm665_data *data, int adc) rv = i2c_smbus_read_word_swapped(client, 0); if (rv < 0) { dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv); - return -1; + return rv; } /* * Validate/verify readback adc channel (in bit 11..14). diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index df585808adb..4068db4d958 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1376,7 +1376,6 @@ w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id) return -ENOMEM; i2c_set_clientdata(client, data); - data->valid = 0; mutex_init(&data->update_lock); err = w83792d_detect_subclients(client); diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 6384b268f59..ac304312201 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -188,12 +188,8 @@ static int w83l785ts_probe(struct i2c_client *client, return -ENOMEM; i2c_set_clientdata(client, data); - data->valid = 0; mutex_init(&data->update_lock); - /* Default values in case the first read fails (unlikely). */ - data->temp[1] = data->temp[0] = 0; - /* * Initialize the W83L785TS chip * Nothing yet, assume it is already started. |