summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig2
-rw-r--r--drivers/hwmon/adm1031.c43
-rw-r--r--drivers/hwmon/coretemp.c57
-rw-r--r--drivers/hwmon/emc1403.c1
-rw-r--r--drivers/hwmon/f71882fg.c32
-rw-r--r--drivers/hwmon/f75375s.c6
-rw-r--r--drivers/hwmon/hp_accel.c2
-rw-r--r--drivers/hwmon/lis3lv02d.c4
-rw-r--r--drivers/hwmon/lis3lv02d_i2c.c4
-rw-r--r--drivers/hwmon/lis3lv02d_spi.c4
-rw-r--r--drivers/hwmon/lm95241.c21
-rw-r--r--drivers/hwmon/pkgtemp.c23
-rw-r--r--drivers/hwmon/w83627ehf.c1
13 files changed, 111 insertions, 89 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4d4d09bdec0..97499d00615 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -409,7 +409,7 @@ config SENSORS_CORETEMP
config SENSORS_PKGTEMP
tristate "Intel processor package temperature sensor"
- depends on X86 && PCI && EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the package level temperature
sensor inside your CPU. Check documentation/driver for details.
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 15c1a9616af..0683e6be662 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -79,7 +79,7 @@ struct adm1031_data {
int chip_type;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- unsigned int update_rate; /* In milliseconds */
+ unsigned int update_interval; /* In milliseconds */
/* The chan_select_table contains the possible configurations for
* auto fan control.
*/
@@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
-/* Update Rate */
-static const unsigned int update_rates[] = {
+/* Update Interval */
+static const unsigned int update_intervals[] = {
16000, 8000, 4000, 2000, 1000, 500, 250, 125,
};
-static ssize_t show_update_rate(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t show_update_interval(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1031_data *data = i2c_get_clientdata(client);
- return sprintf(buf, "%u\n", data->update_rate);
+ return sprintf(buf, "%u\n", data->update_interval);
}
-static ssize_t set_update_rate(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t set_update_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1031_data *data = i2c_get_clientdata(client);
@@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev,
if (err)
return err;
- /* find the nearest update rate from the table */
- for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
- if (val >= update_rates[i])
+ /*
+ * Find the nearest update interval from the table.
+ * Use it to determine the matching update rate.
+ */
+ for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) {
+ if (val >= update_intervals[i])
break;
}
- /* if not found, we point to the last entry (lowest update rate) */
+ /* if not found, we point to the last entry (lowest update interval) */
/* set the new update rate while preserving other settings */
reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
@@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev,
adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
mutex_lock(&data->update_lock);
- data->update_rate = update_rates[i];
+ data->update_interval = update_intervals[i];
mutex_unlock(&data->update_lock);
return count;
}
-static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
- set_update_rate);
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+ set_update_interval);
static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
- &dev_attr_update_rate.attr,
+ &dev_attr_update_interval.attr,
&dev_attr_alarms.attr,
NULL
@@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client)
mask = ADM1031_UPDATE_RATE_MASK;
read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
- data->update_rate = update_rates[i];
+ /* Save it as update interval */
+ data->update_interval = update_intervals[i];
}
static struct adm1031_data *adm1031_update_device(struct device *dev)
@@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
mutex_lock(&data->update_lock);
- next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+ next_update = data->last_updated
+ + msecs_to_jiffies(data->update_interval);
if (time_after(jiffies, next_update) || !data->valid) {
dev_dbg(&client->dev, "Starting adm1031 update\n");
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index de8111114f4..a23b17a78ac 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,6 +36,7 @@
#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/smp.h>
#define DRVNAME "coretemp"
@@ -423,9 +424,18 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+ /*
+ * CPUID.06H.EAX[0] indicates whether the CPU has thermal
+ * sensors. We check this bit only, all the early CPUs
+ * without thermal sensors will be filtered out.
+ */
+ if (!cpu_has(c, X86_FEATURE_DTS)) {
+ printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
+ " has no thermal sensor.\n", c->x86_model);
+ return 0;
+ }
mutex_lock(&pdev_list_mutex);
@@ -482,14 +492,22 @@ exit:
static void coretemp_device_remove(unsigned int cpu)
{
- struct pdev_entry *p, *n;
+ struct pdev_entry *p;
+ unsigned int i;
+
mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
- if (p->cpu == cpu) {
- platform_device_unregister(p->pdev);
- list_del(&p->list);
- kfree(p);
- }
+ list_for_each_entry(p, &pdev_list, list) {
+ if (p->cpu != cpu)
+ continue;
+
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ mutex_unlock(&pdev_list_mutex);
+ kfree(p);
+ for_each_cpu(i, cpu_sibling_mask(cpu))
+ if (i != cpu && !coretemp_device_add(i))
+ break;
+ return;
}
mutex_unlock(&pdev_list_mutex);
}
@@ -527,30 +545,21 @@ static int __init coretemp_init(void)
if (err)
goto exit;
- for_each_online_cpu(i) {
- struct cpuinfo_x86 *c = &cpu_data(i);
- /*
- * CPUID.06H.EAX[0] indicates whether the CPU has thermal
- * sensors. We check this bit only, all the early CPUs
- * without thermal sensors will be filtered out.
- */
- if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01))
- coretemp_device_add(i);
- else {
- printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
- " has no thermal sensor.\n", c->x86_model);
- }
- }
+ for_each_online_cpu(i)
+ coretemp_device_add(i);
+
+#ifndef CONFIG_HOTPLUG_CPU
if (list_empty(&pdev_list)) {
err = -ENODEV;
goto exit_driver_unreg;
}
+#endif
register_hotcpu_notifier(&coretemp_cpu_notifier);
return 0;
-exit_driver_unreg:
#ifndef CONFIG_HOTPLUG_CPU
+exit_driver_unreg:
platform_driver_unregister(&coretemp_driver);
#endif
exit:
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 5b58b20dead..8dee3f38fdf 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -308,7 +308,6 @@ static int emc1403_probe(struct i2c_client *client,
res = sysfs_create_group(&client->dev.kobj, &m_thermal_gr);
if (res) {
dev_warn(&client->dev, "create group failed\n");
- hwmon_device_unregister(data->hwmon_dev);
goto thermal_error1;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 537841ef44b..75afb3b0e07 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -111,7 +111,7 @@ static struct platform_device *f71882fg_pdev;
/* Super-I/O Function prototypes */
static inline int superio_inb(int base, int reg);
static inline int superio_inw(int base, int reg);
-static inline void superio_enter(int base);
+static inline int superio_enter(int base);
static inline void superio_select(int base, int ld);
static inline void superio_exit(int base);
@@ -861,11 +861,20 @@ static int superio_inw(int base, int reg)
return val;
}
-static inline void superio_enter(int base)
+static inline int superio_enter(int base)
{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ base);
+ return -EBUSY;
+ }
+
/* according to the datasheet the key must be send twice! */
outb(SIO_UNLOCK_KEY, base);
outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
}
static inline void superio_select(int base, int ld)
@@ -877,6 +886,7 @@ static inline void superio_select(int base, int ld)
static inline void superio_exit(int base)
{
outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
}
static inline int fan_from_reg(u16 reg)
@@ -2175,21 +2185,15 @@ static int f71882fg_remove(struct platform_device *pdev)
static int __init f71882fg_find(int sioaddr, unsigned short *address,
struct f71882fg_sio_data *sio_data)
{
- int err = -ENODEV;
u16 devid;
-
- /* Don't step on other drivers' I/O space by accident */
- if (!request_region(sioaddr, 2, DRVNAME)) {
- printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
- (int)sioaddr);
- return -EBUSY;
- }
-
- superio_enter(sioaddr);
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
pr_debug(DRVNAME ": Not a Fintek device\n");
+ err = -ENODEV;
goto exit;
}
@@ -2213,6 +2217,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
(unsigned int)devid);
+ err = -ENODEV;
goto exit;
}
@@ -2223,12 +2228,14 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ err = -ENODEV;
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ err = -ENODEV;
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
@@ -2239,7 +2246,6 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
- release_region(sioaddr, 2);
return err;
}
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 0f58ecc5334..9638d58f99f 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -79,7 +79,7 @@ enum chips { f75373, f75375 };
#define F75375_REG_PWM2_DROP_DUTY 0x6C
#define FAN_CTRL_LINEAR(nr) (4 + nr)
-#define FAN_CTRL_MODE(nr) (5 + ((nr) * 2))
+#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2))
/*
* Data structures and manipulation thereof
@@ -298,7 +298,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
- fanmode = ~(3 << FAN_CTRL_MODE(nr));
+ fanmode &= ~(3 << FAN_CTRL_MODE(nr));
switch (val) {
case 0: /* Full speed */
@@ -350,7 +350,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->update_lock);
conf = f75375_read8(client, F75375_REG_CONFIG1);
- conf = ~(1 << FAN_CTRL_LINEAR(nr));
+ conf &= ~(1 << FAN_CTRL_LINEAR(nr));
if (val == 0)
conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 7580f55e67e..36e95753223 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -221,6 +221,8 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
+ AXIS_DMI_MATCH("HPB532x", "HP ProBook 532", y_inverted),
+ AXIS_DMI_MATCH("Mini5102", "HP Mini 5102", xy_rotated_left_usd),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 6138f036b15..fc591ae5310 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -277,7 +277,7 @@ static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
wake_up_interruptible(&lis3_dev.misc_wait);
kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
out:
- if (lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
+ if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
lis3_dev.idev->input->users)
return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
@@ -718,7 +718,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
- if (dev->whoami == WAI_8B)
+ if (dev->pdata && dev->whoami == WAI_8B)
thread_fn = lis302dl_interrupt_thread1_8b;
else
thread_fn = NULL;
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index dc1f5402c1d..8e5933b72d1 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -121,7 +121,7 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
{
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
- if (!lis3->pdata->wakeup_flags)
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
lis3lv02d_poweroff(lis3);
return 0;
}
@@ -130,7 +130,7 @@ static int lis3lv02d_i2c_resume(struct i2c_client *client)
{
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
- if (!lis3->pdata->wakeup_flags)
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
lis3lv02d_poweron(lis3);
return 0;
}
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 82b16808a27..b9be5e3a22b 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -92,7 +92,7 @@ static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg)
{
struct lis3lv02d *lis3 = spi_get_drvdata(spi);
- if (!lis3->pdata->wakeup_flags)
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
lis3lv02d_poweroff(&lis3_dev);
return 0;
@@ -102,7 +102,7 @@ static int lis3lv02d_spi_resume(struct spi_device *spi)
{
struct lis3lv02d *lis3 = spi_get_drvdata(spi);
- if (!lis3->pdata->wakeup_flags)
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
lis3lv02d_poweron(lis3);
return 0;
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 94741d42112..464340f2549 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -91,7 +91,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev);
struct lm95241_data {
struct device *hwmon_dev;
struct mutex update_lock;
- unsigned long last_updated, rate; /* in jiffies */
+ unsigned long last_updated, interval; /* in jiffies */
char valid; /* zero until following fields are valid */
/* registers values */
u8 local_h, local_l; /* local */
@@ -114,23 +114,23 @@ show_temp(local);
show_temp(remote1);
show_temp(remote2);
-static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct lm95241_data *data = lm95241_update_device(dev);
- snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ);
+ snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval / HZ);
return strlen(buf);
}
-static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm95241_data *data = i2c_get_clientdata(client);
- strict_strtol(buf, 10, &data->rate);
- data->rate = data->rate * HZ / 1000;
+ strict_strtol(buf, 10, &data->interval);
+ data->interval = data->interval * HZ / 1000;
return count;
}
@@ -286,7 +286,8 @@ static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
-static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate);
+static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
+ set_interval);
static struct attribute *lm95241_attributes[] = {
&dev_attr_temp1_input.attr,
@@ -298,7 +299,7 @@ static struct attribute *lm95241_attributes[] = {
&dev_attr_temp3_min.attr,
&dev_attr_temp2_max.attr,
&dev_attr_temp3_max.attr,
- &dev_attr_rate.attr,
+ &dev_attr_update_interval.attr,
NULL
};
@@ -376,7 +377,7 @@ static void lm95241_init_client(struct i2c_client *client)
{
struct lm95241_data *data = i2c_get_clientdata(client);
- data->rate = HZ; /* 1 sec default */
+ data->interval = HZ; /* 1 sec default */
data->valid = 0;
data->config = CFG_CR0076;
data->model = 0;
@@ -410,7 +411,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev)
mutex_lock(&data->update_lock);
- if (time_after(jiffies, data->last_updated + data->rate) ||
+ if (time_after(jiffies, data->last_updated + data->interval) ||
!data->valid) {
dev_dbg(&client->dev, "Updating lm95241 data.\n");
data->local_h =
diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index 74157fcda6e..f11903936c8 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -33,7 +33,6 @@
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
-#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
@@ -224,7 +223,7 @@ static int __devinit pkgtemp_probe(struct platform_device *pdev)
err = sysfs_create_group(&pdev->dev.kobj, &pkgtemp_group);
if (err)
- goto exit_free;
+ goto exit_dev;
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -238,6 +237,8 @@ static int __devinit pkgtemp_probe(struct platform_device *pdev)
exit_class:
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+exit_dev:
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
exit_free:
kfree(data);
exit:
@@ -250,6 +251,7 @@ static int __devexit pkgtemp_remove(struct platform_device *pdev)
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -281,9 +283,10 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+ if (!cpu_has(c, X86_FEATURE_PTS))
+ return 0;
mutex_lock(&pdev_list_mutex);
@@ -339,17 +342,18 @@ exit:
#ifdef CONFIG_HOTPLUG_CPU
static void pkgtemp_device_remove(unsigned int cpu)
{
- struct pdev_entry *p, *n;
+ struct pdev_entry *p;
unsigned int i;
int err;
mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
+ list_for_each_entry(p, &pdev_list, list) {
if (p->cpu != cpu)
continue;
platform_device_unregister(p->pdev);
list_del(&p->list);
+ mutex_unlock(&pdev_list_mutex);
kfree(p);
for_each_cpu(i, cpu_core_mask(cpu)) {
if (i != cpu) {
@@ -358,7 +362,7 @@ static void pkgtemp_device_remove(unsigned int cpu)
break;
}
}
- break;
+ return;
}
mutex_unlock(&pdev_list_mutex);
}
@@ -399,11 +403,6 @@ static int __init pkgtemp_init(void)
goto exit;
for_each_online_cpu(i) {
- struct cpuinfo_x86 *c = &cpu_data(i);
-
- if (!cpu_has(c, X86_FEATURE_PTS))
- continue;
-
err = pkgtemp_device_add(i);
if (err)
goto exit_devices_unreg;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index e96e69dd36f..072c58008a6 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -127,6 +127,7 @@ superio_enter(int ioreg)
static inline void
superio_exit(int ioreg)
{
+ outb(0xaa, ioreg);
outb(0x02, ioreg);
outb(0x02, ioreg + 1);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 05:43:55 +0000